All USB ports wont recognise any devices although tried my MP3 player and power is getting to it. Checked Bios everything that matters seems to be enbled. Did clean re-install from restore disk XP1, upgraded to XP SP2 still same problem. (This needed doing anyway and USB problem existed before re-install) Device manager showing no problems.
View 10 RepliesIn the past few weeks my firewire port at the front of my PC is not recognising devices; external drives & camcorder.I've an Audigy 2 ZS with firewire port also, and it's not recognising devices also. Although I've never tried the Audigy before.Is there a possibility it's a software issue? (since both firewire's are inoperative) My USB 2 slots are all working fine.I might buy a PCI firewire card tomorrow and try that, But I appreciate if anyone has any ideas...
View 7 Replies View RelatedI have lost my sound. The sounds icon in control panel say " no audio devices" AND the sound tab shows all listed devices as working porperly. I have deleted an sound object that allows it in device manager and allowed XP to load wht it will. I still have no sound. I checked for sound services in services and they are started as well.If I load Knoppix and test, my sounds work so I am assumming it is not a hardware problem.
View 12 Replies View RelatedI have trouble with the sound after reformating the computer and installing a new O.S. but can find a solution similar to mine with XP x 64 bit So I'm in the same boat ,,, Reformate my computer Install Xp x64 and no sound .But I tried already downloading the sound driver for my Motherboard in ASUS run the exe. but no sound still , the Yellow question mark still in the Other Devices / Multimedia Audio Controller, Pls can someone point me in the right direction of what step I'm missing and in wich order of installing, with all this sound drivers options I don't know wich one I need first to install and wich one I dont really need, for sure my sound card , but the other 3 ?
View 11 Replies View RelatedWorking on a Dell Latitude D530 with Microsoft Windows XP Professional, Version 2002, Service Pak 3; Experienced Serious Error and system had to shutdown.On restart; No Bottable Devices, Strike F1. On restart; Laptop very noisey. Probably coming from hard drive.Don't use this computer that often but contains critical information.Has not been physically abused, dropped or liquid spilled on or in it.It just crashed.
View 2 Replies View RelatedMy WMP (v11) has strated toc crash whenever I plug a memory stick or my MP3 player.I have loaded a Hotfix that's supposed to address this problem but it's still there.
View 6 Replies View Relatedeverytime i boot up my puter i get this window showing that message and i h8 it cuz obviously somethings wrong n i have no clue n its DAAAMMNN slow... any help on how that happened n how 2 fix it?
View 14 Replies View RelatedI have Windows XP Media Center installed on my computer. How do I shut off all the sound devices on my computer so that when I get an error screen or start up my computer or whatever, I don't get any sound at all?
View 2 Replies View RelatedOn a users laptop (IBM Thinkpad) the playback button under Sounds and Audio Devices - sounds - program events is greyed out. They are able to hear sounds. I can play a sound file in Media Player,but no sound otherwise. Also, in Shockwave (I know, not a Microsoft product, but I am just listing this as a troubleshooting issue), they don't hear any sound when playing a.swf file.
View 3 Replies View RelatedWhen I open my device manager on my dell computer I do not see any devices.
View 2 Replies View RelatedIm having a problem with the USB error bubble popping up constantly.. Sometimes i will get an hour or two without the bubble coming up.. but usually it pops up bout every 2-5 seconds.. As you could probably guess this is interferring with how my computer is operating.. It freezes up alot but it will resume after the freeze.If i restart sometimes that will help a little by cutting down how many times the bubble comes up.. I dont have anything plugged into the USBs But i do have a modem connected by ethernet.The error bubbles say USB device unrecognized after clicking on it it shows one unknown device. I have tried powering down and shutting off the power strip. And unistalling all devices and rebooting.
View 14 Replies View RelatedI was using it and I found out that the microphone on it was taking over default,so like an idiot i went in to Device manager and disabled the web camera mic driver.Because of this my windows xp will give me the blue screen of death and reboot when ever i plug it in.Including even if I plug it in before windows starts. All i want to know is, is there a way to see devices installed on the computer while it is not plugged in to the usb port to uninstall the driver.
View 7 Replies View RelatedI have an intermittent problem with XP not recognising USB devices. Knowledge Base Article 892050 says a HotFix is available. However, when I try to obtain it, I am told this will cost me £35
View 2 Replies View RelatedI have an old Compaq Presario 5360 with Sis 7001 PCI to USB controller. This machine was working GOOD, I could work with my USB web cam, USB drive, USB digicam and others MP3 players.I have reinstalled my WinXP with Service Pack 2.0 and now I CAN'T use any USB device, when I connect my USB drive this device is not powered, XP doesn't notify me for anything. simply this PC looks not to have any USB controller.I have an DELL Notebook, I can use my USB devices on it.I just reinstalled the OS in the same way how I did it before. I think is something about drivers, the control panel (System devices) tells me everything is good and my USB controllers are working correctly.
View 12 Replies View RelatedThe computer I am working with is a Dell P4 desktop with 512 MB RAM, and Windows XP Home with SP2 that was purchased new in August 2005.The problem is that every time I plug a device into the system (MP4 player, USB printer, flash drive) it is not detected. If I look in Device Manager it shows up as an unknown device. If I then try to manually install the driver, it will install properly.I then decided to remove all USB Host Controllers, USB Root Hubs etc. After doing this and rebooting, all of these devices were unknown devices as well. Simply telling Windows to update the driver added the devices properly. Can anyone tell me if you have seen this before and if so, what the solution is?
View 6 Replies View RelatedI've been trying to figure this problem out for a while.After a little break, im back on the search for the solution.I've noticed that a lot of people have had the same or similar issue, but the solutions that i've found havn't helped me out.I had an M-audio firewire 410 audio interface, and one day i stupidly unplugged it without first turning off my computer. Ever since that happened, my sound has stopped working, all options in "sounds and audio devices" are greyed out with 'no audio device' showing up. I've uninstalled all m-audio drivers including the hidden ones. I've uninstalled all of my motherboard audio drivers and re-installed them. I've reformatted my whole computer out of desperation and then re-installed the motherboards audio drivers. Still I have the same issue. When i click on the installed audio drivers, it says they are working properly.Is this a hardware issue? do i need a new motherboard?
View 7 Replies View Relatedhis roomate completey ruined the OS it wouldnt even boot to windows, It had a missing NTDLR, using a windows bootdisk I was able to reformat it and reload windows. Here is the odd part, the NTDLR.com and the NTDLR files are all in the root directory, andit still doesnt boot to windows without the startup disk, when I boot it up it says non bootable disk or non system disk then trys the CD roms then the floppy, yet i put the floppy disk in there and it magically works, and the files on the boot disk are the same as the files in the HD's root directory. So now I'm thinking something is wrong with the HardDrive not the NTDLR. I plugged another Hard Drive I had lying around with windows on it and made it the slave drive, and it worked fine, i could select both versions of windows(each 1 installation per disc) and the would both load, so Is there something before the NTDLR.
View 14 Replies View RelatedI'd like to clean the list out for several different external devices but can't find the right key to edit.
View 8 Replies View RelatedAny WIN XP help pages? I have used win 98 for years, and now have win xp and can't install my printer or anything.
View 6 Replies View RelatedWhen I tried to boot it up it stalls just before loading up Windows XP Media Center. I have tried to boot from an external back-up drive, a memory stick with a bootable DOS program called "Spinrite" as well as from the system recovery DVD but it stalls at the same point. I made the appropriate changes to the boot order in the BIOS but that does not seem to results
View 6 Replies View RelatedI have read a response to an question already posted that Bluetooth devices does not appear in the control panel until a device has been to the machine.
View 3 Replies View RelatedI have XP and when I open my device manager, no devices are shown at all. This is not corrected by the usual microsoft help (i.e set services plug/play to automatic).
View 1 Replies View RelatedIt gets to "Installing Devices" then goes to BSOD with: IRQL_NOT_LESS_OR_EQUAL STOP 0x0000000A (0x00000010, 0x00000002, 0x00000000, 0x8051AA58) I've swapped out the video card and tweaked every setting I can find in BIOS to no avail. There are no BIOS settings for cache or shadowing. Does anyone have any thought as to why XP won't load but 7 will?
View 10 Replies View RelatedI have about8 exclaimation points under other devices in computer management while tring to instal win 2000 server. They are ethernet controller,3 pci device, pci serial port, usb controller, unknown device, video controller(vga compapible). i am trying to install this on a intel pentium 4 cpu at compatible
View 14 Replies View RelatedI am running a WinXP SP2 machine, with a Sound Blaster Audigy 2 ZS.One day, during a Windows session, my sound just stopped working. I tried to play a song in Winamp, and got the message: "Device not found. Please select another device in configuration. Error code: 88780078." The window title was "DirectSound output v2.2.12 error".Trying to play a song in Windows Media Player yielded a simlar result: "Windows Media Player cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program, or it might not be functioning properly."
View 8 Replies View Relatedmy friend give me his Gateway 610XL all in one PC to fix a few problems. one of them was internet explorer not showing up when called for, that was an easy fix; however, this next problem has to do with USB devices and it's giving me a bit of trouble. basically, any USB devices i connect to it, windows doesn't auto install or even try to auto install the drivers. no matter what i connect to it (mouse, keyboard, thumb drive). i can go into device manager and install the drivers manually just fine but i would like to fix the auto install feature for my friend cuz he's not that good with computers. i checked and made sure the following services are enabled:
plug and play
upnp
user mode driver framework
shell hardware detection
the problem persist even in safe mode. one thing i noticed is when i go to control panel and then hit add hardware, i get a message that says this: "you can only install one device at a time. when the other device installation is complete, try this wizard again" (some where along those lines). i get that message even with nothing connected to the USB ports. i'm guessing what ever this "other device" is, it hanging up pnp so how do i go about aborting that installation? i don't really see anything in the task bar that even suggest a driver installation is on the way. this is running Windows XP Media Center Edition SP3 by that way.
Is there any device that I could download that could help me find my drivers for hardware in devices manager, I would also like to copy these drivers to a folder for future installations.
View 2 Replies View RelatedI am not seeing the devices in my device manager window.....ever since I did the upgrade to svce pck 3, nothing is shown in the device manager window.....any sugesstions on how to correct this?
View 2 Replies View RelatedMy system crashed and i had to reinstall windows xp, now i have no audio devices and my USB ports are not working. How can i mix it?
View 2 Replies View RelatedRunning HP Compaq Presario..Windows XP Home edition.Thursday I went to plug in digital Camera via cord to USB Prot#2. Message said device malfunctioned.
Tried again. No change (I have used same port, same device many times before ...no problem)decided to Uplug my HP Printer, and try Dig Camera in USB Port #1.. Same Problem... NEXT was big surprise, decided camera may be damaged so went to re-attach HP Printer and NOW IT says Printer has malfunctioned.. same message..
later tried Flash Memory Stick.
My system just shuts down while trying to install xp home (sp1 ver). And I am forced to shut down during the install. The install will get to the installing devices graphical user interface and quit at the 34 minute mark.Then upon reboot it will check the disk and other parameters and they check out ok, so... hence xp will resume the setup automatically and the process just repeats itself over and over and stall out at the 34 minute mark. Is there a reason for this?
View 4 Replies View Related