I recently got a new Dell 3000. Boot takes forever, longer than my old computer. and sometime when i click on programs there's like a 30 pause before something happens. I even tried doing tweaks that i read about.
View 2 RepliesI have a brand new comp. w/XP MCE the boot times and shut down times are way too slow. Mine boots slower than the P4 3Ghz at my school. (30 seconds to a minute after I press power)My specs:E6600 WD 7200 320Gb 1 Gb DDR2 667 (will get another gig around April)ECS P965T-A.I know it should boot a whole lot faster so an explanation or a link to a site would be helpful. I know there are many factors so another site would be fine.
View 9 Replies View RelatedI have a Foxconn motherboard and it boots really slow when its gets verifying dmi data pool does anyone have any suggestions on how I can speed up my system?
View 1 Replies View RelatedI found some windows xp tweaks that supposedly speed up xp on the following link, the ones I am referring to are the stickied threads. I think the Master Tutorial one is ok, but I am unsure about 10 ways to speed up xp.This is because I found this site (and also because the poster is a 13 year old, although many older people inlcuding admin and mods have posted and have not said anything about them being myths):So, is this second site reliable and correct? I have used CCleaner to do something with the prefetch, so should I use the download on this site?
I've got an old msi K7N2G-L board/computer and it's got an old WD1200JB installed and running xp. The problem is that it boots and runs slow as molasses, I'm talking like 10 mins to get it to the log in screen and opening apps takes a good 2-3mins before opening too. If I run a defrag on the drive, things temp speed back up to normal, but as soon as I reboot, it's slow again. If I run the defrag again, everything's cool and speeds go back to normal.So I'm guessing that there's some HD corruption on this drive (at least 5yrs old) and it keeps writing system files to the bad sections of this old HD when it's booting. I've run various fdisks, but none of them reveal any errors. (I should mention that I'm diligently proactive on Antivirus', firewall and Spyware practices, so that's definitely not an option relating to the old drive's slowness.) I've scanned with Avira, Nod32, Kaspersky, Trojansuperantispyware, and checked hijack this entries, there's nothing detected or unusual. Of course, I don't have all of these installed at once.I decided to try and swap the drive out and reinstall xp on this system using a newer WD3200 drive (that I use as a storage drive on one of my other computers.) I run the xp installer, successfully quick format the 3200 partition to NTFS, and everything proceeds fine and fast(keep in mind the 3200 drive was used to store data on my newer comp and was already formatted to ntfs.) Unfortunately, after it successfully finishes the initial install, it gives me the 15 second reboot warning. Okay, I let it reboot, but instead of continuing the install after the reboot, the system hangs on "Verifying DMI Pool Data" and that's it. Nothing happens and I am unable to finish the installation. I tried this like 10 times with 2 different XP home's and I keep getting the same problem. When I go into Bios, the drive is recognized as a 3200/automatic settings? I can't see why xp installs fine on the old WD1200, but not on the WD3200.
My computer boots slowly, loads websites slowly and goes slowly from page to page.If Flrman (or any moderator of the sight) solves this, I will be happy to make a donation to keep this site going.Lastly, how do I get to personal profile to log specs into my sig? Can't find link.
View 14 Replies View RelatedI'm trying to figure out what's wrong with my parents' PC. They have WinXP, 512MB RAM, and a 1.2 GHz cpu. They've had a problem wth spyware in the past and have had it cleaned up, but it still boots up extremely slow. Usually it's around ten minutes or so until you can finally do anything on it, and even then, applications seem to take a while to start up and run slow after they do. Is there something I can do to see what's the matter with it?
View 9 Replies View Relatedwhat kind of tweaks can on do on a PC to make it boot up and shut down faster?
View 1 Replies View RelatedI have a laptop that is booting extremely slow. When you logon to windows it literally takes about 20 minutes to get to the desktop and have the icons show up...but before that happens a Virtual Memory Warning pops up as well.
I have run virus scan, spyware scan
When I turn on my PC it goes to boot up then automatically shuts itself off.
View 2 Replies View RelatedWhen I first turn on my computer the monitor remains blank and the computer just flashes the CD & DVD lights and I think the HD light is also on but that's it. I tried to press the reset button but nothing happens. If I turn off my power strip and then turn it back on and turn on the computer it boots ok. What is going bad on my machine, the HD, power supply, or could it be the mother board?
View 1 Replies View RelatedI turn on my pc and it boots as normal and goes to a screen where I have my users shown. Once I click on any of them it starts to sign on but straightaway changes to logging off and returns to the 3 profile screen.
I can get into my desktop if I go through safe mode though
Everytime that i have such kind of problems above when i try to boot my PC it doesn't boot (Means there's nothing comes up on the Monitor with flashing green light, HDD just run for a while then stop, and there's some wierd noise comes out of my Speakers as well it's like chinese or sth, wierd huh?
With that happens if i just leave my PC for a couple of days and try to boot it again, it boots up but somehow it cannot go into the OS and when i try the Safe Mode, it just show me alot of lines and continous beeping.
Her computer went into hibernation/sleepmode/standby , and we don't know how to get it back out of whichever one it's using. Nothing boots up on the computer when she reboots and the monitor light doesn't come on.
View 7 Replies View RelatedI need my PC secured but now it boots up without prompting me for a password.I running XP media center addition 2005.I have not knowingly made any changes to drop my password prompt and I've jump through too many hoops to reset it than should be listed here.
View 6 Replies View RelatedI've had a problem with my computer; in the past, almost every time I turned off the computer and rebooted, I would have to enter safe mode and then switch to regular mode, so I generally kept the computer on. After a longer than normal power outage, my computer doesn't reboot anymore. When I push the power button, it begins to boot and then shuts down. The computer in question has an amd 1,1 ghz athlon, 1 agp video card, 1 pci dual monitor video card (I run 3 monitors), a dvd drive, a cd-rw drive, a 3.5" floppy drive, a soundblaster card, 56k modem, 40 gig hd and an ethernet card for dsl.I'm running xp home edition with sp2. I tried unplugging various cards and drives, but it still will not boot.
View 2 Replies View Relatedinstalled an NIC card into my system earlier tonight as i want to be connected via ethernet, so put the card in the pci slot, booted up the pc. beeps once
no display what so ever and system hangs. tried another monitor, same problem.cleaned some dust from my motherboard and ram while putting the card in.have i messed up the RAM or mainboard in the process??
I'm having this problem with windows xp pro fresh install onto sataHD. Pressed F6 and installed sata drivers for the mobo etc. Now i hastento add that i have tried this 3 times now, set up runs smoothly windowsinstalls however when i have finished windows will only boot up withthe CD in the CDROM. Been into Bios and changed boot sequence but stillif no CD it just gets to boot from cd in the boot up screen and stops,put the disk in and windows boots straight up and away we go.
View 1 Replies View RelatedFresh format and install onto a 320gb SATA drive. Windows XP SP2.BIOS recognizes the drive.Unless the CD-ROM is ahead of the Hard Drive in the BIOS boot settings, and the Windows XP SP2 install disc is in the drive, the system will not boot.The message displayed is along the lines of "Disk boot error. Please insert a system disk and press enter."If the CD-ROM is moved back or removed from the boot order, this result also occurs.
If the install disc is in the drive, and the BIOS is instructed to look for a CD-ROM boot before a Hard Drive boot, a prompt is displayed along the lines of "Press any key to boot from CD." If no key is pressed, windows XP boots normally. Formating, reinstalling XP, messing with BIOS boot order, confirmed HD reads correctly in BIOS, with and without CDs in drive, repairing master boot record, adding a boot delay in BIOS.
ASUS laptop P3, 386MB RAM; XP2 - after scrubbing the drive of spyware and a virus - there was still one remaining - worm/spybot which included these 3 files: explore.exe, svshost.exe and windowsupdate.exe all of which are bogus files. I deleted these manually but did not find any registry entries (run once) that typically is associated with one of these files. Everything looked great until I rebooted because then XP starts, right after the logo screen things go black and the machine reboots forcing you to go to safe mode. You can go to safe mode once then reboot and come up into standard mode ok. Next time you reboot the reboot thing happens and you are stuck in this loop.
View 4 Replies View RelatedMy PC is around 6 years old, maybe older, and for the last couple of months, mostly during the night (which to be honest scares the hell out of me), it will turn on randomly. Sometimes it's when I move the mouse, which I know had something to do with a setting in the BIOS, but sometimes it's for no reason at all. It just...boots. Sometimes straight after I turn it back off. I've had to unplug it at night.I always shut it down properly - no standby or hibernation.
View 3 Replies View RelatedOk so I just fixed a computer and reinstalled the Operating System. I booted it once an installed all the drivers again then restart it. Upon doing so it failed to boot the operating system. I rebooted it again and said start Windows in safe mode. This results in the Windows XP loading screen appearing but when it goes away the whole system restarts. The same thing happens no matter what I select on the "Windows did not start up last time" screen.
View 1 Replies View RelatedI'm getting the following information when I boot up my computer.The system has recovered from a serious error.Here is what happens, I boot and enter my log in password and hit enter. The system then boots again and I have to put in my password and the it loads windows. The system boots a little slower than in the past and then this message comes up saying. "The system has recovered from a serious error"
View 14 Replies View Relatedi have a buddies computer here...when it boots up it goes to the xp screenthen goes to the blue screen saying it stopped so as not to damage windows.....i tried reinstall ...repair install even tried to put in new hard drive and done a clean install from a raw disk!!it would start once or twice then try to start again and get this blue screen again!!i took out everything hardware wise and it still happens
View 3 Replies View RelatedI have just reinstalled WinXP to try to get rid of this problem but it still persists. Basically, my computer is booting itself up from a powered off state but only when the phone line is connected to it (I have dial up internet access). If the phone line is not connected to it, the PC stays off. (Note the PC isn't dialling out - at least i don't think it is). I guess the easy answer is just to remember to unplug the phone line
View 6 Replies View RelatedI wonder how to change the way my two systems boots up. When I start my
desktop (with Win XP), it will show the the "Welcome" screen and wait for me
to point to my user name and click on it before it finished and display the
desktop. When I start my laptop (with Win XP), it will show the "Welcome"
screen and finish with the desktop without asking mew to click on "my" user
name. Who do I make my desktop stop asking me to click on "my" user name and
go straight into the desktop screen?
then flashes a screen too fast to read then reboots. the original system had boot issues after I used partition software to move to a bigger drive. I messes it up more using "r"repair console to replace mbr. xp setup disk doesn't see the system so it doesn't offer the repair option only the install one. If I slave it to another master WD hard drive with xp and assign it a drive letter I can see the the total contents so it's still all there just can't boot in
View 9 Replies View RelatedBefore this problem came about, I fixed the Windows error ""Windows XP could not start because the following file is missing or corrupt:" using Windows XP Recovery Console.I cannot anymore access the Recovery Console since it already requires the administrator password which is I think one of the bugs of older Windows XP versions. I cannot upgrade to Service Pack 2 since I cannot access Windows.I really need to access the files in this computer. Reformat is not an option.
View 14 Replies View RelatedI can't get WinXP to boot in normal everyday run of the mill windows.it'll start in safe mode/s.m.with networking/etc etc.When it goes to start it'll get to point and then "blue screen of death" will appear for a split second then it'll reboot.i had this problem previously and fixed it(virus!) but i have run everything i can think of Norton/Ad-Aware/etc etc and everything comes up clean.I've checked a few things out from reading other posts(i.e. msconfig stuff) but nothing seems to work.
View 13 Replies View RelatedI have 3 hard disks with multiple boot The C drive died on the first disk which uses 98 - I don't use it as an os Disk 2 holds a couple of XP's in different partitions - I use the D drive XP all the time Disk 3 has one os and partitions By installing these os, I was confident that in case of failure I could reboot to another - Huh ! Of course it always looks for boot.ini on the c drive ......I have replaced the C drive and am trying to install XP pro from a cd. It gets so far then when it restarts/reboots the whole damn installation starts from scratch again
View 9 Replies View RelatedSystem boots fine to XP PRO. When I try and access files on C: drive ( OS is on F: drive), I get an error that the HARD DRIVE IS NOT FORMATED? I cannot access any file on C: drive at all. I tried running DEFRAG on this drive and get an error about 2 files that non readable, etc. How can I access the drive to delete the files, I tried SAFE MODE but same problem. Norton shows no virus?
View 14 Replies View Related