Unable To Get Custom Paper Size While Installing Dot-matrix Printer?
Oct 3, 2006I am not getting custom paper size when i m installing dotmatrix printer in windows XP!!!!is ther anyway to get custom paper size in winxp?
View 7 RepliesI am not getting custom paper size when i m installing dotmatrix printer in windows XP!!!!is ther anyway to get custom paper size in winxp?
View 7 RepliesMy printer puts out blank paper whenever I request a print from Microsoft Word, Wordpad, or note pad. I cannot do a command prompt. Everything is fine with internet outlook express. Printer does a self check very well.
View 9 Replies View RelatedI had printer sharing set up the first time everything went smoothly. I have 2 pc's on a network 1 is xp home the other xp pro. I had to do a clean reinstall of my operating system on xp pro.Now I've right clicked on my printer on xp home entered the printers name as printer 1. When I go to my other computer and run the wizard I get a box come up saying printer and underneath a larger box.What have I got to put in the printer box my printer is a Lexmark X1100 Series.In the lower box this is where I have had printer names appearing in the past although mine was'ent there I am now getting 'Microsoft windows network' coming up.When i click on the next button I get 'you need to specify a valid printer name.
View 11 Replies View RelatedI am running Windows XP, i want to change my virtual memory to custom page file size, can someone tell me the ideal minimum and maximum sizes recommended.
View 8 Replies View RelatedI've got my whole life on this stupid computer and have not backed up my hd's at all. Anyone willing to send me copies of the restore discs
View 5 Replies View RelatedI was just installing XP on a 10 GB hard drive. When I was installing it it told me all other data etc would be los I said ok etc. After the install I see the C drive is almost full at 7.93 GB. Is this how much XP takes up? I did not think it would take up so much space. This is not my computer so I am not about to change the hd
View 14 Replies View RelatedAny WIN XP help pages? I have used win 98 for years, and now have win xp and can't install my printer or anything.
View 6 Replies View RelatedWhen I installing the software for HP printer on Windows XP professional I get a message at the end = can not find the INF file.
View 4 Replies View RelatedInstalled the XP Windows Fax Service but the local Fax printer didn't install and I can't find a way to install the Fax printer so I can use the Fax Service.
View 16 Replies View RelatedCan someone tell me what size computer i need to install xp, Im mucking with a computer my son was given, its a 3 gig and has 32 meg of ram, I know that it wont fit on there, but wondering if it was worth upgrading it
View 7 Replies View RelatedI had installed RegCure last night and then uninstalled it since it wasn't working properly.This morning when I turned on my computer, I found out my system font has changed dramatically.The font appears to be a spin off of WingDings, but I can't tell. I can get on the internet and IM no problem, but as for finding something on my start menu, or trying to navigate to my system preferences is an impossibility.Also, on the internet and IM, everything is bold and the font is larger.
View 1 Replies View RelatedI am having a problem with my printer after installing network magic. Everytime I send a document from the main pc to the printer connected directly to it, I get a stop screen and a reboot. When it comes back I do the Microsoft error report and it says there is a problem with a driver.
View 2 Replies View RelatedRunning WindowsXP with SP2. Word 2003. OE6. IE6. Have HP 1210 all-in-one and Canon BJC2010. Both work fine. Problem when I wish to print a document, or e-mail text, or whatever, and click on ctrl+P, or use File menu, or whatever, I always get the printer I do not want to use. I use the HP for scanning and copying, particularly in color, and prefer the Canon for regular printing from Word or OE or IE. But somehow each time, I get the HP rather than the Canon. Now on the window for printing they always have a list of options, so this is not a crisis, just a request to lower the nuisance titre a bit. There should be a place to go to select a default printer.
View 4 Replies View Relatedmy i cant print my document from hp printer?
View 1 Replies View RelatedI have established an Ethernet LAN between my Windows XP HOME SP2 and my
Windows XP Professional SP2 PCs. I have printer sharing set in both
PCs. The XP Pro PC can see and print on all of the printers on the XP
Home machine. However the XP HOME PC can see the XP Pro PC on the
network but no access to the XP Pro machine is permitted. I get an
error message relating to "Incorrect Logon type" When I click on the XP
Pro PC Icon on the XP Home machine. I've read and tried everything I
coule find on the subject with no luck.
I recently had to re-install WXP on my computer. The task bar at the bottom of the screen is the normal size (if there is a normal) but when I actived Quick Launch so icons would appear in the taskbar, it doubled in size. The icons adjacent to the Start button are lined up horizantally but the icons in the system try are in groups. I have tried re-sizing the taskbar by placing the cursor on the upper edge where a up and down arrow appears but I cannot drag the taskbar down to make it smaller. I deactivated quick launch, locked the task bar and then re-actived quick launch but it still increases is size. Can anyone tell me how to resolve this issue?
View 5 Replies View RelatedIf I want to print a document in Landscape format that I have typed in Word, I click on Print/Properties/Basics/Landscape/OK, and it still prints out as vertical or Portrait. How can I get it to print in horizontal or Landscape format?
View 1 Replies View RelatedI have a 3-computer home workgroup that connects to the internet via a Netgear router. I have a Lexmark X74-75 printer/scanner/copier that is connect to one of those computers, and that computer is connected directly to the router. The other two computers print to the Lexmark via sharing. This setup has been working without issue for about 2 years, but in the past week, everything seems to have gone to hell, including the ability to print. This description may be a little long,but I have to be everything I am about to relate is somehow connected.I will do my best to also advise what I have installed, removed, etc., during that period.
View 8 Replies View RelatedSince updating to sp2 unable to install printer.Also wizard not avaiable to
install scanner or fax.Can anyoe advise?
I finally need to update to Vista. My PC still works well, it's just been having some problems lately. Anyway, The reason for this thread is because something bizarre happened. I had just sent 2 or 3 files to the Recycle Bin. Then I right-clicked it and hit "Empty Recycle Bin". It deleted the files; that's all well and fine. Then I noticed, that after I deleted them, the icon had paper in the bin like there were files in it. So I opened it and saw nothing. I closed that and saw the icon still said there were files in it. So I right-clicked, hit "Empty Recycle Bin", then saw the same old "Are you sure you want to delete (insert file)?" message. Instinctively, I hit "Yes" and started reading what file it was while clicking it. BAM. The file was I thought for sure my PC was screwed for good. But I checked in "HP_PAVILION C" and it was still there, I looked again at the "Recycle Bin" and everything was fine.
View 6 Replies View RelatedI was working when my system seemed to go a bit crazy, bunch of windows opened up and told me that my virus protection was not working etc.. I closed them all and ran a quick scan with Symtec to see if I had somehow picked up a virus. Decided to reboot. When I restarted the computer I had this strange circle going on. It goes thru a normal bootup, and when it is loading the tray, it starts going in a circle. Starts loading up programs and then restarts and then restarts etc. Most of the time, after 3 or 4 times it ends with just the wall paper visable. Now, at this point the computer seems ok, I can run most any program by starting them in Task Manager ( applications, new task etc...). In fact that is how I signed up for this forum and wrote the note. BUT I cannot get the desktop back. The only way is to run Windows Explorer, via task manager, then you get it back, but it does the circle thing continously. IF you can get a program started during the part of the circle where icons etc are visable, then it will run. SO, I tried doing a restore, went back one day and ran the restore. Seemed to run normally. BUT the symptoms are the same ( now it was close to midnight, so I should have gone back farther). NOW, when I tried to go and do another restore, to go back farther, the restore program runs normally, except it will not let me choose a day. Shows many possible days and the help runs etc.. the buttons "push" but nothing happens.
View 6 Replies View Relatedcomputer keeps giving me this error message and also nphmon06.exe unable to locate component. It won't recognize my hp PSC 2350 all in one printer all of a sudden and I can't get my printer to work because of this. Can someone please tell me how I can remedy this situation? I already tried deleting the download for the printer twice and downloaded it again but I still keep getting this error message. I am at my wits end and need to use my printer.
View 1 Replies View RelatedI can't remove software from my computer relating to my printer "epson"!
View 2 Replies View RelatedI used to be able to select text and check the box that says selection and only what i selected would print. That box is now grayed out ALL the time. How can this be fixed?
my primary printer is a Brother MFC-8670DN wired to ethernet.Operating system is XP home SP3.
Recently my Dell Dimension 4600 became badly infected. Malwarebytes antimalware and Spybot Search and Destroy now declare my PC virus free, but I have one artifact of the infection. Control panel as well as my software no longer sees my HP8450 printer. This problem first appeared when I was infected, this did not occur during or after cleaning. HP's online troubleshooter does not solve the problem. Further, I am unable to reinstall the printer; I have the original install CD and when prompted, Windows install wizard doesn't recognize the files on the CD. Trying a version of the software downloaded from HP's website, the install sees the device but cannot complete the install. I can't uninstall the printer because Control Panel doesn't recognize it as being installed. The printer is connected via USB cable and all of my other USB devices (mouse, keyboard, external hard drive) all work as they should. The printer was fully operational before the virus infections (Virtumonde.prx and Win32.TDSS.rtk).
View 6 Replies View RelatedI am unable to reinstall my Epsom printer software due to the following message :
THE SYSTEM FILE IS NOT SUITABLE FOR RUNNING MS-DOS AND MICROSOFT WINDOWS APPLICATIONS.
We have our own printer driver which basically prints any document to our application (just like Adobe). Our installer creates a named printer port in HKEY_LOACL_MACHINESOFTWAREMicrosoftWindows NTPorts (eg. OurPort). We stop the spooler service and then start it too to refresh the list of ports.
Then we create the printer by running this command from within installer.
rundll32 printui.dll,PrintUIEntry /if /b "Our Printer Name" /f "Path of the inf file" /r "OurPort" /m "Printer driver name" /Z
Once all this is done, we try printing any document to this printer we created and it does print in our application. But this happens only when the logged on user is either admin or a power user.
When we try to login with a local user, and he tries to print a document to our application via our printer, it fails. We can see the document in the printing queue but it shows error-printing.
I seem to have deleted all my preferences from windows. I was trying to get rid of a virus, maybe this is the virus. When I booted up today I was welcomed by a default wall paper no icons except recycle bin. No files on the desktop, no saved emails, no browser preferences, actually no preference for any program they're all gone. If any thing where did all the files from my desk top go?
View 5 Replies View RelatedOn my Dell Desktop, I reformatted and reinstalled Windows XP SP2 4 months ago. Today, I tried to adjust the Paging File size but could not. The machine will go through the motions of allowing a change then call for the required reboot when I changed the file size, but after reboot, the old file size is unchanged. I cannot change it to having the system manage the file, nor can I change the custom file size.
View 6 Replies View RelatedI have this week bought an Epson C86 printer which I now discover WILL NOT TAKE COMPATIBLE CARTRIDGES.I therefore disconnected it and plugged in my old faithful Epson 880. When I open any document, select the 880 printer and click "Print", nothing happens.I did not uninstall the 880 driver before installing the new C86 printer so why wont it work?
View 5 Replies View RelatedI want to connect Deskjet 340 printer to my laptop.The problem is that the 340 is a parallel printer and the laptop only has USB ports.When I use a parallel to USB printer cord, the laptop won't recognize the connection. It wants to use LPT1, so it can't find the printer.
View 10 Replies View Related