I have a new Compaq SR1520NX computer with windows XP and 512MB.
At startup, the Compaq boot screen ( boot, setup, system recovery) options. appears and hangs there for 4 minutes before windows welcome screen loads.
I have tried using msconfig and went through and unchecked everything, just to see. Still have same problem. I contacted HP, however they could offer no help.
I added a 512mb stick and 500gb hard drive to an AMD 1.7mhz system that was running fine but just out of disk space (figured as long as the chassis was open to throw in the ram too). Now I can barely use the darn thing. Runs extremely slow. Audio and video and useless, responses are crazy - even the mouse is herky-jerky. Went into taskmanager and there is one program that seems to be using a lot of processor time but I alway have that one running even in the 'old' configuration. I can kill it and it helps a little bit but why should more resources make things worse. I have AVG running for virus checking and regularly run adaware and spybot for malware checking. Checked system settings and everything looks fine there as well - cache, VM, performance, etc. all set to normal levels (768mb by the way).
View 7 Replies View RelatedI'm having a 512MB RAM,but when i check it in my system properties it's showing 448MB RAM,below that its written PHYSICAL ADDRESS EXTENSION.But when i check it BIOS screen its showing 512MB RAM.
View 6 Replies View RelatedI was just wondering if i put windows xp 64bit to a system with dual core 64bit cpu and 512mb of ram, will i see any difference in the page file usage in comparison to windows xp 32bit
View 4 Replies View RelatedI am looking to add extra memory to my computer for music purposes, what should I get I am after an extra 512mb of memory.
View 7 Replies View Relatedgame attending in slow motion every approximate 5minutes after that it is normal.
View 2 Replies View RelatedMy computer was working fine this morning, I didn't download anything or do anything different, just normal web searching. As I'm loading a web page, the computer freezes. I Cntrl Alt Dlt and nothing, so I turn off my computer and turn in back on, it reboots to the Win screen where you sign in as an identity, I enter my password and it freezes. Again, I have to reboot the computer manually, and it freezes at the Compaq screen that comes on when you first turn on the computer. I turned off the comp, opened it, removed my fan, blew it out a bit, removed the processor and reseated it (in the process, reseated it incorrectly and bent a far corner prong, attempted to straighten w/tweezers, and ultimately BROKE it off...DOH!). I wasn't sure if the broken prong would have a big effect, so I reseated it correctly, reseated my memory, and tried again, same thing, just hangs at the Compaq screen
View 10 Replies View RelatedA friend of mine has a compaq pressario with winxp service pack 1 and it has started acting very strange.on the shutdown menu the only buttons that appear are to log off user or change user there is no turn off or restart buttons.We restored the system to the last good state and that fixed the problem but aftre about 15 minutes or so the same thing happened all over again. When it does this her programs als will not respond. You can open a couple of them by right clicking and selecting open but even like that most of them show the hourglass for a few seconds and then nothing.I had her boot into safe mode and do a scan with her norton software and although there were a couple cases of adware that we knew about ahead of time there wre no real infections.
View 8 Replies View RelatedMY BOOT SEQUENCE IS ALL OUTTA ORDER AND IT WONT BOOT HELP
View 1 Replies View RelatedI'm running Windows XP SP3 with everything up to date as far as I know. I have the complete set of my PC's OEM Disks that I've used once when my OS was completely messed up, had Geeks Rescue out and they couldn't figure out what was wrong, so I know what they are for.What I'm not understanding are the several tools I'm afraid to open listed in my "Start"/"All Programs" I have both "Compaq"/"Compaq Presario PC Tools" with "Compaq Application Recovery"/"Compaq Recovery CD-DVD Creator"/"Compaq Recovery Tools CD"/"Compaq Support Information"/"Compaq System Recovery"/"Remote Assistance"/"Safety and Comfort Guide"
View 6 Replies View RelatedI hope I have the right Forum Need some expert adv pls.Found a old COMPAQ 1750/6400/T/10000/D/M/1 of my buddy which had a WIN 98 on it. A badly corrupted OS, it just would not start at all.So to get some experience I decided to install WIN XP PRO, it was done successfully. Unfort there was no way I could make a back up of the drivers, but thats OK, its fun to play around with it.Now maybe some1 can adv how should I go ahead to get the WIN XP going now ? Do not have any BIOS either on my system(as far as I can see)!!
View 6 Replies View RelatedCompaq Presario 5000. Hard Drive failed, replaced hard drive and now Win XP Quick Restore Cd's that came with this PC won't load on new Hard Drive. Instead, I just get a red screen with ERROR and says to contact Compaq for support. I'm assuming something is "missing" that allows the Quick Restore to be "ok" with loading. I've formatted the Hard Drive.
View 5 Replies View Relatedi need to buy a compaq quickrestore cd. ive been looking online and they seem pretty hard to find. i found one website that might work but im not sure(restoredisks.com). also, i found somewhere that there was some type of settlement with compaq and that i might be able to get a quick restore cd for free through https://www.orderz.com/qrcons/page1.asp i have my serial number on the side of my computer so everything would be legit. if worst comes to worst i might just call up compaq tech support and try and buy one from them but im not sure how much that would cost.
View 10 Replies View RelatedHi, my mates pc has died and I have been trying to install XP Home onto a new hard drive for him. I have got a legit copy of XP of my own which I have installed on his H/D with all the latest updates and which is running fine on my backup PC, and will boot in my main PC.
When I try to boot up on my mates PC all I get is the Safe Mode , Last Good Configuration etc. screen and no matter which option I choose it keeps coming back to this screen.
THis dang laptop is frustrating the heck out of me!!!!! I have a couple issues going. Sometimes when I boot up, it goes to the desktop then randomly either reboots on its own or freezes to the point that I have to use th power to shut down as Ctrl-Alt-Del does NOTHING!
Here lately another issue has been more frequent in that I can't boot up at all! I was able to get on the HP site today (once) and it suggested reseting the RAM so did that...no luck...the battery works when it's charged, so eliminated that. I have 2 AC adapters that are fairly new so shouldn't be that I think. What it's doing now is when I power on, the power LED doesn't come on. THe hard drive is solid green, then the battery is solid yellow, then the green goes out, then the yellow goes out and nothing. Through this whole process, the screen is black.
I am wondering why my programs hangs up a lot. im running a compaq presario, wix xp, 2.5gig processor, 784mb of memory.
View 1 Replies View RelatedI have a Compaq Presario s5200nx, with 512kb ram, 2.7 ghz Celeron processor, and now a 120 gb Western Digital hard drive. I took the original hard drive (120gb Samsung), which had windows xp installed and running fine, out and put it into a newer computer I built. I installed the 120 gb WD drive in (which also had a running version of XP installed on it) and it wouldn't boot. I then tried putting my windows xp cd in to reformat and reinstall, but everytime, it loads up, and then just says at the bottom "Starting Windows" and freezes at this. I then tried using the recovery cds that were made from this computer and put the first one it, It just gets to a screen that says "Compaq Recovery" and freezes at this. Next I took some "Quick Restore" cds I had from an older laptop and put those in. Everything seemed to be working fine until I got to the end where an error saying "Memory Error" came up, and the PC still wouldnt boot. I have tested the hard drive on other computers, works fine, as well as ran Western Digital's Diagnostics on it, which showed no errors.
View 8 Replies View Relatedi have a compaq presario sr1620nx with windows xp. one day the computer worked fine and the next it does not. the problem: on start up the computer does not progress past the "Compaq" screen. there are no lights on the keyboard so pressing F8 or F10 or ESC does not do anything. Everything is hooked up properly so it is not a power problem.
View 3 Replies View RelatedI would like to know how to backup my files in my Compaq PC which uses Windows XP.
View 2 Replies View Relateda few months new Compaq Presario SR 1500NX AMD Sempron freezes after a few minutes of use. maybe like 10-15 mins max, then just freezes and nothing works.i dont think its ram cuz i tried another ram stick thats 512 mb and its the same thing! i dont get it, how do i find out what the problem is?
View 2 Replies View RelatedCompaq will not start. It gets to the welcome screen, where you press F1 for Setup F10 for System recovery, but nothing else is happening. I have tried to get into both Set up and recovery with no results. I have also tried safe mode, but nothing happens.
View 1 Replies View RelatedI have a Compaq Presario 5000 with 192M of RAM, 866MHz, and 40G HD. It had Windows Me loaded on it, and I tried installing W2K, but it didn't work. Here is the error message that I get: couldn't open drive multi(0) disk(0) rdisk(0) partition(1)
NTLDR: couldn't open drive multi(0) disk(0) rdisk(0) partition(1) As some of you suggested in other potings, I made sure that the boot from CD was the first option in BIOS. I tried installing Windows 98. NT4, 2000, and XP using bootable CDs and startup disks but didn't get anywhere. I booted in DOS and formatted the HD and used different partitions sizes and formatted them in FAT and NTFS, and I still got the same result. The cable is connected properly to the HD and there are no apparent damage/problem with anything inside. Linux works like a champ on it, but windows doesn't.
I have a Compaq Presario 3045US that freezes on occasion for no apparent reason. Mouse, keyboard will not function, unable to shut down, have to pull power and reboot. Don't get any error message and no repeatable process although watching dvds does seem to cause it to happen more often.
View 2 Replies View Relatedmy laptop doesnt open to windows there is a message on top of the screen NTLDR is missing below is a message to press Ctrl+Alt+Del to restart but when i try this it doest work.
View 1 Replies View RelatedI have Compaq laptop which has 512 meg ram shared so technically i get 300 meg. it came with windows xp home edition. also it has 100+ programs that compaq decided to load it making it even slow.It also have backup harddrive partition and i created backup dvd's. the problem is if i reformat it using those then all the bloatware will be installed again. which i dont want.I have also got a copy of windows xp. what id like to do is format the computer using a plain windows xp cd. my question are these: would the product key on the back of the laptop work with the xp cd that i have.AND how do i backup the drivers that i would need from the laptop?
View 3 Replies View Relatedi just want to ask how much if i swap my compaq to hp pavilion
View 1 Replies View Relatedhow to to re install windows xp in hp compaq 6720s
View 1 Replies View RelatedI've had this Compaq since 2004. I've added a gig of RAM, a 250gb SATA HDD, and a 6600GT card.
Anyway, I want to do a clean install of XP, which I've never done. I've cleared a bunch of space on my 250gb HD and transfered all the files im going to keep from C: to the 250gb.
So my question is what will happen to my 250gb drive? Do I have to disconnect it? Will XP recognize it after the clean install? What about the extra RAM and 6600gt?
when a memory failure corrupted the OS. Compaq runs its setup from a special partition on the HD and Ive reloaded all of that from floppies. Setup says I have a 26.2GB HD but it is 60GB, otherwise all tests pass. In setup under storage the help file says I can select the boot sequence but I cant seem to find anyway to do this?? Id like to boot from the Win 2000 CD, I did make a boot floppy set from the 2000 CD but it dies on disk2 with a "isapnp.sys corrupt". Downloaded another makeboot.exe diskette set and get the same message. The original OS starts to load off the HD but stops with an error message and only allows a reboot. Can I move this HD to a slave on an XP system and load 2000 that way and then move back and configure the different hardware? Or just boot from the CD on my other PC and install
View 4 Replies View RelatedI have a Compaq S4120WM with Windows XP Home. I would like to be able to copy the restore information from the D Partition to a DVD so I can restore should I lose the drive. I can simply burn the info to the disk but how would I start the restore process
View 3 Replies View RelatedHello,can i burn Free compaq restore disk
View 1 Replies View Related