Loaded a fresh install of Win 7 SP3 in a Compaq 5205us desktop. The net interface is recognized, the network connected symbol is there, but I get no access. The 5205us says it needs the ATM network controller.
View 7 Repliesa pc with windows xp pro suddenly started not to access the internet or the workgroup it normally worked on.
ethernet card is present in hardware devices, network connection says it "is there", the IP numbers etc. are all as they were.I have even tried a rollback to the time it worked fine, but no net
Hi,
I am running a computer with Windows XP, sp 1 and norton antivirus 2004. I had some bugs on the system Coolweb search or look to 2. Ran hijack and adaware. Went one step to far. I can not access the network or the internet. It worked till I messed with the lsp. Ran lsp fix and what is there is suppose to be. Any ideas, I ran system restore and deleted the network card, no luck, short of reloading windows xp, I am at a loss?
Thanks for any help, buddy is not very happy with me...
Sandra
My system specs: Win XP Home with SP1.I am having problems connecting to the internet from programs such as msn messenger, mozilla firefox,various ftp programs and updates.Only IE (6.0) and WindowsUpdate are the programs with internet access.When I try to ping on any IP address (except 127.0.0.1), I am getting the error 65:"PING: transmit failed, error code 65." At the time this problem started:
1. the computer had quite a few viruses on it (like DerBiz/Trojan.Win32.Dialer.gp).
2. we tried to install SP2, but it caused problems with ZoneAlarm and system became very slow. So we uninstalled it.
I'm trying to gain internet access on a wireless network from a PC without a wireless card through a laptop that has a wireless card using an ethernet cable in Windows XP but keep getting limited or no connectivity. It wont let me turn on internet connection sharing on the laptop because 192.168.0.1 is being used by the gateway, what can i do?
View 8 Replies View RelatedI am experiencing an odd problem. I have added my pc via a network card and cable to my son's computer. He has broadband access to the internet and the intention was for my pc to be able to share this access. However, I frequently find that my pc will not use the network system to connect to the internet but can only do it via dial up even though my sons's pc is permenantly on and connected. When it does use the network broadband works well.
View 4 Replies View RelatedI recently discovered that something is wrong with my wireless network in my home. Let me start by saying I am not real good with computers, just enough to be dangerous. It's been at least a year ago, but somehow I was able to get my network set up after I got help getting my wireless router (Linksys WRT54GS) set up. I have a desktop and a laptop. First off, I can get internet access on both machines, so I'm good there. The router is wired to the desktop and I connect to the internet wirelessly with the laptop. In layman's terms, here is how I would access my files on one machine from the other when things worked. Once I had the network set up I created a MY NETWORK PLACES shortcut on each machine.
Once opened I somehow created an icon for the folders on the other machine. How I did this I cannot remember. Now, the only tabs showing on the desktop for example are an tab for my router and everything I chose to share on the desktop; nothing for folders to be shared on the laptop like there was. However, right now that's the least of my problems because when I click the tab for VIEW WORKGROUP COMPUTERS I get an error message saying "Jonsnet (my network name) is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found." However, when I click MY NETWORK PLACES on the laptop and then VIEW WORKGROUP COMPUTERS I do see a tab for the laptop as well as the desktop, but when I click on the desktop tab I get said error as well.
i have problem in my computer can any one help me please this is my problem in the Image [[IMG][/IMG] what I must to do to fix this problem / my computer is toshiba and model is (tecra)
View 11 Replies View Relatedi just did a clean install on my laptop and upon checking device manager i encounter question sign for (1)Multimedia audio controll (2)Network controller and (3)PCI Modem.Isearch Toshiba site and they do not list my model computer and i have seen the AC97 audio driver elsewhere but it just wont work. Anyone care to point me in the right direction.System is Toshiba Satellite A55-psa50u-03c021, serial number 64094885H, Chipset i855GME. Sound card is AC97(82801db)
View 2 Replies View Relatedi have a problem with my network folder.It seems that I can't see my existing network connections in the folder! I first noticed this when i click on my dial-up connection the connection window won't come up.When i open the network connections folder in the control panel, an error message comes up with this message:The Network Connections Folder was unable to retrieve the lsit of Network adapters on your machine. Please make sure that the Network Connections service is enabled and running.
View 6 Replies View RelatedMy Winxp machine cannot access my home network or the internet. If I boot up in Safe mode I have network and internet access, but in regular mode my Nic card shows a limited connection error. The last thing I installed before the nic card stopped working was Symantec Antivirus corporate edtion over the network.
I have tried to remove it, but it needs the network to access the uninstall file. I also tried copying the uninstall file onto the computer and this did not work. And system restore will not work for whatever reason.
Anyone seen this before or have any ideas?
I have a wireless network with wep encryption yet my b-i-l waltzed in with
his sony and used my network to collect his emails.How is this possible.
Hello
Why would windows xp not find a computer-name, but it does find the ip address ?
Hey there,
I've got a Fijitsu Siemens Notebook,
I cannot access any wireless networks( The wireless is turned on),
I cannot access a network via a cat5 cable, but i do get assignes an ip address through dchp.
I cannot access the internet when using a usb wireless modem, even though it connects i cannot ping anything or surf any website.
The firewall is turned off
Please help!!
Afternoon all,
I am having a problem with my network connection. I have a computer on our corporate network that is attached to a gigabit backbone. When I try browse my network neighborhood, the refresh rate is extremely low. It takes 30 seconds just to expand the workgroup. Internet access is fine, I can surf the net with no problems at all.
I am going to try a new ethernet cable and check the drivers for my built in nic on my MOBO. Does anyone have anything else that they think I should check?
Joe
I have some difficulty when trying to access some computers on the network ( I have administrator privileges).
For example I can connect to the C drive on computer LRC-Q11 by clicking start -----> Run - typing \LRC-Q11c$ and pressing OK.
However when tring to access another computer even with a similar name eg LRC-Q012 I receive the message :
"LRC-Q012 is unavailable . You may not have sufficient rights to access this resource. LRC-Q012 path cannot be found"
Identical results are obtained using network neighbourhood.
I cannot understand this.
Suggestions please ?
I have 2 computers running Win XP. both of them on the same workgroup. From desktop computer i can access the laptop. but not the other way. if ping the desktop from the laptop i will get Request timed out. Any suggestion to solve the problem thanx
View 3 Replies View RelatedI am running WinXP on 4 computers connected together via a LAN using a LinkSys Cable Modem/Router. Each computer was set up to run on the same LAN. Each computer can "see" the Internet. 3 or the 4 computers can see each other and all shared drives and printer on each computer. But one computer, an IBMT40 laptop, consistently has trouble see other computers on the LAN and vice versa. This is a relatively recent problem. For more than a year the T40 ran across this network without any problems; then "network not available" started appearing once a week than once a day and now all the time. The T40 has no trouble seeing specific mapped drives on other computers (mapped before these problems started), but when I navigate through My Network Places | Entire Network | Microsoft Windows Network | LocalLAN, the T40 can see the network name (LOCALLAN) , but when I attempt to navigate further, I get an error message indicating that the LAN is not accessible and I probably do not have access permissions. I have rerun the Network setup wizard on the T40 several times. Everything seems to work, but when I attempt to access the LAN, same problem.
Also, the other 3 computers can see all shared drives on the T40.
Any help would be appreciated.
Hey guys,
Here is my problem
I have two PCs. One is having Win XP and another Win server 2003.
Now when i access any audio files from the server through XP it playbacks corrupted. It gets scrambled and gives weired high pitch sound....
How can i solve this problem? All other files i can access properly....no problem...
Thanx
After upgrading from NT 2000 to XP Pro and SP2 connot access network printers
.. They can be pinged so no connectivity problem.Tried deleting them then
cannot add.Search they show up but when try to add error says wrong printer
name or printer not online.One thread said to uninstall network card and
wireless card,but this is not a network problem.Local printer is O K.
Need help
I have a network running XP Home on 3 laptops and 1 desktop. All computers
can use the internet and printers fine. One laptop (IBM) can share files with
the desktop but the other 2 laptops (both the same make etc) give the error
"The user has not been granted the required login type at this computer" when
I try to access them from the desktop or the IBM laptop.
All the references to this error message say to go to Control
Panel>Administrative Tools>Local Settings but XP Home does not have this
option on any of my computers.
After long periods of my internet connection being idle (2+ hours usually), all programs requiring internet access are unable to connect. By idle I mean I leave to run some errands with no programs other than Zone Alarm running. My DSL modem still has all lights flashing and active. There are a couple other scenarios where this occurs as well. Ex. I'm playing WoW for extended periods but not using the internet through any other program, then upon alt-tabbing no other applications are able to connect to the internet even though WoW is still connected and functioning. Rebooting the router/modem doesn't fix it, but rebooting the comp does.
View 6 Replies View RelatedI think that I have a virus which is stopping me from 1) Installing Norton Internet Security 2005 properly, and 2) Stopping me from accessing all anti-virus related sites, for example - www.symantec.com, ww.grisoft.com, www.pandasoftware.com, and when i tried to download AVG 6.0 from another site which was unrelated to antivirus, I found that I could access the site but the download failed.
View 2 Replies View RelatedI now cannot access my wireless network in the house. I have a Linksys WRT54G router. The Int, WLAN & Ethernet lights are on. When I get into the home internet connections "details" on my HP, it states "acquiring IP address" and list all 0 (zeros.)
View 3 Replies View RelatedI have a laptop here running XP Pro that can login to the network, process/run login scripts, access the internet, mail servers, shared drives and other various network resources however the laptop in question cannot be pinged, accessed or otherwise be seen on the network (i.e.: \LaptopShare$, \IP.ADD.RE.SSShare$; ping IP or host = request timed out) The routing tables look fine, it is authenticating as it should, we've tried two different subnets, releasing and renewing the IP, even used a hard coded IP but the machine could not be pinged or otherwise accessed. I thought maybe the TCP/IP stack might've been corrupted some how so I removed all of the protocols and clients for that NIC however TCP/IP would not disappear from the list. I removed the device from device manager and upon Windows reinstalling the device, after a reboot of course, there was no change. Aside from reimaging the machine, what else do you suggest I try.
View 8 Replies View Related1. There is no icon that says the internet is connected in my system tray, even though it is.
2. I can access the Network Connections folder, but there is no connections displayed.
3. When i got to click 'change windows firewall settings' i get an error : Due to an unidentified problem, Windows cannot display Windows Firewall Settings'.
4. I cant access services.msc, get the following error message: Unable to open service control manager database on.
Can a Windows 2003 Domain Controller communicate with a Windows 2000 Domain Controller? The reason I ask this is that I want to upgrade my Domain Contoller to Windows 2003, but want to have the backup Windows 2000 machine running as a backup Domain Controller.
View 1 Replies View Relatedmozilla firefox can access the internet just fine but internet explorer refuses. any ideas? i don't have proxy server or anything of the like.
View 2 Replies View Relatedi recently uninstalled norton (had enough of it) and installed etrust armor now i can onlay access the internet using internet explorer ?
View 13 Replies View Relatedcomputer in my possession crashed, and when i reset, my internet has gone wonky. I use MSN as my ISP, and before, i could access internet explorer, or firefox, or any program without ever actually having to sign in to MSN. after the crash, however, i now have to sign in to access internet explorer, firefox, and a couple programs. what angers me, however, is that i DONT have to sign in to access trillian. Limewire, also, will connect, but wont download anything without msn being logged in. How do i get back to how it was? And no, system restore did not work.
View 1 Replies View RelatedWhen I try to access my desktop from my laptop and desktop to laptop, I keep getting a message that says that I do not have access permissions to network resources. I set up my network, enabled file/printer sharing, and configured firewalls to allow the network. My network has been working fine for about a year now until just recently. (I didn't install anything new, and I keep both computers updated everyday.)
View 1 Replies View Related