I have windows xp sp2 and after the splash screen the system hangs for about 1-2 minuets then reboots, i don't know the problem, i can not log in so i can't fix the problem either, so i need to know if i have to reload xp or if i just have to do something else.
View 5 RepliesWoke up this morning and thought I'd do some work - one problem, computer doesn't work.I turn it on and all is well through POST up until it's time for windows to do it's thing. I get the windows XP (SP2) loader screen with it's lovely blue bar beneath the writing and then after that screen disappears it reboots. Every time I try, even in safe mode, alst known good configuration and indeed on my second windos installation (on a different partiton).
View 12 Replies View RelatedAlright I have a problem. I removed a bunch of spyware from this computer which included Aurora, WinFixer, Surf Side Kick, and many others. What happened was after rebooting into WindowsI was prompted to re-activate Windows even though I hadn't changed out any hardware. I thought this was rather strange. I went ahead and did an overlay of the operating system. Upon doing the overlay I was prompted to activate Windows, so I did. Upon getting into Windows I found out another culprit which was giving me problems, it was a directory within Program Files. I went into safe mode and deleted the directory. After that I restarted Windows and it kept rebooting after the Windows splash screen.
View 1 Replies View RelatedI had to switch my pc off before shutting down properly earlier today. Each time I attempt to boot, I get the message windows did not start properly etc. and I am given a choice of whether to start in safe mode, last known setting that worked, or normally, etc. When attempting to start normally, I get the windows xp splash screen whith the progress bar for a few seconds, then at the point it would normally switch to the blue password prompt, the screen goes black. No error message, no cursor, no nothing. The system just hangs. It does exactly the same when I try 'last known settings that worked'. On trying in safe mode, the list of drivers it is attempting to load comes up, fills the screen, and then just stays like that.
View 9 Replies View RelatedI have a friend's laptop that boots up and goes to the XP splash screen with the dots moving and they just keep going and the laptop does nothing.
View 3 Replies View RelatedI'm working on a Compaq Deskpro EN500 running Windows XP Professional SP2 (with all patches and updates), current antivirus and antispyware, and firewall. The system was working fine, user was online browsing the web when the system froze. The mouse froze, etc. Start button could not be accessed. The user shut down the system with the power button. When he turned it back on, he was greeted with the standard Microsoft 'an error has occured' screen' and given the choices of Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good
Start Windows Normally
When I choose any of these, I can get as far as the Windows XP splash screen and then the system seizes. I can get into the Windows Recovery Console. I have run a CHKDSK /P /R and a FIXBOOT. CHKDSK returns no errors. I'm not sure what to try next short of a rebuild.
i have a dual boot system xp / vista64 all of a sudden my computer takes a long time to boot it stays on the splash screen for about 10 minutes before showing me the boot selection screen what could be the problem?
View 2 Replies View RelatedI was working on my laptop and suddenly the whole screen turn purple. there is no other color dots or anything. The whole monitor screen turns Purple color. I treid hitting Ctrl+Shift+Esc but nothing works. At last I had to reboot my computer.
View 6 Replies View RelatedWhen I reboot I get a black screen and it asks to to select which operating system etc, when I select windows xp and hit enter it loads ok, how can i get it to boot normally.
View 2 Replies View RelatedInstalled some software vinyl audio and did a restart as requested. Pc now boots up but straight after it says welcome it reboots over and over again. Not seen this before and its on a pc that have sensitive info on that the user does not want to lose it. Is there a way to make it boot up so we can get the info off and backed up to a usb hard disc. The PC appears to reboot at the same point exactly again and again.
View 6 Replies View RelatedI tried install Windows XP on to this machine for a dual boot, but unfortunately that doesn't appear like it's working... I used nLite to put the RAID drivers onto the installation CD, and here is the problem I am having:The system says "Press any key to boot from CD doThe system then says "Please wait while checking system configuration" or something to that effect.The screen then turns black, my CD drive no longer shows the read LED, and nothing happens indefinitely.I have been able to install Ubuntu on to this computer, and all works well, but whenever I try to use XP, either the original disk or the one with the drivers put on it, it will not boot. I have looked at my BIOS and no settings are off, they all appear normal to me.
View 12 Replies View RelatedI left my computer on for about 3 hours, when I returned the screen was black with the a message First time this happened INVALID System Disk Replace Disk and then press any key There is or was no 3 1/2 floppy disk in the computer. Every time I hit any key nothing would happen. When I would reboot I would get to the same screen with the same message and nothing would happen. Then I would reboot again and when that screen would come our I would insert a 3 1/2 Floppy into the computer and the computer would start up. So now the only time I can get the computer to start up I must insert a 3 1/2 floppy.
View 1 Replies View RelatedVery similar to the following problem but i do not have a raid, and it seems that this PC has a raid and i don't, plus it was never really determined what the actual solution was.
http://forums.techguy.org/windows-nt...oot-black.html
The basics: XP Professional Boot up screen, right before the windows loading screen, or direct after the F8 Menu if you hit "Start Windows Normally..." it will just lock up, no HDD activity, blank screen. now BSOD, nothing.
All 3 safe mods work fine.
Ran chkdsk /r in recovery.
Ran proper fixboot procedure.
Went into safe mode and checked the event viewer.
The only concerning message i got was: The following boot-start or system-start driver(s) failed to load:
AmdK8
Fips
nod32drv
Formatting really isnt an issue since i can back up anything i need through safe mode. However its just the fact that the Windows gremlin has struck me again and i must defeat it once more.
I highly doubt this is a hardware issue as it is more of a driver/software issue.any help?
i'm having to boot into windows xp. on power up sytem goes through the windows xp splash screen (with progress bar) and then instead of login prompt it goes just into the blue screen with moveable mouse pointer arrow.
issue seems to be similar to:
http://forums.techguy.org/windows-nt...o-startup.html
http://forums.techguy.org/windows-nt...p-problem.html
but recommended solutions didn't help so far.
symptoms just before issue - was not able to run use some system features - utility to turn off the display, utility to bring up battery info - everything was working fine before this
what i've tried:
boot to Last Known Good Configuration - resulting in the same blue screen
boot to Safe Mode / Safe Mode with networking / Safe Mode with comman prompt - resulting in blank (black) screen with "Safe Mode" in the corners and moveable mouse test the hardware (hard drive / memory etc.) via build in PC Doctor - all seems to be working
i am able to use bootable XP CD from other machine to get into Recovery Console
i am able to boot to simple live XP using BartPE-XPE usb key and access the hard drive
I am using a Gateway Tablet PC. XP PRO; 2Gig ram; 80 gig hd; Within the last few days it has fallen apart. I have added nothing new. I boot it on and all seems well. I can run an app, work in it and then close it. Then the mouse freezes or slows to a crawl. I can not open any thing else. I registered several DLL's such as urlmon.dll,etc. because of a Micrsoft fix listed elsewhere but this did not work. All spyware and virus checks have been negative. CTRL-ALT-Del gives me an error that the taskmgr.exe could not be initialized. Now the only way to shut down is to totally power off and if reboot I get the blue screen while the disk is checked and it is always negative
View 1 Replies View RelatedWas working fine this morning but this afternoon - Upon startup everything runs fine until after the windows splash screen everything goes black and the only thing visable is a cursor, but nothing to click, cannot ctrl=alt=del, cannot right click. Cannot enter safe mode at all, last good configuration doesn't work either. Computer is still running, fan whirring, lights flashing. Fan has been cleaned and power supply checked, no change. Cannot get into anything to run explorer or virus check. She is running Windows XP SP3. I'm unsure of when sp3 was installed. I understand this may be an issue, along with video and graphics drivers, display settings, corrupt registry, flat CMOS battery or loose internal connections.
View 3 Replies View RelatedIve done a fair amount of searching online and tried a number of things myself, needless to say, they didnt work.Ok, so here's the issue; When I go to turn on my computer, I make it to the XP splash screen with the 3 blue bubbles moving left to right... But nothing from there.Additionally, between the BIOS screen and the XP splash screen, theres some weird black screen with what looks like a long barcode-esq bar, where a solid white line fills the gaps moving left to right...
View 3 Replies View RelatedHow can i change or remove it?? can i do the same with the shutdown screen?? also does anybody know how to get rid of i.e.s icon?? i use avant browser.
View 2 Replies View RelatedI boot my xp machine but it hangs at the xp splash screen.It's not like it's frozen, the blue bar under the "windows" just scrolls and scrolls and scrolls, etc. The same happens when I try booting to VGA mode.I am able to boot to safe mode, just not completely. I get to a screen that says " Safe mode Microsoft (R) Windows XP (R) (Build 2600.xpsp_sp2_gdr.05001-119: Service Pack 2) Safe Mode.I can also see the mouse moving around, just nothing else. Nothing was added, removed or installed.
View 6 Replies View RelatedThis problem started several days ago. On restart the XP splash screen loads but freezes as the progress bar is in motion. After rebooting several times it does load to the desktop, but on restarting again it hangs.
I have searched reference articles, forums, etc and have found others have the same problem and have narrowed it down to nvidia drivers and hardware conflicts that load after 'mup.sys' in the boot up process.I had installed a nvidia graphics card and driver before this problem began but then uninstalled, deciding to keep the on board sis igp. I have downloaded driver cleaner and removed all traces of the nvidia driver but the problem persists..I am running XP sp2, p4 3ghz, foxconn motherboard, sis 661fx graphics.
My PC has developed a problem and I'm looking a solution. What I'm seeing is that when I boot my PC, it gets to the splash screen and I see the scroller moving but that's it. No color changes no BSOD, etc. At this point, I've been able to restore my system using an Acronis full system recovery but I would like to know what's going on behind the scenes when the progress bar moves but nothing.
View 3 Replies View RelatedI'm getting a BSOD. Everything seems fine--it is at least getting to the boot.ini since I get an OS selection--W2K or the Recovery Console. The W2K splash screen comes up, the blue hash marks scroll about half way across the bottom, halt, then BSOD "INACCESSIBLE_BOOT_DEVICE". I tried the Recovery console, but that BSODs as well. I used ERD to run CHKDSK --- no errors. Possibly the hdd? ERD took a loooong time to read what OSs were on the hdd--five minutes.
View 1 Replies View Relatedi used it all fine about 2 hrs ago and shutted down fine. i just now go 2 boot up and after i get the BEEp, bios screen, it says vereifying dmi pool data for a split ssecond and gives a blak screen for a split and does the Splash. but my issue is, it doesnt give me a splash...it just sits at that blak screen.
View 3 Replies View RelatedWhen im tryin 2 start her up, after the splash scr een l oads, just as it enters the next stage of boot up it flashes a blu screen and reboots. i cant boot under ANY start up options.
View 7 Replies View RelatedI am new here and I consider myself very knowledgeable on a computer but this one has me pulling my hair out. I have seen posts for similar situations but nothing identical to mine. What I have is a Dell E520 and we had a power serge and the computer shutoff. When the computer was turned back on it P.O.S.T. fine, loaded to splash screen and then once that is done loading I get a blank screen. Nothing. I reset go to safe mode, works fine, loads into safe mode. I try to load safe mode with networking, will not work. So I went back to safe mode and tried to do a system restore, told me it was disables and I would have to go back and enable it in regular mode.
View 3 Replies View RelatedI am running windows XP Home edition with SP2. When starting up it stalls at the XP splash screen with the flashing bar below it. I can start in safe mode but haven't had any luck with the system restore.
View 1 Replies View RelatedI have a Dell Dimension 4600. I got a new 80gb hard drive and wanted to clone it with the current 20gb drive. I took both drives and connected them to a different pc that had norton ghost on it. After cloning, which went fine, I placed them back into the Dell with the 80 gig set as master, and the 20gb set as slave. The computer would post normally and boot to a black screen with a blinking cursor, this happned right after verifying dmi data pool. It would hang at this screen never getting to the windows loading screen.
I returned the 20gb to the master drive and set the 80gb as the slave. It booted fine. After getting into windows I saw it was reporting the 80gb as C: and the 20gb as D:. I changed the drive letter of the 80gb (in safe mode) to G:. After changing it the computer would freeze at the XP splash screen, however I still had control of the mouse. I believe this was caused from windows search for the page file on C: which no longer existed............
my PC that the screen goes black at the XP Home splash screen. When I boot into the safe mode I get to the login screen then the screen goes black.
I have removed and replaced the video card and also tried using the VGA mode. Same problem. Any thoughts?
Today, I tried to start up my XP computer; it gets to a splash screen saying that the motherboard is optimised for the Intel-P4 combination (which always pops up after POST and before the system boots up) and it just stopped. Rebooting encounters the same problem.I can't boot from floppy, CD, or DVD drives, and cannot get to the BIOS setup (hitting the appropriate key just gives me a blinking cursor on a black screen with which I can't type).There is obviously something seriously wrong, but it's beyond my very limited skills.
View 8 Replies View RelatedI copied my laptop hard drive with Norton Ghost 14 to a larger HD and installed it onto my Dell Inspiron 9300. It starts with the Windows XP screen with the loading progress bar and gets to the blue screen with Windows XP and just stalls, won't load. I can get it into safe mode but it gets to the same splash screen and stalls again.
View 2 Replies View RelatedI recently had my motherboard changed on my Intel Pentium IV 1.6 GHz PC due to some serious problems.Now, I'm again suffering from problems. Once I boot it, POST is displayed, and the Windows splash screen appears. Very often, the screen goes blank. It seems that everything else is working. If I press Alt+F4 followed by a 'u' (To select the 'turn off' button), I hear the Windoze shut-down sound and the computer shuts down.
View 3 Replies View Related