I have a problem installing Windows XP on Dell Precision Workstation 610, XP can't detect the hard drive attached to the Adaptec AIC 7890 SCSI controller. I've already tried loading a driver via floppy disk but still no glory.
View 6 RepliesSo I was bored today and began creating a old Pentium 4 System out of old PC parts around the house.Now, I have assembled everything and have tested all the parts and all are working fine, However when I go to install Windows XP on the machine it will not detect the Hard Drive (On the Partition Screen). Now I thought it may be a hard drive problem so I connected the hard drive up to my current PC and ran the XP Installation fine.However, Now when I try to boot the XP I installed on the hard drive off of my other system it will get to the splash screen and restart, so I turned off automatic restart on system failure and I get the 0x0000007B Stop error.
So I retried the XP installation on the system again, got to the Partition and Hard Drive selection screen and still no Hard Drive to be seen, I plugged in a USB and it detected it fine.I have tried booting in safe mode & every option under F8, However it just restarts on the XP splash screen, And as I said the hard drive seems fine as it comes up in bios and my main PC ran it fine, So I'm beginning to think that i'm in need of my motherboards SATA Drivers or something.
I just put my computer on stand by mode for the first time in my life and now every time i start my computer i get this message " Reboot and select proper Boot device or insert boot media in selected boot device and press a key "And in my setup mode theres no hard drive showing is it gone forever?? Everything was working perfect before i put that accidently on standby mode.
View 4 Replies View RelatedI've recently installed windows xp over again and when I did it doesn't read the full hdd. so now I have 124 of the full 232.I'm on SP 2 right now and I believe I'm fully updated. I've already attempted partition magic and one I think it was called gnome drive. Both want me to purchase the products so I'm trying to find the free way out.
View 8 Replies View RelatedI had a 40 gig hard drive : then bought myself an 80 gig to accomodate the huge amount of music I had collected: essentially using the second hard drive merely as a storage space: i.e. it had no windows or other interface installed upon it and was run from harddrive number 1 (40gig) due to long overdue need of formating : I reformatted harddrive 1 and following said format I couldnt read hard drive 2 (with all my beloved music) through windows
after much headscratching I remembered that my original windows was fat 32 win xp pro and this new format job was ntfs win xp homeI havent had a chance to test my hard drive on a fat 32 driven pc yet : and i was posting here in the hope that someone could enlighten me on whether it is worth trying another format job with fat 32 and xp pro or whether there is anyway i can convert the 2nd hard drive to ntfs.
I have a Dell computer where one of the loading .dll files came up 'missing' one day, so it won't boot. I want to get all the photos and other docs off the hard drive. I had downloaded one version of linux and was able to see the files on the internal hard drive, but was unable to copy them to a memory stick or external hard drive. Now I've downloaded ubuntu and booted off a memory stick... this time, it's telling me that the internal hard drive has all kinds of bad sectors and won't let me access any of the files on there.
View 1 Replies View RelatedMy laptop died and I removed the hard drive.i hooked the hard drive up to my new laptop via a SATA/IDE cable.
I can see the old hard drive in the E drive and it appears that all the contents are there by the size of the hard drive (same as when I had it in the old laptop) but I can only see, actually view, a very small percentage of the drive.
My goal: I want to transfer all old music, word documents and photos from old laptop into new laptop.
current HD going bad, have second HD installed and using as back but now i need to make the second HD my primary, can i do this without having to reformat in order to add booting files.
View 2 Replies View Relatedusing XP. am having wild swings in my hard drive space go from 46.1 to 44.1 and sometimes in between. have not installed any new programs recently. what could be causing it and how do i correct also am noticing my laptop as slowed appreciablydo know whether the two problems are correlated
View 3 Replies View Relatedi have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
I had this idea, see if anybody has an opinion about this. My wife has an old XP computer I want to buy her a new one but she doesn't like the vista and she wants to keep the old xp operating system. What I want to do is take the old hard drive and put it in the new computer as the master and take the new hard drive and put it in as the slave erasing the vista off it. Then using the master slave way can I transfer the xp operating system and all her files and data from the old hard drive to the new one.
View 3 Replies View RelatedWe have Windows XP Home Edition 80 GBCan we copy entire hard drive to an external hard drive?
View 36 Replies View RelatedCan anyone tell me whats the difference between a ATA hard drive and a SATA hard drive?
View 2 Replies View RelatedI recently helped someone save the documents off of their computer after it crashed (it was missing a Windows file. I tried the repair command and it wouldn't work, so I decided to save the files and reformat the hard drive).I plugged the hard drive into a working computer and pulled all the documents off of it (VERY slowly) onto an external hard drive.
Every once in awhile I wouldn't be able to pull a picture or document off because of a cyclic redundancy check error. I just moved on and saved what I could. I assumed it was because the hard drive was already bad so I just moved what I could.
I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedI can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
View 1 Replies View RelatedA problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies View RelatedMy XP SP2 is not detecting any new printer attached. Both parallel and USB ports are not being detected. When I connect the printer and reboot, its like nothing at all has happened. The PC sits there finished booting, calm and quiet. They were being detected and installed some time ago. I suspect it might be a window corruption.. or some registry problem. Is there any way to refresh the windows registery so that it will start picking up printers again? Other devices like memory stick, external hard disk etc. are being picked up and working fine with USB
View 1 Replies View RelatedI have had this problem and no one seems to know the answer. I reinstalled windows (before my headset was transmiting my voice perfectly) and when I tested my Mic, it didn't work! I could hear through it but my voice just wouldn't go through. I checked out the recorder on Windows, no sound. I did the check in the audio controls in the control panel, it didnt detect my voice either!I don't know what to do, I even bought a new headset and it still doesnt work, can anyone help me out? I even tried to do detect hardware (even though it should be plug and play, right?) but it wasn't found, help?
View 3 Replies View RelatedI am facing two problems with my lap top hp campac presario 2100.
1.The loptops battery to be changed. I dont know how many batteries are there. Any cmos battery there like any other pc. Pl advice. What would be the cost. and the model number . The hard disk requires replacement. I want to know the model numberor exact type of hard disk would be fit in. and the cost thereof.3. Windows xp home edition has been preloaded in the laptop. How to take a copy of the os and copy in the new hard disk. I have the serial number etc for the OS.
I recently donloaded the trial version of kapersky av since i heard its the best. It detected a bunch of trojans that AVG and CA antivirus never detected. Any ideas wat hese are or where they could have come from? Is this the system restore directory? Are these maybe older viruses still stuck in older system restore folders?? Please help, im a pretty careful web surfer and always have AVG active protection running so i dont understand how thse viruese got through?
View 6 Replies View RelatedI am running XP on a dell D610 laptop (new) When I access the internet by send/recieve in outlook or through explorer. Its taking up to five minutes to access pages or email. I am already connected !! I noticed that as soon as I execute send/recieve the CPU shoots up to 100% and stays there. When the CPU drops it connects. After the initial tedium things work OK until I log off or restart the laptop. I am currently in a remote location and have to use dial up. However the office PC seems to connect without these symptons.
View 11 Replies View Relatedwindows doesnt detect that i have a HD but its on and im using it right now so it beeps so how do i turn it off?
View 1 Replies View RelatedHow do you remove a hidden "StartUp program", like the one shown below? I need to remove it from my system. WinPatrol doesn't even detect it, so I can't remove that hidden program/file with WinPatrol. Is there a program that is made to detect hidden files like this (see below): I believe the program is actually part of the .NET Framework 2.0 (Service pack 1), which was installed on my computer, yesterday. I want to remove it & all of it's components if one of it's components is the exact same file I'm having trouble finding & removing from my list of StartUp programs. Is there a safe program that can detect & remove .NET Frameworks & other "hard to remove" files?
my USB Ports on my laptop are very intermittent. I have my mouse/keyboard wireless combo plugged directly into the P4, WinXP system. I get the combo set detecting and undetecting constantly. I have re-installed
the USB drivers, tried different ports, tested other devices. My device manager is perfect. Is it lack of power to the USB ports?
channges i have made before the problem occurs:
> installed VISTA INSPIRAT2
> system worked for 1 day
> system stopping at the startup process "windows is starting"
> mother board is not deetecting
> but motherboard is working with another PC.
> i cant able to press F2 or F8 bcz M.B is not detecting
> so,i have used PS/2 to USB converter and connected M.B to USB port , M.B detected but not working with my computer,but working with any other computer.
how do you see how much hard drive, C: space you have and how much you have available
View 1 Replies View RelatedWhen installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
View 3 Replies View RelatedI use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
View 14 Replies View RelatedA little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
View 7 Replies View RelatedA friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
View 14 Replies View Related