I had to perform an XP recovery because of various problems. My computer is now running fairly good except for a couple of things.1. Whenever I boot the computer I get a Windows Installer box pop up trying to load SFR. It tries to gather data, gets halfway and then disappears. It does this twice before it stops trying. Sometimes it will re-appear while I try to open files. Does the same as above then stops. How can I get rid of this?
View 7 RepliesHi, I am running an old Packard Bell Easynote bought in about 2005, with an AMD processor and Windows XP. The power supply recently broke so I've been using a new one. I think its quite cheap as quite often the power suddenly cuts out, and I have to wiggle it about and then it works again.
The other day I turned on the laptop and it comes up with a black screen with message in white typeface saying that i didn't shut down properly last time, and therefore do I want to start in XP or in Recovery Mode. I go to XP and the following appears
I have just bought a new PC so I could let the kids have the other one in their room. Both PC's are emachines and run XP. I have successfully networked the two with a crossover cable but I thought I'd reboot the old one to clear it from all the stuff I had on it. When I start the PC up with the recovery disk in either the D or E drive it doesn't get recognized and just goes strait to the user page. Any ideas on how I can get round this? I can enter the set up stage by pressing Del but i'm a bit green on this!
View 12 Replies View RelatedI lost my system recovery disc. I also lost all of my games that came with windows...free cell, solitaire, paint..etc. I just want those back. Can I run a system recovery program on windows without a disc
View 1 Replies View RelatedI need to do a System Recovery to restore my system back to its factory settings (I'm using WinXP Home). When I hit F10 upon startup in order to access the system recovery, nothing happens- it boots as it would regularly. I was able to boot up using the CD, and am now in the System Recovery console. Might anyone tell me what I need to do to perform a non-destructive, or even a destrucitve system recovery?
View 1 Replies View RelatedMy machine keeps rebooting, I formatted the hard disk and reinstalled xp pro and still the problem persists. what could cause a problem like this?
View 6 Replies View RelatedHad problems with virus, couldnt update Virus or Malware Protection. I did full shred System Recovery from partition ( HP- A1130N -Windows Media Edition- Version 2002 Service Pack 2. Dowloaded AVG Virus and ran scan, all OK.Went to MS Dowload center and downloaded and installed 87updates to include IE8,started computer, all OK. Then updater said needed to download SVC Pack 3- took a loooooooooooooong time. THEN COMPUTER WOULDNT START- tried the two options it gave me but no go back to same black screen with boot options-- regualar- last working point- safe mode etc. no go.
At this point I did a full System Recovery again and downloaded virus protection again.
I tried to do a System Recovery today on my Sony laptop. Got 41% completed and had a fatal error. Options given were Ignore, Retry or Abort. Attempted a Retry. Got a fatal error message and everything locked up. I ended up shutting down and when I turned the computer on again it said no operating system found. Where did I screw up?
This is a six year old Sony, XP, AMD 1.0Ghz. Everything was working at the time I tried the System Recovery EXCEPT I was constantly getting low space messages for drive C. I have no files on this drive and very little software. It is a 20G hard drive partioned into two 10G partitions.
I'm running Windows XP SP3 with everything up to date as far as I know. I have the complete set of my PC's OEM Disks that I've used once when my OS was completely messed up, had Geeks Rescue out and they couldn't figure out what was wrong, so I know what they are for.What I'm not understanding are the several tools I'm afraid to open listed in my "Start"/"All Programs" I have both "Compaq"/"Compaq Presario PC Tools" with "Compaq Application Recovery"/"Compaq Recovery CD-DVD Creator"/"Compaq Recovery Tools CD"/"Compaq Support Information"/"Compaq System Recovery"/"Remote Assistance"/"Safety and Comfort Guide"
View 6 Replies View Relatedi just performed a complete system recovery. started the computer, installed windows xp sp2 and sp3, went to the microsoft download center to get my updates and also got all my extras like, java, flash player, shockwave and direct x among many other updates. i also scan my computer with secunia just to make sure i had everything installed on my pc. i started noticing that my computer was working kinda slow.
View 4 Replies View RelatedA friend of mine is having a really hard time figuring out why her computer keeps freezing so I said I would ask you knowledgable people here. She hardly ever uses it and has almost no programs on it but just surfing the net or even poking around the desktop will freeze the computer. Nothing to do but reboot Ctrl-alt-del won't even work. She's tried spybot, adaware, hijack this, housecall etc and I checked it out myself. I'm sure there is nothing like that on her computer. So we can rule that out. She's installed a couple of RAM and HD testers all came back fine. She does have a firewire card installed and if she attempts to use it (for transferring movies) it will freeze for sure. This could be lack of RAM even though you only need 64MB (she has 256MB) as per the box requirements. Could the firewire be affecting everything else even when not in use? Could a windows file be missing? A setting somewhere perhaps? Hardware or software conflict?
View 12 Replies View RelatedIt has happened about 8 times. My computer will just . Is there anything I can do to try and figure out why it's doing this? All of my fans are spinning inside of my computer. I am running Windows XP Pro
View 14 Replies View RelatedI had some problems with my C: drive, and a friend who knew a lot about CPU's helped me a bit, here's what he did. He came over with a restore disk from his CPU, (even though we have different cpus) and it had Norton Ghost on it....when it booted up, it acted like a normal boot disk, and asked if I wanted to restore Windows XP, right along with Formatting my disk, we clicked yes and the Ghost program started. Only, it got done with about 16% of the format, the CD itself looked like crap, with a bunch of scratches on it...nothing really serious, but serious enough to stop the format. I tried cleaning it off the best I could, but to no avail. So thinking that the format failed, we could try something else, but the drive C: was already formatted, and when I tried to start it, this is what it said, "NTLDR is missing, press control+alt+delete to reboot.
View 14 Replies View RelatedDaughters PC hangs ever time you boot it up , but if after approx 3 - 5 restarts it is rock solidI suspect it is a motherboard failuer on the memory but not 100% su All so the fact that it is a 1GB ram but Windows only reports 512 seems odd
OS = Windows XP with all updates I have treid memtest86 V3.3 as a boot CD and it did not report any error's at all.Tried various other diag's tools but all so no error's OS has been re-installed but again no joy.
Would like the forum's advice on how to fix this annoyance.Win XP Pro, SP2, fully patched, firewalled, protected, runs great and boots very quickly. Once booted up, should the user leave the machine and log off, that is when the problem shows up. Using the mouse or the spacebar, the logon screen appears, the PW is entered, and then 'blank desktop'. No taskbar, no recycle bin, no keyboard or mouse function. To escape this situation, a reboot, then everything is normal.
View 13 Replies View RelatedOK I don't know where to start. When my system is rebooted I get a BSOD it goes through BIOS nothing is detected and it BSOD's. Now here is the strange part if I unplug it from power and try to boot again it comes up fine but if I try to shut it down BSOD WTF I have tried everything. BIOS has been re-flashed to latest version for my GA-7VAX MOBO and I have reloaded winXP.. I am at a complete loss as to why this is happening. Could it be my MOBO is going bad?
View 11 Replies View RelatedHello All, this is my first time here and I have a big problem. Last weekend, my computer began acting very slow, etc. Not too long after, the computer began to reboot itself about every 20 minutes without warning. It would just suddenly reboot, as if I'd hit the reset button. This obviously made me suspect it was a virus infection, so I restarted in Safe Mode and ran AVG. It gave me results and I hit the "Heal" button, deleting the entries.I assumed this was the end of it, but as soon as I restarted, the 20 minute reboots began to occur again. For the past few days, I've been trying to find out exactly what is wrong, but have been unable to do so. When I restart in normal mode, a message appears that says "System Has Recovered from a Serious Error". I'm hoping that you'll be able to help me out because I REALLY need that computer right now.
View 7 Replies View RelatedI was working on my laptop and suddenly the whole screen turn purple. there is no other color dots or anything. The whole monitor screen turns Purple color. I treid hitting Ctrl+Shift+Esc but nothing works. At last I had to reboot my computer.
View 6 Replies View RelatedWhen I reboot I get a black screen and it asks to to select which operating system etc, when I select windows xp and hit enter it loads ok, how can i get it to boot normally.
View 2 Replies View RelatedI have windows xp sp2 and after the splash screen the system hangs for about 1-2 minuets then reboots, i don't know the problem, i can not log in so i can't fix the problem either, so i need to know if i have to reload xp or if i just have to do something else.
View 5 Replies View RelatedCan someone tell me how to reboot a Win 2000 computer using a scheduled task? I have found posts that suggest using shutdown.exe in the System32 folder, but no such file exists on these computers. I have used shutdown.exe -r -t 00 successfully on our XP computers. There is no Windows folder, instead a WinNt folder.
View 3 Replies View RelatedThis site is great. I was hit by a trojan last night which made its way through my avg anti virus. it was one of those virus busters trojans. i was able to get that bug off my pc but now when i boot up I get the windowssystem.32 egsvr32.exe in the box. i'm illiterate with dos. below is my log file.....
View 14 Replies View RelatedI plug in my USB Epson 915 printer into my computer it pops up saying generic USB device found and then reboots the computer it even does this when you have the USB device plug in from the start. All other USB devices run fine!
View 14 Replies View RelatedI'm not too knowledgeable about the technical side of computing, so please bear with me.I'm running Windows XP Professional (SP2) on an AMD Athlon XP 3200+. My grandson showed me a game called Roller Coaster Tycoon 3, which I fell in love with and subsequently bought for my own computer. As I only had 'on board' graphics, the game obviously wouldn't run, so I bought an Nvidia 6200 graphics card.Following the instructions which came with it, I installed the card successfully. The only thing I couldn't do was disable the 'on board' graphics, but as my computer recognised the new card automatically, I went ahead and installed the driver.The new card didn't need an extra power source, as there was no connector on it. Incidentally, I did find the 'on board' graphics in the System > Properties list, but nothing happens when I click on it, so I assume I can't disable it.
Everything appeared to work well and I got the Roller Coaster game up and running beautifully.Some time later, after I had closed the game and gone on to other things, I needed to restart my computer, so I went through the usual restart sequence.Things went well at first but some way through the Windows XP loading screen, where the little blue bars scroll across, my computer simply switched off, totally! I tried again (obviously from a cold boot this time), but the same thing happened.To cut a long story short, I eventually removed the new card, and restored my system to a safe point, and it's now running perfectly again, although I can't play my game now.I'd be really grateful for any advice you can offer as to what the problem might be, as I want to build some more roller coasters!
Installed some software vinyl audio and did a restart as requested. Pc now boots up but straight after it says welcome it reboots over and over again. Not seen this before and its on a pc that have sensitive info on that the user does not want to lose it. Is there a way to make it boot up so we can get the info off and backed up to a usb hard disc. The PC appears to reboot at the same point exactly again and again.
View 6 Replies View RelatedI'm have a Compaq Presario 2596US notebook running Windows XP.It uses DDR333 pc2700 sodimm. I had a 256mb and a 512mb chip installed, and had 768 total ram. I ordered a 1gb chip (transcend, from newegg), and the laptop won't recognize it.
I've tried running the 512 and the 1gb chip, the 256 and the 1gb chip, and the 1gb chip alone. With either of the smaller chips installed plus the 1gb chip, the system memory is equal to the smaller chip. With just the 1gb chip installed (tried both sockets), the laptop won't boo just spins out on the 'ol black screen of death
Ok I used to have ubuntu and xp partitioned to seperate drives on a single harddrive. I no longer wanted ubuntu so I ran my xp cd, deleted the ubuntu partition, and was left with half my drive(74gb) as unallocated space. So now i needed to figure out how to get that unallocated space back onto the xp partition. I didn't realize that you couldn't add unallocated space back to the xp partition with the xp boot cd. But i now know how to fix that problem. (Partition magic or whatever its called) Now when I turn on my computer without booting from the xp cd, it goes to the setup screen and says "The setup is being restarted". Then the screen goes completely black except for my mouse. Nothing else happens so I have to restart. When I boot with the CD I get the windows setup screen. It gives me 3 options: Set up Windows XP now
Repair Windows XP installation using Recovery Console and Exit setup without installing Windows XP I tried figuring out the recovery console just by using the help command, but no luck there. I did find out that my xp partition still is fine and has everything that it did before. But i just can't get it to start up.
My grandfather has given me his computer to fix. The only problem is, he doesn't want to lose everything, though I think he's going to have to (or already has). He was doing a system restore (unnecessarily, may I add) and switched off the computer because it was taking too long (!). Now, Windows XP Home will not boot. The XP loading screen is displayed, then a blue screen for a split second, then it reboots. Safe mode does the same, and last known good configuration does not go past about 1/6 of the white loading bar at the bottom of the screen.So I thought I'd reinstall XP over the top. The problem is that the partition is now 'unknown', according to the Windows XP Setup, so it would appear the partition data is messed up. Thus, I cannot install XP without formatting.
I just got a hand-me down sony vaio desktop.
My mother isn't tech savvy and had a few errors with it not wanting to boot up. As sony didn't include the windows XP disk (or even a simple recovery disk) she decided to buy a new system outright. So I inherited it.
I tried installing my main HD from my other PC into it, but it wouldn't recognize it at all unless it was as a slave. I hooked the vaio's HD to my PC and took the essential files that were to be saved from it (music, pictures, etc...) and then formatted it.
I have 2 errors which are shutting down my pc several times a day. The only info' I have is that they are events 700 and 7023. After reading your answers to an earlier query on this subject, I tried to disable the reboot due to system failure option but with no success, it just ignored me.
View 1 Replies View RelatedMy friend goes to college and is home for the holidays and asked me if I could find out what is wrong with his laptop.First you turn it on and there is a constant clciking noise but that I don't think is the main problem. when you turn it on it doesnt boot it goes right to a black screen with whitle letters and says this Reboot and select proper boot device or insert boot media in selected boot device and press a key Could I person put in an xp pro system disk and boot with that? He isn't home right now and I don't know if it is xp home or pro but I have a pro disk, it has not got a floppy drive so can't use floppies to boot with, So can I set the BIOS to boot from the cd-rom and try the xp pro disk? and if so what do I do after it boots? or can I click on I think it is F10 when starting and see if I can get to system recovery? and if so what do I do after I get there?
View 7 Replies View Related