USB Port - Can't Use Usb Controller Normaly
Oct 8, 2009
I have a USB controller for some of my games, and I don't know how but after a while problems started to occur, and my controller would no long work properly so every time I booted up my PC I had to unplug it and plug it back into another port, and it would work. Now My controller doesn't work with any of the ports except 1, so now when I boot up the PC in order to use the controller I have to unplug and replug it into the usb port.
View 1 Replies
ADVERTISEMENT
Dec 30, 2005
I just installed a nexxtech 7 port 2.0 usb hub,and now when I use my printer up pops this"You must add a hi speed usb host controller to this p.c. to obtain max. speed." Can someone simplify what is necessary here. My cordless mouse,netmate link and printer are all that runs off of this usb hub. WXP/pro/sp2 800 mhz.
View 14 Replies
View Related
May 25, 2005
i heard some clicks comming from within my comp case, when a click occurs, its like bad lag, everything freezes up for a bit, then goes back to normal.. it started getting pretty bad, so i restarted my PC and then it went to C: CHKDSK thing, it did its thing, and i guess it found some bad clusters, (went to fast for me to read)..
it started the windows account page (where u can log onto each user profile) and a window poped up..
"Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile. If this problem persists, contact your network administrator.
View 5 Replies
View Related
Oct 17, 2007
I have a laptop that is showing the Ethernet port as a 1394 port. How do I get it to recognize the Ethernet port correctly ?
View 10 Replies
View Related
Apr 29, 2006
is there a way to change the IIS port from port 80 to 81 or something?
View 2 Replies
View Related
Feb 22, 2008
Can a Windows 2003 Domain Controller communicate with a Windows 2000 Domain Controller? The reason I ask this is that I want to upgrade my Domain Contoller to Windows 2003, but want to have the backup Windows 2000 machine running as a backup Domain Controller.
View 1 Replies
View Related
Feb 3, 2010
On my Windows XP tablet, if I put an MP3 player into a USB port, does it charge the battery even when the pc is completely shut off? I don't like to leave it plugged in to charge when I am using the pc since it keeps bonging (making a darn noise) every few seconds.
View 4 Replies
View Related
Jul 26, 2005
I have not changed any settings yet i am trying to download some music and all of a sudden it wont download because I dont have a tcp port available.How does this happen when i have already downloaded 100s of songs and in the next breath.I can't.
View 3 Replies
View Related
Dec 19, 2008
I got an app that send e-mail alerts. Unfortunately my ISP only allows SMTP traffic on port 587. This app only uses the standard port 22.Is there anyway in XP for me to remap outbound port 22 to port 587? I found the firewall port settings but it will let you enter new ports and redirect them I believe but it won't let you edit any of the standard port settings.This is a tough one. I doubt there will be many, if any replies with a solution. But worth a shot.
View 8 Replies
View Related
Jun 22, 2004
I got and DOS program that need to print to to network printer. the only way to acces that printer is by IP adress. So, is there a way to redirect an LTP port to an IP printer ?
View 6 Replies
View Related
Jan 24, 2005
what is the bit torrent port number? where it could be found on internet or i have to buy from shop or some ware.
View 4 Replies
View Related
Jan 3, 2005
The USB port on my Laptop has been broken by accident and I would like to know whether it is possible to replace it somehow, by myself. If not, could you please suggest me how it would be possible to have a USB port on my laptop.
View 3 Replies
View Related
May 23, 2005
I recently installed windows Xp and SP2. But now when I plug a device into a USB port I don't get the pop up saying "detected new hardware". Also the new device (I pluged in a flash memory drive) doesn't show up when I open "my computer". I think the ports are working cause when I pluged in my iPod and then went into the BIOS the iPOd was listed as an option on the Boot configuration.
View 6 Replies
View Related
Feb 2, 2010
Any information available for a trojan attack from 171.205.238.45 port 50223?System restore will not open...file RSTRUI.EXE is infected.
View 4 Replies
View Related
May 1, 2006
I just did a reinstall of my friends E-Machine and when I try to install the printer (hp PSC 2410 xi photosmart all in one) I get this message when I go to plug in the USB cable to the computer from the printer. In the task bar I get this message: "Power surge on hub port. A USB device has exceeded the power limits of its hub port".
View 6 Replies
View Related
Aug 3, 2007
Ive tried disconnecting and reconnecting it a different cable, a different port, even a different computer.
View 4 Replies
View Related
Jul 7, 2006
I have a Dell Optiplex GX240 running Windows XP Pro, Pentium 4,512MB of Ram,40G hard drive and an external 200GBHDD. A 250W power supply. The unit has 3 built-in USB 1.1 ports and I added a USB 2.0 PCI Card for the external. I presently have an USB hub port hooked up to one of the USB 1.1 ports, which leaves the other 2 free. On the USB hub port I have an old HPScanjet 3300 scanner, an Intel Webcam and my Sony Cybershot camera. On the USB 2.0 PCI Card I have only my maxtor 200GB external. I am recently getting a balloon red x alert in my system tray that reads "Power surge on hub port" (A USB device has exceeded the power limits of its hub port)and what to do to solve the problem. When I click the message to solve the problem I see a question mark which I then highlight and hit reset.I follow the instructions to reset and it reappears.
View 2 Replies
View Related
Mar 8, 2008
I pluged in usb hub into computer, and everything was fine until 2 days ago. suddenly i get message that usb could preform better if pluged into USB 2.0 port.i tried everything and nothing happened. i tested usb hard drive plugged into hub, and it was very slow. when i pluged usb hard into computer it was normal.then i was mad and destroyed the hub. i bought new one. and same thing.
View 2 Replies
View Related
Jun 10, 2010
I wanted to enable the USB ports in the machine. I have gone through a lot of sites which says how to enable the USB ports by making changes in the registry and all, but all for vain.
View 6 Replies
View Related
Jul 13, 2005
After installing a USB to Serial adaptor I've found that often when the adaptor is removed and reinserted the old COM port is not necessarily used. So, several COM ports are assigned to the device and when I need to get at COM1 and COM9 to install a new device they are in use. Even un-installing the USB-serial adaptor does not free up the ports. What are the registry hacks that would allow these ports to be reused or shown to be free? Or is there some system mod software that would do it? I did find some registry entries but when I tried to delete the entries, Delete was not allowed.
View 6 Replies
View Related
Jun 25, 2008
I installed windows xp pro on a computer, and it did not include the drivers for the ethernet port, therefore i cannot connect to the internet. ive been using a rewritable disk to transfer files, so can anyone post a link on how to get them?
View 7 Replies
View Related
Jul 23, 2010
When I plug an ethernet wire from a router to the ethernet port on my computer, nothing seems to happen. There is no LAN option under my "network connections" either. My first guess is that I don't have the correct driver installed (or if I have one at all for the ethernet). Can anyone help me? I tried to open up the computer to see the brand of the Ethernet card but Some of the screws were stuck and I couldn't seem to open it. It is a Laptop running Windows XP by the way. I bought it at cyberpowerpc.com.
View 14 Replies
View Related
May 10, 2007
I just formatted my comp and re-installed XP. I had vista for awhile but I discovered that it sucks. I am using a custum built computer and i cant figure out if its the driver or what
View 14 Replies
View Related
Dec 28, 2005
While trying to upgrade from Windows 98SE to XP professional I get a compatibility message that says upgrade is blocked because my HPT366 ultra ATA/66 IDE controller is not compatible.Is there anything I can do, such as a driver upgrade?
View 4 Replies
View Related
Feb 25, 2007
I am tring to install a USB serial cable to enable me to use com port devicse since my laptop doesnt have Com port device.I have the serial cable and any time i try to install it it asks for a soft ware to be installed, but i dont have the software.Can any body help me out to solve this problem plz? This is the spcification what i get from device managar+USB controll+Details.
View 6 Replies
View Related
Aug 26, 2009
i have 2 Ethernet cards. here is the config desktop:eth0-router-modem-internet eth1-router-self contained network, laptop: wireless-wireless router-router-modem-internet eth1-router-self contained network now how do i tell windows not to use port 80 (or the internet ports at all) on eth1
View 2 Replies
View Related
Jul 18, 2005
i bought a lexarmedia 512mb drive.. XP Pro won't recognize it.. i inserted it into every USB port on my system same message then into another computer it works great.device manager says the different USB ports are working correctly and i've never had any issues with any other USB hardware before
View 2 Replies
View Related
Jun 28, 2005
I have XP pro SP2 so how can I make sure that is my USB2 port is configured and working as USB2 not USB1.
View 1 Replies
View Related
Apr 8, 2005
I have a Dell d800 that the IEEE / 1394 port is not working. I have tried everything : bought a cardbus card for the 1394, uninstall the device then reboot for windows to re-establish the drivers, disabled / reenabled to device, new drivers from dell, ms, and maxtor, updated bios from Dell for the D800, double checked the BIOS settings, and ran Dell Diagnosics cd (never had luck with this one), you name it I tried it.I am trying to attach a Maxtor HDD drive to the computer it doesn't have any usb 2.0 connections.
View 2 Replies
View Related
Mar 27, 2007
I have a strange issue in that I cannot connect to remote port 25 from windows xp workstations. Some workstations are ok, and this works, some are not. All these workstations are in a windows 2003 domain and all are xp sp2. I've seen this before but not found a solution. All the workstations here have their firewalls enabled with the same configuration via GPO. So all I can think of is that microsoft's crippled tcp/ip stack is responsible for this in some lame attempt to reduce spam or something, but we need this as it stops some legitimate processes from running (for example command line utils and python programs that need to send notification emails.
View 4 Replies
View Related
Jul 28, 2005
I am having problems getting my USB optical Microsoft mouse to work on my new Toshiba Satalite A85 notebook.I plug it in to any of the usb ports and it wont work. I tried restarting too
View 1 Replies
View Related
