i have problem in my computer can any one help me please this is my problem in the Image [[IMG][/IMG] what I must to do to fix this problem / my computer is toshiba and model is (tecra)
View 11 RepliesLoaded a fresh install of Win 7 SP3 in a Compaq 5205us desktop. The net interface is recognized, the network connected symbol is there, but I get no access. The 5205us says it needs the ATM network controller.
View 7 Replies View Relatedi just did a clean install on my laptop and upon checking device manager i encounter question sign for (1)Multimedia audio controll (2)Network controller and (3)PCI Modem.Isearch Toshiba site and they do not list my model computer and i have seen the AC97 audio driver elsewhere but it just wont work. Anyone care to point me in the right direction.System is Toshiba Satellite A55-psa50u-03c021, serial number 64094885H, Chipset i855GME. Sound card is AC97(82801db)
View 2 Replies View RelatedCan a Windows 2003 Domain Controller communicate with a Windows 2000 Domain Controller? The reason I ask this is that I want to upgrade my Domain Contoller to Windows 2003, but want to have the backup Windows 2000 machine running as a backup Domain Controller.
View 1 Replies View RelatedI am trying to create a full HD image of my Dell c800 Laptop using Drive Image 7 (circa 2003) to an USB HD. I have tried twice and received failures about my HD having bad sectors OR locked sectors. I ran check disc with repair and did not find any problems. Re-ran check disc from the boot disc that came with the application and found no problems with the disc. Tried again for a backup and received the same error. I am thinking it is one of the programs I have loaded has a locked sector or one of my processes that loads during boot is the problem?
View 14 Replies View Relatedwhats the best way to replace the native Win XP boot gui screen with my own graphic message display when XP Boots?
View 3 Replies View RelatedSo two days ago my computer suddenly decides that when I arrive back home it would want to start running like a win 95. Thus, I promted to shut it down. Once it arrived to the loading screen after the reboot nothing occurred. I then decided to wait... 30mins later it goes black and then the message arrives: "Winlogon.exe-Badimage The Application or DLL C:/Windows/System32/sfc.dll is not a valid windows image. Please check this against your installation disk settings." I have alot of stuff on my computer I need for work, is the only option to deleted everything and re add XP?
View 8 Replies View RelatedI have Windows XP Sp2 whe i try to chanhe ip in "Local Area Connection" i got following message:" Network Connetion Folder was unable to retrive the list of network Adapters":i checked "Services" .Ok working fine then what 's the problem??
View 1 Replies View RelatedI try to run network set up wizard but it wont find my network device.It finds my network card but i installed a wireless card. It wont find that. Its a linksys and I am using the linksys software to run it.
View 7 Replies View RelatedI have a gateway 6520 gz laptop with IE6 and XPHE, I 'm on a network with two computers and use NETWORK MAGIC for the network, when I turn the laptop on it wants to display {the page cannot be displayed} instead of going online! Then NETWORK MAGIC pops-up and says {YOU ARE NOW CONNECTED} then I have to manually turn on IE6 button to go online, almost like the page {the page cannot be displayed} wants to come up first instead of the connection?
View 14 Replies View RelatedI need to have network drive on my Windows XP computer. In order for a software to work, there needs to exist a network drive, named N, existing on my PC. Since there's not a second PC to link to, what I did was to created a directory named est on the same PC , share it out, and then, map a network drive, named N, to it. When my PC has an Ethernet cable connected to a switch, Windows XP will see that N drive (existing on the same PC). The moment I disconnect that Ethernet cable from the switch, the N drive is gone. Is there a way to have a mapped network drive on XP (as mentioned above), without the need to have a network cable connecting that PC to a switch?
View 3 Replies View Relatedi have a problem with my network folder.It seems that I can't see my existing network connections in the folder! I first noticed this when i click on my dial-up connection the connection window won't come up.When i open the network connections folder in the control panel, an error message comes up with this message:The Network Connections Folder was unable to retrieve the lsit of Network adapters on your machine. Please make sure that the Network Connections service is enabled and running.
View 6 Replies View RelatedMy network adapter does not appear in Device Manager, until I "Show hidden devices". And then it appears as a "Realtek RTL8139 Family PCI Fast Ethernet NIC", whereas I actually have a D-Link DFE-538TX 10/100 adapter. Furthermore, I get no icons (at all) in the Network Communications window. So if I want to change any settings of my LAN, for example, I can't, because I can't select the LAN icon or right-click on it. The LAN is working though. The current driver for the Realtek adapter which is listed is a MS driver.
View 5 Replies View RelatedI just formatted my comp and re-installed XP. I had vista for awhile but I discovered that it sucks. I am using a custum built computer and i cant figure out if its the driver or what
View 14 Replies View RelatedWhile trying to upgrade from Windows 98SE to XP professional I get a compatibility message that says upgrade is blocked because my HPT366 ultra ATA/66 IDE controller is not compatible.Is there anything I can do, such as a driver upgrade?
View 4 Replies View RelatedI just installed a nexxtech 7 port 2.0 usb hub,and now when I use my printer up pops this"You must add a hi speed usb host controller to this p.c. to obtain max. speed." Can someone simplify what is necessary here. My cordless mouse,netmate link and printer are all that runs off of this usb hub. WXP/pro/sp2 800 mhz.
View 14 Replies View RelatedI am tring to install a USB serial cable to enable me to use com port devicse since my laptop doesnt have Com port device.I have the serial cable and any time i try to install it it asks for a soft ware to be installed, but i dont have the software.Can any body help me out to solve this problem plz? This is the spcification what i get from device managar+USB controll+Details.
View 6 Replies View RelatedI recently had a problem with the VUNDO Trojan on my XP PC. I removed it using MalwareBytes but it appears to have left a problem behind.
In my System, Device Manager, I have an entry for my SCSI and RAID Controllers called ACLGRWTP IDE Controller which is yellow flagged. I have uninstalled it but it always comes back and XP tries to install it to no avail.
Someone reinstalled Windows XP on my son's computer, and now it is not working properly, so I am trying to help get it fixed. I have limited experience with this sort of thing. The specs on the computer are as follows: Acer Aspire 5050-3371 AMD Turion 64 Mobile Technology MK-36 (2.0 Ghz 512 KB L2 cache) It will not connect to the internet, and when you check the Device Manager, it gives a yellow question mark under "Other devices". The other devices that have question marks
View 7 Replies View Relatedrequired the reloading of Windows XP professional on my factory-loaded laptop. I didn't have the CD, so I went to a shop and they did it. Since then, I've been getting this "new hardware" balloon when I start up, and it asks for file "el90Xbc5.SYS on ECD541DP90X". It asks for dwinxplan to load it from. Being CD'less, I've just cancelled it before. Now I'd like to work out how to deal with it can I get this file from somewhere
View 3 Replies View RelatedI recently purchased Madden 2005 for the pc, I have always used a PS2 controller with a adapter to use it on my pc, but now I am having problems configing it with my ps2 controller. My adapter came w/ just a driver no software. Is there any universal software that I could use that could possibly make it so I could revamp what keys are assigned to which button. If you buy a logitech controller, it comes w/ software to change which button is considered button "1" and "2" etc...Im looking for something like that, that you could use with this adapter, like I said something universal.
View 1 Replies View RelatedI've just bought a Lacie Porsche external harddisk 120GB if i connect it to a Windows XP Pro. SP2 / Desktop Small factor D500 1.7 Ghz PC the controller recognizes that a device has been connected but i cannot find it of my computer neither on the Disk management window.
View 1 Replies View RelatedI have a USB controller for some of my games, and I don't know how but after a while problems started to occur, and my controller would no long work properly so every time I booted up my PC I had to unplug it and plug it back into another port, and it would work. Now My controller doesn't work with any of the ports except 1, so now when I boot up the PC in order to use the controller I have to unplug and replug it into the usb port.
View 1 Replies View RelatedThis pc has been with me for a few months, no poblems at all. One day it just Bsods. Thinking it was just some random WinXP error, I restarted it and never thought of it again, until it happened AGAIN. 3rd times the charm, right? WRONG. After a few more I couldn't do anything basically. Boot > Bsod. So after a few Google searches and self troubleshooting later I got it almost sorted out. Also if I take this HDD to another computer it works fine. So, the problem seems to be my IDE controller. (atapi.sys) So I am requesting a place where I can find a clean atapi.sys and go replace it with the windows system recovery console. Also I am curently running a full system check for viruses on that working computer.Stuff that I have tried while trying to fix the bsod: Changing IDE cables, Resetting the bios/cmos reset, plugging it into the secondary IDE port, playing around with jumpers, replacing RAM sticks.
View 9 Replies View RelatedI Was wonering if any one could help me find a driver for a windows 2000pro. For some reason there is none there We are haveing trouble find the ethernet controller as shown here.If any one has any advic]e please let me know i cant seem to find it anywhere and i cant get onto the internet on that computer.
View 14 Replies View RelatedI have just reinstall my operating system and everything goes smoothly except that I found an yellow exclamation mark in 'NEC PCI to USB Open Host Controller' under Universal Serial Bus Controller.However when I turn off my PC,I encountered problem in swithing on again.I have to continuously press the startup button in order for it to boot again.Is that yellow exclamation mark the cause of this problem?If not,then what has happen to my PC?How do I get rid of that eclamation mark?I am running on windows XP Pro Serv.Pk2.
View 14 Replies View RelatedI need a driver for an Ethernet Controller for an Asus system board numbered PTGD-VX in a sony Viao model # PCV-A11L Running windows XP Pro. Asus's site has been down for a few daya nd I cant seem to find it any where. I will keep looking but if some one could point me in a good direction I would be grateful.
View 14 Replies View RelatedI have a windows xp service pack 2.My computer is a gateway.I have a Creative Sound Blaster PCI 128 And a Avance Audio Controller They both state that their enabled but not started. how do i start it?
View 10 Replies View RelatedI reinstalled windows xp. im missing my ethernet controller, multimedia audio controller, video controller (vga compatible). i'm using ASUS Motherboard model is P4 P800-VM. i lost my motherboadr cd. i have downloaded audio driver and VGA from ASUS site it works well. but i also tryed the LAN driver from ASUS site but it did not has setup files, so i dont have idea how to istall it. but i have downloaded different supposed drivers of Ethernet controller from various sites and installed in my PC but it did not work. As you can guess without my ethernet controller i have no internet acces plz help. Im using a Net cafe right now trying to fix my computer
View 8 Replies View RelatedWhen I go into Device Manager, under Network Adaptors, there is a question mark next to the Ethernet Controller. What do I need to do to get this up and running
View 6 Replies View RelatedI recently was reinstalling windows xp pro . after the fresh install i tried to connect to the internet nothing happened. went to the device manager and apparently the the PC wasn't reading the ethernet controller. so i went home to the dell support to download the necessary drivers needed. i even called dell to make sure i was doing the right thing. needless to say it still does not work... i opened up the CPU to try and find the actual name of the ethernet card and could not. there was a small metal box where you put the ethernet cable into. i did not see a card, yet i know there is one. sorry if I'm confusing. its a dell 8300 with no service code or service tag on it. i check inside and out
View 14 Replies View Related