Some of my childen started playing w/the buttons on the front of my monitor and now the screen is all out of whack, and i can't get it back to looking normal. the words are slanted and some things are off the screen etc. is ther a way to reset it back to it's original looking way?
View 1 RepliesWhen Windows adds a new monitor using the standard driver, can it detect the aspect ratio? When I hooked up mine, all the resolution choice were for 4:3 monitors. There were no widescreen options. It should choose the monitor's native resolution on its own if the monitor is an LCD.
View 2 Replies View Relatedmy darn gateway monitor screen is too wide. How do i reduce it to the regular size? I pressed Ctrl and held down on the scroll lock and nothing happens. i tried to reset it with the monitor button but nothing happens.i can not view the right side graphic on my monitor
View 8 Replies View RelatedI'm usually pretty proficient in handling typical squirreliness with my computer but this one's a tough one for me to wrap my mind around. Here's my computer specs:Just recently I'd been gone to work and my girlfriend was at home on the computer.She usually goes on myspace, xanga, facebook a lot and generally doesn't stray far from those activities. I got home and she pointed out the computer was acting weird. When I hit ctrl+alt+del, the screen just gets a light blue sheen over it until I click and then it's gone with no sign of the task manager. Also in firefox I cannot use the ctrl keys. The left ctrl key when pressed immediately makes the font size in the window larger and larger and after 2 or 3 presses opens a new tab in firefox. The right ctrl key yesterday was opening a new tab going to gmail and today is doing a variety of things including going back a page and copying text to pages. I can't use any ctrl key combinations in any software without it doing something strange. In Azureus it opens a file's statistics.
View 4 Replies View RelatedIt looks like my screen is being squeezed (I know thats Not proper but) its black on both sides. Normally if I tap it on the side it will help. But this time it hasn't.
View 3 Replies View RelatedI got a new computer in August and stopped using this one mentioned - decided I needed it in another room and tried to start it.When I turn it on, nothing on the screen of the monitor - a noise comes from the tower - like a beep or alarm for 2-3 seconds then silent for 1-2 seconds then the beep again - until I turn it off.
View 14 Replies View RelatedDisplay screen is is tilted 90 degrees to the right, so instead of my screen showing horizontally it is displayed vertically. In other words, you have to set the flat monitor screen on its side to view your display. I ran Norton Antivirus and there were 5 items that I couldn't delete including TBPS.exe.
View 2 Replies View RelatedI have a Dell E207WFP Flat Panel monitor on a Dell Dimension E520 computer with TONS of memory and which is about a year and a half old. It has been working absolutely fine until Sunday - my son left the computer on overnight, and when he went to turn it off the next morning there was a blue screen error but I couldn't read it because the letters were all jumbled.It's just a blank screen, and then the Auto-Detect comes on and puts it in power save.
I've been trying to troubleshoot from another computer, Dell's tech sites told me to check this and check that, but since I can't even get Windows to start up.
I'm wondering if as a starting point I should try to reinstall Windows? Or try to boot up from the disk?
bit past the right and bottom edges of the monitor screen. things like my Netscape and IE browsers don't seem to run over when maximized, and my toolbar seems ok as well. I'm running Windows XP on a Compaq Presario 5012US with a Nvidia GeForce4 MX 420 video card. The screen resolution I'm currently using is 800x600, and adjusting this setting up or down does nothing to fix the problem. I just updated the drivers for my video card, and windows is up to date as well. I'm totally stumped on this. Awhile back I was having bigger problems with my display when I was also running my TV as a second monitor,
I'm running a NEC MultiSync XV17 monitor also.
I have lost the monitor on my screen that tell me where the volumne is set. How do I get it back on screen?
View 4 Replies View RelatedI currently installed XP Professional on my computer. Now everytime i boot my computer up it comes up in system bios. It tells me "Please select the operating system to start. So I choose XP Professional, then instead of coming up in the normal windows screen I have this little start up screen in the middle of the monitor. The color is all jacked up and so is the images.
View 7 Replies View RelatedHaving a problem with my screen. For some reason it is vibrating really bad. Its really hard to look at it.
View 10 Replies View RelatedYesterday I was trying to use the Live edition of Linux SUSE 9.1 on my old computer so I took the cord from my newer computer monitor and plugged it into my old computer, then it just said [Hz] ? So I plugged my monitor back into my newer computer and all it does is show the Sony logo and then the Windows XP Loading screen, then after that the monitor gos blank and the green light blinks next to the power button.
View 8 Replies View RelatedI also have been using a Dell 19" LCD (normal) monitor...using the analog connector rather than the digital one.When I hooked up the Samsung this afternoon, I got the desktop and installed the drivers because although the screen looked fine, I had a black 3" wide strip down the right hand side so the desktop wasn't full screen. I used the buttons on the monitor to make that adjustment and immediately everything 'stretched' to the right and the icons and fonts looked elongated.I have to tell you also that I normally use 1024x768 for my resolution. Using digital connector I remember it automatically went to the largest resolution available and everything was so tiny not only on the desktop but also on the net that I couldn't see anything. Digital would not let me readjust back down so I went back to the analog. The wide screen LCD is also using analog.
View 11 Replies View RelatedI don't know what is wrong with my computer. The screen just constantly twitches and it annoys me so much, I want it to stop. I'm not sure what the problem is. Could my monitor be messed up? I have a Dell Dimension XPS T600 from 1999 with XP, up to date virus software. Anyone know what could be wrong here?
View 7 Replies View RelatedMy VPR Matrix (XP Home) Notebook's screen can ONLY be seen in the sunlight--but even then it is nearly impossible to see! What I want to do is view the computer on my external monitor, so I can transfer some files to another computer--but I can't see to change the settings. Can this be done just using 'keystrokes' or is there some other way?FYI: I bought this computer from BestBuy. It was quite expensive in 2003. recently, I brought it back to have it repaired. The Geek Squad wrote up a work order and charged me a $238.00 non-refundable deposit (as the warranty was no longer in effect). They told me they'd have to send it to California to be repaired.
View 11 Replies View RelatedI had to reformat my pc and after doing so all the icons/font etc is the size for my original screen. I went under device manager to update the monitor and it's still the same size.
View 4 Replies View RelatedI am running XP Home on a HP PC with pentium 4. A couple of days ago I developed a soft pink and green surround on the monitor screen, heavier at the screen edge and fading to nothing an inch or two from the edge, normal colors within this area. I have tried variations in settings, resolution etc but nothing I have changed has affected the problem.
View 9 Replies View RelatedWeird things are happening in winxp x64 After it's been on a couple of hours if I put a dvd in the either of my dvd burners, the computer looses it's connection to my monitor and my monitor goes dark. And sometimes, I will get a blue screen when using the dvd players or sometimes when trying to run programs. HELP. Have to use system restore to get it to work right again.
View 11 Replies View RelatedI've installed the two software disks for my new LG monitor. However, I can't get the resolution to be full screen. I have a large black band at the top of my screen.
View 9 Replies View RelatedI recently re-installed win. xp on the dell insperation 2400. Everything went find except the resoluton wouldn't change from the 480 x ...so I tried to set up my dial up but I needed a higher resolution. I did finally find a way to get that although it was very poor quality and I figured that I'd be able to down load the proper driver once on line, which I did do, although I'm not sure it was the right one, as dell doesn't seem to have anything for that model of pc. Anyway I also downloaded the Microsoft updates to get back to current for the secruity stuff. When that was done it required restart, which I did. When it restarted the monitor remained blank after the win. xp part was done loading. I know its on and that my pc is sitting there running, but I can't see anything. I restarted using F5 and tried; last known good configuration, vga mode, and safe mode. In the 1st 2 no monitor. In safemode the whole screen filled with a dos like line repeated over again to fill the whole screen, then a message came on that said, "stop!!! fatal error and I can't remember what else. Can you help? I guess I should mention that I don't have the right driver disk that came with the pc.
View 14 Replies View RelatedI'm having two problems with my computer. I'm getting the windows installer screen always coming up at startup and staying on the monitor until I press cntl + alt + delete and then i'm getting that window in the background or bottom of the screen toolbar.
View 1 Replies View RelatedI just moved in to college and set up my computer, but due to limited space didn't bring my second monitor. Now my aim, and ventrilo windows are still on the other monitor but no way to get them to the current monitor for use.
View 2 Replies View RelatedI have a old Dell computer which I brought a 24" Dell HD monitor. I upgraded it with a new graphics card which has both VGA and HD capability hook-ups. Now we have a new tower to go with exisiting 24" monitor. My problem is I can not get a old standard VGA monitor to work with the old system listed above. When I plug in the the VGA monitor plug in the VGA outlet in the old computer I get no signal to the monitor. What do I need to do with drivers or other wise to get the old computer back to being able to be used with the old VGA monitor?
View 2 Replies View RelatedI replace my old LCD monitors (Dell 1905s) with new acer P223w's. I have a dual monitor display.I power off both monitors with one switch that cuts off the power. When I do this however, Windows makes the sound like a device has been disconnected and it messes up my monitor settings. This is very annoying and it didn't happen with my other monitors nor does it happen on my other Windows XP system with different monitors. It's like Windows is trying to be "smart" by thinking the monitor is gone. I do not want Windows to care if the monitor is powered off.
View 5 Replies View RelatedI wonder if it is possible to switch off the computer's monitor manually.
System Control / Energy provides the possibility to define how long the
computer must idle to disable the monitor. I want to do that "by hand". Is
that possible?
I am using an elderly 3M LCD projection panel on an overhead prjector for big screen Tv, driven by XP pro SP3. The panel has no controls for vertical/horizontal size and whatever monitor is used, an OS desktop fills the screen by default. I can resize the window for the TV viewing program in the normal way,just filling my projection screen, but the XP desktop is far too large.Does anyone know of a way to change the physical size of the desktop (including the taskbar) so that it sits in the LCD screen with a blank border all around, or maybe even make it custom resizeable as in a program window ( without changing the resolution)?
View 2 Replies View RelatedI've got an HP notebook with Windows XP. I just went out and bought an s-video cable so I can use my TV as a second desktop, but I can't get the damn thing to work and now I want to kill. Here's what's happening: when I go into display properties and screw around with the 1 and 2 monitors and try to "extend my windows desktop", my monitor turns off for a second and the TV blinks like it wants to work, but then the monitor turns back on and the TV just stays blak. Same thing happens when I do the FN+F5 thing.
View 2 Replies View RelatedIf I was to purchase a new PC, could I attach it to a old windows 98 monitor i have. If so is there some PC's that would work better then others and about how much could it cost?
View 1 Replies View RelatedI have a Gateway computer that’s about 4 years old running Windows 98. It includes a Gateway VGA monitor (model EV700). I had to reformat the hard drive and reinstall windows using their resource CD’s. Everything is fine now except the monitor will only display the lowest resolution settings. I have tried to change the resolution through the display icon in control panel, but it will not allow me to increase the resolution. I have even gone to the Gateway web site and download the latest driver for this monitor, but still have the same results.
As a result, the monitor will no longer display graphics of any kind while on the internet or while working with photo imaging software.
My PC has just a VGA port. How can I setup a dual monitor?
View 7 Replies View Related