Start Up - MSN Video Enhanced

Mar 28, 2005

#1. Why are my posts running off the page on the right hand side...(I have to slide the bar to the right to read it all and this is the only place it is happening.)#2 I takes almost 2 minutes 1 & 1/2 anyhow for my computer to "come up" and I have broadband. I want to know where I can find what programs are running that I may can disable from running when I start up, but be able to get to them when I need them also what is MSN Video Enhanced, (the icon is in my tray at the bottom right hand corner),is this something I installed?or did it get put there thru something else?

View 6 Replies


ADVERTISEMENT

Deleted USB Enhanced Controller 2.0 Now Can't Find

Oct 22, 2005

I was trying to get my digital camera to work.. for some reason Windows is not finding it and assigning it a drive. So I was going to delete all of my USB ports and reinstall them. Well I deleted my Enhanced 2.0 port and now Windows is telling me that it can't find the driver for it!I have used the Windows CD and it still wont work! I am at a total stand still. I dont know what to do!If anyone at all has any ideas about the USB problem or the camera problem,

View 11 Replies View Related

Video Lag Every Time At Start Up

Oct 22, 2005

I have a really wierd problem here. Whenever I open netscape, the window "lags" when it opens. The window kind of comes into view slowly, like its lagging or something. Samething if I open a word <ocument. When I scroll, little chunks move at a time and it all lags till I finally get where I want to be. Also, Half Life 2 won't load anymore. The wierd part is, It used to be fine, then out of no where this starts happening.

View 4 Replies View Related

Error: Cant Enter Setup. Video Mode 103 Not Supported By Video Card

Oct 31, 2007

Recently I was playing a game, when my screen froze. I then shut my computer down to restart it, used it a few times (in 4-bit safe mode), then after I shutdown again, I cant log back in... it just freezes and the screen flashes, I cannot boot into my computer setup (default f2) or into safe mode (default f8), however I can run the XP cd and get into the recovery console, is there any way that I can change the boot sequence from the recovery console? The screen is dotted with a bunch of dots up and down the screen in columns, and is in 4-bit video mode.

I have a Dell xps gen 5 with xp home.

the error I get is:

"Error: Cant enter setup. Video Mode 103 not supported by this video card."

View 3 Replies View Related

Imported Video Footage Playing On Audio Line Not Video?

Sep 20, 2005

I have managed to put video footage onto my PC from a video cassette (by plugging my VCR into the TV aerial socket). The video footage is saved on my PC as .mpg files & when I open them, they play fine on Windows Media Player.When I import them on to Windows Movie Maker, they are recognised as video footage and I am able to put them into the collections as video. However, for some reason, when I drag them onto the timeline, they go onto the audio line & I can't get them to go on the video line, so when I play it, the sound plays but there is no picture. I have tried saving them as .AVI files but that makes no difference

View 1 Replies View Related

Video Editing Application Hangs When Importing Video Files

Oct 11, 2007

I have window XP SP2 installed on my laptop. I also use InterVideo WinDVD Creator for video editing. Recently when I try to import video file into my application, my laptop, processing percentage goes up to 98%, and the application just freezes up. I also tried the Microsoft movie maker software and I get the same result. I was wondering if I need to reinstall the application or there is something that my laptop is missing. The application was functioning fine until 2 days ago, and since then I haven't installed any other application.

View 8 Replies View Related

Video Playback In Media Player 10 Playing Some Video Clips?

Jul 26, 2005

My Windows Media player 10 is trying to play some video clips as songs rather than video clips. This has only recently happened. Do I need to purchase some
decoder to fix it or is there a down oad for it?

View 1 Replies View Related

Video Files Wont Play In Indeo Video Software?

Sep 11, 2005

Some of my video files are not working for want of Indeo Video Codec. I have been working on a video convert tool as my last application. I do not know what happened and this got corrupted. It gives pop up message for MS Encarta Video files saying "The program you are trying to run requires a current Indeo codec To obtain a current driver that is compatible with this version of Windows, please contact the manufacturer at http://indeo.ligos.com.". When I check with them, they ask me to contact OS supplier

View 2 Replies View Related

Enable To Play Video: Computer Keeps Losing Video Display?

Apr 26, 2006

The problem is the computer keeps losing its video display. Just went black. I reinstall the drivers and restart and the computer runs fine. Use fine, then after its been on for awhile it goes black again. Weird. I have the newest drivers and all the windows updates loaded. It just keeps going out. I have tried several screens as well to rule out the monitor freaking out.

View 1 Replies View Related

Imported Video Skips: Video And Audio Are Disjointed?

Jun 14, 2005

I imported a video of 90 min length onto my computer. When I imported it into Movie Maker the final quarter skips and the video and audio are disjointed. What caused this?

View 3 Replies View Related

Try To Play Video File / Plays Audio With No Video

Oct 20, 2007

just got a new computer recently and updated the media player to windows media player 11 but when i try to play a video file it just plays the audio with no video.. anyone know why this is or have any tips?

View 4 Replies View Related

Video Card With S Video In And Over 1024 Pixels Resolution

Aug 12, 2005

I hooked up my Xbox to my PC to play online using my monitor, only to find out that my NVidia Geforce4 Ti 4200 can only display a max resolution of 720x480 through my capture software, and this ain't good enough for me. Does somebody know of any specific card/adapter TV Tuner that has an S Video input and could give me resolution over 1024 pixels under $100.

View 3 Replies View Related

Keep Onboard Video Active After Installing A Video Card

Jan 26, 2010

I want to install a video card to my pc but I want to keep onboard video active so I can run two monitors.

View 1 Replies View Related

Video Editing Software / Have A Link To A Video

Oct 23, 2009

First of all I'll start by informing you THIS IS NOT A HARDWARE ISSUE! (all caps for emphasis not for anger.) I need to know how to fix this fast clink the link for the video there's two parts it's not long each part is only a minute long.

View 1 Replies View Related

Video Adapter Disabled In XP, How Do I Get Video Back?

Dec 27, 2007

My kid just disabled the video adapter on his XP Pro machine (Compaq, PII, on-board video) and now the initial Win XP screen comes up then goes dark once it gets mostly through the boot-up. It won't do any different in safe mode and even installing an AGP video card didn't get me around this. Short of reloading XP, is there a fix for this? Also tried reloading default BIOS settings just in case, no change.

View 5 Replies View Related

Try To Play Video Play At Bottom Left Hand Side Of Screen / Nothing Plays / Audio Or Video

Dec 29, 2004

i have a problem with windows media player, whenever i try to play a video, it says play at the bottom left hand side of the screen but nothing plays, audio, or video, what do i do?

View 2 Replies View Related

Video Card Issue Or Something More Serious? (w/ Video)

Jun 14, 2010

I was working away on my desktop tonight, and suddenly the monitor started freaking out. Here is a video to show you what's going on at startup, When it happened I was working in Cubase. I'd just reset the audio driver, and it started doing like in the video. After a little bit, the signal cuts out completely. It's not the monitor, I've checked with a spare and it's the same. I don't have another video card around at the moment, but I'm wondering if it's likely to be an issue with the hardware, or software/virus type stuff.The computer is XP, 2gb ram, nVidia Geforce card (sorry, can't recall which one) etc. Incidentally the card itself looks fine, ie it doesn't look like it's shorted or anything.

View 1 Replies View Related

Generic Video Card Video Card Not Working Properly

Aug 16, 2008

i recently have done a reinstall of windows xp but the system cannot seem to be able to find the systems video card drivers and i have checked on the properties under adapters and the whole list says n/a so i have no way of find out what drivers i need to download. I have an emachines 5250 if that is any use.

View 2 Replies View Related

Can Only Start In Safe Mode - Windows Was Unable To Start Successfully"

Dec 14, 2006

I recieved the following message after a forced restart after windows updates were installed: "We are sorry for any inconvenience but Windows was unable to start successfully" My options are to start in Safe Mode , Last known config or normal. Safe Mode is the only thing that works. Also System Restore would not work Also System Recovery from Sony Vaio Recovery Wizard would not work

View 8 Replies View Related

Start Up Takes Too Much Time - Eliminate Items In The Start-up File

Jun 2, 2006

I have a Dell PC 8250 and over the past two yrs I have managed somehow to increase my start-up time by inadvertently adding to my start-up file. I understand that there is a way to eliminate items in the start-up file but having been to the site, I cannot determine which items to delete without messing up my system. Please advise, and maybe tell me what the basic start up should look like.

View 6 Replies View Related

Boot Start Or System Start Drivers Failed To Load

Mar 10, 2006

My old system hasn't been powered on for about a year. Problem was the onboard video failed replaced it with a video card from another system (riva TNT) and bought some memory system wouldn't boot, determined that the memory was bad Now the system booted but win2K wouldn't work. No problem I have XP now. After multiple error during the xp install I finally got through it.only the computer will only boot in safe mode. Initially thought it was a hardare conflict so I booted in safe mode with networking and systematically cleared all the yellow.

View 10 Replies View Related

Start Cmd Command Error Message >Windows Cannot Find Or Start

Aug 6, 2005

In a not updated Version of Windows XP you can run (Start-run) "start"command at the Run dialog just typing it, when you update windows andwrite the same "start" into Run dialog Windows shows a error message >Windows cannot find `start`. Make sure you typed the name correctly,and then try again. To search for the file, click the Start button, andthen click Search.If you are in CMD the `start` command works fine but the problem is thein Run dialog windows doesn’t recognize it ?

View 1 Replies View Related

Windows Wont Start:did Start In Safe Mode Now Cant Even Do That?

Mar 6, 2008

It never would start windows normal but would in safe mode,so now i did a diskcheck and restarted now it gets hung up on the system32driversagp440.sys...at least thats the last one that pops up before it freezes.

View 4 Replies View Related

Moved Start Up Programs From C To D And Now System Doesn't Start

Jan 12, 2007

I admit it...I moved my startup folder from C drive to D and now I am dead in the water. The computer is a Sony PCV RS420 with Windows XP Home Edition with all the updates. When I start the comp. I get "SONY" on the screen and thats it. Unresponsive to all F commands.

View 6 Replies View Related

Programs Will Not Start Even Though Desktop Icons & Start Menu Appear

Jun 5, 2008

I have experienced a sudden problem starting programs. The computer boots correctly, and all desktop icons appear correctly. But when I double click a desktop icon, or start a program from the start menu, I get a popup window displaying a list of programs and asking me which program I want to use to start the application. I select the correct program (or browse to the appropriate .exe file), but still the application doesn't start. This includes IE and Windows Messenger. My virus scanner was about the only thing that I could start up, and I did a system scan with Panda Anti-Virus, but it didn't show anything substantial (just some cookies).Using my WinXP set up disk,I've tried to do a repair (I guess reinstallation without reformatting the hard disk), but after I entered the License Key, the computer did a reboot and then stopped. It is stuck on the XP splash screen and won't go any further (I once let it run over night, but it was still frozen on the splash screen). I even tried to repeat the repair process, but that didn't work.Automatic updates did download an update just before this problem started (I think it was the day before the problems began). I don't know what this update was and I'm not sure it was SP3 (system does have SP2 installed).Considering that the computer freezes now when booting up, is there anything that I can do short of reformatting the Hard Drive? I also have another hard drive that I can use to install XP onto. Is there any way that I can rescue the data from the old Hard Drive and transfer to new drive?

View 6 Replies View Related

Powers In But Start Button Wont Start Computer

Jul 30, 2007

I believe its a problem with the actual start up button instead of the computer itself, ive pried the thing open, seeing the generator is on, everythings in place and there are lights on, showing there is power. any ideas?

View 2 Replies View Related

Show Start Manager Icon Name Place Of Start

Feb 16, 2010

How can i show start manager icon name ayub place of start.

View 2 Replies View Related

Does Not Start Up Properly - Power Failure Start Windows Normally

Aug 18, 2008

We are trying to start a laptop but windows is not starting up properly. As the boot begins, it takes you to a screen that says, :"if a previous start up attempt was inturrupted due to a power failure, then choose Start Windows Normally". We follow the directions, takes us the Window XP screen trying to boot it up and then takes us to the Gateway screen and then back to the screen where it asks the same question again.The cycles continues without any other options.

View 6 Replies View Related

Not Start Applications / Hangs Up With Hourglass After Start Ups Run

Aug 20, 2008

I have a Compaq Presario desk top. one gig memory. XP which is up to date. Run AVG free, windows defender, threatfire, spybot.I am on a cable hookup with a linksys BEFSR41 router. Turn off the computer each night.Right now I am using a laptop connected to the router to access the internet. the desktop would take a long time to start up applications but when they did start up things ran ok. This morning, I power up and the computer will go thru the speed start up list but will not start up anything from the start menu, just get the hour glass. On start alt delete, it says 99 percent system idle. On start up I hit the f10 key to start up a compaq system restore and it will not go.get the message system registry file failure, hive file, system root system32 configsecurity corrupt, absent, or not write able.

View 3 Replies View Related

Choosing Which Applications Automatically Start Up When Start

Apr 4, 2005

How do i get to the little menu where I can choose which applications automatically start up when Windows starts up and which do not? I forgot how to get to that menu but I remember that I could check and uncheck which things would start up, etc. The reason for this is because everytime I start windows, it tries to load my scanning software which I don't need started anymore due to the scanner not being connected at all anymore, and the un installation not going as properly as it should of.. but it just bugs me that it tries to connect to the scanner (with about 3-4 attempts) when Windows starts so this is my best option.

View 4 Replies View Related

VGA Video Driver

Jun 8, 2006

you know download site for VGA compatiable video drivers for Win XP Pro? I've been to ATI, ASUS, and even downloads.com but I can't seem. I'm installing on a clean hard drive.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved