Moved Hard Drive And Cannot Boot - Accessible From Recovery Console
Dec 23, 2006
I have two laptops, a ThinkPad T30 and a Latitude C840 (they are both working with XP SP2, except the T30 doesn't have a screen). I'd like to move the T30's drive into the C840, but when I do this, the C840 will hang right after the BIOS screen (incl. the XP CD's Press a key to boot off the CD if I tell it to boot from the disc drive first). My first thought was to try Recovery Console from the XP CD. I can log into the install, and I've already tried fixmbring and fixbooting it. This doesn't help.
This leaves the option of the drivers not being right. I installed the C840 chipset drivers, nothing. I'd really rather not go on a wild goose chase trying to figure out what'll get things up and running
My friend's computer seized up in the middle of the boot. Tried recovery, but it isn't able to go forward. The hard drive seemed to be spinning tho, so chances were good we could recover the data. I removed the hard drive and copied everything to a back-up external drive using my own computer. Replaced the hard drive in the disabled computer. Question is how do I install Windows XP? The recovery files on the hard drive are not accessible, I assume, so we can't use those - right? We misplaced the disks that came with the computer, so I'm buying a new copy of Windows XP.
So I had a failed boot with following message: "Windows XP could not start Additional message said to fix with recovery console from XP installation disk.I did that and Recovery fails because hard drive not detected. I went into bios configuration and no listing of primary ide enabled. What should I do? I checked all the connections and everything is connected. How can I bring my hard drive on line for a recovery?
I am attempting to format my hard drive by booting up using a windows xp disc, and entering the recovery console. After the drivers and such have loaded up and I enter the recovery console, I type format c:, it asks me for confirmation and I type yes. When I press enter, the screen looks as though it is loading for a second but then just returns to the recovery console without having done anything. I try typing the command in again and again nothing happens. When I reboot the computer, my hard drive has not been formatted.How can I get the recovery console to actually format my hard drive?
When I attempted to start my computer, which is running Windows XP Professional Edition, this morning, I received an error message saying Invalid Boot.iniWindows could not start because the following file is missing or corrupt: WindowsSystem32Hal.dllI researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
The recovery console is a very useful application for getting to your data without having to boot XP. If a registry error due to hard disk corruption prevents you from booting XP even in Safe Mode, then it may be the only way.The recovery console is accessible from the XP CD if you boot from disc. If your CD is damaged, however, you may have no way of booting your system without reformatting the hard drive. This means data loss. Data loss tends to create distress esp. if you have no backups.Here is a way to make the recovery console an option in the Windows XP "OS Choices" menu. Do this before an inevitable registry corruption.1. Insert your Windows XP CD.2. Run {CD-ROM drive letter}:i386winnt32.exe /cmdcons3. A dialog comes up saying it takes 10mb, etc., etc. Click yes to install.If you don't normally see the OS choices menu at boot, go into system properties (winkey+pause), click the advanced tab, and xlixk Startup and Recovery. Check Time to Display List of OSs if it is unchecked, and then set the timeout value to a decent number of seconds.Apply the settings, reboot, and you should see two boot options.Here are some KB articles on how to use the recovery console and how to recover from a corrupted
This is an older Dell Dimension desktop pc. It is running a RAID configuration with 2 drives. When I try to do the repair function in the recovery console, the hard drives do not show up in the MAP commmand. Also they are not listed in the Windows setup. However, they do show up in the BIOS, but not available in the boot sequence.I am not that familiar with RAID, are the drives fried or is the system not able to recognize b/c of the RAID?
Recently, my computer has recieved a massive error. Upon startup, the windows xp logog displays and the little blue bar starts moving, then about 1 second later the bar freezes, and BSOD STOP: 0x7e appears. Nothing helps this (restart, last known good config, safe more, and i have no clue why all of a sudden I'm getting this). So, I went to the recovery console with the Win XP install disk. I hit R, it all loads, then where it asks "Which Windows installation would you like to log into?" it displays
My question is regarding the recovery console available on Compaq machines. Is there a similar program to the Compaq recovery console that allows for the home user to install and back up their systems in a nearly identical manner as to how to Compaq R.C. works?
My motherboard went kaput. I got a new motherboard and was going to avoid formating by using a repair install. I did the repair install and booted to windows (in safe mode) but it crashed on agp440.sys, which seems to be a fairly common problem with outdated chipset drivers. I know I can disable this driver in the recovery console, but when I boot to my XP disk, it cannot find my XP installation, It just goes straight to the screen where I can pick a partition to install onto. How did my XP install get lost? I recently fixed up my boot records and everything was fine, I was always able to use the recovery console. Obviously the install is there since I can start booting to it.
i have toshiba laptop and i had to restart after installing poweriso but now it wont go past the windows xp boot screen itll just stay on the black screen it will not boot in safe mode or anything it freezes on the recovery console i have pretty much tryed everything
I am getting the dreaded unmountable boot volume error code. I have a dell lattitude cpxI have installed the windows xp cd and booted up I get into the Recovery console and this is what the screen saysMicrosfot Windows XP (TM) Recovery ConsoleThe Recoevery Console provides system repair and recovery functionality. Type exitt to quit the Recovery Console and retart the computerThe path or file specified is not valid.C: >fixboot
I've got a Gateway laptop and it's giving me the unmountable boot volume blue screen of death at start up. I've scoured the internet and all the solutions tell me I need to use the Windows setup screen to get to the recovery console. My problem is that my computer never gets to the setup screen. I restart with the gateway XP disk and it looks like it's setting up, but then nothing happens, and I don't get any sort of screen that lets me access the recovery console.Is there any other way to get this thing working again, my finals are due the end of this week, and all my most recent/finished files are on this thing.
i did a previous thread of my computer being slow, ignore that one... i got a much serious problem. Someone told me to go into safemode so i just tried to reboot in safe mode. It wouldn't reboot all i saw was a black screen with a mouse cursor so i press the reset button, but this computer is not stable i always haev to press the reset button. Now when i try to restart it jsut reboots again and again. It brings me this blue screen saying STOP:c0000218 {registry file failure} the hive file or sumthing like that and systemrootsystem32configdefault and then it restarts. When i try to go to safe mode i see all these .sys files loading or sumthing and then it gets stuck after like the 20th one. Im on windows 2000, i installed 2000 in cases like these. i found help on a different site. It told me to go to recovery mode, i instert my XP CD and boot it from taht but that doesn't work for sum reason. SO i got my XP boot disks and it works!! BUTTT i go to recovery mode and it restarts and nothing happens! just a plain restart! what can i do!!!
I am trying to format the computer, booting with xp disc and running recovery console, followed by typing map, then format C:it shows it formating, up to 100% then I type exit, as the computer boots up after that it just goes to the normal log in screen like nothing ever happened. After that I tried to install XP by deleting previous OS installation, it installed, but previous folders & files are still there and things are all messed up.Is there software that I dont need to pay for that will completely and totally wipe out everything on her HD? is there another method that will work?
I have two hard drives that were working perfectly on XP. I thentook out the second hard drive because I wanted to try and fix anotherhard drive. When I was finished I then put the original second harddrive back and now it is not recognized anywhere. Why? I may have moved the jumpers but I am pretty sure I did not. Even so I checked the picture on the hard drive and put them in the proper place. Why is the same drive now not recognized when it was just a day ago? I need to getsome files from it
I have a 250GB Western Digital hard drive with a ~195GB partition formatted as FAT32. The partition is called "Documents" and has the letter C: assigned to it. The rest of the hard drive isn't formatted. The operating system (WinXP) is installed on a different hard drive.Since yesterday in My Computer or Explorer it's called "Local Disk C:" and whenever I click on it I get a box that says "The disk in drive C is not formatted. Do you want to format it now?". For two hours it came back and I backed up all the most important information but then the same problem came back again. I was able to see the contents of the partition through a few applications but not access it. My whole computer is working sluggish since this happened.
Hoping to avoid a full reinstall of Windows XP, I'd like to try some repair procedures. The problem is, when I launch my "Vaio PCV-RS430G" recovery disc it goes straight to Sony's proprietary recovery interface which provides ONLY the preset option to wipe my 'c' drive and reinstall Windows. According to some MS articles I've read, an XP recovery disc should allow me to access the Windows Recovery Console (by typing "R" at the welcome screen). Can anyone suggest how I can bypass the Sony recovery and get to the Windows Recovery Console?
When I attempted to start my computer, which is running Windows XP Professional Edition, this morning, I received an error message saying
Invalid Boot.ini Windows could not start because the following file is missing or corrupt: WindowsSystem32Hal.dll
I researched this issue in the Microsoft Knowledge Base, which said to boot from the Windows XP CD-ROM and use the Recovery Console to perform the repairs. However, when I did, it said that Windows could not detect any hard drives and could not continue.
When I boot my computer, it tells me it can't load windows because the following file is missing or corrupt:<windows root>system32hal.dllCan i use the "repair console" to copy this file onto the hard drive from a floppy disk? If not, how do I rectify this problem?
Trying to recover my registry from being corrupted. I am in Windows XP Pro recovery console. But when I try At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp copy c:windowssystem32 configsystem c:windows mpsystem.bak. It says I cannot copy the file. The file cannot be copied.
I spotted that it's named Recovery, i open it and there's nothing in it...but when it's in a .rar it shows everything that it has in it, when i extracted it showed nothing, i think they're hidden
I bought a laptop and burned 4 recovery CDs for recovery purpose. Instead of burning as disc images, I just copied and pasted these 4 CDs to my USB HDD as 4 folders called "RecoveryCD 1", "RecoveryCD 2", "RecoveryCD 3" and "RecoveryCD 4". Now my laptop got problem and I lost my 4 recovery CDs. All I have now is 4 recovery folders in my USB HDD. I burned another 4 CDs as data disc from my USB HDD, but it didn't work out (it didn't boot because they are just data discs). I again burned my first recovery CD as a bootable CD, and it booted but didn't automatically install XP, drivers and other softwares. It just appeared some sentences on a black screen and cursor is waiting for me to type after the text, "A:>".
The other day my computer crashed during log off. When I turned it on again, i ended up with a blue screen saying 'unbootable boot volume' . I guess at this point i should have sent it to a technician!...anyway i found a number of forum posts with the same problem and followed the instructions to do 'chkdsk' from MS DOS. This looked to be doing stuff.... but now... instead of a blue screen I get nothing...the screen just goes blank!
I found myself facing a black screen with this text:"We appologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.It your computer stopped responding, restarted unexpectedly, or was automaticlly shutdown to protect your files and folder, choose last known good configuration to revet to the most recent settings that worked.If a previous start up attempt was interrupted due to a power failure or because the powe or reset button was pressed, or if you aren't sure what caused the problem choose start windows normally
I need to get into the reocovery console to fix my master boot record but when it askes for my admin password, i enter what it should be but it doesnt work, ive tried leaving it blank and tried other passwords, and nothing. is there a way around the password fto run fixboot and fixmbr?
My problem is (to cut a long story short) that I have some dodgy .dll files, messing up my computer (XP) and preventing me from installing anything (not fun when the my computer fixer guy has reinstalled windows, failed to fix it, charged me fifty quid for the privelege, and left me with next to no software on it - not even word).i bought a very informative xp troubleshooting manual yesterday, and i can see my only option is to replace the files using the windows recovery console (I cant replaced them from within windows as its always using them).However, when I try to access the recovery console (in the manner advocated by my book, windows help, and numerous internet pages), by booting up from my recovery cds, and pressing R, i get taken to system recovery, a user friendly interface displaying 3 options for reformatting the whole system, and nothing else. this is obviously not the command prompt interface for the recovery console that i was expecting to be faced with.
I am trying to access the windows recovery console on the xp setup disk.However when I boot up the windows setup disk, it loads the files and goes straight to the menu where I have to choose which partition to install XP on.How do I get into the recovery console?The reason I am using recovery is because I have got a Error Message: Windows Could Not Start Because the Following File Is Missing or Corrupt: WinntSystem32ConfigSystem, when starting up the computer.
I have tried to use the Repair in the Windows recovery console, but everything says when you get to /windows, you enter your password yada yada yada.In the recovery console, under repair, I only have C:/>, there is no C:/>Windows at all.I ran fixboot anyway, now I am getting a NTLDR is missing message when I try to start. Before all of this I was stuck trying to boot up and it would not even let me into safe mode.
