Turned on my computer last night it said:Windows could not start because the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYSTEM. You can attempt to repair this file bystarting Windos setup using the original setup CD-Rom. Select 'r' at the first screen to start repair. Hoever I don't have the original disk, because it came pre-installed. It is an Acer, using Windos XP Home Edition.
View 14 RepliesI recently had a bad hard drive (It need the windows xp cd to boot) and saw that the problem was bad blocks. I decide to buy a new hard drive and use ghost to clone it. But, now i have the same problem with the new hard drive. After a while, i realize that obviously, if the disk was cloned, ONLY the information that can be copied was transfered to the other one.In conclusion, how can I resolve this issue without using system repair. the problem is that once i use this tool and then IE won't work. at last I had to format the drive.
View 2 Replies View RelatedThis computer is roughly 4 years old. I've had a new mainframe installed, new hard drive and recently had a guy come over with a windows xp disc to repair some windows file..Ever since then the computer has been running slow. When I click My Computer, it takes a few minutes just to load it up. When running WMP the computer slows down dramatically, especially in full screen. This was not an issue before this repair was done. Also, under my documents and settings there is 'all users', 'default user', 'owner' and 'Owner.OWNER-C96F31C52.000'.
View 7 Replies View RelatedFirst time poster; having an issue with a Windows XP repair installation. More specifically, during the repair installation process I am presented with this error message:"Files Needed The file 'asms' on Windows XP Professional Service Pack 2 CD is needed. Type the path where the file is located, and then click OK. Copy files from: D: . . . " Note that the Windows XP DVD includes Service Pack 2. Also note that when the error message presents, the CD-ROM essentially goes dead.
View 2 Replies View RelatedI want to know how to repair windows installation without losing ANY files.
View 5 Replies View RelatedI'm trying to repair XP after a virus problem but I keep getting the message:
abp480n5.sys is corrupt unable to continueCan I get the file from anywhere? What else can I do? Can I repair XP another way?
My Toshiba notebook won't boot. I have tried starting in last known good configuration and safe mode but I keep getting the same error. The OEM toshiba recovery CD won't let me do a sytem repair. The computer had been working fine and when I restarted it, it came back with this error. Please help I don't want to have to do a complete reinstall and wipe out my data
View 2 Replies View Relatedrunning XP setup from CD to try to do a repair results in "no installed drives found." when placed in another system as a slave, its found as quickly as the master HD is when its alone, and seems to function normally - chkdsk & surface scan find no errors & kaspersky finds no MBR or other problems. i even used TestDisk to rewrite the partition table and MBR to no avail. i'm able to copy off all my files, but would like to know if there are other things i can try. is there a way to XP setup repair / replace boot files on a drive other than C:? or can i use anything from a working system to fix the slave drive? can i ghost the partition and put it on a new HD and run repair there or will the boot problems be copied with the image?
View 9 Replies View RelatedI read somewhere here how to fix the fact that my system restore does not work, nothing happens if I click on a previous date. I don't know how long this has been going on because I don't think I have used it for a long time. I have Mcafee. I saw a thread here whoch I can't find again because it was a single thread from a Google search. After following instructions I noticed the date was 2004 and it was for Windows ME. It said something about going to windows explorer and finding a certain file "system" which isn't in XP.
View 5 Replies View RelatedWhen I get to the page after starting my computer by tapping the F8 key my computer goes to the webage where the page is covered with sentences. I wait and wait for it to go to the page where I can go to the webpage where I can use my arrow key to go up to my "safe Mode" and hit enter. For some reason my computer stops at the full pages of sentences. Once I would get into safe mode and proceed to System Restore my system would let me go back to a date when my computer was working properly.By the way if I use the regular method of Systyem Restore it goes through the process and at the end I get a message your computer cannot be restored to an ealier date, try another date.
View 6 Replies View RelatedHow I do a system repair?
View 18 Replies View RelatedI have just installed some anti virus software and during installation I got messages saying my registry had been damaged and i should log onto such-and-such site to download repair software and run it on my system. I am suspicious that if I do this I am exposing myself to total destruction. One of the messages has just popped up again and the site it directs me to is FixReg32.com.
View 2 Replies View RelatedProblems started was when i updated my Zone Alarm firewall, windows works absolutely fine no problems what so ever, then next time i reboot it does the same, this time problems are non-stop until about 10% then fine from there on in, then when it finishes repairing the drive it gets stuck at repairing unreadable security descriptions date stream.
It also said whilst recovering orphaned files insufficient disk space to recover lost files. It stopped for a while then carried on. After scan disk it restarted and wouldn't load windows, just got stuck on windows loading screen forever, eventually 15+ minutes i pressed reset as there was no disk activity.
Spybot Search and Destroy had finished scanning my computer (Dell Dimension e520 running Windows XP service pack 2). I then clicked on it to fix the problems it found, and started doing something else on Tradestation. A short time later, a message popped up on my screen that I had never seen before. It basically said there was a system fault, that my computer was going to reboot in 60 seconds, and that I should save all my work. The only thing I remember about the message was that it said something about "NT" system fault or error fault or something like that and a timer counted down from 60 seconds. There was no way for me to cancel it. A separate message from Spybot also popped up. I don't recall what it said other than it asking me if I wanted it to start automatically before everything loaded up the next time I started my computer because of something it had found or that had occurred. But I wasn't able to click OK before the time ran out because I was too busy trying to figure out why I was getting these messages and save my work at the same time.
My computer then rebooted. However, while Windows was loading, it stopped and gave an error message stating that a particular file (hal.dll) was missing or corrupt. On my computer I have the hard drive partitioned into two drives, C: and E:. Both have Windows on them, but the E: drive is the main drive. When I reboot my computer, it asks me from which drive I want to start Windows. If I don't choose one, it automatically selects the C: drive, which is the one I always choose anyway. When I got the error message above, I inserted my XP CD, rebooted the computer, and booted Windows from the CD so I could try to repair it. I chose the repair option instead of the clean install option because I wanted to replace what I thought was just one missing or corrupt file. The software went through the process of what looked like a clean install, but I didn't think anything of it because I've used the repair option before and I seemed to recall this being the case and everything working out okay after it was done.
However, when my system rebooted automatically after the "repair" was done, and I chose to boot Windows from the C: drive, Windows loaded up as if it was a brand new install. Everything from my normal start up configuration was gone: all of my icons were gone, none of the programs that normally run on start up were executed, only one monitor of my multimonitor set up my four monitor setup was being displayed, etc. In addition, almost all of my devices were labeled as unknown devices in Device Manager. My cable modem wasn't recognized so I had no Internet connection (I'm writing this from my laptop, which has a wireless connection to the modem). When I looked at my directories, they all appeared to be intact along with the files they contained, except all of the files in the My Documents and My Pictures directories were gone. I suspect all of the files in other directories that are created when Windows is installed are probably gone as well. When I compared the Windows directories of the C: drive where the "repaired" install occurred and the E: drive, with which I had done nothing, I realized that I wasn't missing just one file, but several hundred files across multiple directories in the Windows directory on the E: drive. When I rebooted again and tried to start Windows from the E: drive, I got the same error message while Windows was loading that I got before I "repaired" Windows on the C: drive.
I called Dell tech support, but the person I got said he couldn't help me because Windows XP wasn't installed on the computer when I bought it. He seemed to imply that he knew the solution to my problem, but wasn't willing to help me at all because it was coporate policy, even after I pleaded with him that I was desperate. Oh, he was more than willing to help me if I had a problem with DOS, since that's the OS that came with the computer. After I begged him to help me, he actually had the nerve to snicker while he repeated like a corporate bot that he was very willing to help me with any DOS problems, as if this was a laughing matter. After that, I tried calling Microsoft, but they were closed. Is there any way I can restore my system to the way it was before all this happened? It will take me forever to figure out how to reestablish my Internet connection, reinstall all of my hardware (I didn't even get any "found new hardware" messages when Windows booted after my "repair") and software and then reinstall any upgrades to those. I am in dire straits here.
All of a sudden I am getting this message when trying to start my computer:Windows could not start the following file is missing or corrupt:<windows root>system 32hal.dlPlease re-install a copy of the above file I have tried to reboot the computer by using the CD to repair the damage. I insert the CD and try to start from there. It starts loading files, and then a window comes up with the following options:Windows XP home edition set up. The following list shows the existing partitions and unpartitioned space on this computerTo set up windows XP on the selected item, press ENTERTo create a partition in the unpartitioned space, press c To delete the selected partition,
View 11 Replies View RelatedI have a machine which was returned by a customer. He said "it just stopped working." To make a long story short, I tried doing a system repair from another Windows disc. Everything seemed to be going fine until asked for the product code. I used the code on the label on the machine. It sees it as invalid. Is this because I did a repair with a different copy of Windows? Would I have to do a complete reinstall with the different Windows disc? Can I recover this without wiping out the harddrive?
View 8 Replies View RelatedMy PC was in an endless boot cycle, so I stuck in the XP Pro nd ran a windows repair, everything looked to be going great All programs are installed in my C:Programs folder (some work, the ones that need say a Java plugin will not, games etc will) but they are not in my start menu listings, it looks like it is a fresh install.If I go to my documents nothing is there, but if I go to C:Documents and SettingsAdminMy Documents they are all there. On noticing this, in the same folder there is a user called "Admin.PAL" which is where my My Docs seems to be stored now
View 6 Replies View RelatedI have tried FIXMBR, FIXBOOT and now trying to reinstall using the guide in another thread. I do not get the same R option when I get to the SETUP screen. It looks to me like it will fresh install XP and wipe everything. Originally I was getting missing SYSTEM file and boot stops. I found what I thought was the SYSTEM file and put it into the directory but it still will not boot. I just get another new error.
View 4 Replies View RelatedIs it possible for me to use the system repair tool (the one that comes up when you boot from the Windows XP CD and press R at the menu) to format only a specific partition on a hard drive, or do you always have to erase the whole drive.
View 10 Replies View RelatedI have an HP computer that only has the system recovery disc and not the full xp disc. SP2 came with the install. I have an XP disc just with SP1a can I do a repair install with that and then just install SP2 after?
View 6 Replies View RelatedWhen I start up my laptop, the screen immediatly says Windows could not start because the following file is missing or corrupt: windowssystem32configsystem
You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair.The deal is I dont have the cd. IF someone could tell me how to get an xp cd (without buying) that'd be great.
Acer laptop (TravelMate 4020) that operates using Windows XP. When I started up my computer the other day, I received the following message: "Windows could not start because the following file is missing or corrupt:WindowsSystem32ConfigSystem You can attempt to repair this file by starting Windows setup and using the original setup CD-rom. Select 'r' at first screen to start repair."
View 8 Replies View RelatedCan someone please tell me if I can use a Windows XP Professional disk to repair a Windows XP Home Edition unmountable boot volume? My sister-in-law's Dell Dimension 8400 is getting that error when she starts the PC. She can't locate the disks that came with the PC and I only have an XP Pro disk. I repaired my laptop using recovery console about a year ago but that is XP Pro also.
View 8 Replies View RelatedI'm using Win XP and, using the built in Zip feature,have zipped up 14 files that include one .exe file and one .bas file.When I try to Extract All files it extracts all except these two files.It says that the files have been blocked to protect the computer, then I can click on a link to find out how to unblock the files but the instructions to do so don't make sense.The instructions tell you to save the file, then right click/properties/unblock, but I can't see how you can save a file if it hasn't been unzipped.How can I stop the .exe and .bas files from being blocked
View 6 Replies View RelatedI have a friend who has a pentium 2 350 which is currently running on Windows 98SE...yikes!My friend has been complaining that their computer has been running slow and that pop ups are appearing everywhere. I told them that it sounds like their computer has been hijacked and that I would recommend that they format their computer and start from fresh.I want to format their computer and install a newer windows OS (perhaps windows xp) and install a couple of spyware/antivirus programs.
View 7 Replies View RelatedEverytimes I open any files, I find that all blue word including system & all dll files are blue in color. I try to restore to previous but is still the same. Secondly my DVD-rw sometimes can read & sometimes just read but nothing come out.
View 1 Replies View RelatedBy default, Windows XP keeps a backup of system files in the System Volume Information folder. This can eat up valuable space on your hard drive. If you don't want Windows to back up your system files:1. Open the Control Panel2. Double-click on system3. Click the System Restore tab4. Check "Turn off System Restore on all drives"5. Hit Apply6. You may now delete the System Volume Information folder.Warning! If you turn this off you will not be able to use Windows System Restore to restore your system in case of failure.
View 9 Replies View RelatedHow you can limit or restrict access to a program that runs on the Windows System File level from other user accounts, including other system Admins.
View 4 Replies View RelatedUpon turning on the computer, we have been getting two different messages, not both at the same time. The first one was "can not find file ///cWINDOWS/System32/1KJddh8s.htm/" and the most recent "can not find file ///cWINDOWS/System32/4csuhtu0.html" What do these files do? How do we fix this?
View 2 Replies View Relatedplease can someone send me some files off their winxp os.
View 1 Replies View RelatedI recently bought a new Dell XPS and want to transfer some files from my old computer but don't want everything. One computer (Gateway) uses Windows XP Home and the other (Dell) uses Windows XP Media. Is there a way to do this without having to pay someone?
View 4 Replies View Related