After installing xp home updates yesterday, my machine rebooted itself, then continued to reboot (xp would start to load then my pc would reset itself and start booting again)
Booting windows with the "dont automatically restart system on failure" option revealed I had a corrupt kernel32.dll, which was fixed by using recovery console to copy the file over again.
Once this is done, xp will boot. Then it tells me to update.
When I try to update windows xp (home edition) I receive the following message --The website has encounted a problem and can not display the page you are trying to view. The options provide below might help you to solve the problem. (tried all options no sucess)There are few (only) websites I cannot open (unable to display page come up).
View 4 Replies View RelatedThis isn't really a threatening problem, but I was wondering if anyone else has had the same problem: I downloaded Windows XP SP2 through windows update yesterday
I intalled it and everything was fine until i couldn't connect to the internet.
"modem Hadware failure" or something like that.So, i System Restored back to the point before I downloaded and installed SP2, and now i can connect without any problems.(I disabled all the windows firewalls that came with SP2, so I doubt that the firewalls were the problem)
I just recently had to do a repair on the ( OS XP Home SP2 System) and which was successful. In the process of re-installing the updates ( 81 ) , it will not install them ? Also, is there another way to download and install ? OS XP Home SP2.
View 8 Replies View RelatedOn my portable computer on which I have made a briefcase, I moved some files into it. When I try to update, hoping it will update my home computer, it say some files are read-only and these files were not updated. It is only the files I move in. When I check properties on the individual files, it say they are not read-only. When I check properties on the folders in the briefcase however, the read-only is checked and when I uncheck and go back in, it still is read-only. I am using XP Home Edition.
View 1 Replies View RelatedWhen I right click almost anything I get the explorer has encountered a problem and has to close. always the faulting module kernel32.dll. Then immediately another box appears with the drwatson postmortem debugger has encountered a problem and needs to close, I then have to ctrl alt del to close the drwtsn.exe and get my desktop back.
I have been having problems in psp7 with ntdll being the faulting module.
I run the bare minimum start up programs and have ran all virus and spyware scans. I have googled this problem until.
Im running windows xp pro sp2. AMD 2400
Have loads of disk space and plenty of free RAM.LV.
Every tme I am starting any new software on my windows 98 SE, I get an odd message error with black exclamation on yellow trian gle background: "Plik SWISHMAX.EXE jest polączony z brakującym eksportem KERNEL32.DLL:RestoreLAstError." And in English: "The file SWISHMAX.exe {the name of program} is connected to lost export KERNEL32.DLL:RestoreLastError".
Then I click ok, and there appearsnew error message: The device can't work.
I've been getting a lot of trouble with my computer lately; specifically, the desktop will disappear and show nothing but my background, then reappear, but some things in the taskbar tray will be gone, including Norton. Some programs reappear, but Norton never does until I restart. First off, is this Explorer crashing?
This error has been posted here before and Rollin' Rog has given me some pointers but to no avail. The problem that a friend of mine is facing is the following:
While she's surfing the net and a link opens a new window, the new window opens but the moment she closes this new created window, IE crashes which results in the following error in the eventlog (dutch Windows XP SP2
Whenever i try to run this program (Maplestory) i get this protection error, looks like this:
Protection Error
Error: Can't load library, KERNEL32.dll
i've tried system recovery, system restore, deleteing the stupid thing and downloading it, i've tried deteling anything that might have ANYTHING to do with the program.i also tried to download KERNEL32.dll from somewhere to replace the one in my WINDOWS/SYSTEM file but they wont let me.
three "Fatal Error Kernel32.dll cant be loaded" messages appear everytime this laptop starts up.........have no clue what's the problem is.HELP needed...plus i can't rigt click.....so i can't get much info but it iz a win xp dell latitude d610 intel centrino notebook.
View 7 Replies View RelatedAlright, I'm having a major problem running Windows XP. Whenever I try to run any program other than IE I get the error message:
"The procedure entry point CreateDirEctoryW could not be located in the dynamic link library KERNEL32.dll"
Now I'm no genius, but I think something has gone horribly wrong... is there any solution?
Can you help me get the KERNEL32 back in it's right place? This is the messege that popped up on the desktop on Windows 2000 OS:
Dark.exe � Unable to Locate DLL
The dynamic link library KERNEL32 could not be found in the specified path
C:WINNTsystem32gkjprnpshi;.;C:WINNTsystem32;C:WINNTsystem;CWINNT;C:
WINNTsystem32;C:WINNT;C:WINNTSystem32Wbem.
many times when im using some ones pc or using mine, there is always missing functions from dll files, mainly the kernel32.dll
and the missing one i care about is ThunkConnect32, used for audio
so can i either learn how add functions to the kernel32 or is there a kernel32 with all functions??
i have a program that lets me replace system files, so u dont have 2 explain that xP
Both IE7 and Outlook crash when viewing certain websites. Both come up with a
kernel32.dll error. I've tried many, many things with no sucess.Here's the IE7 error:AppName: iexplore.exe AppVer: 7.0.6000.165544 ModName: kernel32.dll
ModVer: 5.1.2600.3119 Offset: 0004b15d Outlook Error: AppName: outlook.exe AppVer: 11.0.8169.0 AppStamp: 465f28e3 ModName: kernel32.dll ModVer: 5.1.2600.3119 ModStamp: 46239bd5 fDebug: 0 Offset: 0004b15d
In Win-Explorer, whenever I right-click on a file or folder, then I get a dread message that "Windows Explorer has encountered a problem and needs to close"; the error points to kernel32.dll and eventually a similar message comes up regarding Dr.Watson.
Q. Is there any way other than a re-install of WinXP to re-enable the right click function?
Q. Is there some utility that I might run to restore the capability that I had or perhaps to UNinstall something that I could possibly put back?
Since I'd don't right click very often, am not sure but believe that the problem may have resulted from the installation of Nero8Ultra.
Each time i start up my Windows 2000 proffesional pc, I get an error message "kernel32.dll" just in a grey box and no options or anything. I had a problem withmy pc a while ago, had it wiped, and the other day i went on, it came up, i wasnt sure what it was so i just closed it :s, then i did my weekly virus scan, however mcafee doesnt work, also the internet is unbelieveably slow and often just says this page is unavailable. Msn messenger still works fine though?
View 14 Replies View Relatedhow can i terminate this error??because of this error i am unable to install TweakUI.
View 1 Replies View RelatedWhenever i try to run this program (Maplestory) i get this protection error, looks like this:
Protection Error
Error: Can't load library, KERNEL32.dll.
I play an online game and have played for 3 years. recently i havnt played because im getting a kernel32.exe failure. Well wow that really sucks. So im like. meh forget it ill just reformat. It starts the setup and what not and says. if you want to install windows xp press enter. or repair press r ok i press enter. Then it says that it cant find my hardrive. but all my files are there. i replaced the IDE cable and made sure my drive was set to master and was plugged in right. Nothing.i checked bios. so i get a new hard drive. my commputer gets a ndlr error on boot up.
View 2 Replies View RelatedI deleted the IE 6 because it was giving me an error when I tried to open it and got Mozilla because I was tired of trying to figure it out, yes I know, what a way to handle it heh. there are things I need IE for, MSN Messenger winks for one unless someone has found a way to make it work without IE. I installed IE7 on my computer, but it is doing the exact same thing that IE6 was, error when you try to open it Internet Explorere encountered a problem and needs to close.
Error details : AppName:iexplore.exe AppVer 7.0.6000.16473 Modname: kernel32.dll
ModVer:5.1.2600.3119 Offset: 00012a5b
I have been trying to fix an issue with a friends computer. Problem is I'm not very computer savvy :S So that's where you all come in :P I do have some knowledge of computer's and usually catch on pretty quickly. Basically I have been noticing my friends comp has become increasingly slow over the last week I have scanned with AVG and found a change in the following:
Shell32.dll, kernel32.dll, hosts, user32.dll, ntoskrnl.dll
I have tried searching for the shell32.dll and found it only to be in the C:/windows/system32 folder as someone recommended in another post I had read on here..Those are the only items showing in a complete scan of the system so I have no idea what is causing this..Also she has been noticing an increased amount of pop ups even when explorer is not running? I believe they are CID or CDI pop ups.
ive installed a game called big city adventure but wen i go to run it i get - the ordinal 947 could not be located in the dynamic link library kernel32.dll. ive tried reinstallin the game but still get it, ive even updated my directx n also deleted the game shortcut on desktop n resent it to desktop from the game folder but nothin helps. y am i gettin this error msg n how can i resolve it.
View 3 Replies View RelatedMy computer keeps popping up an error message saying: This program has performed an illegal operation and will shut down.
When I click on details it says: SDKAU caused an invalid page fault in module KERNEL32.DLL.
i have an icon from microsoft.saids it has updates to install for microsoft office, update service pack 3.the only thing is it won't update.and the icon won't go away until it gets updated .plus norton keeps giving me a box saids norton can't update feature.to uninstall norton than reinstall.now my son did up my whole computer so i am afraid to really touch anything.
View 5 Replies View Related"Install the ActiveX control required to view the website," but I don't get the bar saying to install it. None of the troubleshooting tips were relevant.
View 3 Replies View RelatedAfter installing and running MSE I have been unable to update definitions either manually or automatically. At the same time I noticed that microsoft automatic updates are getting to around 28 percent and then stopping - not fully downloading or installing. I cannot get through to any microsoft websites now - but all other sites are fine. wuauserv and bits are missing from services also. Have I been sneakily virused by something which MSE hasnt picked up. I tried to run malicious software removal tool - it downloads alright but wont install - says its not a valid win32 application. I correctly downloaded the 32bit app. Can anyone shed some light on any of this. I dont want to rebuild again and again.
View 12 Replies View Relatedwen i turn on my laptop it keeps goin on 3 of 3 updates but does not install updates .then turns of an repeats all over again .an wont recignise cd/reboot factory instalationhelp
View 1 Replies View RelatedI recently formated and restored windows to how it was when I bought it. Everything was ok except for updating using the Windows Update feature. I have it on, but when I go to the updating windows its not doing anything. Its suposte to scan, but its not scanning since it takes forever. On my other computer, it works in seconds.
View 5 Replies View RelatedMy computer has automatic update on it but it hasent been updateing lately so i went to windows update and found all the new updates for my computer and clicked "install New Updates" and it went to the download screen and said "Error Download Failure"
View 2 Replies View RelatedI would like to know how to uninstall an update that was performed by Windows Update.The update itself was in the "Hardware, Optional" Type list (ie. not
the"High Priority"or the"Software,Optional" list)The update that was installed shows up in the History log correctly I believe that Microsoft incorrectly scanned the computer and assigned a hardware update that pertained to a different type of hardware ... specifically, the update pertained to an "IBM Thinkpad UltraNav Pointing Device" whereas the actual hardware is a Toshiba Satellite with a Synaptics Touchpad".