First time this happened. I plug in my monitor into my custom built, like I have done before.
it tells me that
"OUT OF RANGE"
hf:30khz-60khz
vf:55hz-75hz
"CURRENT FREQUENCY"
hf:30.2khz vf:48hz.
Can some one help me to fix this?
Much Abloge
Everytime I Delete A File, My Monitor Flickers. It Looks Kinda Like When You Set The Resolution. But Nothing Is Changed. I Tried Setting The Correct Driver For The Monitor, But The Problem Consists. I'm Using An Nvidia GeForce4 MX4000 With A Komodo Monitor(Set At 1280x1024).
View 7 Replies View RelatedI recently re-installed win. xp on the dell insperation 2400. Everything went find except the resoluton wouldn't change from the 480 x ...so I tried to set up my dial up but I needed a higher resolution. I did finally find a way to get that although it was very poor quality and I figured that I'd be able to down load the proper driver once on line, which I did do, although I'm not sure it was the right one, as dell doesn't seem to have anything for that model of pc. Anyway I also downloaded the Microsoft updates to get back to current for the secruity stuff. When that was done it required restart, which I did. When it restarted the monitor remained blank after the win. xp part was done loading. I know its on and that my pc is sitting there running, but I can't see anything. I restarted using F5 and tried; last known good configuration, vga mode, and safe mode. In the 1st 2 no monitor. In safemode the whole screen filled with a dos like line repeated over again to fill the whole screen, then a message came on that said, "stop!!! fatal error and I can't remember what else. Can you help? I guess I should mention that I don't have the right driver disk that came with the pc.
View 14 Replies View RelatedI haveWin XP Home SP2, and an ESS ES56H-PI Data Fax Modem.Unfortunately, over the week-end I completely screwed up my PC when trying to install a Linux O/S, and had to re-install Win XP - which I have successfully done. I am now re-installing my various applications,and have installed Win XP Fax using the same procedure as I used last November (Faxing in Windows XP by Sharon Crawford). Everything seemed to go OK, but when I try to send a fax I get an error message on the Fax Monitor: 'Fax device error'.
View 2 Replies View RelatedAny ideas? Tried to manually remove via the windowsinfetnm.inf without success. Removing from Network Properties HANGS the window
View 2 Replies View RelatedI tried to use our volunteer fire company Gateway computer with a flat screen monitor and "Wrong Frequency" came up on the screen. There was a count down of about 15 seconds before the screen went black. There was no "clue" as to what to do during the count down. I had used the computer the day before with no problems. The OS is "2000."
View 6 Replies View RelatedWhen i boot up my system(wind xp pro)i get message that says 'metadatamonitor has encountered a problem and must close' with the usual ,send error report or don't send.I click on don't send and carry on my merry way without any apparrent problems.What does it all mean people
View 8 Replies View RelatedI just moved in to college and set up my computer, but due to limited space didn't bring my second monitor. Now my aim, and ventrilo windows are still on the other monitor but no way to get them to the current monitor for use.
View 2 Replies View Relatedthe windows will freeze after running 2 hours with doing nothing. when it is booting up, there is a messages says: Hardware Monitor Found an error, Enter Power Setup menu for details. Now, I enter the BIOS in Power Menu, everything seems fine.I took out one memory stick, It ran fine until I reformatted the harddisk. and all the mistakes come out after i formatted the hardisk? How can there be an explanation?
View 11 Replies View RelatedWhen Windows adds a new monitor using the standard driver, can it detect the aspect ratio? When I hooked up mine, all the resolution choice were for 4:3 monitors. There were no widescreen options. It should choose the monitor's native resolution on its own if the monitor is an LCD.
View 2 Replies View RelatedI have a old Dell computer which I brought a 24" Dell HD monitor. I upgraded it with a new graphics card which has both VGA and HD capability hook-ups. Now we have a new tower to go with exisiting 24" monitor. My problem is I can not get a old standard VGA monitor to work with the old system listed above. When I plug in the the VGA monitor plug in the VGA outlet in the old computer I get no signal to the monitor. What do I need to do with drivers or other wise to get the old computer back to being able to be used with the old VGA monitor?
View 2 Replies View Relatedmy darn gateway monitor screen is too wide. How do i reduce it to the regular size? I pressed Ctrl and held down on the scroll lock and nothing happens. i tried to reset it with the monitor button but nothing happens.i can not view the right side graphic on my monitor
View 8 Replies View RelatedI am getting an error while trying to install the latest international drivers for my laptop computer
Windows XP Home Edition Service Pack 2 (build 2600) NVIDIA GeForce FX Go5700 [Display adapter] 3.20 gigahertz Intel Pentium 4, 8 kilobyte primary memory cache 512 kilobyte secondary memory cache
Earlier today when logging into a site, I pressed enter, just as a "Do you want to install..." box popped up, so it took my enter as yes and began installing all kinds of spyware.I scanned and removed the spyware using both Microsoft Antispyware and Spybot but I am still having problems.A while after it had installed, my PC just started switching itself off. No shutting down, just switched off, then on again. When it came back on, it said Windows had recovered from a fatal error which turns out to be an error due to my graphics card driver.I then updated the driver to the latest intel one, same thing happened. It does it every 30 mins or so, its driving me crazy!I thought about reinstalling windows, however when I tried to backup and move my important folders to CD, it said there was an error copying them.
View 6 Replies View RelatedI just bought a KVM swith (JustCom) for 2 XP machines, and it worked for a bout 10 seconds )as both machines were booting) then one of the PCs "found new hardware" and "installed" it, and it stopped working. There is a key combination to make it toggle, and it simply doesn't work. It could be the fault of the switch I'm sure, but then I would think they would blame it on windows. I noticed in the Device Manager that it says Com1, Com2 and the VGA adaptor have problems, basically there are no drivers installed. I tried to reinstall, update, roll back, install from the Windows CD, tried a windows update, and it says there are no drivers available to install or reinstall. I tried several System Restores and it always
says it couldn't do the restore (no reason given). Any suggestions? The only thing I can think of is maybe trying to Uninstall the hardware, or maybe reinstall windows
When the PC restarts it generates and sends an error report, which indicates a Graphics Device driver is the problem.My PC behaved ok until about a month ago, when it started crashing, in general with an error report saying 'Error caused by Graphics driver'.The system gradualy got more unstable until it would not boot properly at all.I have recently re-installed windows and upgraded to SP2.After this re-installation, the problem started again.
View 2 Replies View RelatedI have a Toshiba Laptop Satellite with windows XP, Service pack 2, and always when I open a photo or see a movie with windows media player it changes the screen resolution and always came too big so I have to restart the laptop. The solution of microsoft is to update the graphic driver but when I go to the web page they don´t have an update for me, and also in the toshiba web page.
View 5 Replies View RelatedI have been receiving a bsod error lately it says BUG_CODE_USB_DRIVER I Have Done Lots Of Searches On Google But Nothing Has Helped Me Out So I Am Asking My Self. Here Are Some Pics Of My Error Report.
View 7 Replies View Relatedmy computer with xp was running fine until i found that it was not showing my cd drive. I've checked the neccesary connection and they were all fine. the device manager shows the drive with a yellow sign giving error code 39 which says that driver is corrupt or missing. now my cd drive is a plug and play and does not have any driver bundled with it. uninstalling and reinstaling the drive wont help. xp detect the new hardware at the start up but again same problem.i wanted to reinstall xp but since cd drive is not available i tried to run it from hard disk. but it too was not running.
View 9 Replies View RelatedI'm using this for the first time to restore to a different computer. During the restore I'm getting a message to put the chipset driver on removable media.I've downloaded the driver and ran the exe to extract the files. There are a bunch of files and some of them are in folders. I get the impression that the restore program may only be looking in the root directory of the flash drive so I'm wondering if I need to take all the files from the folders and put them in the root directory of the flash drive. I don't want to put more than necessary in their because I have a lot of files already on there.
View 6 Replies View RelatedMy motherboard is an ASUS P4V8X-MX with on-board audio, C-Media AC97 version CMI9761A. The latest version of the driver and operating software from the C-Media website is dated December 2004.I have two hard drives, both the exact same type (Western Digital WDC 3200JB, 320 GB), both with Windows XP Professional with Service Pack 2 installed. On my second hard drive, I continue to be able to play DVDs on any of my DVD player programs that I wish, with no problems. However, on my primary hard drive, I have run into problems. Some time ago, I don't remember anything about what might have caused it, both Windows Media Player 11 and InterActual Player 2.6 (http://www.interactual.com/) stopped playing my DVD's. I could still use InterVideo WinDVD or my ATI Radeon X700's DVD playing software, with no problems, but WMP and IAP stopped playing them. WMP would give me an error that, when I clicked "Web help," said it was related to my Sound driver. I went to Windows Update and downloaded the following update:
Windows XP C Media Electronics Incorporation - Sound - C-Media AC97 Audio Device Tuesday, August 21, 2007 Windows Update.But this only made the problem worse, not better-- now when I try to use WMP or IAP to play a DVD, my computer screen just up and suddenly goes dark and I hear the unmistakeable sound of my computer simply up and shutting down, and then it does a total system reboot. After the reboot I get a popup saying the computer has recovered from a Stop Error, caused when a Device Driver suddenly "stops" the operating system.This is a very serious problem because a number of my DVD's are specially optimized to work with InterActual Player and automatically start it up when I put the DVD in the drive. If I try to uninstall the program, then the next time I put one of those DVD's in the drive it absolutely absolutely ***ABSOLUTELY*** forces my computer to reinstall the software immediately.
I have been getting BSOD for about 2 months now and always when i play a game especially bf2 and cod
after every BSOD it comes up device driver error but all drivers are fine,I have changed RAM,PSU and mobo after last time i was pulling my hair out and now its started doing it again after nearly 2 weeks
my system is as follows:
AMD A64 3200(winchester)skt 939
MSI neo 2 platinum NF3 ultra mobo
Giel pc 4000 ultra 2x512
Radeon X850 XT PE (agp)
I have 2 pesky errors that I would love to get rid of "ATI Advanced Desk Top Utilities failed to initalze because no ATI driver is installed or is not working properly." "ccRegvfy.exe- unable to locate componet......This application has failed to start because SYMSTORE.dll was not found. Re-installing this application may fix this problem."
View 5 Replies View RelatedI'm getting pretty frequent shutdowns with the below information. When the box re-boots, the message says device driver but never can point which device driver. Can anyone have a look at this and give me some advice?
View 7 Replies View RelatedPC with Windows XP Professional Edition 2002 SP2 has no sound.I tried installing Sound Blaster,but this is the error I got: That is the error message I get when I try to Install Setup.exe,which I need to use to install Sound Blaster.My PC won't let me install Sound Blaster without setup.exe it says the setup.exe I have doesn't work, which can't be installed without installing IIS.
View 6 Replies View RelatedAttempt to reinstall windows i have 2 striped drives, i need to reinstall my raid drivers but every time i try to install the drivers it always says that it can't read it, i finally got it to read but then it says this file caused an unexpected error and the installation fails and i'm back at my original installation of windows.
View 10 Replies View RelatedI replace my old LCD monitors (Dell 1905s) with new acer P223w's. I have a dual monitor display.I power off both monitors with one switch that cuts off the power. When I do this however, Windows makes the sound like a device has been disconnected and it messes up my monitor settings. This is very annoying and it didn't happen with my other monitors nor does it happen on my other Windows XP system with different monitors. It's like Windows is trying to be "smart" by thinking the monitor is gone. I do not want Windows to care if the monitor is powered off.
View 5 Replies View RelatedI wonder if it is possible to switch off the computer's monitor manually.
System Control / Energy provides the possibility to define how long the
computer must idle to disable the monitor. I want to do that "by hand". Is
that possible?
I just got a blue screen with the following information:STOP: 0x0000008E (0xC0000005, 0x805677C4, 0xEF8C7D40, 0x00000000)I'm currently running Windows File Protection...but I don't know if there is anything else I should do.
View 2 Replies View RelatedI was informed today that our home computer has been freezing over the last day or so. I logged on and looked up some info on the error i was described, then perhaps fortunately, i got the vile BSOD. This is what was contained:Then it began a memory dump.It claims a device driver error, but i do not recall installing anything recently. the windows report proved less than helpful (surprise).
View 1 Replies View RelatedEvery time I try to install the si3112 driver I get an Install key fail error followed by an install driver error. I have tried to install it off both a floppy and the nvidia cd and both give me the same errors.
I have no trouble installing the si3112r driver (the raid) version' but I want to use it as my start-up drive. I have a GA-K8N PRO mobo and the drive is a WD3200ks. If I can't get it to run where can I download a replacement dirver from --with-out haveing to download a huge driver package?