Files Wouldn't Transfer Over During Install - Freeze System
Jul 22, 2005
I took it home and attempted to install windows xp on it and in the process things got messed up. I started up the computer and logged in. Once in, I inserted the Windows XP install so as to upgrade it and the process started out fine. Well it got to the point where it said it needed to restart in order to contiinue with the process, which it did. It restarted and began copying files, and it tossed out a few error messages. They were: could not copy file: spra0410.dll & spra0411.dll I tried to write them all down but I couldn't catch the all. I do know however there were about six files, all similar to the ones above, that didn't copy. I'm not too sure what to do at this point because now the computer won't go to windows at all. It goes through the start up screen all the way to the point where it says "press any key to continue", but then just kind of freezes and won't go any further. I've tried pressing a button to go forward, also tried to boot in safe mode whic none of the F Keys or Del will take me to. I tried changing the Bios to Boot from CD first using the same XP CD. I'm not sure what else I can do to get this thing to open windows, even in safe mode, or system restore. Sorry for the novel, just trying to explain in depth.
View 13 Replies
ADVERTISEMENT
Dec 28, 2006
I had bought several hard drives as is, hoping one of them would work. thought I had one, but turned out I couldn't install XP onto the disk, wouldn't copy any files. so I pretty much cut my loss on the drives and removed it the bad one from pc. now I get 2 options when booting windows. my original xp install, and the 2nd install that still needs to complete, how can I stop it from wanting to install xp again from the boot file and keep the original settings as they were?
View 6 Replies
View Related
Feb 3, 2008
I bought a new laptop with Windows XP in it, I wanted to transfer some files from my Desktop PC which has Vista to my laptop with XP, I bought a Belkin USB Data Transfer Cable to transfer files with help of Windows Easy Transfer but when I installed the software provided with it, it seemed that I can only transfer files from XP to Vista.
View 1 Replies
View Related
Jun 21, 2005
I’m having problems with my operating system. I want to install a fresh copy
of it. Can you tell me or show me step by step documentation as to how to
partition my drive (or refer me to documentation as to how to do so), install
a clean copy of WXP from my Dell OEM Windows XP SP1a CD into the new, empty
partition, update everything necessary on it (note, again, I received the WXP
SP2 CD from Microsoft by mail a few days ago), transfer any files from my current installed O.S. copy into this newly installed copy that I want to install, and then delete this current (then old, once I do this) copy of my O.S.? Are there any Microsoft documents about this? Would this be better than just reinstalling the O.S. over the one I currently have in my computer?
View 24 Replies
View Related
Apr 15, 2008
Out of all these files, I would like to know what wouldn't harm my computer if I deleted, since they're all random stuff anyway
View 4 Replies
View Related
Nov 12, 2006
I hope someone out there can help me because i am well and truly stumped with this problem. I ordered a brand new pc - Ath 64 X2 4600+ CPU, 1 GB RAM, 400GB SATA, 256MB 7900GT, 19" TFT, 16x DVDRW-DL, Running Mcafee Antivirus / Ad-aware, I originally had problems when my Graphics card wouldn't work. I installed some older versions of the drivers and it was working okay. Then I had some problems with some dll files and i couldn't open Windows due to the system/config error at start up. I managed to repair that installation. THe next day, my PC would not boot and I could not repair it. I then found out, i had bad sectors on the Hard disk so i tried formatting it
View 9 Replies
View Related
Sep 30, 2009
I had my system running XP but it is now running Windows 7 and for the reason I backed my files up to a portable Hard Drive formatted as FAT32. Now when I try to use the Files And Settings Transfer Wizard it doesn't seem to recognize the files and says that they are not there.
View 2 Replies
View Related
Jan 18, 2008
I got a Gateway notebook with Vista. I got a router from Belkin. I was on a fairly new desktop with XP2. I followed all the instructions and got the notebook on the internet. Then when it came to setting up security, all went bad. The notebook wouldn't "take" the phrase I picked out. OK so I unplug everything and decide to send the router back. I go back on the desktop where there were 3 users (2 limited and me admin. It won't let me log in as admin. I tried on all 3 names anyway to no avail. Everytime I clicked on ANYTHING it said "error file cannot be found invalid path" something like that. System restore I couldn't even bother with because like I said, clicking on anything just gave me error messages.
View 14 Replies
View Related
May 15, 2006
I bought a new laptop and I need to transfer all of my important files to the new computer. The HD on my old laptop is ATA and my new one is SATA.
View 14 Replies
View Related
Aug 19, 2005
I installed a driver/USB File Transfer on two computers and connected the cable into its USB ports. I am not able to transfer files from older computer to a new one.
View 2 Replies
View Related
Aug 19, 2005
I installed a driver/USB File Transfer on two computers and connected the cable into its USB ports. I am not able to transfer files from older computer to a new one.
View 2 Replies
View Related
Apr 9, 2006
I want to remove some files from 'My Music' and store them on my new USB flash drive.
View 4 Replies
View Related
Jul 24, 2005
I have established a connection between two computers running Win XP pro. I want to perform file transfers.
View 2 Replies
View Related
Jul 22, 2005
I have some game giles i want to transfer from my laptop to my dell desktop. It is 3GB's worth, Any ideas on how to get the files there? Emailed would take too long. so i was thinking of sort of like. connecting the laptop to the dell but im not sure if thats possible.
View 7 Replies
View Related
Dec 28, 2007
I have two win XP laptops, and i need to transfer some files across. Is there a way to wirelessly transfer file between PCs, either with or without 3rd party software. I might have to just resort to USB, but it would be great if i could sort something that may take longer initially, but will overall save time.
View 6 Replies
View Related
Jan 9, 2007
This problem started up after the last format of my computer. I have the usual folders shared on my computer which consists of my shared docs, music, DOD/CS:S maps and games. During LAN parties (or any other time) nobody can get files off my computer. They are shared just fine, they can see the files, but when we try to transfer it says "Cannot copy *filename* - access is denied. make sure the disk is not full or right protected and that the file is not currently in use." The file transfer bar will go like it is transferring, but when it is done I get that message. It doesn't make sense. I have these two boxes checked under "sharing" in folder properties: "share this folder on the network" and "allow network users to change my files." All firewalls are off. This happens over 4 different routers. I have reconfigured the network many times.
The only thing I can think of that may have caused it is that I deleted the microsoft .net asp account that is installed with microsoft .net framework. would that do it? I haven't had the energy to re-install that yet. I deleted it so I wouldn't have to select an account on startup. Anyway, if you have any input I would appreciate it because this is annoying. Update: And I have just determined that I can listen so some songs on media player over the network, but I can never transfer them between computers.
View 14 Replies
View Related
Aug 3, 2005
How do I transfer a big amount of files from my PC and burn it on a laptop CD-RW?
View 7 Replies
View Related
Aug 21, 2005
I know there are some FTP programs available but what about having an ftp server available to go through? or am I not understanding process properly?
View 6 Replies
View Related
Sep 14, 2010
I saved some old CAD drawings using DOS commands onto a USB memory stick, to be able to transfer the CAD files onto another computer running Win XP Pro SP3. The old DOS based CAD files on the USB memory stick were not recognized by Windows Explorer. When the old HD connected via USB to the Win XP computer happily allows files to be transferred. The memory stick has lots of files on it saved under Win XP and most of it not recognized on the DOS machine, but none of the directories created or files saved on the memory stick from the DOS machine are recognized by the Win XP machine.
View 6 Replies
View Related
May 19, 2005
okay guys i joined the real computor race, i just got a compaq, 512mb pentium 4/ 2.0 ghtz processor, and winxp professional installed with 40gb hard drive. so now i need to know (step bystep) how to get all the stuff i want off my dinosaur, hp celeron, 64mb, 6gb hd, and win98se, onto my new computer.
View 2 Replies
View Related
Nov 9, 2008
I've learned now heavily about the Files and Settings Transfer Wizard. I've also learned about the USMT, which I've not yet used in practice, but learned the basics of in the .inf version. Studying that was how I was able to learn this deep into the Files and Settings Transfer Wizard. Basically, the two have similar, but not exactly the same configuration.Now here I'll post the configuration for the Files and Settings Transfer Wizard. I took what I found already there, and was adding features to it. I didn't create this from scratch, and it would've been silly to, as it's a configuration file.My issue is that whenever I'm saving settings, anytime I tell it to save something from HKEY_CURRENT_USER in the registry, it does not work. I was needing to know if anyone knows why, so I can correct it please.
View 2 Replies
View Related
Jul 1, 2005
I'm working on a computer running Win XP. We had previously installed a second, bigger hard drive, so she wouldnt lose any space on her c drive, which is only 9GB. Problem is, she's now down to about 147MB on the C drive, and we are afraid of a crash. Can I use the Files and Settings Transfer Wizard to move some of her programs to the bigger drive?? The new drive is 120 GB, and we want to just leave the operating system on the C drive, and move everything else. We have already run the disk cleanup wizard, emptied temp folders, and deleted unused programs (except for Quicken.it doesnt seem to want to uninstall.
View 13 Replies
View Related
Apr 16, 2007
I would like to transfer the data files off a CD onto my hard drive, then set the program that needs the data files on the CD to read from the files on the hard drive rather than the CD. My CD drive is getting a bit old, but I am unable at the present time to upgrade it.
View 3 Replies
View Related
Oct 15, 2007
I have a 120Gb HDD that is acting up. Random sputtering sounds and then reboots. I have another 120Gb empty HDD. Want to transfer all files, including Win2K Pro to the new drive.
I looked at some messages for hardware, but they are for Win98 and Me. Says problems with Win2K, etc. Are there any other programs other than xxcopy that will work with Win2K? I was familiar with Ghost, but only with Win98SE. Would there be a version of Ghost that would work now?
View 1 Replies
View Related
Sep 2, 2006
I bought a new gateway and I want to get all my old stuff off my old hard drive. I bought a USB hard drive converter for my old hard drive and plugged it in to the new computer and I can access my old hard drive and I want to do a File and setting transfer with the wizard.
View 2 Replies
View Related
Jul 17, 2005
I want to use the restore CD's on my laptop, win2000, but I'd like to save both data files and installed software and drivers. Is it possible if I can transfer to an external hard drive? Or, can I only save the data files? How can I save the software and drivers?
View 5 Replies
View Related
Aug 7, 2005
I have two eMachines both running Windows XP Home SP2 and would like to transfer some files from one to another. However, after I run Files and Settings Transfer Wizard on both computers, connect them with PC to PC serial cable and click AUTODETECT, both machine turn off.
View 1 Replies
View Related
Oct 17, 2007
I have two computers, on one computer there is a irrepairable version of windows, and I still had some files I wanted to save. So I bought a hard drive enclosure so I could transfer the files onto my laptop, the one I'm using right now. However I used to have a password for my account, and my files were marked private. Now when I try to go into those files, it says 'Access Denied' I was wondering if there was anyway to go around this obstacle, those files are needed.
View 5 Replies
View Related
Dec 6, 2009
Anytime I try to open up a .avi file my computers CPU boosts up to 100%. I have tried Neros showtime and windows media player and both do the same. I have the latest directx and have installed the Klite codec pack. I originally did not have the codec pack installed and it was causing the problem. Any ideas?
View 13 Replies
View Related
Jun 21, 2005
After install of XP SP2, desktop icons freeze and pc requires log off and log on to unfreeze. Anyone any ideas on this.
View 1 Replies
View Related
Oct 18, 2009
Recently, about a week ago, my PC froze so I had no choice but to manually shut it down. After I rebooted it, any files aside from program icons and windows explorer icons were gone (i.e folders, videos, pictures all gone).
I am no expert on how to recover these. I had some really important, and meaningful files from there
View 1 Replies
View Related
