I use XP Home +SP2 and Office XP Standard + SP3. My dial up modem is Conexant
SoftK56 I have added Fax Services from Windows Components via Add/Remove Programmes and all works correctly. However on turning off and restarting the PC the facility fails when attempting to Fax as printer cannot be found. On checking 'fax' printer via control panel this message is eventually given "Microsoft shared fax driver" printer driver is not installedThe only way to re-establish Fax Services is to remove via windows components, reboot and reinstall as above.
I'm stupid so I messed up with services using a tweaking guide to make my pc faster.and now I can't access shared folders of computer's on my network. meaning that "My Network Places" is empty.
Brief synopsis:I recently did a new Windows XP install (after a crash). Now I cannot get my printer to install. The printer is a SHARED printer (HP Deskjet F380) on another machine on the network. The printer was previous installed on this machine before the crash and reinstall of WinXP.After nearly 2 hours on the phone w/ HP support, it's been determined (by HP support) that somewhere in the XP install, a missing XP driver is keeping this install from properly allowing any printers to be installed. The printer will 'appear' to be installed, but any attempt to print brings an error saying printer drivers aren't properly installed.
I had to reinstall XP and computer runs very slow on boot. Under device manager, there was an exclamation beside "Microsoft System Management Bios Driver". Iwent to a help site and it said to just unistall it.
I am using Microsoft XP with a dial up connection. I use Earthlink mail and any time I try to access mailbox i get this message. It appears that my driver is corrupted or otherwise unaccessable. I began having this problem after running Obits Advanced System Care. I have restored changes made by the program to no avail. Can someone tell me how to reinstall this ODBC driver or access it. I am able to access my email through web mail.
The device manager stated window could not load this driver for microsoft system management bios driver and intel (r) 82801eb usb2 enchanced host controller - 24dd. I have run windows service pack 2 but still not resolved it.
And also my pc is running very slow during boot and browsing. For your information my pc is p4 3.06ghz. I have run hijackthis program, but dont understand its content which is to be removed.
Since installing Windows XP SP2 (upgrade from SP1) I noticed that Standby does not function. When I manually go to Standby, or if my laptop tries to go into Standby as per the power management settings I have set, I get the following message: "Standby has been prevented by the Standard 101/102-Key or Microsoft Natural PS/2 Keyboard device driver. You may need to install an updated driver."
Any ideas on what I can try. I have tried uninstalling the keyboard in safe mode and rebooting to reinstall the keyboard drivers. I have also checked my BIOS settings, and tried resetting the power management settings. I have even updated my ATI video adapter drivers. I noticed the problem shortly after installing SP2. There are no updated drivers available from Gateway for the keyboard.
i have windows XP home edition service pack 3. and i use Microsoft office 2003, and well recently it began to pop up and say microsoft office word has not been installed for current user. please run setup utility. Well i only have one user, never had another user created until recently (temporary fix) is there anything i can do, the main user is called the owner, it says its the computer admin, but i guess there is still an admin user, i cant get to that. the only way i can get ms office to work was to create a new user, open all the office programs, export the office registry, and import it to my main user, thats the only thing that works, for a little bit.
I have a Gateway 7422GX which as a Mobility Radeon 9550. I repaired windows using the cd because I restarted my computer and it was either going to take 7min+ to boot, or just wasn't going to. I got stuck at the windows splash screen. I'm using windows professional. Whenever I try to install any of the drivers, I get the same error message: Setup did not find a driver compatible with your current hardware or operating system. Setup will now exit.
I have two computers, "This" and "That" networked via a Linksys cable router, both running XP Pro. Using Acronis True Image I backed up the C: drive of "This" to the shared documents of "That" computer. I wanted to back up directly to Backup (F) of "That" computer because it's a shared drive (partition). True Image kept disallowing it so in the end I sent the file to the shared documents folder.Now, I can't send the file to anywhere else on "That" computer. The error window is headed "Error copying file or folder". The actual message says:Cannot copy filename: there is not enough free disk space. Delete one or more files to free disk space, and then try again. To free space on this drive by deleting old or unnecessary files, click Disk Cleanup.
I'm not sure what settings I need to tweak, but I'm sure someone here as experienced this and might know. I have a desktop and a laptop, both running XP (desktop XP Home SP2, laptop XP Media Center SP2). Both systems are running ZoneAlarm firewall and both are current and set up properly for my network and for file sharing. I have file sharing/print sharing set up, and have no problems sharing files both ways...except... On both systems, I have "My Documents" shared, with both boxes check to "Share this folder on the network" and "Allow network users to change my files".
This problem started up after the last format of my computer. I have the usual folders shared on my computer which consists of my shared docs, music, DOD/CS:S maps and games. During LAN parties (or any other time) nobody can get files off my computer. They are shared just fine, they can see the files, but when we try to transfer it says "Cannot copy *filename* - access is denied. make sure the disk is not full or right protected and that the file is not currently in use." The file transfer bar will go like it is transferring, but when it is done I get that message. It doesn't make sense. I have these two boxes checked under "sharing" in folder properties: "share this folder on the network" and "allow network users to change my files." All firewalls are off. This happens over 4 different routers. I have reconfigured the network many times.
The only thing I can think of that may have caused it is that I deleted the microsoft .net asp account that is installed with microsoft .net framework. would that do it? I haven't had the energy to re-install that yet. I deleted it so I wouldn't have to select an account on startup. Anyway, if you have any input I would appreciate it because this is annoying. Update: And I have just determined that I can listen so some songs on media player over the network, but I can never transfer them between computers.
Under My Computer you will notice a new folder called shared documents. Microsoft has made it easy to share files and folders over a network by dragging icons into it. If you wish to remove this folder from My computer all you have to do is delete a key from the windows registry.
I have shared my folder in to LAN network on your company. I know someone access in to that folder and chane information the files. So, How to trace log in windows XP and know who has access and changed
I used to be able to access the shared folders that are on my computer that is running windows XP on my vista laptop and my xbox 360 but they are no longer showing up I just spent a couple of hours trying to get it working again but nothing
I did the drag & drop for two folders into the shared folder & now I can't open them. I keep getting this message “C:Documents and Settings All User Documents Config ame of folder is not accessible. Access is denied." I have also tried to copy & cut them back to the original folder.
Am trying to set up a network with xp Home edition. I am curious about a couple of things. What is the difference in copying verses moving a file to the shared document folder? I would thing that by copying it, one is "duplicating" it and thereby using up resources. IF that is the case, when you access a file and make changes, are the changes saved to both places?
I have a standard 3 PC Windows XP Workgroup. PC1 has a printer connected to it's USB port. This Printer is shared and set to allow "Everyone" full controll.PC2 is able to connect and print to the shared printer on PC1.PC3 is also able to connect to the shared printer but it takes 4 minutes to connect and then another 4 minutes when you try to display the printer properties. Even when connected, you can not print to the shared printer.All 3 PCs use the same user name and password. All 3 PCs have the local user name in their Admin group. All three PCs are connected using the same 192.168.x.x/255.255.0.0 IP address range.I have seen this happening with shared folders as well.
I have a computer that is connected to the internet through a shared internet connection (I mean I choose this computer connects to the internet through another computer in Windows XP Network Setup wizard). I have another laptop that I want to get connected to the internet through this computer. Bu Windows does not allow me to share the LAN connection which connect this computer to the internet. how can I share a shared internet connection.
Quote :NEW YORK (Reuters) -- A U.S. federal jury found that Microsoft Corp. infringed audio patents held by Alcatel-Lucent and should pay $1.52 billion in damages, the No. 1 software maker said Thursday.
Microsoft said it plans to first ask the trial judge to knock down the ruling and will appeal if necessary. It said the verdict is unsupported by the law and that it had already licensed the technology in question from Germany's Fraunhofer.
Alcatel-Lucent had accused the world's biggest software maker of infringing patents related to standards used for playing MP3 digital music files.
I am having a system with XP Pro x64 with multiple shared folders. Here is the setup. I have about 10 users (1 Admin account, 9 Limited accounts). I have created 10 folders for each User and modified them as shared folders with each user having access to their respective folders ONLY while the Admin account will have access to all folders. I have disabled 'Simple File Sharing', switched off Guest Account. Now I can view this system on other systems on the n/w. But the problem is, if I map a shared folder on one system, I was not able to map anymore on other systems and it gives error, 'the system can not accept multiple connections' in those lines.
