E Drive Not Accessible When Trying To Acess Through C Drive
Nov 4, 2006
I have windows XP HOME installed on the C drive of my laptop and Windows XP Pro installed on the E drive. Both E and C drives had password protections. Few weeks ago I removed the password protection for E drive. But now, when I try to access E drive through my C drive (by going to My Computer>E>Documents and Settings>Jake) it is showing a "access is denied" window. Why is this? (I am able to access the contents of my E drive if I boot up windows XP pro (because the XP pro is installed on the E drive
The motherboard in my old HP computer died and I have got 40 GB worth of data on the hard drive that is still working.I got a new XP computer and added the old hard drive as a slave, to get the data out, but apparently the old XP program is locking me out. How do I get around this block, so that I can get onto the old data, to save it, and get it ready to be reformatted, for use in another computer?
i have a dvd + - rw and it just stopped working the other day i was like whatever now i need it for a project for school and i cant get it to work can ne one help and i upgraded the ram a few weeks ago
I do not know what the fish happen to my PC.When i clicked on my drive,a message appears which states:"D: is not accessible.Incorrect function."I did not remove anything other than those unwanted applications.I thought I could restore my drive D when I run system restore.To my horror,system restore returns a message stating that "Changes made to drive(s)D: after this point cannot be reversed because the drive was either excluded from system Restore monitoring,or was turned off or removed".I really do not want to lose all my important data in that drive D.Pls can anyone provide your expert advice.
Domain has shared drive P: (Public)User can access drive via //servername/public or servername.domain.org/public and work out of the files there exactly as intended, with full access. She's actually made a shortcut on the desktop for it.Try mapping the drive however, and it say Access is Denied every time. Try to disconnect the drive and it tells you the files are in use (because they are, but not through the map). So to reiterate those two methods of network access I listed above have both been tried.
I have a hard disk (non-booting) that was formatted by windows 98. I put a new drive in the system and put xp pro on it. The drives show up in device manager, and on my computer, but when I attempt to access the drive, it says "unformatted drive, do you want to format". I hit no,because I don't want to lose the info on it.
When i plug in my pen drive into my computer, i open My computer where i can see it, but when i try to open it, a message pops up saying "insert a disk in unit H:" or something like this. This message usually appears when there is no disk in that drive and you try to open it. but the pen drive is plugged in! not even mac os read the pen drive.
i just formatted my comp d prblemis that i have a drive which has a few movies and songs in it and in checking memory usage of that driive it shoewed it had arnd 10 gb of things in it ie d songs and the movies.the problem is that when i click n the movie or the song it shows that it is not accesible access is denied
I am running xp pro. I have been having problems installing a scanner but that is for another time. Currnetly I have an error message that reads D:is not accessible. Incorrect funtion. This has rendered that dive useless so I cannot load or play any discs. How do I get this drive working again?
I just downloaded this program a while ago because I keep getting an error, E:drive not accessible; incorrect function. I thought the scan would fix errors. What can I do to fix it. Also same message from drive F. Trying to download pictures to a CD
I receive the following message in Device Manager under the floppy drive: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39). I have attempted to remove the drive and let XP recognize it and I have also tried uninstall and install of the driver both without success. I found similar hits to my problem through a google search and one had a solution for a CD rom drive problem from this forum.
I was hit by the hurricane when it was a category 1 hurricane and lost power for several days. During this time I had my computer off. When power finally came back on I turned on my computer, but even though I didn't lose power again the phase went up and down. When I tried to turn my computer on again I got a blue screen, and then I started getting an error message when it tried to load windows 2000.
i have an external dvd-rw linked to my computer.upon putting in a dvdwith music folders on i cant open or explore the disk to see what is onthere.i get the above error message come up.any ideas on what could becausing the problems -- scott1690
Would someone please help me if possible,to resolve these problems and why these problem occurred.I've got blue page three times before these problems occurred.windows xp home sp3 1-right click on drive c and selecting check disk ,enter: check disk was unable to complete the disk check.2-type chkdsk c: x f in command prompt and restart...this message:the type of file system is raw.check disk is not available for raw drives. 3-disk management shows drive c healthy and with the FAT32 file system structure. 4-type chkdsk c: in command prompt...enter:the type of file system is FAT32....windows find errors in file system.
I have a 250GB Western Digital hard drive with a ~195GB partition formatted as FAT32. The partition is called "Documents" and has the letter C: assigned to it. The rest of the hard drive isn't formatted. The operating system (WinXP) is installed on a different hard drive.Since yesterday in My Computer or Explorer it's called "Local Disk C:" and whenever I click on it I get a box that says "The disk in drive C is not formatted. Do you want to format it now?". For two hours it came back and I backed up all the most important information but then the same problem came back again. I was able to see the contents of the partition through a few applications but not access it. My whole computer is working sluggish since this happened.
My friend's computer seized up in the middle of the boot. Tried recovery, but it isn't able to go forward. The hard drive seemed to be spinning tho, so chances were good we could recover the data. I removed the hard drive and copied everything to a back-up external drive using my own computer. Replaced the hard drive in the disabled computer. Question is how do I install Windows XP? The recovery files on the hard drive are not accessible, I assume, so we can't use those - right? We misplaced the disks that came with the computer, so I'm buying a new copy of Windows XP.
I have two laptops, a ThinkPad T30 and a Latitude C840 (they are both working with XP SP2, except the T30 doesn't have a screen). I'd like to move the T30's drive into the C840, but when I do this, the C840 will hang right after the BIOS screen (incl. the XP CD's Press a key to boot off the CD if I tell it to boot from the disc drive first). My first thought was to try Recovery Console from the XP CD. I can log into the install, and I've already tried fixmbring and fixbooting it. This doesn't help.
This leaves the option of the drivers not being right. I installed the C840 chipset drivers, nothing. I'd really rather not go on a wild goose chase trying to figure out what'll get things up and running
Today I noticed that what WAS my E drive is now called F and what was my F drive is now called G. I don't know how it happened, but it's wreaking havoc with Adobe Premiere because on all old projects I have to relocate all files on what were F that are now on G. It's also messing up my shortcuts.
I am try to two partition drive C and drive D in my computer but only one c or d instoling. i have 4000mb hardrive,please tell me how can i instol partition in my window xp professional.
I had to buy a new Hard drive and installed it into my computer.also have a slave drive that is much smaller. the slave drive has always been drive e: or drive d:. But for some reason after I re-installed windows and ran it, it now made my slave drive into drive c: and my master drive into drive e:! How do I switch the two? The slave master is set up properly in the BIOS. The large drive is the master and the small drive is the slave. But how do I assign the c:designation to the large drive and the e: designation to the small slave drive.
when i was installing a program called googlearth Norton recommend that i i block this program to the internet but now i fine this program need to connect to the internet.how to stop Norton fron blocking acess to the internet.
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
I use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
My office has a number of mapped network drives for each user which, unfortunately, start at drive letter F.Each time a USB device is used on the computer it is also automatically assigned the drive letter F (presuming that C is hard disk and D and E are CD/DVD drives). This has to be manually changed from within Disk Management.Apparently this is as a result of physical drives taking precedent over the mapped network drives.Is there any workaround for this other than moving the mapped drive letters further along in the alphabet? - this is not really a feasible solution at this time.
A little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
A friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
XPpro with two HDs, CDr/w and DVDr/w.(D AND (E are (were?) a 20G drive which I partitioned over a year ago. This morning I came across a 4G drive in an old box. (really). Being a curious type I pulled the power and ribbon leads from the DVD and plugged them into the 4G HD, after setting the jumper to slave.Then switched on. A dos line appeared saying 'automatically configuring an F: drive' After which Windows appeared to boot up normally. Except that 'My Computer' showed no (D The 4G (F drive showed as not formated. So... I removed the 4G and replaced the leads back to the DVD. My Computer' shows 3.5 floppy Local Disk(C FRSTHAFOLD(D 9G abt Notice NO (E
Not only that but my D drive is missing lots of files and folders wont open. It seems that the partitioning has been forgotten! I have checked what bios settings there are (not many on Compaq 5000) And the bios sees my main Crive and only one 20G disk I have a bad feeling about this Is there any way to get things back to normal?
This is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
I had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
