Deleted USB Enhanced Controller 2.0 Now Can't Find
Oct 22, 2005
I was trying to get my digital camera to work.. for some reason Windows is not finding it and assigning it a drive. So I was going to delete all of my USB ports and reinstall them. Well I deleted my Enhanced 2.0 port and now Windows is telling me that it can't find the driver for it!I have used the Windows CD and it still wont work! I am at a total stand still. I dont know what to do!If anyone at all has any ideas about the USB problem or the camera problem,
Iv got a Gateway MT6705 laptop with Windows Vista Pre Installed and I dont like it one bit. But when I went to install Windows XP Professional SP2 It says No hard drive found. It has 120Gb SATA hard drive installed using a Intel SATA Controller.
i just installed xp pro on my gatway 450rog all is working well but in the other device there are 5 things with yellow ? on them not the netork card that is fine but the ethernet controller,modem, how do i fix this i can not get it to conect to the internet to update thses
i just did a clean install on my laptop and upon checking device manager i encounter question sign for (1)Multimedia audio controll (2)Network controller and (3)PCI Modem.Isearch Toshiba site and they do not list my model computer and i have seen the AC97 audio driver elsewhere but it just wont work. Anyone care to point me in the right direction.System is Toshiba Satellite A55-psa50u-03c021, serial number 64094885H, Chipset i855GME. Sound card is AC97(82801db)
#1. Why are my posts running off the page on the right hand side...(I have to slide the bar to the right to read it all and this is the only place it is happening.)#2 I takes almost 2 minutes 1 & 1/2 anyhow for my computer to "come up" and I have broadband. I want to know where I can find what programs are running that I may can disable from running when I start up, but be able to get to them when I need them also what is MSN Video Enhanced, (the icon is in my tray at the bottom right hand corner),is this something I installed?or did it get put there thru something else?
When I click on my C Drive icon in my computer it opened another program. I deleted this program and now get a message saying it cannot find the deleted program. Does anyone know how to fix this?
Can a Windows 2003 Domain Controller communicate with a Windows 2000 Domain Controller? The reason I ask this is that I want to upgrade my Domain Contoller to Windows 2003, but want to have the backup Windows 2000 machine running as a backup Domain Controller.
Can I recover messages I accidentally deleted in Outlook Express of Windows 2000XP? These messages were in their own file but somehow got moved to a subfile of the Deleted Items folder. In trying to removed the Deleted Items folder the sub-folder went with it. There were a large number of messages I had received via e-mail that I intended to keep.
First I booted from the Windows XP cd because I wanted to format the C drive. I had forgotten I had my external hard drive still plugged in and I accidently deleted the partition for it and created a new one. I didn't FORMAT it, but then when I started up my computer, all the files were gone. So does that mean my files are premanently deleted or can I save the files somehow?.
A way to recover deleted files that were deleted from the recycle bin.Maybe someone has a favorite utility that they've used with success.I am using Windows XP.
I just formatted my comp and re-installed XP. I had vista for awhile but I discovered that it sucks. I am using a custum built computer and i cant figure out if its the driver or what
While trying to upgrade from Windows 98SE to XP professional I get a compatibility message that says upgrade is blocked because my HPT366 ultra ATA/66 IDE controller is not compatible.Is there anything I can do, such as a driver upgrade?
I just installed a nexxtech 7 port 2.0 usb hub,and now when I use my printer up pops this"You must add a hi speed usb host controller to this p.c. to obtain max. speed." Can someone simplify what is necessary here. My cordless mouse,netmate link and printer are all that runs off of this usb hub. WXP/pro/sp2 800 mhz.
I am tring to install a USB serial cable to enable me to use com port devicse since my laptop doesnt have Com port device.I have the serial cable and any time i try to install it it asks for a soft ware to be installed, but i dont have the software.Can any body help me out to solve this problem plz? This is the spcification what i get from device managar+USB controll+Details.
I recently had a problem with the VUNDO Trojan on my XP PC. I removed it using MalwareBytes but it appears to have left a problem behind.
In my System, Device Manager, I have an entry for my SCSI and RAID Controllers called ACLGRWTP IDE Controller which is yellow flagged. I have uninstalled it but it always comes back and XP tries to install it to no avail.
Someone reinstalled Windows XP on my son's computer, and now it is not working properly, so I am trying to help get it fixed. I have limited experience with this sort of thing. The specs on the computer are as follows: Acer Aspire 5050-3371 AMD Turion 64 Mobile Technology MK-36 (2.0 Ghz 512 KB L2 cache) It will not connect to the internet, and when you check the Device Manager, it gives a yellow question mark under "Other devices". The other devices that have question marks
required the reloading of Windows XP professional on my factory-loaded laptop. I didn't have the CD, so I went to a shop and they did it. Since then, I've been getting this "new hardware" balloon when I start up, and it asks for file "el90Xbc5.SYS on ECD541DP90X". It asks for dwinxplan to load it from. Being CD'less, I've just cancelled it before. Now I'd like to work out how to deal with it can I get this file from somewhere
I recently purchased Madden 2005 for the pc, I have always used a PS2 controller with a adapter to use it on my pc, but now I am having problems configing it with my ps2 controller. My adapter came w/ just a driver no software. Is there any universal software that I could use that could possibly make it so I could revamp what keys are assigned to which button. If you buy a logitech controller, it comes w/ software to change which button is considered button "1" and "2" etc...Im looking for something like that, that you could use with this adapter, like I said something universal.
I've just bought a Lacie Porsche external harddisk 120GB if i connect it to a Windows XP Pro. SP2 / Desktop Small factor D500 1.7 Ghz PC the controller recognizes that a device has been connected but i cannot find it of my computer neither on the Disk management window.
I have a USB controller for some of my games, and I don't know how but after a while problems started to occur, and my controller would no long work properly so every time I booted up my PC I had to unplug it and plug it back into another port, and it would work. Now My controller doesn't work with any of the ports except 1, so now when I boot up the PC in order to use the controller I have to unplug and replug it into the usb port.
This pc has been with me for a few months, no poblems at all. One day it just Bsods. Thinking it was just some random WinXP error, I restarted it and never thought of it again, until it happened AGAIN. 3rd times the charm, right? WRONG. After a few more I couldn't do anything basically. Boot > Bsod. So after a few Google searches and self troubleshooting later I got it almost sorted out. Also if I take this HDD to another computer it works fine. So, the problem seems to be my IDE controller. (atapi.sys) So I am requesting a place where I can find a clean atapi.sys and go replace it with the windows system recovery console. Also I am curently running a full system check for viruses on that working computer.Stuff that I have tried while trying to fix the bsod: Changing IDE cables, Resetting the bios/cmos reset, plugging it into the secondary IDE port, playing around with jumpers, replacing RAM sticks.
I Was wonering if any one could help me find a driver for a windows 2000pro. For some reason there is none there We are haveing trouble find the ethernet controller as shown here.If any one has any advic]e please let me know i cant seem to find it anywhere and i cant get onto the internet on that computer.
I have just reinstall my operating system and everything goes smoothly except that I found an yellow exclamation mark in 'NEC PCI to USB Open Host Controller' under Universal Serial Bus Controller.However when I turn off my PC,I encountered problem in swithing on again.I have to continuously press the startup button in order for it to boot again.Is that yellow exclamation mark the cause of this problem?If not,then what has happen to my PC?How do I get rid of that eclamation mark?I am running on windows XP Pro Serv.Pk2.
I need a driver for an Ethernet Controller for an Asus system board numbered PTGD-VX in a sony Viao model # PCV-A11L Running windows XP Pro. Asus's site has been down for a few daya nd I cant seem to find it any where. I will keep looking but if some one could point me in a good direction I would be grateful.
i have problem in my computer can any one help me please this is my problem in the Image [[IMG][/IMG] what I must to do to fix this problem / my computer is toshiba and model is (tecra)
I have a windows xp service pack 2.My computer is a gateway.I have a Creative Sound Blaster PCI 128 And a Avance Audio Controller They both state that their enabled but not started. how do i start it?
recently we had power failure and when I turned my computer back on, my bios came up.I tryed to exit out but some how disconnected or turned off my second hard drive and can not get it to go in the active state again, how do I check for the missing letter E that the drive is on orfind access to this drive
