Accessing Multiple Shared Folders On Windows Pro X64?
Feb 15, 2009
I am having a system with XP Pro x64 with multiple shared folders. Here is the setup. I have about 10 users (1 Admin account, 9 Limited accounts). I have created 10 folders for each User and modified them as shared folders with each user having access to their respective folders ONLY while the Admin account will have access to all folders. I have disabled 'Simple File Sharing', switched off Guest Account. Now I can view this system on other systems on the n/w. But the problem is, if I map a shared folder on one system, I was not able to map anymore on other systems and it gives error, 'the system can not accept multiple connections' in those lines.
From my XP SP2 (Media Center Edition) computer, I can access shared folders on my other computers (a Vista, a W7, and another XP computer). However, those computers cannot access shared folders on this computer (the XP SP2 machine).The shared folders are visible from the other computers, but when they attempt to access them, they get a dialog box to log in with userid and password. I have tried various combinations of userid and password, including "thiscomputernameprimaryaccountname" with the associated password. Authentication fails.I am using simple file sharing.
I'm not sure what settings I need to tweak, but I'm sure someone here as experienced this and might know. I have a desktop and a laptop, both running XP (desktop XP Home SP2, laptop XP Media Center SP2). Both systems are running ZoneAlarm firewall and both are current and set up properly for my network and for file sharing. I have file sharing/print sharing set up, and have no problems sharing files both ways...except... On both systems, I have "My Documents" shared, with both boxes check to "Share this folder on the network" and "Allow network users to change my files".
I used to be able to access the shared folders that are on my computer that is running windows XP on my vista laptop and my xbox 360 but they are no longer showing up I just spent a couple of hours trying to get it working again but nothing
I did the drag & drop for two folders into the shared folder & now I can't open them. I keep getting this message “C:Documents and Settings All User Documents Config ame of folder is not accessible. Access is denied." I have also tried to copy & cut them back to the original folder.
Am trying to set up a network with xp Home edition. I am curious about a couple of things. What is the difference in copying verses moving a file to the shared document folder? I would thing that by copying it, one is "duplicating" it and thereby using up resources. IF that is the case, when you access a file and make changes, are the changes saved to both places?
I'm stupid so I messed up with services using a tweaking guide to make my pc faster.and now I can't access shared folders of computer's on my network. meaning that "My Network Places" is empty.
this problem is a little tricky to explain.I have 2 computers (A and B) on a home network, connected through a router and hard-wired with Cat5 cable. They are both running Windows XP Pro SP3 and file/print sharing is turned on. Simple file sharing is turned on.Both computers can Ping each other successfully. Both computers can "Net View" each other successfully.Both computers can see the other's shared folders in My Network Places.Computer A can access the shared folders on Computer B and transfer files, etc.
I have a new pc freshly installed with XP SP3. I used it as a server, I shared the two harddrives and mapped them as drive F and G on the network. The sharing and mapping is successfull, however, after a few minutes of being started (or after the pc has been restarted), the sahred folders and harddrives were self-disconnected for unknown reasons. My colleage timed it, and the sharing lasts only 15 minutes after restart then it is disonnected from the network. When i say disconnected - i mean i can't be seen from other PC's connected to the network, i need to restart the pc (again and again) in order for the harddrive and folder sharing is restored. I can say it is disconnected because the sharing icon (a hand with a disk drive on the palm) disappears and other PC's cannot access it.
I set up a shared folder on my hard drive for music that my daughter can listen to from her computer. Everything is fine, she can play the music with no problem. I wanted to hear a song, couldn't remember where or what it was named so I did a search for the song and surprisingly, the windows search returned three results for the song I wanted to hear. One song is in my music folder, and the other two songs are shown in the same folder. Here is an abbreviated search result for this one song:
I have this problem trying to connect to my laptop or desktop (both ways).I am able to see the shared folders, but if I want to access them I get a password prompt. It asks me for a password and nothing works, I've tried enable/disable guest account.
Building a new network of 6 boxes. All using WinXP Pro SP3.Yesterday I created a few shared folders - and they work fine all the other machines can access them. Installed a bunch of new software on the same main machine today also had a BIOS/registry/diskcheck issue - but everything seems fine now . EXCEPT, any folders I create as shared folders, while they show up on the other machines - all get the "can't be accessed permission denied" type of error message.The shares I created yesterday still work, they can be accessed, its just any new ones I create can not.simple file sharing is off, I edited the reg key to all anonymous connections, I added the NETWORK as a group allowed to access the new shares - but nothing works.
I am doing sharing like this.From Run i am typing the ip address after this it shows all folders.I am only sharing so i gave all permissions. then also i could not open the folder it shows the error message. v.sugumar Message was edited by: admin to remove email address to prevent spam harvesters from picking it up.
I am having a problem sharing a folder on my local network. Both PC's are using Windows XP Professional.Both PC's can see each other fine. I have simple file sharing disabled.When I try to access the shared folder I get the following error message:Quote: \CATHYTemp is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.Access is denied. Of course, if I grant permissions to 'EVERYONE' in the security tab, I can connect to share fine.
I have a home network with 3 PC's running XP Home SP2 and a Linksys Router. I had to replace the mother board in one of the computers and since then some ... not all ... shared directories are not accessible from the other 2 computers. If I attempt to open some of the folders I get an error message that says "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
Is there a way (on XP), to have password security on shared folders? We have a "backup server," which is nothing more then a workstation with Windows ME, that our users store files on. Everyone has their own folder with a different password. I can't get a HD to work that is larger than 120gb. I have an XP machine with a 300gb HD that I would like to use, but I absolutely have to be able to have passwords on the shared
I'm trying to connect to connect two PC's with XP Pro over a network via the shared folders. I know the domains are the same so that isn't the issue. The hidden share is still enabled on the other machine. I go to explorer and type in \PCnamec:$ and I get a message saying that I need to check my spelling. The name is correct, so how should I enter in the location in the address bar?
* By using "computer management"</a> i can see who are connected to my shared files in the LAN.<br> http://www.cleverworkarounds.com/wp content/uploads/2007/10/image3.png <br>* How can i make XP to log these events??<br> <br> For example who has been reached to my shared folders, and opened which files? Because i also wonder who has connected to my computer even i was not on my desk.<br>
In my E: Drive I'v found the free space getting reduce when i access its folders.I'v run a scan using ESET Smart security and a-squared Anti-malware while runing the scan the free space increased by 100 MB but the problem persist even after the complete scan.
I am working in domain with 30 desktops and one server. Every user is able to access shared folders from every other system as per rights assigned. But in one system, whenever an user tries to access shared folder he gets the following message: "\*.*.*.* is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The account is not authorised to log in from this station."
I can't open multiple files and folders, but my little registry hack Copy To, and Move To (info about it here: http://articles.techrepublic.com.com...1-6115665.html) opens up instead. I tried deleting those, but then nothing happens if I try to open multiple files or folders. I don't know when this happened, because I rarely open more than one file/folder simultaneosly.
Many times I save one file or word document or a web page in 2 to 5 different folders. Right now I do it by opening each folder separately and using save as dialog box. But this is redundant and takes up a lot of time.
I have built an new xp pro machine and upon first boot up, it created (among others) a My Documents folder. Then when I used the Files and Settings Transfer wizard, it moved my old My Documents folder from the old machine to the new one. Problem is, they have different names. I expect if I'd named them identically, there wouldn't be two of them. Each file I try to save defaults to the one from the old machine. My question is, can I safely delete the other?
Is it possible to select a large number of files and quickly organise them into folders say alphebetialy. eg Select>Send> aardvark.txt goes to folder named A ,zoo.mp3 goes to folder named z.
I recently performed a system recovery after getting a rather nasty virus. Everything else seems fine apart from these multiple instances of my administrator folder:
I'd like to delete all these un-necessary folders but when I try it says they are necessary for windows to run properly.
I did more than one system restore and each time the process created a new user folder. I first thought all my settings were lost but since discovered I had several new user folders and the computer was no longer using my original folder when I logged in.
i want to copy my custom desktop.ini file and background image to all of my folders that i have on my flash drive.So needless to say i dont want to to this one by one to each folder.
I know you can either hover over a folder in Explorer or right click, click properties and get the folder size - but what I want is a fix or utility that allows me to see multiple folders, ala Explorer, and see their size displayed - the way it does for individual files on the DETAILS setting
I know it's possible, but forgot the method. How do you command Windows to discover the folder where the certificate of authenticity number resides, that was originally used when installing the OS. I need to reload the OS from a recovery disk, but lost the original COA number.
