CD On A Net Book Rom Drive
Jul 25, 2009
I have an ASUS EEE PC 900 that takes almost three miutes to boot to the desktop. I have unchecked almost everything in msconfig and it doesnt make a difference. This Laptop had ALOT of viruses and infections. I would have loved to do a clean OS install but it does not have a cd-rom drive and I would have to make a bootable USB key. Does anyone have any ideas on how to make a Windows XP cd emulate on one of these? I tried to mount one in daemon tools so that I could run sfc /scannow to fix any dead .dlls but it would not see the CD.
View 8 Replies
ADVERTISEMENT
Apr 8, 2005
Before I did a complete restore of windows home edition, I copied my windows address book to a floppy disk. Now when I go to copy the floppy back to windows address book an error occurs and it won't copy. could it have something to do with a mark that looks like this~.
View 1 Replies
View Related
Aug 18, 2005
When I tried installing XP Pro as an upgrade from Windows 2000, it almost
finished the install (34 minutes left) when the computer turned itself off.
This happened several times. I removed the hard drive and reformatted it -
cleaned it off, then reinstalled it. Now when the PC boots up it recognizes
the CD Rom drivs but it will not boot or install from the CD ROM drive. I
created the 6 diskettes to tell the PC to install from the CD Rom drive, and
it gives me an I/O error. The BIOS says to boot off the CD ROM drive but it
won't. What might cause this? A bad hard drive? A bad motherboard?
View 6 Replies
View Related
Aug 9, 2005
A friend wishes to change the name he uses when sending email and although
he changed the name listed in his address book, everytime he sends an email
his previous name still appears.I told him to delete the complete entry for his address and reinstate itwith his new name.He did this but the old name still appears on his email when sending
View 6 Replies
View Related
Apr 18, 2006
Recently, my windows address book (Documents & Settings/User/Apps/Microsoft/Address Book) has stopped working on my Windows XP SP2 desktop. The *.wab file is in the proper place and is of the right size but when I open it using Outlook Express or simply by clicking on the file itself, it opens empty and, at the same time, creates a new file name in the Address Book folder which uses the first 6 letters of the actual file name. On this same computer, with another address book, this shortened file name does not appear and the address file opens properly. It only occurs with one particular address book file.
Assuming the *.wab file was corrupted, I copied in a backup file to replace the corrupted address book file. The backup was made at a time when the address book was working properly. Unfortunately, the backup file demonstrated the same behavior, opening empty and showing the shortened file name.I then copied the original address book and the backup copy to another computer and found they both opened empty and both created the 2nd file name. On that same computer, other address book files open properly.At this point, an address book file, from my backup, which was working fine at the time the backup was made now fails and does so on two different computers.Other address book files open normally on both computers.I am at a loss and do not know how to recover the contents of the original address file.
View 6 Replies
View Related
May 29, 2010
I can't get my samsung n110 netbook to hibernate. It always would work perfectly fine. Today (this just started today) it wouldn't go into hibernate. Instead it would just stay on. Typically, closing the screen would send it to hibernation mode, but it won't do that anymore. So I went to start>turn off computer. Held shift, and clicked hibernate. The windows screen came up, and said "Preparing to hibernate". It stayed on that screen for around 3 seconds, then just went back to the desktop, as if nothing happened. I read in multiple places to disable hibernation, restart, enable it again, then try again. I tried that, and it didn't work. Any idea on how this can be fixed? Keep in mind, standby works perfectly fine.
View 1 Replies
View Related
Dec 26, 2009
I received a Gateway Lt Netbook. This is kind of just a cheap computer to us till I go off to college (in two-years). Then I'm getting a macbook pro or hopefully one of the mac products. Even though this is just a computer to use till then. I want to back this up, my family's external harddrive is full though. I was wondering if I could back up my xp netbook to an 8gb flashdrive? Also, could someone tell me how to do this (I'm use to press the button and it backs everything up). If I need a program, preferably freeware or cheap, but I want something that works. If I really need to I will splurge on it, it just I am tight on cash right now.
View 2 Replies
View Related
Jul 8, 2010
My netbook has disk error how to solve it?
View 1 Replies
View Related
Jan 20, 2008
I have a 1tb My Book Premium II drive. I'm accessing the drive through Windows XP Media Edition 2004. The External HD is connected via USB (I don't have Firewire or Firewire 2.0 on my laptop.) I have had little to no issues with this external hd, and have previously used the 160 gig version for over 2 years. I've got 550gb free meaning I've used it quite a bit. The 1tb drive is around 6 months old so far and I've got two complaints vs no solution.My files are sorted in the external hd similar to Window's. I have a Main folder, several categories of folders, then more folders within each... I archive lots of music, some videos, personal documents, and tons of pictures.I have been downloading various files directly to my hd, keeping my 160 gb laptop's hd clear of various files (Is this a bad idea??)
I use SoulSeek and Azeurus - both of which are compatible with Windows and tweaked appropriately. I attempt to access the files from My Computer and frequently experience an Explorer Crash. The severity is varying generally the Dr.Watson debugger will crash along with explorer... and on other occasions, I get no warning pop-up at all. I'm at a complete loss as to why this occurs. I can access the files with the download program(s) running, as well as closed both resulting with a crash. I have attempted to view the files through Mozilla and IE, both work properly, but it's an inconvenience.Anyone have similar problems? I have not found this exact issue on other forums... but I'm getting the picture WD drives do have problems.
View 17 Replies
View Related
Apr 7, 2008
Recently my computer crashed and I had to re-install everything. I imported my contacts back into outlook but now when I click on the To: or the address book I get a message. However when I click on the contacts on the left side they are all showing.
View 13 Replies
View Related
Apr 7, 2010
Hi I was wondering if it possible to block face book chat from my computer but still access the site.
View 7 Replies
View Related
Sep 4, 2005
When I try to export my address book from OE to a cd I get the message: You do not have permission to save this directory.See the administrator for permission.Seeing that I am the recorded administrator, does anyone know of certain settings that prevent me from exporting the address book even though I am the administrator.
View 6 Replies
View Related
Dec 26, 2007
I have an HP OmniBook XE3 with 256MB of ram a 1GHz Celeron Processor running Windows Xp Home.Everything was working ok on it until today.This laptop will not allow me to:Boot using a floppy discBoot into safe modBoot from CD.
Change the boot order.Enter BIOS Set-Up It has been working fine until today. When the system begins to boot I can hear the CD start to spin then quit. I have tried to change the boot order by hitting ESC button with no luck it looks like it is showing POST test with ?ATA CDmrom SCRm2t2???????) as the last item in the list. When I hit F2 to enter the BIOS setup all I see is ?Entering SETUP?.? And it never loads past tha
View 7 Replies
View Related
Dec 28, 2005
Unable to access the import and export options in the file menu of the address book and not sure if this makes any difference.
View 11 Replies
View Related
Jul 3, 2010
Want to buy a newer net book with Win7 and swap my old Hard Disk into it. The old Hard Disk has XP Sp2. will it work? For some reason, mfr are limiting XP OS to the same machine with only 1GB. if you config the PC to have 3GB, they say you have to upgrade the OS.
View 16 Replies
View Related
Sep 4, 2007
created an identity on Windows XP for each of my parents. Tried to set it up where Outlook Express could be used identically from both identities,but could not. Used the Import/Export from OE to attempt to send the address book and messages to other identity, and now they aren't found in either identity's OE program. When I tried to import the address book back into main identity's OE, an error message stated that it won't retrieve that folder
View 1 Replies
View Related
May 6, 2010
I keep my OS and data on separate drives, so all of my emails are still there, my account settings and address book should be as well. Importing everything into the new install of Firefox was a piece of cake. Everything, even the last sites I had open, imported without any issues. Outlook Express is proving more ... annoying. Microsoft's support site explains how to create new profiles, switch between those new profiles... none of which I need to do. I need to import my old Identity, from my data drive, into Outlook Express 6. I don't mean import the messages (there's not even room for them on the new partition), I just need to link the existing identity on the data drive to the new XP / Outlook Express installation.
View 4 Replies
View Related
Jul 21, 2005
I am trying to reinstall Address Book from a backup CD. I get the following message when I click on Address Book in the backup CD. "The Address Book file has been locked by another application. Please close other application and try again." I don't know what application the note os refering to.
View 11 Replies
View Related
Apr 14, 2005
a message keeps popping up saying the following: Cannot load dialog. Error 623: The system could not find the phone book entry for this connection. All I can do is click the close button and it goes away and nothing else seems to happen, but it pops up again in a few minutes.
View 1 Replies
View Related
Jan 31, 2008
Today I noticed that what WAS my E drive is now called F and what was my F drive is now called G. I don't know how it happened, but it's wreaking havoc with Adobe Premiere because on all old projects I have to relocate all files on what were F that are now on G. It's also messing up my shortcuts.
View 6 Replies
View Related
Sep 22, 2010
I am try to two partition drive C and drive D in my computer but only one c or d instoling. i have 4000mb hardrive,please tell me how can i instol partition in my window xp professional.
View 1 Replies
View Related
Jul 11, 2005
I had to buy a new Hard drive and installed it into my computer.also have a slave drive that is much smaller. the slave drive has always been drive e: or drive d:. But for some reason after I re-installed windows and ran it, it now made my slave drive into drive c: and my master drive into drive e:! How do I switch the two? The slave master is set up properly in the BIOS. The large drive is the master and the small drive is the slave. But how do I assign the c:designation to the large drive and the e: designation to the small slave drive.
View 2 Replies
View Related
Apr 1, 2010
When installing a larger main drive, how do I get the drivers copied onto the slave before I take out the main one I wonder is there a simple way of doing this, I am using Windows XP home edition, the PC is an oldish one and isn't any specific make, so I can't get any clever programs from the manufacturers site
View 3 Replies
View Related
Aug 6, 2005
I use Cobian Backup to produce a zip-file containing all files and folders, except for temporary-folders (I added an exclude-filter), of my system.Before I can rely on this method, I need to find a way of restoring the 27 gb zip-file, which I store on a networked drive, easily. how booting up a laptop with a formatted harddrive, be able to access a network-drive and extract all the contents of the networked zip-file to the hard drive?
View 14 Replies
View Related
Aug 3, 2005
My office has a number of mapped network drives for each user which, unfortunately, start at drive letter F.Each time a USB device is used on the computer it is also automatically assigned the drive letter F (presuming that C is hard disk and D and E are CD/DVD drives). This has to be manually changed from within Disk Management.Apparently this is as a result of physical drives taking precedent over the mapped network drives.Is there any workaround for this other than moving the mapped drive letters further along in the alphabet? - this is not really a feasible solution at this time.
View 4 Replies
View Related
Dec 20, 2008
A little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
View 7 Replies
View Related
Oct 2, 2006
A friend gave me a laptop, my problem is that it came from Japan thus everything is japanase thus I can't hardly use it. The reason I accept it is bcoz he said I can try to reinstall a win xp with english version (btw, the OS is win xp pro in japanase version). Thus I bought win xp pro sp2 and try to reinstall it, so I reboot fm cd rom and while the windows setup is starting, the system stopped and the message on my screen read as:A problem has been detected and windows has been shutdown to prevent damage to your computer.If this is the first time you've seen this error screen, restart your computer. If this screen appears again follow these steps:Check for viruses on your computer, resume any newly installed hard drives or hard drive controllers, check your hard drive to make sure it is porperly configured and terminated. Run CHKDSK/F to check hard drive corruption. then restart computer. how in the world I can follow the above steps if everything written on it are in japanase language? I also try to visit the manufacture's website, thinking that perhaps it help solve the problem but....i also need a japanase translator to understand it.
View 14 Replies
View Related
Aug 13, 2005
XPpro with two HDs, CDr/w and DVDr/w.(D AND (E are (were?) a 20G drive which I partitioned over a year ago. This morning I came across a 4G drive in an old box. (really). Being a curious type I pulled the power and ribbon leads from the DVD and plugged them into the 4G HD, after setting the jumper to slave.Then switched on. A dos line appeared saying 'automatically configuring an F: drive' After which Windows appeared to boot up normally. Except that 'My Computer' showed no (D The 4G (F drive showed as not formated. So... I removed the 4G and replaced the leads back to the DVD. My Computer' shows 3.5 floppy Local Disk(C FRSTHAFOLD(D 9G abt Notice NO (E
Not only that but my D drive is missing lots of files and folders wont open. It seems that the partitioning has been forgotten! I have checked what bios settings there are (not many on Compaq 5000) And the bios sees my main Crive and only one 20G disk I have a bad feeling about this Is there any way to get things back to normal?
View 2 Replies
View Related
Jan 12, 2006
This is really a question more than a problem. I'm running a PC with 2 HDs. I am changing the boot drive C: for a larger disk. Now ordinarily I would use a backup program like Ghost or whatever. Now my situation is slightly different in that most of my startup programs are installed on my second HD E:, the C: drive being the boot drive with XP installed.
What my intention is. Is to take out drive E: Then replace that with my new drive. Then I was going to boot in Safe Mode and use the Windows Files & Transfer wizard to copy the C: drive to The new drive. The last thing to do then is swap the C: with the newly installed drive and replace the original E: drive. I hope that all makes sense.
View 6 Replies
View Related
May 25, 2004
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
View 2 Replies
View Related
Jul 31, 2005
I had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
View 2 Replies
View Related
