Foxconn Motherboard Boots Really Slow
Aug 3, 2005I have a Foxconn motherboard and it boots really slow when its gets verifying dmi data pool does anyone have any suggestions on how I can speed up my system?
View 1 Replies
ADVERTISEMENT
Boots Getting Slow - Doing Tweaks
Feb 19, 2005I recently got a new Dell 3000. Boot takes forever, longer than my old computer. and sometime when i click on programs there's like a 30 pause before something happens. I even tried doing tweaks that i read about.
View 2 Replies View RelatedComputer Boots Very Slow
Jan 16, 2007I have a brand new comp. w/XP MCE the boot times and shut down times are way too slow. Mine boots slower than the P4 3Ghz at my school. (30 seconds to a minute after I press power)My specs:E6600 WD 7200 320Gb 1 Gb DDR2 667 (will get another gig around April)ECS P965T-A.I know it should boot a whole lot faster so an explanation or a link to a site would be helpful. I know there are many factors so another site would be fine.
View 9 Replies View RelatedComputer Boots And Runs Slow As Molasses
Feb 9, 2009I've got an old msi K7N2G-L board/computer and it's got an old WD1200JB installed and running xp. The problem is that it boots and runs slow as molasses, I'm talking like 10 mins to get it to the log in screen and opening apps takes a good 2-3mins before opening too. If I run a defrag on the drive, things temp speed back up to normal, but as soon as I reboot, it's slow again. If I run the defrag again, everything's cool and speeds go back to normal.So I'm guessing that there's some HD corruption on this drive (at least 5yrs old) and it keeps writing system files to the bad sections of this old HD when it's booting. I've run various fdisks, but none of them reveal any errors. (I should mention that I'm diligently proactive on Antivirus', firewall and Spyware practices, so that's definitely not an option relating to the old drive's slowness.) I've scanned with Avira, Nod32, Kaspersky, Trojansuperantispyware, and checked hijack this entries, there's nothing detected or unusual. Of course, I don't have all of these installed at once.I decided to try and swap the drive out and reinstall xp on this system using a newer WD3200 drive (that I use as a storage drive on one of my other computers.) I run the xp installer, successfully quick format the 3200 partition to NTFS, and everything proceeds fine and fast(keep in mind the 3200 drive was used to store data on my newer comp and was already formatted to ntfs.) Unfortunately, after it successfully finishes the initial install, it gives me the 15 second reboot warning. Okay, I let it reboot, but instead of continuing the install after the reboot, the system hangs on "Verifying DMI Pool Data" and that's it. Nothing happens and I am unable to finish the installation. I tried this like 10 times with 2 different XP home's and I keep getting the same problem. When I go into Bios, the drive is recognized as a 3200/automatic settings? I can't see why xp installs fine on the old WD1200, but not on the WD3200.
Computer Boots Very Slow / Loads Websites Slowly?
Jan 8, 2005My computer boots slowly, loads websites slowly and goes slowly from page to page.If Flrman (or any moderator of the sight) solves this, I will be happy to make a donation to keep this site going.Lastly, how do I get to personal profile to log specs into my sig? Can't find link.
View 14 Replies View RelatedComputer Boots Really Slow / Checked For Virus Infection?
Mar 19, 2007I'm trying to figure out what's wrong with my parents' PC. They have WinXP, 512MB RAM, and a 1.2 GHz cpu. They've had a problem wth spyware in the past and have had it cleaned up, but it still boots up extremely slow. Usually it's around ten minutes or so until you can finally do anything on it, and even then, applications seem to take a while to start up and run slow after they do. Is there something I can do to see what's the matter with it?
View 9 Replies View RelatedComputer Boots Extremely Slow - Virtual Memory Warning Pops Up
May 10, 2007I have a laptop that is booting extremely slow. When you logon to windows it literally takes about 20 minutes to get to the desktop and have the icons show up...but before that happens a Virtual Memory Warning pops up as well.
I have run virus scan, spyware scan
USB On Motherboard
Nov 29, 2007One of my computers has had an MSI motherboard just put into it, but the USB ports are not hooked to it. How do I get them connected?
View 7 Replies View RelatedMotherboard?
Jul 27, 2008I'm looking to buy a new motherboard for my computer but i dont know what i need to look for.
View 8 Replies View RelatedPc Won't Cut On - Hooked To Motherboard
Dec 22, 2005My pc was running just fine but when cut off it wouldonly cut back on when it wanted to couple hours couple days It got to where I didn't cut it off.. justrestarted it otherwise it worked great well lightsblinked a month ago and I haven't been able to get itto come back on since.... but the little light inside is on There is no noise whatsoeverjust kinda like it is dead I took the switch off and took it to two places to try tobuy another and they said those things never go badit had to be the part it was hooked to on the motherboard. My question is can they fix this without having to replace
the motherboard?
Right Driver For Motherboard
Aug 30, 2005My friend has recently bought a package PC, and the included motherboard drivers are... well, rubbish. I'm trying to find the right drivers for it, but the SiS website is useless, nevermind the Foxconn website. The motherboard is:Foxconn 655A01-FX-6LRS, Chipset (AFAIK): 655FX 964. I'm only used to nForce drivers (a single download), and this is just painful by comparison!I've already made 2 failed attempts to install the drivers, with no success. Which drivers do I need? At the minimum just the sound would be ok - he doesn't need the onboard graphics.
View 6 Replies View RelatedBeeping From Motherboard
May 8, 2010My computer beeps, when i have more programs running or playing games.The beeping is from the motherboard.Checked the internet and nothing worked reinstalled windows etc.Its getting annoying after a while.If there are options to repair it without replacing parts cuz recently i added 1000 ram a 7300 gt and a 2.80 ghz processor.The beeping its since the end of the last year.
View 14 Replies View RelatedEarly Signs Of A Motherboard Going Bad?
Aug 15, 2005What are the early signs of a Motherboard going bad?
If it is the motherboard (Am I correct in assuming that I will need to shell out $200 or more for a full xp sp2 retail).
Motherboard Without Reinstall - BSOD
Dec 10, 2008I recently got a new motherboard (GIGABYTE GA-81915P-MF). I was on an AGP board and I upgraded so I could get a newer graphics card. I installed the new motherboard (without uninstalling Windows XP Pro) and I get BSOD. I have tried reinstalling XP PRO, booted from disc. It would work for a while until it froze, and then BSOD again. I have put in new hard drives and it still won't work. I get various BSOD's everytime. I'm not overclocking, my cpu chip is perfectly compatible and I have 2GB RAM so it can't be memory.
View 1 Replies View RelatedNew Motherboard And Old HDD / Fresh Install?
Feb 22, 2010I'll buy a new motherboard with video card, cpu and memory but I will keep the old HDD. My old mobo is burnt so I can't boot the PC. I want to do a fresh install on C: but I have some data that I need. I have a few ideas but I don't know if they'll work.
1)Can I use Windows XP Live USB edition to boot with the new mobo, copy the data from C: to another partition and then do a clean Windows install(well, only the C: partition)?
2)What if I do a Windows Repair Install, copy the data from C: to another drive and then do a clean install?(I don't think this is a good option because the user settings and program files will be deleted and I want to keep them so I will know what apps will I have to install.
UPgrading To From 2000 On New Motherboard
Feb 26, 2007I just ordered a new mobo and will be upgrading to XP from 2000, which is currently installed on the hard drive I'll be using. I know it is always best to do a clean install with a new mobo but by doing the upgrade to XP will I avoid the problems of putting an old OS on a new mobo?
View 7 Replies View RelatedGraphics Card - Associated With Motherboard
Aug 1, 2007Will any graphcis card work with every motherboard? Because my graphics card is getting old and i want to get a better one. So are their specific graphics cards you can use for your motherboard or can any work?
View 7 Replies View RelatedMotherboard Swap On System
Aug 31, 2005My main XP Pro machine failed last night, with symptomology consistent with an actual failure of the motherboard. I'm going to try and attack it methodically tonight, but realistically I think the board will be "pining for the fjords.".I would like to take the primary disk from that machine, and cable it into the
old backup desktop machine in place of that machine's primary hard drive while I figure out what to do. That way I won't have to spend major amounts of time getting the Outlook .pst file moved and configured, not to mention all the other relatively important stuff sitting on that main machine.When I've done that in the past, that has always required a reinstall of Windows because the motherboards are totally different architectures and obviously take a different set of drivers and dlls and what have you.But I have a hunch this is not necessary if one knows the right tricks or perhaps how to run the mysterious Repair console.
Can anyone talk me through what I need to do in order to stick a hard drive with a good, running XP Pro installation onto a foreign machine? A second question: I run a small network at home cable modem into SMC .Barricade 4 port hub. The failing machine connects to the hub, as does a wireless router. I've found that when my primary machine is turned off (or in the case of this failure, is dead) that none of my networking works wired or wireless. I had to cable the backup desktop machine directly into the cable modem in order to have any connectivity. Just wired into the hub it waits forever for an IP address. I just don't understand what the main machine has to do with the networking process thought that was the job of the hub.
Motherboard Network Card
Mar 17, 2006I have an ethernet port that is physically connected to my motherboard. For some reason, when I formatted my main drive, and re-installed Windows XP, it will not detect it no matter what I do. I tried searching for new hardware through Windows as well, but nothing seems to be working. Luckily, I have an ethernet card laying around that I wasn't using, so that's how I'm connecting to the internet right now. A little bit about my system: I am connected to a Linksys WRT4G router, which is connected to my cable modem. When I plugged in the ethernet card that I had laying around, it found it right away and is working fine. I'm just that kind of person that feels if it isn't working how it's supposed to work I get all cranky. My type of motherboard is listed in my sig.
View 5 Replies View RelatedNew Motherboard Exisiting Drive
Feb 8, 2005I am having problems getting my XP Home O.S. to boot on new motherboard. I have run Windows startup disk and repair but still nothing. The drive is being detected in BIOS and hangs at start up. I am trying to not lose the data.Do I need to add partition or Flash Bios or something? Replace old BIOS with new BIOS via slave drive on another computer?
View 13 Replies View RelatedProduct Activation With A New Motherboard
Aug 3, 2005I would like to upgrade the motherboard in my computer, but I am worried that if I do this, Windows XP will not allow me to use the computer unless it is re-activated.Is this what would happen if I upgraded the board?
View 8 Replies View RelatedNew Mobo - Replace Motherboard
Jun 21, 2005Can I replace my motherboard, cpu & memory and expect my existing Windows XP installation to boot up? I realise there may be an issue with XP detectingtoo many hardware changes and insisting on being reregistered, but is that likely to be the only thing?
View 10 Replies View RelatedNo Internet After Change Motherboard
Apr 1, 2010i had changed the mb for my computer that join to the domain , and used the dhcp server everything was fine just the internet not working.
View 4 Replies View RelatedNew GA-965P-DQ6 Motherboard But DVD-RW Rom Cannot Boot
Mar 11, 2007I recently replaced my motherboard with a New GA-965P-DQ6 motherboard,and a Core 2 Extreme QX6700. it has 1 IDE, 1 FDD controller and 6 SATA slots. i am using a 650 PSU from Antec and a Big Typhoon cooler. From preparation to reboot into Windows XP i was told to reboot from the Windows XP Home edition install CD. I hooked up my gigabyte DVD-RW as master and my IDE Western Digital 80g 7200rpm as slave, to the only IDE slot - also changed the pin setting behind the drives. then when i turned the PC on, i went into BIOS setup and set it to boot from CDROM first (there is only 1 selection for optical drive). However, for some reason, the startup just couldnt recognize the DVD-RW and couldnt boot from it. Can someone please help as i am stressed and befuddled (tried switching master and slave but it didnt work)
View 14 Replies View RelatedUpgraded Motherboard OS Now Not Working
Sep 9, 2009I've recently installed a ecs 7050m-m (v2.00) with a phenom x3 8450 processor. It boots all the way to the option (f8) screen but no matter which option i pick it just reboots rather than loading windows. I've tried just safe mode but it only gets as far as btkernel then resets. Any ideas why this might be? was working fine with previous board? Is it because I didn't install the new board drivers before fitting? is there any way to fix it?
View 9 Replies View RelatedWay To Install New Motherboard Without Reinstalling XP
Aug 5, 2005is there any way to install a new motherboard without reinstalling xp all over again?
View 6 Replies View RelatedNeed Vga Driver For Mercury Motherboard Pvm7
Aug 26, 2010I need vga drivers for mercury motherboard pvm7.
View 1 Replies View RelatedInstalling XP On New Computer With Changed Motherboard?
Jun 12, 2005I was just curious as to how I go about installing Windows XP onto a basically new computer. Reason being, my motherboard was recently fried, so I had it replaced, but I have to reinstall windows myself.Now when I turn on the computer with the monitor in and all, it just flashes a screen with blue boxes, and never gets to anywhere. Is this a problem, or am I just not doing the correct way of going about a fresh installation like this?
View 4 Replies View RelatedNew Motherboard / Fresh Install Onto New Folder Or New HD?
Sep 24, 2008My P5RD2-VM Ethernet port fried for some reason, so I purchased another Asus P5K Deluxe w/wifi. Also, it was taking at least 10 minutes to boot my old system, probably due to junk collected over time on my system. My question is Should I do a fresh XP install on a new hard drive (I don't need the space) or can I fresh install onto a new folder on my existing boot drive? Can I use MS File Settings & Transfer Wizard to push everything over to the new boot folder? Or am I creating more work than necessary? Is there a better way to change motherboards and do a fresh install with existing equipment?
View 3 Replies View RelatedHDD Or Motherboard / Computer Occasionally Freezes
Nov 15, 2008Since a few months after i put my system together I have been having an annoying problem. I have 2 hard drives, a main one and one for storage. When i boot the computer it will occasionally freeze when the bios gets to checking the storage drive. I can usually move the plug on the motherboard to a different port and it will work. But lately it hasn't worked. I had to unplug the drive so the computer would boot. It has been happening more and more until now, when something just quit. ASUS P5RD2-VM Motherboard, the drive that has been giving me trouble is 320 GB Seagate Barracuda. It is the only SATA i have that's why i thought the MB's SATA ports could be bad? Any thoughts?
View 1 Replies View RelatedSplash Screen Saying That The Motherboard Is Optimised?
Apr 24, 2005Today, I tried to start up my XP computer; it gets to a splash screen saying that the motherboard is optimised for the Intel-P4 combination (which always pops up after POST and before the system boots up) and it just stopped. Rebooting encounters the same problem.I can't boot from floppy, CD, or DVD drives, and cannot get to the BIOS setup (hitting the appropriate key just gives me a blinking cursor on a black screen with which I can't type).There is obviously something seriously wrong, but it's beyond my very limited skills.
View 8 Replies View Related