Paging File Partition
Jan 11, 2005
I'm just wondering whether this is a healthy maneuver, I have 1 hard drive in my computer, I want to install a fresh copy of XP, naturally I want a separate partition for the windows paging file so to avoid fragmentation of it (and no I don't care about lack of stop error message dumps) but I'd also like to maximize the speed of access so I thought I'd put the Paging partition at the front (outer rim) of the disk and the boot partition a gig and a half in (That's before the boot cut off), then just have a storage partition after that. I've already set up a computer this way, it seems okay and runs like a dream. But I have an inkling it actually isn't a good idea, mostly cause I've always just dumped the Boot/System partition at the start of the disk. Is this a really silly thing to do, if so why?
View 7 Replies
ADVERTISEMENT
Mar 14, 2006
To silverduck441: The Paging File is Windows virtual RAM, and generally it is about 1.5 times the total RAM. Go to Contol Panel/System on the Advanced page, go to Perfomance and then Settings. Select "For best performance, do not set the initial size to less than the minimum recommended size under Total paging file size for all drives. The recommended size is equivalent to 1.5 times the amount of RAM on your system. Usually, you should leave the paging file at its recommended size, although you might increase its size if you routinely use programs that require a lot of memory". If you get this problem often, the answer may be to increase the settings in the virtual RAM settings manually and/or buy more RAM
View 8 Replies
View Related
Mar 23, 2005
a pop up window states;system is low on virtual memory, to ensure that windows is properly working increase the size of your memory paging file.
View 11 Replies
View Related
Aug 28, 2007
I've got Windows XP home and two external hard drives (connected via USB) and I'm trying to give one or both of those drives paging files. My hard-drives are an I-Omega 500GB and a Maxtor 300GB, both with plenty of room. I want to set my paging file to 650MB.I know how to change the size of a paging file. I go to System advanced performance...etc to get to the virtual memory box, I set the paging-file sizes for the external drives (remembering to press SET) then reboot. When the computer has restarted I run a disc analysis, but the external drives have no paging file.I notice that many people move their paging file to an external drive, so why isn't it working for me?
View 14 Replies
View Related
Jun 2, 2006
I have started getting na error message about the virtual memory on my laptop being low and needing to increase the paging file. I have increased the size of it but I am still getting it. The laptop is only 3 months old, and the usage has not changed in any way whatsoever, i done a full cleanup a few weeks ago and all was running smooth.It was only appear the last 3 days for some reason and its really really bugging me as the entire laptop slows down and has to be rebooted the whole time.
View 8 Replies
View Related
Sep 20, 2006
i have an upgraded comp from windows 98 2nd edition to windows xp. i frequently get messages telling me my virtual memory paging file size is too low causing progs to disappear. i have tried help&support pages at microsoft but i dont know what size my min or max page file size should be.the ram on my comp is 192mb.
View 9 Replies
View Related
Jan 9, 2007
I am trialing drive encryption (TrueCrypt) and have created an encrypted D drive. I set my paging file to exist on the D drive so it is also encrypted and therefore safe and done the same with the temp directories.The problem is the screen goes all funny at boot time (splits into 4 sqiggly screens) and then comes up. It was unable to create the pagefile as there is not yet a d drive.
You have to use truecrypt to make the d drive by putting in the password, which makes sense since that's what keeps the data safe.The temp directories are used after the d drive becomes available but the pagefile.sys is not created or used that I can tell. This is a problem because either it means I have to keep the pagefile on the unencrypted C drive which is a security risk or I have to do without a pagefile entirely.
View 6 Replies
View Related
Dec 18, 2008
a program called "System Guard 2008" has installed itself. It slowed down quite a bit and eventually crashed on me. Now it wont boot up all the way. I turn it on, it will get all the way to the Windows password screen, then once I enter my password and click on the green arrow, I get a warning message that my paginf file is either non existant or too small. Then once I click "OK" on that warning message, the screen blacks out, restarts the boot process, gets to the password screen, and that cycle just continues over and over. Ive tried to boot into safe mode, safe mode with command prompt, last known good configuration
View 3 Replies
View Related
Apr 21, 2008
I heard that the paging file should always be 1.5x the amount of RAM that is available on the machine. My initial size of the paging file is set to around 2GB and I was wondering if I should change the initial size to 3GB or put it to 'System managed size'?
View 11 Replies
View Related
Jul 15, 2005
I keep getting this message when I try to run a program that I really want to run. I know I can do something to change the memory but I don't even know what mb is and when I look at the paging area there are much larger numbers.
View 2 Replies
View Related
Sep 5, 2005
pagefile.sys is corrupted since it is fixed a 2GB whatever setting (no page file, system managed...). I choose in the virtual memory panel. I can't changed its size and would like to delete it so windows xp (sp2) can recreate a new correct one. the purge at shutdown does not work too and I don't know the password for
the recovery console under the DOS. I am looking for a simple solution to delete this file which is on an ntfs partition.
View 8 Replies
View Related
Aug 16, 2005
How do I make the second partition, which includes all files from another hard drive, pretend that it is the main partition? I want to simulate the second partition being my main one for a while.
OR
How do I resize system partitions?
View 14 Replies
View Related
Nov 16, 2007
I have my Windows format disc and I want to create another partition with it. I tried to create one, but it said something like "You have no more space to create another partition because you used up all your space on your Windows primary partition". See, when I reformatted my computer a while back I just created 1 partition for Windows and applied all the space onto that partition.
If there is a way I could remove some space off of my Windows primary partition and create another partition with the space I removed. I want to do this so I can put general things in my other partition such as documents, music, etc. and just leave the other partition for Windows and programs.
View 1 Replies
View Related
Apr 22, 2007
What are the steps needed to access one of my partitions, delete it, then use 1/2 the space and apply to system drive and the other 1/2 to another partition?
View 5 Replies
View Related
Feb 5, 2008
I bought a new computer.It appears to have been partitioned into a NTFS format and FAT32 format.The default drive for my documents & my pictures etc is the NTFS which I have been using happily. It is Media Centre Edition so I also have a few large files (>4GB) - though I dont keep them long term.NTFS partition has fulled up - but I cant move my large files to other partition to free up space
I've done a little bit of reading but my question is "Should I reformat the FAT32 to make it more of use to me?".I cant really see the need arising to access older OS files, except .JPG's (photo's I had on my old Windows ME Comp) or "Should I move all my smaller files (documents and photo's) to the FAT32 partition and use the NTFS drive for the bigger files?"
View 10 Replies
View Related
Nov 23, 2008
My hard disk arrangement is C(primary partition FAT32)for Windows XP
D(extended logical FAT32) for non-os data (movies, pictures etc..)
F(primary NTFS) for Vista..
I am formatting F: and then C: through XP installation CD
(and C->NTFS from FAT32)
is this ok???
will D: be accessible after installing XP on C???
View 4 Replies
View Related
Dec 31, 2009
I would like to know if it´s possible to take free space from an extended partition and redistribute it to a primary partition using partition magic 8.0..both partitions are NTFS
View 1 Replies
View Related
Jul 7, 2010
Now I am having multiple new problems. I want to completely erase the hard drive and install a new version of XP Home, not Pro. At the beginning of the installation process, it gathers system info. Immediately it responds with "no valid system partition" and the only option is to exit from the process. How can I get past this to complete the installation?
View 14 Replies
View Related
Jul 25, 2005
My existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
View 5 Replies
View Related
Apr 9, 2010
what are the steps to create partition using Paragon Manager?
View 1 Replies
View Related
May 1, 2005
I had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
View 4 Replies
View Related
Aug 17, 2005
i plan to format my computer again and this time i plan to split my primary partition before i format. When i go to format i want to format only the active partition with windows in it.I have two questions. This trick does work right? the partition i created in windows using magic partition 8 won't be formated along with the active partition right? I plan to backup everything on my second partition.When i created the second partition i had two options. to either make it a logical partition or a primary partition. I chose primary partition. would that work?i plan to install windows xp pro sp2.
View 8 Replies
View Related
May 3, 2006
Over a year ago when I setup my new system and before installing most of my APPS, I backed it up to a small HD. My Win Xp Pro MCE 2004 has become a little buggy (MY FAULT).How would I copy or clone the smaller HD over to my 80GB drive AND maintain the larger partitions? I have Ghost 2003 but I'm not sure if it permits me to set the partition size when copying HD's.
View 6 Replies
View Related
Jan 31, 2007
I reinstalled my OS several months ago, and decided that I might want a dual boot in the future. I already had an old, smaller drive in the machine that's labeled the c: drive.
Reading one time that for security purposes it's good to have your OS on a drive other than C:, I decided to not alter the drive lettering.
I then partitioned a new internal hard drive into several logical drives. I formatted the D: partition as a Dos fat32 partition and the rest as NFTS partitions. Somehow, I allowed the D: partition to be the primary partition, while the E: partition which contains the Win 2000 Pro OS Winnt directory is a logical drive.
When I just checked disk management, I noticed that not only is boot.ini on the D: Dos partition, but so is ntldr along with the following Dos setup files:
ndetect.com
arcsetup.exe
arcldr.exe
View 2 Replies
View Related
Feb 3, 2006
I'm running Xp Pro SP2 & I need to redo the system. I have 2 Samsung 80gb hard drives but only one is currently in use.
What would be the best way to set them up for system speed, reliability & ease of back ups?
What sort of partitioning software do people have experience with ?
View 2 Replies
View Related
Feb 29, 2008
To reformat my computer now and i downloaded all the files i'd need to reformat and compressed them into a single rar file to put onto my d drive.
Although when i go to move theses filesonto my d drive i get a message saying: cannot copy "reformatfiles": There is not enough free disk space
Delete one or more files to free disk space, and then try again
Free space on this drive by deleteting old or unnecessary diles click disk cleanup.
View 1 Replies
View Related
Sep 8, 2005
I've just resized a partition on my main physical drive, and the OS sees the adjacent partition as unfromatted.
I'm using Partition magic pro 7 and WinXp pro.
The partition I resized is the primary OS partition which is formatted as NTFS, the adjacent partition is FAT32. How can I get XP to recognise the FAT32 partition again?
View 2 Replies
View Related
Jun 20, 2008
I decided to try Linux. 'Ubuntu' was my type selection. After trying by running off a CD I then decided that I would pick up some partitioning software like 'Partition Magic' or some software along that line to do the partition. But somewhere(s) I read that virtual or software partitions are less then a good idea for reasons I don't recall at the moment.
Is that true? If so, why and/or to what extent?
View 4 Replies
View Related
Jan 5, 2008
Is it possible to recover data from an external HD that I accidently deleted the partition and created a new one I just got a "new" computer - it's actualy a hand-me-down that I was trying to do a clean install of Windows XP on. I booted it up with the XP disk in the CD drive, and thought I was telling it to delete the existing partition and create a new one on the C: drive, but I didn't realize that it was also recognizing the external drive, which was already plugged into a USB port (why I even went ahead and plugged it in I don't know - that was stupid mistake It was the first one listed, and I thought it was telling me that there were two partitions on the internal drive, not two drives I also didn't pay attention to the size it was telling me the drive was (stupid mistake #2), I just told it to create a partition with the maximum possible size
View 4 Replies
View Related
Jan 15, 2010
I am having a partition problem I am having a machine with only one active partition i want to creat one more for the backup purpose
View 1 Replies
View Related
Oct 7, 2009
when I start my ms outlook 2007 I get this error. "Errors have been detected in the file 'file_path'. Quit all mail-enabled applications, and then use the Inbox Repair Tool." I tried to scan with scanpst.exe but it went in vain.I tried it with other applications it worked fine.But,the problem is they all are demo versions and I gets back only 5 to 6 mails for more mails i have to buy that applications. Do we have any free tool that can fix my problem or any other way to fix this.
View 2 Replies
View Related
