Unable To Get Ride This Ip Address - Flushed Dns Ipconfig
Jan 22, 2008
I am using toad for oracle development. Whenever i perform any operation in toad, it goes to an ip address to resolve the database server name. That IP address was previously used as our dns server but no more exists in our network. I flushed by dns using ipconfig /flushdns commad but unable to get ride of this IP address. Also I have reinstalled my oracle client and toad but that IP address is alwayes there.
Can any body suggest me some way to find out where this entry exist in windows DNS setting.
View 12 Replies
ADVERTISEMENT
Oct 17, 2005
I have issue in 2 of my computers. I lost internet connectivity. I run on Wired DSL connection ( always on ). I did try to check ipaddress of my computer and it ends up with Internal error
" An internal error occurred: the system cannot find the file specified. Additional information: Unable to query hostname " after googleing over internet i found that if we replace tcpip.sys from
c:windowssystem32drivers
View 3 Replies
View Related
Nov 16, 2008
I am installing a new workstation at work that is networked with all others. Its purpose is to be a training station that can be logged into by anyone using their own logins.Each user has their own default printer (eg home office) is it possible for this workstation to override the default and select the attached local printer as the default whilst logged onto this pc?
View 2 Replies
View Related
Mar 7, 2005
At first the application tab appears flushed to right and now I hv 2 sets of toolbars sitting at the bottom of my screen,can I remove it?
View 5 Replies
View Related
Apr 2, 2007
Windows 2000 (SP4) O/S.The machine will temporarily get an IP addres and then it will drop off.I have run ipconfig and been shown all 0's and then unplug then teplug the cable and get an IP address, but when I go to get on line or open a network drive it fails. I then go back and ipconfig again and it is back to 0's.
I have swapped out the network cables and the user is on a new machine than previously used and is stil experiencing the same problem.When I do an ipconfig /renew it faisl with a DHCP Serer Unreachable error.
View 5 Replies
View Related
Apr 21, 2006
I keep getting an error message that the network is unable allocate an ip address to my computer ive had this problem before in australia and some tech support guy fixed it for me but i cant remember what it was that he did
View 1 Replies
View Related
Dec 28, 2005
Unable to access the import and export options in the file menu of the address book and not sure if this makes any difference.
View 11 Replies
View Related
Oct 8, 2008
I am unable to open any hyperlink or any website that is contained in my microsoft outlook email.I get the following error messages.
"Windows cannot open this file. Windows needs to know what program created it"
It gives me two choices: 1. use the web to find the program that created it or 2. select from a list. None of these options work. I hope that someone can help solve this problem as I am now unable to open any link or web contained in the email.
View 2 Replies
View Related
Aug 14, 2008
I am running xp pro. I can not get an internet connection through my ethernet card. When I hook up my modem through usb it works fine but unable to utilize my full download speed capabilities. Hooked the modem up via ethernet to laptop and it worked just fine. The only thing I can find wrong that I don't know how to fix or what is causing it is the fact that the physical address of the card comes up as the broadcast address (FF-FF-FF-FF-FF-FF). Very strange.
View 14 Replies
View Related
Aug 5, 2005
I opened my computer and decided to goto internet through the my computer window. So I pressed home button of my key board so the My Computer window converted to a web page. But after that the address bar disappeared. I closed the window and restart the machine and opened the internet explorer, but still address bar is missing. I checked under the tools and I can see the tick infront of the address bar.
View 3 Replies
View Related
Oct 12, 2006
We have run across a problem here with APIPA addressing. After we install Windows updates, Windows assigns an APIPA address in the 169.254.x.x range, instead of getting an address from the DHCP server. The effect is that the computer loses connectivity with the network and the Internet. You can confirm this problem by running an IPCONFIG and checking for an address in the 169.254 range.
Releasing and renewing the address does not correct the problem. Assigning a static IP address resolved the issue. Searching the Microsoft Knowledge Base, we found a registry hack that will disable APIPA addressing on the computer, and this does correct the problem so the computer can connect to the network again. We assume that the problem is a result of an update from last Tuesday, but we have not determined which update is the problem. We are still looking. Our concern is that as DHCP leases expire with computers in the field, that this effect may appear. If you get calls for loss of network or Internet connectivity, have the user run IPCONFIG, and if they have an APIPA address, the registry hack is outlined in KB article
View 2 Replies
View Related
Nov 15, 2005
I am using Windows XP Home edition. How do you delete an address from the list of automatic webb address list in the Address box? I tried highlighting it and entering delete but it doesn't get deleted.
View 3 Replies
View Related
Apr 25, 2010
I am running windows xp. When i run ipconfig it flashes off the screen before I get a chance to read it.I clicked run - then typed cmd and got to the dos screen - then I typed ipconfig and the screen flashes off so fast I do not get a chance to read it - how do I get the dos screen to stay on?? Remember I first went to run then typed cmd then at the dos screen I typed ipconfig.I researching this problem all I get is that I should click run then type cmd then type ipconfig. I did all that but screen still flashes off.
View 2 Replies
View Related
Mar 27, 2010
When I try to go to the ipconfig command line in xp, I get this message: is not recognized as an internal or external command, operable program or batch file. I was trying to clean my DNS cache.
View 6 Replies
View Related
May 22, 2006
on another thread, i'm looking for an answer to a problem with my daughter's computer and her dsl connection i was asked to run ipconfig/all on both my computer, that works well with dsl modem, and her's, which doesn't. the command prompt brings this error message "'IPCONFIG' is not recognized as an internal or external command, operable program or batch file."
View 10 Replies
View Related
Dec 11, 2007
I have an issue with MS-DOS prompt on my XP SP 2 machine. It doesnt understand what "ipconfig" is. Other commands work like dir, but ipconfig does not work. Basically says its an unrecognizeable command or something like that.
View 14 Replies
View Related
Oct 17, 2005
after every use of internet i delete history,cookies and files by using internet option(tool menu)but some address stays and they never get delete please can somebody tell how to delete those from address bar.
View 6 Replies
View Related
Mar 21, 2005
Not sure if this is the right place to ask this question, so I hope you will excuse me as it is my first time here. This question is from my brother who cannot get a web address to enter into his address section on IE. What might you suggest he do so I can pass your information on?
View 6 Replies
View Related
Apr 6, 2007
connecting to a specific website and contacted my ISP as i was being blocked by someone and still am. I then installed a IP blocker and since have been able to connect. When i contacted the ISP they were getting me to do a heap of things with ipconfig netish ip reset and a few of ipconfig commands. Since ive done all these my home network hasnt been able to work. I have gone back into My Network and done the network wizard again and again I have also reinstalled another network card and still wont work. I have assigned IP address to all computers on the network. On all other computers you can see everyones computer with the exception of the host. The host computer cant been seen on the network and cant access any other computer as well. The internet wont work on any other computer either but the host internet works. i have another bootable HDD and booted from it and everything works fine.
View 3 Replies
View Related
Sep 19, 2007
Before I reinstall the OS,,, does anyone have the fix for DHCP issues. When I run ipconfig I get the internal error occured error. I have tried to retstart TCP/IP, I changed the name of the PC and ther group name then rebooted but notta.
View 3 Replies
View Related
Dec 17, 2005
I changed my path setting recently .When I type in these commands I get 'not recognized as internal or external command
View 4 Replies
View Related
Mar 10, 2010
When I run ipconfig, DOS window shut back down again quickly. Is this normal? Thought I could use it to monitor IP's connected to me?
View 14 Replies
View Related
Feb 6, 2006
I made a mistake when I moved into a house that doesn’t have high speed Internet. I signed up for netzero to get me through the months that I will not have high speed. I installed their software then their software downloaded some more software that is still locking my computer up on occasion, even after I have uninstalled their software. It doesn't lock it up totally it just doesn't let me run any other programs and it doesn't let me log off (even through CTRL ALT DEL). It also runs a program in called ipconfig.exe that never seems to finish running
View 3 Replies
View Related
Aug 8, 2005
when trying to type a command in MS-DOS, I get the below error message. This is the same for an IPCONFIG or a PING command. Does anyone know how to correct this? I have win XP SP1 'ipconfig' is not recognized as an internal or external command,operable program or batch file.
View 2 Replies
View Related
Aug 22, 2009
You see my cmd is working fine. Then one day I open run and type in cmd and then enter. I type in ipconfig and it says ipconfig isn't an external command or something like that. Anyways I fixed the problem by typing in run C:WINDOWSsystem32cmd.exe and enter. Weird enough it worked when i typed in ipconfig, and other commands. If I typed in cmd that was open from the run any commands wouldn't work. I tried creating an shortcut from the actual cmd file and trying commands but it still doesn't work. Well sometimes I code stuff or download .bat files because I need of em. And I try to open the file but it always usually runs fine but after that incident I try to open any .bat file and it just opens it and the window closes so fast. I don't know how to fix this problem uahghhh it's a pain in the butt lol. It's getting me so mad! I just want to use my normal cmd .
View 14 Replies
View Related
Jun 8, 2006
I have an old computer that is hooked up directly to the cable modem. The pc runs Windows 2000. When I start up the pc, I can't get on the internet, I have to goto the command prompt and type in "ipconfig /renew" and it renews the ip address, which lets me get on to the net. I have to do this everytime I start the pc and it's a big pain. It sometimes takes up to 2 minutes to get an ip address. The ip address is set to 0.0.0.0 before I do the renew. My question is how do I get the computer to get an ip when the pc is started. I have a Motorola surboard sb4100 cable modem if that helps. The pc is running windows 2000 and I have Zonealarm, and Spysweeper running (and no Av programs). If I hook up my laptop (running XP Pro SP2), it works fine, I can get on the net without renewing.
View 13 Replies
View Related
Aug 2, 2008
A friend of mine did who knows what to his computer using some data cleaning software, called secure clean. He set it to run and automatically shut down the PC when finished. Upon reboot, his taskbar was a different color, he was shown a message requesting that he log in with a user that has administrative privileges, his internet connection was gone (ipconfig showed 0.0.0.0 on everything, and ipconfig /renew said "RPC server unavailable"....even though the Administrative Tools>Services applet shows it to be "started").System Restore is not an option, as it was disabled a month ago in hopes of solving another unrelated problem.
View 3 Replies
View Related
Apr 8, 2005
Before I did a complete restore of windows home edition, I copied my windows address book to a floppy disk. Now when I go to copy the floppy back to windows address book an error occurs and it won't copy. could it have something to do with a mark that looks like this~.
View 1 Replies
View Related
Oct 31, 2008
when i start my pc i get this message which takes a couple of clicks to remove "access violation at address 46243 cof.read of address 46243 cof" but it does not seem to affect my pc,just annoying..
View 1 Replies
View Related
Sep 2, 2005
when i type a url in the address bar the system will nt respond and also when i hit the down arrow next to the address bar to see previously visited sites the same thing happens , however if i click favorite sites the pages load up normally or if i google a site and click on it it loads normally?
View 1 Replies
View Related
Apr 8, 2005
How do I get my IP address
View 2 Replies
View Related
