Error Message When Right-Clicking D And E Drives
Apr 21, 2010
This is my first time here but boy do I need help! When I right click Play or double-click my D and/or E drives after inserting a cd or dvd, I get the message "This file does not have a program associated with it for performing this action. Create an association in the Folder Options control panel." I have tried several things already including running a thorough cleaning, fixes recommended on the Web including one here and NOTHING works. I cannot burn cds either. Hope someone can help me. I am pretty savvy at following the instructions, even if it includes going into the registry.
View 14 Replies
ADVERTISEMENT
Jan 30, 2009
For some reason on my XP machine, it recently started opening minesweeper when I try to click on a network or mapped drive (and won't open the mapped drive). I've tried dropping and reconnecting - and it's still doing it.
View 4 Replies
View Related
Feb 2, 2007
what i wish to do is reformat c: . But everything i click on a popup comes up saying something like this file program has no file assocation go to control panel etc....eg fdisk, c: prompt...seems like everything to do with windows.Is there anyway of getting the file assocation back. oh yeah when it starts there is a popup that comes up, with nothing in it just a few square boxes in the top left corner and of course i cant get into msconfig to see what is starting.
View 12 Replies
View Related
Jan 30, 2005
I am using win2k on ntfs file system. My two drives are unaccessable f: and g:when I boot my system. What can be the reason, after third boot all disk was unable to be accessed, when I tried to format my c: through win2k bootable cd. It was shown
c:
d:unformated disk
e:unformated disk
f:unformated disk
g:unformated disk
What is the reason?
View 7 Replies
View Related
May 28, 2006
Clicked on a MySpace page and got a popup immediately. My AVG said it detected a virus. I quaranteened it then deleted them, and ran Adaware and quaranttened those. I am still getting pop-up ads. I am running Windows XP. How can I uninstall this mess?
View 8 Replies
View Related
Dec 11, 2004
ok, after I unzip the program I click on the setup.exe and get this message: "C:WINDOWSSYSTEM32AUTOEXEC.NT. The system file is not suitable for runnung MS-DOS and Mircosoft Windows application. Choose 'Close' to terminate the application." I had this program before so I know it can be run on xp.
View 2 Replies
View Related
Aug 12, 2008
I'm running Windows XP SP 2 and I get an error message whenever i connect my blackberry curve to the computer. if the usb device is stopped, it will go away, but other than that it won't disappear after clicking cancel. if it helps, I installed the roxio media manager only yesterday, when the error first came up. Its name is Exception Process Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6b
View 2 Replies
View Related
Jul 21, 2005
When I open My Computer and right click on the C: drive to bring up drop-down menu, it always says that Explorer has encountered an error and needs to close.
View 12 Replies
View Related
Apr 11, 2006
Every time I switch on my machine and try to connect to the internet, I get a dialogue box: Web page is unavailable while offline. To view this page, click connect. When I click connect, I can view the page and don't get the error message again until I switch off the machine. Why does this happen?
View 6 Replies
View Related
Feb 2, 2006
clicking noises all the time even when im not near the computer like the clicking noises when u view webpages
View 2 Replies
View Related
Sep 16, 2005
Currently I have been this problem once this in a while. Whenever I one click, it does what double clicking do. It doesn't happen always, but it happens once in a while. Somebody told me its a bug in Windows where you clicked only once, but Windows think you have double clicked.
View 2 Replies
View Related
Apr 14, 2005
a message keeps popping up saying the following: Cannot load dialog. Error 623: The system could not find the phone book entry for this connection. All I can do is click the close button and it goes away and nothing else seems to happen, but it pops up again in a few minutes.
View 1 Replies
View Related
Sep 25, 2010
I have a Dell Inspirion laptop and have formated the HD and removed the partions. Have tried booting from a USB HD and have also tried another burned disk. No change will not install.
View 1 Replies
View Related
Jan 8, 2007
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this?
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose.
Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
View 9 Replies
View Related
Nov 22, 2008
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
View 7 Replies
View Related
Mar 25, 2007
When I'm trying to start up Windows XP Home Edition I receive an error box without an error message, I can just click YES or NO. Neither option let's me continue. When starting up in Safe Mode, everything works fine.
View 2 Replies
View Related
Jan 14, 2007
When I want to move something to, or download anything to My CD drives I cannot get past the message "please insert a disk into drive (which ever)". Neither drive will recognize that there is a empty disk in the drive. I've tried different media and various makes of CD's and DVD.'s. I can burn a disk in the Cd/DVD
drive using "Nero". And both drives will open if there is data, music, or pictures on the disk in either drive, but I cannot open a blank empty disk unless it is in conjunction with something I'm doing with Nero.
There are no yelow symbols in device manager. And I have uninstalled both IDE channels that the optical drive is on and on reboot win 2000 reinstalled them automatically. I have updated the firm ware for each drive. Replaced the USB cable for the external drive and before I reloaded the updated firm ware I uninstalled both drives and reinstalled with the updated firmware. My three malware/spyware
programs have been run as has both of my virus programs.
View 3 Replies
View Related
Aug 27, 2005
I have a set of USB ports on the front of my machine and another set on the back. My ports on the back work fine and if i plug in my 2 pen drives in it works OK. But if I plug them in the front I get the error
This device cannot start. (Code 10)
The ports on the front work OK with my digital camera and joystick and my pen drive works on every other machine that I have put it in.
View 3 Replies
View Related
Jan 24, 2009
The message could not be sent because the server rejected the sender's e-mail address. The sender's e-mail address was 'cih333@suddenlink.net'. Subject 'Batman!', Account: 'pop.suddenlink.net', Server: 'smtp.suddenlink.net', Protocol: SMTP, Server Response: '553 Authentication is required to send mail as <cih333@suddenlink.net>', Port: 25, Secure(SSL): No, Server Error: 553, Error Number: 0x800CCC78
View 2 Replies
View Related
Apr 2, 2009
I keep getting this error message when I boot. The entire message says, "windows explorer has encountered an error and needs to close." When I close the box, i lose my desktop, and can't run a bunch of programs, including the "run" option. I am able to run my browsers and get on the web. I did do a system restore, and it worked at first, but then on the next reboot, i got the error message again. Did another system restore, same thing.
View 17 Replies
View Related
Feb 23, 2006
I have a Gateway GT5032, Athlon X2 4200+ w/ 1GB RAM, 80GB (system) & 250GB HDs running WinXP MCE 2005. I was using the PC to open Nero VisionExpress while I was opening an edited DVR-MS (~1GB) movie when the movie became very choppy till it froze (Nero took a while to load as well). After waiting several minutes I end tasked the movie and continued to have a slow response time from the PC. It returned to normal speed, then I would try opening the movie (using Windows Media Player) and the movie was still choppy till it stalled. I eventually restarted the PC...I noticed that it took a LONG time to boot WinXP and would ''stall'' every 5 seconds for about 2 seconds. During bootup it reported that an error was in C:Windowssystem32Rasapi32.dll, but it did boot into Windows and all.
I rebooted in hopes of fixing the problem, but then the PC had trouble recognizing drives. After being shut off for about 10 minutes, the BIOS recognizes all drives again but reports an MBR error on boot up and will not even load Windows. I'm assuming that MBR is the Master Boot Record...and that scares me a lot. I am wandering if there is any easy way to repair this problem. And also if the MBR is indeed damaged, could it also have harmed my other files on the HD (such as Rasapi32.dll)? What is the function of Rasapi32.dll. I don't suspect a virus as I was not running any suspicious files lately.
View 6 Replies
View Related
Sep 1, 2007
Everything has been fine with my 3 and a half year old ADVENT PC, and I've been successful in upgrading parts such as DVD Drives, adding extra RAM and installing my new graphics card.However, in the past few days, when I boot up my PC, it stops at what I believe the DOS screen (part with BOOT FROM CD etc.) and will say A Disk Read Error Occurred. Press Ctrl+Alt+Delete to restart. This happens 2/3 of the times I turn on the PC.Also, if I do press Ctrl+Alt+Delete and the PC restart, it is normally successful, and will boot up Windows perfectly. Just this morning, it gave me the error, and with 2 Ctrl+Alt+Delete restarts, it's working perfectly, hence I can type this.
View 5 Replies
View Related
Apr 3, 2010
this has been bothering me for weeks and not a single thing I've tried has solved it. It's really a problem now, because I can't just not back my stuff up forever, I have to get this sorted out.I have a PC that I keep all my stuff on, run uTorrent on, my media center application, etc. It's got 8 HDDs. Half for storage, half for backup. 5TB overall (well less...but you know). I have an application that runs once a day to sync the drives with their counterparts. Everything was fine, until I got a new motherboard and CPU for the system.Now.....whenever I run my backups, this message will appear. Either very rapidly, or at some point during. The whole system will slow to a near halt (it can take 30 seconds for the mouse to register movement), and the only course of action is to turn the system off and on again. It's because of this Delayed Write Failed error (it pops up, sometimes immediately....and sometimes if you let the system keep running).
I've looked online for solutions. Some of them say to disable delayed write in the HDD properties. I've done that for most drives (the drives connected to the system via a PCI-E controller card have that tick box option greyed out. Nothing I've tried has made a blind bit of difference.
View 12 Replies
View Related
May 7, 2006
i have three hard drives : 1 Hitachi 250 GB Sata 2 on Nvidia Controller 2 Samsung 80 GB Sata in RAID O on Silicon Controller 1. the problem is when i boot into windows the LAN connection (two small monitors in the taskbar) takes atleast 10 minutes to show !! and theother problem is that until tht two monitors dnt appear i dnt get any reply frm right clicking any of the drives to see their properties and frm My Computer too, but as soon as the two small monitors come all the properties just pop up.
2. Sometimes suddenly in between Windows shows Write Delayed Failed Error only on the Raid Drives and i cnt access them afterwards,restarting solves the problem tho but jst for sumtime.
View 6 Replies
View Related
Apr 20, 2006
I have setup a wireless network between two computers in my office and have installed some software that will automatically backup folders on each of the two computers.It work by backing up certain folders on computer 1 to the hard disk on computer 2 and vice versa.I also have a program installed on both computers that uses the data on computer 1.simplify the process of locating the data on my network I have created virtual drives using the Map Network Drives function in Windows. However; if I start up my computer and open these programs - they can not find the drives, I have to open My Computer first and double click on the drives before the programs will read from them. I am guessing that for some reason Windows is not connecting to these drives, even though I have set them to "reconnect at logon".
View 1 Replies
View Related
Apr 5, 2005
Computer that has Windows XP and I've started getting these annoying error messages that "Internet Explorer has encountered a problem and needs to close", the box has a debug button or send error report. What kind of update do, The version of IE is 6.0.2900.2180.xpsp.
View 6 Replies
View Related
Jun 1, 2008
using windows xp media edition. when I click on things on my screen my computor sometimes works ok but sometimes doulbe clicks or triple clicks and sometimes clicks up to five times by itself I don't understand why this happens. Is it possible I have some type of virus that is causing this multi-clicking of the mouse when I only click once. I did a full system scan with Norton and nothing is found.
View 6 Replies
View Related
Dec 5, 2006
When I turn my pc and windows loads up an error message appears saying that windows service pack 2 setup has encountered an error and has to close. However when I close the error message it keeps popping up every 20 seconds or so. When I went to microsofts website that told me that service pack 2 was installed on my pc. I have ran a full viral scan using the latest version of Panda and have also ran Reg-cure to see if the problem was in the registry but the error message still keeps popping up.
View 1 Replies
View Related
Dec 27, 2007
I recently installed the program registery fix and i believe it has caused my Cd and DVD drives or the paths to these drives to be deleted from windows as they do not show up in my computer. I have tried the options in the following list but none of them have helped me, i'm really stuck but i can't fix the problem.
- I've tried deleting the upper and lower filters but they are not in the selected registery.
- I've tried a system restore but i can't go back to a previous point before the registery fix install.
- I've tried unplugging the leads and restaring but this didn't help.
- I've tried microsoft guided help but it couldn't find the upper and lower filters.
- i beleive they are still listed in my bios but don't know exactly what i'm looking for when in bios.
I don't know where to go from here, i also run alcohol 120% a virtual drive software and the registery fix has had no affected on these drives but i'm wondering if this maybe why the program registery fix deleted my actual drives becasue of the virtual drives and replaced the paths to my actual drives but i'm not sure it's just a guess. I've deleted the virtual drives and tried the steps above but i've had no luck.
View 14 Replies
View Related
Jun 26, 2010
My operating system is Windows XP Pro. As of yesterday all was fine, I even burned a DVD. Today "My Computer" isn't even showing my DVD/CD recorder, only showing Drive A: 3.5 Floppy. It started when I downloaded (I think) WindowsBlinds, just wanted to do some color changes. Well when I installed it, Norton came up with a Trojan. Norton Quarantined or deleted it and said no more further actions required. The install finished (windowblinds) and I tried a couple different skins and decided to uninstall it. Uninstalled with Revo Uninstaller
View 6 Replies
View Related
Sep 3, 2005
I'm getting an error message of exp.exe everytime I turn on my computer. It will load and then it will give me that error. Then, after about 2 minutes the computer will freeze.
View 14 Replies
View Related
