USB Ports Just Stopped Recognizing Devices
Mar 20, 2010
Running HP Compaq Presario..Windows XP Home edition.Thursday I went to plug in digital Camera via cord to USB Prot#2. Message said device malfunctioned.
Tried again. No change (I have used same port, same device many times before ...no problem)decided to Uplug my HP Printer, and try Dig Camera in USB Port #1.. Same Problem... NEXT was big surprise, decided camera may be damaged so went to re-attach HP Printer and NOW IT says Printer has malfunctioned.. same message..
later tried Flash Memory Stick.
View 7 Replies
ADVERTISEMENT
May 6, 2006
I plugged in a digital camera to my Toshiba laptop, but it won't recognize the camera, it also did this with my palm pilot too.
View 7 Replies
View Related
Aug 27, 2005
I have an intermittent problem with XP not recognising USB devices. Knowledge Base Article 892050 says a HotFix is available. However, when I try to obtain it, I am told this will cost me £35
View 2 Replies
View Related
Sep 2, 2010
My office has a group of XP machines which have been working just fine. They started changing to wireless mice with a USB connection, and now the pcs aren't recognizing USB storage devices any longer. They worked for a few days, then started acting stupid. They first wouldn't just install--needed admin authority. Then didn't recognize the device. Now they don't do anything. Since the problem started after the USB mice were installed, I am thinking there is a connection but am not sure. What do you do when the pc won't acknowledge your thumb or portable hard drive with all your data and files? We don't have a network where we store individual's data. The portable hard drive that they said "was not recognizable" works just fine with my pc at home, so I know the hard drive didn't die yet.
View 7 Replies
View Related
Jan 18, 2006
My system crashed and i had to reinstall windows xp, now i have no audio devices and my USB ports are not working. How can i mix it?
View 2 Replies
View Related
Aug 22, 2005
I have an LG DVD-ROM Model DRD8160B that has stopped recognizing DVD movies.The DVD won't even show up in Explorer; it just says "Please insert disk."
The drive plays a music CD all right and recognizes a CD-ROM with files on it.
View 2 Replies
View Related
Feb 28, 2006
My DSL is connected but my computer stops recognizing it whenever it feels like it. There are no errors and nothing happens to indicate that it just stopped recognizing it, but when I click a link or Internet Explorer it gives me the "Can not connect to this page" or send me to my ISP's modem page, which shows that I'm connected. I've been on the phone with Bellsouth and they say that it's not them. I've also still had this problem even though I disconnected all Firewall and Norton Internet Security for a few days.
View 7 Replies
View Related
Aug 5, 2010
I have lost access to all the USB ports on a PC. There was no apparent crash but I realised there was a problem when the USB Mouse stopped working. Everything else is working OK. I get an Error 39 (drivers corrupted or missing) and the 2 entries in Device Manager both have yellow marks against them. I only have "Standard Enhanced PCI to USB Host Controller" and "Standard OpenHCD USB Host Controller" entries below the entry for Universal Serial Bus Controllers - no Root Hubs are there and there are no Unknown Devices anywhere else.I was running XP Pro SP2 when the ports went, but have installed SP3 and Updated to see if that did anything - it didn't. I have tried the troubleshooting suggestions on Microsoft such as deinstalling and rebooting, updating, system restore and have done a repair installation using my original XP SP2 disc all with no result.
View 9 Replies
View Related
Feb 10, 2007
My CPU has been 100% for over a month. I first thought it was a virus so a scanned w/ every program out there and nothing would detect anything, HJT log was reviewed and nothing found so I went down the Registry Path and tried to repair with Registry Repair Tools to no avail. So I backed up all my files and did a complete OS re-install in CPU is still at 100%. And when this problem first started by USB ports stopped working.
View 6 Replies
View Related
Apr 13, 2009
I am using windows xp sp2 professional.few days back my usb ports stopped working suddenly.They don't recognize any usb devices.Also there is nothing like usb controller or usb ehci in the device manager.I don't have anyway to know what has happened.The motherboard is intel 845 gvsr.If you have any links for updating the usb driver or the bios or any solution to this
View 2 Replies
View Related
Jul 11, 2005
I've got a bit of a problem with my computer and was hoping some advice. Basically all the USB 2.0 ports on my computer have recently stopped working - I can still use them to charge my iPod, but not to communicate with it (I no longer get the little icon in the bottom right hand side of the screen when it's connected), and I can't use my printer because the computer insists it's off-line (I've tried two different cables so it can't be a problem with that).I've got two USB 2.0 ports on the back of my computer (built into my motherboard - can't remember the exact model offhand but the processor is one of those 2800+ Athlon 64bit ones, if that?s relevant) and I've also recently upgraded my monitor to a dell FPW2005, so I've now got another couple (not working) on the side of that too. I even tried taking the USB 2.0 card from my old computer (that has 4 USB 2.0 sockets in it and plugs directly into the motherboard) - but this didn't work either
View 3 Replies
View Related
Jan 1, 2006
I have a Sony VGN-T1XP Vaio laptop with an Intel Pentium M Processor running XP Pro SP2. For some reason the two USB ports have stopped working and no USB devices are recognised. I have looked at the device manager under USB controllers and there are four USB controllers listed which are as follows: Intel 82801DB/DBM USB 2.0 enhanced host controller 24CDIntel 82801DB/DBM USB universal host controller 24C2Intel 82801DB/DBM USB universal host controller 24C4Intel 82801DB/DBM USB universal host controller 24C7 Underneath those are four USB root hubs.
I have previously used a USB card reader and external hard drive on both ports without any problems but now when I connect any device nothing at all happens.
View 28 Replies
View Related
May 6, 2006
I have lost my sound. The sounds icon in control panel say " no audio devices" AND the sound tab shows all listed devices as working porperly. I have deleted an sound object that allows it in device manager and allowed XP to load wht it will. I still have no sound. I checked for sound services in services and they are started as well.If I load Knoppix and test, my sounds work so I am assumming it is not a hardware problem.
View 12 Replies
View Related
Jul 19, 2005
Last week I was hit with a multitude of viruses. Since then I've followed
the KRC Anti-Spyware tutorial, I have ewido, spybot (tea timer running), Ad-Aware, etc. and cleaned everythign up, and my system is finally stable again. I even got Norton System works and that helped a lot too. I've been to Windows update and am completely up to date with installs.2 problems still: I still have no audio, and 5 of my USB ports are not working
View 1 Replies
View Related
Feb 5, 2008
I recently added 2GB of RAM to the 2GB I already had installed. My system is showing the RAM as being there in my BIOS, but, when I run DXDIAG only 1GB is showing out of the 4GB I have installed . Is it because of the Windows version I am running and if so, what can be done?
View 3 Replies
View Related
Jul 31, 2006
I have Windows XP Pro installed with all the updates. I have an Asus P5ND2-SLI Delux motherboard (it takes DDR2 533 and 667 memory). I had 2GB of DDR2 533 memory; I removed those and installed 4GB of DDR2 667 RAM (Kingston KHX5400D2K2/2G). When Windows XP runs, it shows 2.25GB of RAM only!! The BIOS sees 4GB of RAM and I ran Asus PC Probe and it sees all four 1GB modules (a total of 4GB) ... what shall I do to get XP to see the 4GB of RAM? Shall I reinstall?
View 33 Replies
View Related
Jul 27, 2010
My DVD drive was working fine and I was burning discs. Now for some reason I get error Disc is not writable insert a writable disc. I tried 5 different blank discs and got the same answer. So I ran Microsoft Fix it and got the message that this drive is not writable. The drive is a dvd burner but Windows XP is only seeing it as a CD drive.
View 1 Replies
View Related
Jan 14, 2006
I'm trying to o/c my Opteron 148 and after numerous failed reboots at higher fsb this is what I get. Wan'ts me to logon and reenter my password. Only now it's not recognizing my password. Tried safemode for administrator and same thing, my password is not working. I hate reinstalling is that what I'll have to do again?
View 2 Replies
View Related
Apr 21, 2005
I have a Samsung SATA hard drive, a Sony CRX225 CD-RW and a Plextor PX-708A DVD-RW. I hadn't used the burners for a while, now they aren't working (can read from them but most of the time won't write). In the device managerdriveproperties, Win XP sees them all as SCSI devices. How is this possible? The BIOS has them as IDE primary and secondary drives, so where does the SCSI come in? Could this be part of the burning problem I am having?
View 3 Replies
View Related
Feb 16, 2006
I recently turned off a lot of XP services that I thought I didn't need so that I could free up some CPU cycles for my flight simulators. Now, when I try to burn files to a CD, I get a message telling me to insert a CD-R into the drive? I'm using the program built into Win XP and it seems to start normally, it's just not recognizing the CD-R. Strange, but the CD burner was recording fine until I turned off the services. It plays fine otherwise. I've tried turning services back on but no luck. Does anyone know which service may enable this function?
View 4 Replies
View Related
Nov 17, 2007
I'm having some problems with installing certain programs on my computer, like Windows Live messenger and Windows Blinds. For some reason they're not recognizing the Operating System as Windows XP. Since the newest versions of the programs only run on XP or higher. This is strange because i know for a fact that I have XP Home SP2, I've had it for like 4 years or so.
Now, it's strange that this is happening because I had Windows Live messenger before, I wanted to try it out and I didn't like it so I downgraded back to MSN messenger, but now all of my friends are using Live and some things just aren't compatible with both like the Video convo thing. I tried reinstalling it but it says that I require to have Wind XP or Later, same thing happened with Windows Blinds 6.0. I tried installing Win Blinds 5.0 or something like that and it worked perfectly fine, because it's compatible with lower versions of Windows such as 2000, NT and ME.
View 9 Replies
View Related
Jul 25, 2008
My Dell Dimension desktop is running Win XP Media. A few days ago the mouse simply stopped working and on a reboot it did not fix it. I was using a wireless keyboard and mouse and noticed the light was not coming on on the receiver/transmitter so thought that perhaps that might be the problem. At the time I did not have another keyboard with a usb plug, my childs pc had a ps2 keyboard and i do not have a ps2 port. So I used my childs pc and my wireless keyboard and mouse work perfectly on it, including my transmitter/receiver.
The problem is obviously not with the hardware since they do work on her pc. I did however purchase a new keyboard and mouse - usb this time. I get the same issue. The keyboard works fine as I am able to boot in safe mode, enter the set up etc and can move around in those screens. As soon as it hits the XP log in screen though I am screwed, the keyboard is useless and with no mouse I am unable to click on my user name to log in...............
View 1 Replies
View Related
Jul 25, 2010
my mother discovered the internet 1 year ago and now she's addicted to it and is going crazy without it! My sister unplugged her Dell PC, to move it, and for some reason the computer now isn't reading the Westell Modem for the internet. Called the ATT ISP and we figured out it wasn't the ethernet cable, instead, its the PC which just isnt reading the ethernet to get on the internet. When I did IPCONFIG the IP Address doesn't show up. This is basically what it says: c:Documents and SettingsDiana Cresswell>ipconfig.........
View 14 Replies
View Related
Nov 11, 2006
what i delete in the registry or some where else but the problems is that the CMD in Xp dont recognize the command net( net start, net stop etc.)stem-restore?
View 9 Replies
View Related
Aug 24, 2007
I just put an old win2k hd back in my computer and the DVD-R and CD-R/W drives are recognized as CD-R's (i.e., when I click on My Computer, I see two cd drives). These are a couple of el-cheapo drives I got from CompUSA which actually work really well. I can't find the driver disks which came with the drives so I don't know what to do.
View 6 Replies
View Related
Jun 11, 2010
I formated and reinstalled Windows XP home edition on my Dell Demension V400. Now the system does not recognize the cd/dvd drive. Worked before. What am I missing?
View 5 Replies
View Related
Mar 22, 2009
my dad's Dell Dimension E310 is not recognizing blank CDs! I tried rebooting a few times (my girlfriend's computer had a similar problem, and that fixed it on her computer), but that isn't doing anything. The warranty for this computer expired 2 days ago, so I can't get help from Dell unless I pay them... does anyone know what to do?
View 1 Replies
View Related
Jul 19, 2005
I want to back up my data (mostly files and my Outlook pst file) onto a blank CD. But whenver I insert the CD into the drive, it whirs and then stops. And a window pops up (whether I am doing this from the Control Panel or from Windows Explorer), saying "Please insert a disk into drive D" (which I have already done!)This is only happening with a blank CD.
View 4 Replies
View Related
Dec 13, 2006
I've installed two new disc drives, both Sony DRU 820A into my tower. XP doesn't recognize them.
View 12 Replies
View Related
Jan 12, 2006
Just recently I haven't gotten my computer to recognize any of the CD's I am putting into either drive (a DVD R/RW drive or my CD-RW drive). Not only does nothing happen when I put in any CD (I have tried many), but also when I open up My Computer I don't see any drives listed under "Devices with Removable Storage" besides my 3 1/2 Floppy (A drive. What can I do to make my drives work again? I did build my computer, but everything has been working smoothly until this.
View 1 Replies
View Related
Dec 13, 2004
Over the weekend while doing some electrical work, I shut off the power to the room containing my computer. I had a hard time getting it to Start Up, but all seemed fine accept I had to re-set the clock. Then I shortly discovered that it would not recognize either D: or E: drive, I finally did get them both to recognize an audio cd but only after opening them through WMP. Usually they start when placed in the drive, and it will use my default player (Nero). When I looked in "My Computer" it prompts me to insert a disk ?? I am running Windows 2000 NT Pro and the C: drive seems to be operating fine.
View 14 Replies
View Related
