Window Hang When Removing "Network Monitor Driver"?
May 23, 2007Any ideas? Tried to manually remove via the windowsinfetnm.inf without success. Removing from Network Properties HANGS the window
View 2 RepliesAny ideas? Tried to manually remove via the windowsinfetnm.inf without success. Removing from Network Properties HANGS the window
View 2 Repliesname of pc is not accessible. you might not have permission to use this network resource. contact the administrator of this server to find out if u have xs permissions. Logon failure : the user has not been granted the requested logon type at this computer
View 10 Replies View RelatedWindows Explorer has crashed a lot of times on all of them especially when doing one of the following: Closing WE while it is searching for a networked
computer Looking at the contents of a CD-ROM in WE and then removing the CD without first closing WE. Usually it sends a report to MS, and then the task bar with the start button disappears. I have to Ctrl-Alt-Del to be able to log out and restart.
First time this happened. I plug in my monitor into my custom built, like I have done before.
it tells me that
"OUT OF RANGE"
hf:30khz-60khz
vf:55hz-75hz
"CURRENT FREQUENCY"
hf:30.2khz vf:48hz.
Can some one help me to fix this?
Much Abloge
Everytime I Delete A File, My Monitor Flickers. It Looks Kinda Like When You Set The Resolution. But Nothing Is Changed. I Tried Setting The Correct Driver For The Monitor, But The Problem Consists. I'm Using An Nvidia GeForce4 MX4000 With A Komodo Monitor(Set At 1280x1024).
View 7 Replies View RelatedI have been trying to install VGA in my laptop but could not do it. some kinda of error msg comes out and restarts the window.
View 1 Replies View RelatedI recently re-installed win. xp on the dell insperation 2400. Everything went find except the resoluton wouldn't change from the 480 x ...so I tried to set up my dial up but I needed a higher resolution. I did finally find a way to get that although it was very poor quality and I figured that I'd be able to down load the proper driver once on line, which I did do, although I'm not sure it was the right one, as dell doesn't seem to have anything for that model of pc. Anyway I also downloaded the Microsoft updates to get back to current for the secruity stuff. When that was done it required restart, which I did. When it restarted the monitor remained blank after the win. xp part was done loading. I know its on and that my pc is sitting there running, but I can't see anything. I restarted using F5 and tried; last known good configuration, vga mode, and safe mode. In the 1st 2 no monitor. In safemode the whole screen filled with a dos like line repeated over again to fill the whole screen, then a message came on that said, "stop!!! fatal error and I can't remember what else. Can you help? I guess I should mention that I don't have the right driver disk that came with the pc.
View 14 Replies View Relatedconstant pop-up window in email regarding network log on followed by window that says I can't long on (though I am on)
View 2 Replies View RelatedI am looking for a good utility that monitors live individual IP network usage. I run a game server and when people use certain hacks their IP network usage climbs significantly. I use comodo internet security which will tell you IP usage in active network connections but the list isnt sortable and the active connections are lost in a long list of closed connections. I was using netpeeker to view the connected IPs usage but it was incompatible with comdodo and resulted in all large file downloads failing. Is there a utility that can do this without conflicting with comodo? I dont need any bandwidth limiting or anything I am just trying to identify IPs that have usage spikes.
View 7 Replies View RelatedWe have a Dell machine running XP Home, connected to our DSL network. It is an independent connection: I do not use Network Connection Sharing. Recently my wife complained that she cannot access the net, When I Went to Control Panel|Network connections the window comes up blank.
View 1 Replies View RelatedI work at a school district here in FL and we have come across a strange issue. When someone logs into windows, sometimes our kix script will not run and the network drives will not map no matter how many times we log off and log back in. The only solution we can find is disabling the IEEE 802.1x setting on the authentication tab of the local area connection. It doesn't seem to be happening with all of our systems and seems to be sporadic. As soon as we disable this setting and log back in the drives will map. Any idea why this is happening and anyone have a solution? Our PC's are running Windows XP Pro w/SP2 and our servers are Win 2k3.
View 5 Replies View Relatedi just reinstalled iti need the network and sound driversproblem is their yellow and don tknow which drivers to getthe make of the machine is DIGITAL MILLENIUM / ASUS motherboard
The Driver for a wireless network adapter mn-720 needed.
View 1 Replies View RelatedAfter reinstalling Windows XP Home edition on my PC I have found that a driver for the Network Card could not be found (see attached file containing pics). In Device Manager the network card does not appear under network adapters but instead under other devices as an Ethernet Controller with a yellow question mark and exclaimation point. Unfortunately, Windows does not appear to have a driver and I can't connect to the internet to search for one.I tried installing DriverGuide which says the device is an "82551 10/100 Mbps Ethernet Controller" made by Intel.
View 2 Replies View RelatedI have installed XP on my sisters Laptop which is a Gateway Model: ML6228 because she did not like Vista on there. Now I was looking on the Gateway site for Network Drivers for this model and the only one they had was for Vista only, Network Downloads
D20053-002-002.exe - Windows Vista (32-bit or 64-bit) Broadcom Wireless Network Driver version: 4.102.15.61 Supports: Windows Vista (32-bit) Note: This file contains the Windows Vista (32-bit or 64-bit) network driver for the computer models and components listed below. English, Japanese, and Spanish installation instructions are included in the file.
I have a Dell D600 Latitude that was working fine, then i opened and email that i thought was from my sister and now my network adapter is not recognized and reflects the yellow!. I bought a Linksys USB ethernert adapter and get the same result. The drivers cannot load.I have no way of connecting this computer to the internet to run updated virus software or go to Dell to run diagnostics.
View 2 Replies View RelatedI need a driver for my network card - a RAS Async Adapter. Can't seem to find a proper download anywhere on the net! Not even on Windows Update.
View 9 Replies View RelatedI had to wipe clean and install Windows XP on a computer that had a few virus' from work.This is store bought Windows XP, and it can't find the right driver for the network adapter. I have run Belarc Advisor and it doesn't even list a network adapter. Now when this had Windows Server 2002 it could hook up to the internet and browse it just fine. I tried several anti virus programs and none could get rid of the virus this machine had. Hence the wipe clean and install.
View 10 Replies View RelatedI am going to install a new OS Windows XP , Home with sp2 on my computer , at least try. Now i remember that the network adaptor is one of the things i need to d/l drivers for , well i have already run into trouble i have a Intel Pro/1000 CT network adapter and can not find the driver for it.
View 7 Replies View RelatedI am having a problem with my printer after installing network magic. Everytime I send a document from the main pc to the printer connected directly to it, I get a stop screen and a reboot. When it comes back I do the Microsoft error report and it says there is a problem with a driver.
View 2 Replies View RelatedBrief synopsis:I recently did a new Windows XP install (after a crash). Now I cannot get my printer to install. The printer is a SHARED printer (HP Deskjet F380) on another machine on the network. The printer was previous installed on this machine before the crash and reinstall of WinXP.After nearly 2 hours on the phone w/ HP support, it's been determined (by HP support) that somewhere in the XP install, a missing XP driver is keeping this install from properly allowing any printers to be installed. The printer will 'appear' to be installed, but any attempt to print brings an error saying printer drivers aren't properly installed.
View 14 Replies View RelatedHow do I create network shortcuts in My Network Places? There are several computers on my network and on them, specific specific drives and specific folders that I use frequently. I'd like them to show up on all the computers, but I don't know how to create them? A second, related question, can I safely delete shortcuts that appear there that I don't use?
View 11 Replies View RelatedI just moved in to college and set up my computer, but due to limited space didn't bring my second monitor. Now my aim, and ventrilo windows are still on the other monitor but no way to get them to the current monitor for use.
View 2 Replies View RelatedWhen Windows adds a new monitor using the standard driver, can it detect the aspect ratio? When I hooked up mine, all the resolution choice were for 4:3 monitors. There were no widescreen options. It should choose the monitor's native resolution on its own if the monitor is an LCD.
View 2 Replies View RelatedI have a old Dell computer which I brought a 24" Dell HD monitor. I upgraded it with a new graphics card which has both VGA and HD capability hook-ups. Now we have a new tower to go with exisiting 24" monitor. My problem is I can not get a old standard VGA monitor to work with the old system listed above. When I plug in the the VGA monitor plug in the VGA outlet in the old computer I get no signal to the monitor. What do I need to do with drivers or other wise to get the old computer back to being able to be used with the old VGA monitor?
View 2 Replies View Relatedmy darn gateway monitor screen is too wide. How do i reduce it to the regular size? I pressed Ctrl and held down on the scroll lock and nothing happens. i tried to reset it with the monitor button but nothing happens.i can not view the right side graphic on my monitor
View 8 Replies View RelatedI cannot view in full screen anymore.I created a website that lets a user enter their name and social # and then choose a test in 1 of 3 languages. Once you choose a language, a new browser window opens and the test/information is displayed in this new window.
View 8 Replies View RelatedI replace my old LCD monitors (Dell 1905s) with new acer P223w's. I have a dual monitor display.I power off both monitors with one switch that cuts off the power. When I do this however, Windows makes the sound like a device has been disconnected and it messes up my monitor settings. This is very annoying and it didn't happen with my other monitors nor does it happen on my other Windows XP system with different monitors. It's like Windows is trying to be "smart" by thinking the monitor is gone. I do not want Windows to care if the monitor is powered off.
View 5 Replies View RelatedI wonder if it is possible to switch off the computer's monitor manually.
System Control / Energy provides the possibility to define how long the
computer must idle to disable the monitor. I want to do that "by hand". Is
that possible?
Ever since I bought my laptop a couple of years ago I have had this annoying screen pop up every time the computer starts up entitled Avance AC '97 Audio Setup (4.70) Maintenance Complete..in the window itself it reads....
Installation wizard has finished performing maintenance operations on Avance AC'97.restart computer now or later
When i open any link with "open in new window" the new window is not full size screen window.Of course i dragged it by mouse many times and that should fix it later.It means it should be opened as it had been dragged,but that's never happened though i dragged it about a hundred time as a full screen size.What is the wrong here?
View 1 Replies View Related