I own a HP Pavillion 7955 and run Windows XP. My system was running perfectly until I downloaded the latest version of Ad-Aware SE Personal and ran it. After it ran my system lost all the information pertaining to the CDRW or DVD drives, they vanished into thin air! I used the restore feature to undelete what adware found but I still I can not find the drives. I tried to use the "go back" feature but that does not does not work! The CDRW drive is an HP, P/n 5185-4863 and the DVD is a Samsung SD-616 DVDMaster 16e. How can I restore my system after running your adware software besides having to reinstall all of my programs.
Windows XP Home, version 2002, SP2. Windows explorer will not find files that I can navigate to. Since I can navigate to them I know they exist. I'm looking for heart rate monitor files using .hrm as the search term and WE says it can't find any files. I can go to C:/program files etc. and get to the files. File formats are xxxxxx.hrm, with xxxxxx being the date. Searching for .hrm on my laptop finds all of the files with no problem.
My laptop computer is too full and I would like to delete some items. I have Windows XP on both computers. I have done a disk clean up, but there still seems to be files showing there. Also, I compared the "Add or Remove Programs" screen between my laptop and my desktop computer. There are some items on my laptop that are not on my desktop. Can I delete any of them. For instance,(1) MSN Messenger 7.0(2) Search Enhancements (remove only)(3) Windows Installeder 3.1 (KB893803)(4) Client ToolsAlso, on this list I have listed (1) Adobe Flash Player 9 Active X; (2) Adobe Reader 7.1.0; and (3) Adobe Shockwave Player. The Adobe Shockwave Player is not on my Desktop. Can I delete it on my laptop without affecting the above program.
recently we had power failure and when I turned my computer back on, my bios came up.I tryed to exit out but some how disconnected or turned off my second hard drive and can not get it to go in the active state again, how do I check for the missing letter E that the drive is on orfind access to this drive
I use Windows XP Professional OS on an Intel Pentium 4 PC with 512 MB RAM. Presently I have a single disk drive of 40 MB which has been divided into three logical drives C, D and E with total sizes of 20, 10 and 10 MB respectively. I now want to add a second disk of 80 MB capacity and would like to increase the total size of the three existing logical drives to 40 MB each.Is there a feature available in Windows XP that will permit me to do this without having to reformat the existing 40 MB disk drive ?I have certain software installed in the PC for which the setup files are not available. Reformatting the existing disk drive will result in the loss of these applications. I would also not like to add more logical drives i.e. F, G, H etc.
Windows XP home cannot find 2nd hard drive, it does not show up in disk management. It does show up in the bios.At one point it did show up, healthy formatted NTFS drive.I was able to add a fileafter that it was gone.I have one user account, and GUEST account.I checked permissions and set them all to enable.
I have a hard drive which was part of a dual drive dual boot system. Windows XP and linux.
However now that I have removed the Linux drive from my computer and no longer have access to it when I try to boot my XP drive I recieve a GRUB Hard Drive Error.
I asume that my MBR is trying to find the second drive and loading properly but I am not sure how to fix it.
I have a Win xp sp2 machine that will no longer boot. After bios, a win 98 boot screen appears (very similar to a 98 boot floppy screen), asking to make a choice: safe mode is one, and when it is selected, it complains about not finding several windows files: C:windowshimem.sys, dblbuff.sys and ifshlp.sys. Is there a recovery mode for existing installations? Can I reinstall XP SP2 on top of the existing OS and have it preserve everything?
Lenovo Thinkpad x60 Tablet---Windows XP SP2I have 93GB's of usable space on the HD. Approx 10Gb show up as free when I right click the C drive and go to properties. My folders on the C Drive total approx. 45GB. I've both right clicked on the folders and used TreeSizer to get this total. I've checked diskmanagement and the drive is not partitioned.
In lieu of non payment of an invoice I have been given an IBM R50e with XP Pro installed. The big problem is that I cannot log on due to no details of the existing Password that has been set up. how to overcome this? I have no software discs and really want to keep the installed software as its all legit.
I am going to be building a new rig sometime in the future and I have an existing install of XP on my current HDD. I plan on buying a new much larger HDD for a fresh install of XP with my new rig. Now I plan on keeping my old HDD but dont have anywhere to back up the data currently on it when I get my new rig.Once I get the OS intalled on the new drive I want to move the stuff I want to keep from my old drive to the new one then reformat the old drive to clear it all up. The new HDD will be a SATA while my old one is IDE, should I wait to plug in my old IDE HDD until after I get my OS intsalled on the new HDD? Or can I plug them both in and set the SATA drive to be the boot drive in BIOS and then do what I need to do with my old drive after installing the OS on the new drive? And lastly if I chose the former and intstall my old IDE drive after the OS on the new HDD will the fact that I have an existing OS install on the IDE drive mess anything up on the boot up after I install the old drive to move what I need to move to the new drive?
I have a Dell Dimension Desktop that became infected with a pretty nasty virus. I have had to remove the infected HD from the machine. Instead of trashing the machine, I would like to just purchase an entirely new HD for this machine. I am guessing that when purchasing a new HD that it does NOT already come with an O/S already installed. If this guess is correct, my question is this:Can I use the original O/S Reinstallation CD that came with the machine to get the O/S installed on the new HD? ORDo I have to purchase the O/S along with the new internal HD? If more information is needed before an answer can be provided, please let me know what is needed.
When i first got my computer the drive worked fine, but since the first time i opened it, It stopped working. Anyway I found the problem (the cable had been damaged) and now the computer can see it but cant find any drivers for it.Under drive properties it says the drivers are not installed code 28 I dont know the manufacturer of it either, the properties just say standard CD-ROM Drive
I've installed Win XP on a new drive and am now using my old boot drive as a slave, which I will now use for backup. Before I format my old drive and wipe it clean, I would like to copy the files from My Documents on the old drive and save them to my new drive. But I can't find those files on the old drive. Where is the My Documents folder on that drive?
I just purchased a new hard drive and when I boot to the XP Pro CD I press Enter to install XP but I get the following screen. "Setup did not find any hard disk drives installed in your computer". This is the only hard drive in the system. When it first boots up I see Award Modular BIOS v6.00PG then it detects the Main Processor then detects IDE Drives GigaRAID BIOS V1.36 F/W Ver 02093030 it detects the new hard drive in Drive 1 - IDE 1 then siI 3112A SATALink Host Controller Bios Version 4.2.00 It doesnt find a primary drive
I can't find my Flash Drive icon in My Computer, but I can find it in Disk Management as H drive.A search in Google and it said that to change the drive letter/path to K or higher will be alright but I changed from K to the higher one at a time, still can't find the flash drive icon in My Computer.
I recently had Spyware on my computer, after I deleted it and rebooted the error message came up <windows root> system32hal.dll. missing ! I tried to reboot using the recovery console on the windows CD but windows cannot find the Sata hard drive at all So I cant use the CD to reinstall windows over existing windows either I have access to another system, without a floppy drive but not sure what the best method of solving this problem is...Dont want to reformat as I have things on the H/D I need, I know I should have backed up...unfortunately I didnt, wont happen again though, lesson well and truly learned
I have been searching this site for possible threads relating to my problem, but couldn't find it. I apologize if I am redundant. Windows wont boot suddenly. It had worked fine for a long time till now. It shows the Windows XP logo, but wont show the user names to log in. I tried to boot from the windows XP CD, but when it tries to fix problems, a message appears saying that Windows couldn't find a hard drive. I checked my hard drive and its perfectly connected.
When I go into Computer Management and click on Disk Management, all I have is my hard disk which is a primary partition. I can't find a way for my computer to allow me to partition the drive even PartitionMagic can't do it for me.
I decided to reinstall my windows xp formatting hard drive but after it asks me to agree with the license agreements it says windows could not find a hard drive in your computer.windows cannot continue setup press F3 to quit.so can someone tell me how do i resolve the hard drive problem?I have ASRock 775VM8 mobo Western Digital SATA 160 gigs and pentium 4 3.06 ghz.
Using Win XP. Downloaded the Beta version of software. After several days of trouble, decided to remove the program, AVG Antivirus. After removing using Add/Remove and restarting my computer, I did a file search and found many files still existing on my hard drive,primarily in C:Program files and other places My first thought was to delete these files. Then, I thought I had better check with you guys first.
I recently added a new sound card to my old computer. I have had this computer for nearly 3 years with zero problems. I installed a new sound card and installed the drivers. I now get through the mobo boot screen, then blackness, no BSoD, no Windows splash screen, nothing, just black. The computer is continuing to send a signal because the monitor does not go into power saving mode, but nothing happens after that. I've gone into BIOS and it is recognizing my HDD and my CD-ROM. I have tried booting from the disk, but the same thing happens, and yes, this is a legit copy made by MS.
Lost XP CD during a move and I have purchased a NEW XP. What must I do to replace the existing XP so I can establish a recovery bootable CD and registry my NEW XP CD.
I use two hard drives, a smaller one that runs XP and a larger one for primarily storage. I replaced the storage drive...this had been the "first" drive and was labeled c: while the one running XP was labeled d:I installed the new drive and rebooted. In the process, the volume labels flipped: the primary drive became c: and the storage drive becoming d: This has thrown Windows into a world of confusion and all previously installed programs show up as uninstalled. They are still there in "program files" but many of them refuse to open, reporting not being able to find .dll files which I can search for and find on the computer.
I've been trying to install Windows XP on a HP Compaq 6710b. It's my friends laptop, it shipped with Vista and she hates it so I'm giving her one of my copies of XP to use, because I'm so nice and whatnot. It boots into Windows Setup, checks everything, and then tells me that it can't find a hard drive for it to install Windows on, and the only option is to press F3 to restart. Is there some step I'm missing to turn on the hard drive before I install? Is this a problem with HP products, or have I just forgot to press some button?
I have a dell laptop with windows media center installed, as you know they come with a seperate partition for the backup files. For me backup files are not necessary, so I deleted the contents then installed WOW in its spot. Then later on I decided to merge this partition using partition magic. While merging my computer crashed. My C: drive is saying that it has the contents of the old partition, but it is not accessible or visible. I tried using partition magics drive mapper to make these files go into c: but it did nothing.
I'm can't get WinXP installation to find my Sata Hard-drive. I'm running Suse Linux on my IDE-HD and I could also had no problems getting my Suse 10.1 installation to install on the SATA-HD. I've booted up with winxp media install disk and tried to use the F6 key at the right time but nothing happens so it keeps going until I get to the point where I can press the S key to install SATA RAID driver from disk that came with my motherboard. The drivers install but then windows install still says no disk to install windows... I don't get it.
I've checked my bios and SATA in there, in fact the first thing I see when I boot up in the boot sequence is the SATA drive. Linux knows it's there but windows install doesn't. I installed XP on a WD SATA drive before and all I had to do was press F6 to install the controller from the XP disk but that doesn't work now.
Cannot reformat it, because it's the only hard drive with my information left on it. The one it came from was totalled and there's no way to back it up.On startup, it recognizes that the hard drive is in. But it doesn't show up on My Computer.
i have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP . well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
