I'm using a notebook and I just hibernate my computer, so I decided to finally give it a restart. The restart when fine, I saw the boot screen it was booting, I could of aborted the chkdsk but I decided to let it run. After it ran, the computer restarted and the computer hangs after the bios screen. F8 --> Safe Mode, Last known good config and all those nice things didn't work. I even booted into recovery mode, tried chkdsk /p fixboot fixmbr, none of that worked. Anyways, right now I booted into the XP CD clicked enter, clicked REPAIR and it's just reinstalling over I guess? I've never clicked repair before so I don't know how this is going to work
I have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal. It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
I had put my pc off with the on/off button, because I was in a hurry. Later when I tried to open it, it shows the BIOS screen and than nothing happens it just turns black and thats it. And it goes off when I put my finger slowly on the on/off button.
Ive done a fair amount of searching online and tried a number of things myself, needless to say, they didnt work.Ok, so here's the issue; When I go to turn on my computer, I make it to the XP splash screen with the 3 blue bubbles moving left to right... But nothing from there.Additionally, between the BIOS screen and the XP splash screen, theres some weird black screen with what looks like a long barcode-esq bar, where a solid white line fills the gaps moving left to right...
A few weeks ago it started freezing and restarting randomly. Sometimes, on restarting, I would get the "Serious error" pop-up, which I always sent, and always got different results. Sometimes it would say it was an unknown driver error, sometimes an anti-virus error, once a RAM error. I had just upgraded the RAM when this started, so I ran the M$ testing tool several times, no errors. I also removed the new RAM, which didn't solve the problem, and put it back in
I have windows xp professional sp2, I uninstalled Symantec Antivirus then rebooted computer. Went through bios load screen then came a black screen (no hard drive activity or nothing) and stays black with no hard drive activity or anything for about 5 minutes. After the 5 minutes I get the Windows XP loading screen then boots as normal.
Prior to me uninstalling symantec it went straight from bios screens to windows xp loading screen almost immediately. The reason I uninstalled antivirus was I wanted to try a different antivirus
I have had windows XP Pro installed, updated and running fine until about a week ago. I was away from home for about a week and left the machine plugged into the mains but powered down. When I returned home to boot up, it kept doing things like constantly hanging on parts of the bios POST screen, eventually booting up after thirty or so complete restarts. It finally booted into windows but after the last shutting down, it will now not boot up at all. I have replaced the bios battery and reset the bios several times.
When I turn on my computer, it does the bios check, then goes into the bios screen on its own. I have checked all of the bios settings, and see nothing set wrong. The only way I can get itno my xp pro system, is to use "F8" during the bios check, the select my hd from there, then it seems only half of my programs work, and it also seems to be randomly changing the programs that do not work, when I do this.
Alright I've got a horrible problem with a simple anwser. An XP machine I'm working on has a 0x00000024 NTFS_FILE_SYSTEM error. The simple solution to this is to run CHKDSK /F Problem being that I can't get to the point where I even have the option to run this. The machine has no floppy drive and I'm open to all options
When I set CHKDSK to run at next restart, it does NOT display the usual CHKDSK text interface with the runnning progress of the operation. Instead it runs while displaying the Windows Logo screen, not with a running progress bar like ususal though. The logo screen color pallette freezes until CHKDSK is done, then the machine reboots like normal. What happened to my CHKDSK text display? This also happens when I set Diskeeper 7.0 to run at boot time. Instead of the Diskeeper text display, it does the same thing as CHKDSK. Any ideas?
its my previously-formatted HP Pavilion dv5201tx! The problem is as the title above. I can go into safe mode. I've used system restore twice. And in Documents and Settings folder I noticed it has:
Administrator Administrator.computer description name Administrator.computer description name.000 username1 username2
Is it creating more user folders? At some point Administrator.computer description name.000 wasn't there. Corrupted registry hive? I'm not sure! Restarted many times, used Last known good configuration, and it's still black after the boot screen. Please help!
My laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
when I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
i get this error when i tried to open up my computer, first the windows xp loading screen works fine, then after that the screen just goes black and stays like that forever. this happened when i tried to uninstall a USB Bluetooth driver and it was requested to restart my pc so i did, and after that restart i cant get in no more, the screen just goes black after the windows xp load screen. im wondering how can i fix this problem? please help me guys... thank you.. and o yeah one more thing.. when i tried it on safe mode it went to the welcome screen but after that when i try to move my cursor i didnt move at all then i restart my pc again and the whole thing happens once more
friend whose computer has crashed the screen had frozen. He could do nothing except reboot it using the power button but on rebooting, there was a 'no signal' message on a black screen. We have checked the monitor connections (the monitor works when connected to his second computer) and even replaced the video card but of course this made no difference (no signal) We've taken out the HD and installed it on his second system. Does this mean that the most likely cause now is the motherboard/bios or is there something wrong in our approach/deductions
My computer screen freezes up after a while, then turns into a blank light blue screen and then into a black screen. I have used regcure, PCMedkit, and PC Doc Pro I have also tried some of the online help for a fee but nothing seem to work. Lately when trying to reboot I got a blank red screen. I'm using xp pro and a Nvida GeForce 9400GT GRAPHICS CARD.
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
my computer would give me a few problems while booting up. I would start the computer, it would run through BIOS, run through the Windows loading screen, and after that it would run the CHKDSK to make sure my disks are fine. CHKDSK doesn't work, it just freezes right before checking the disks, so I restart and generally it will boot up. Most of the time it would boot up perfectly, but rarely would it go to the xp loading screen and then flicker as if it as going to go to the windows login screen but wouldn't. The screen would just stay black and I'd have to restart.
Next time, generally it would work perfect.So this brings me to the current day. After the windows xp loading screen, it goes black. The computer is on, but I don't see any activity for the HDD via the LED. SO i go into safe mode, i finally get CHKDSK to run, I had to really mess with some stuff to get that working. Windows says the volume is fine, and the only way I can boot my PC is in safe mode, but even that will freeze sometimes while loading some of the files.
it all started when I ran Nod32 antivirus. I ran it because I had some viruses on my computer that I wanted to get rid of. After the scan there were 180 some detected objects that were quarantined or deleted. So then I restart my computer and after the windows xp logo there is just a black screen with no cursor. And after awhile the computer will just restart and try booting up again. I tried going into safe mode and safe mode with command prompt but I still get a black screen with no cursor. The last known good configuration doesn't work either. I'm pretty frustrated because I did nothing wrong. I am also having a feeling that nod32 might have quarantined some infected files that are essential for Windows Xp to boot. I also do not have any windows xp disks with me how to fix this?
whenever i start my dell laptop inspiron 6000 after the dell load a black screen appears with a white loading bar appears which loads for about 10 minutes and then the windows xp proffesional sp2 loads i had recently reinstalled windows from a cd can you please tell me how to get rid of this black loading screen
Was working fine this morning but this afternoon - Upon startup everything runs fine until after the windows splash screen everything goes black and the only thing visable is a cursor, but nothing to click, cannot ctrl=alt=del, cannot right click. Cannot enter safe mode at all, last good configuration doesn't work either. Computer is still running, fan whirring, lights flashing. Fan has been cleaned and power supply checked, no change. Cannot get into anything to run explorer or virus check. She is running Windows XP SP3. I'm unsure of when sp3 was installed. I understand this may be an issue, along with video and graphics drivers, display settings, corrupt registry, flat CMOS battery or loose internal connections.
I start up my laptop with the screen closed. When I open the screen I see the XP login screen for a second and then the computer goes black. I can't do anything else.I have Windows XP Home with the service pack 2 (I regret installing it).I never had any problems before. If you know how to fix this let me know.
when I first start the computer, windows hangs between the black windows logo screen and the first blue screen that says "windows is starting". I have to hit the reset button, it goes to the dos screen with the safe mode, etc. choices. I choose "start using last known good configuration" and I'm good to go. If I turn the computer off during the day and turn it back on, It works fine. It only hangs on the first start of the day.
when i take a screenshot and paste it to a word document, it comes out black. I do not know where the problem is, word or printscrn? how can i avoid that issue?
The machine does the usual, POST etc, does all its checks and then goes to boot from the HDD(HDD is indicated in BIOS etc). At this very stage (just before the WinXP splash Screen) the Screen (LCD) just goes black and does not ever recover. There is no error messages and the HDD LED blinks a couple more times then does nothing. LCD power light stays on green. I have to either turn it off via power button or do a restart with Ctrl,Alt + Del.
I have disconnected all peripherals except Video Card, HDD and still no luck. The only reason why i left the Video Card was that there is no onboard video and i had no other Video cards to replace it. I cant even boot into safe mode.I manage to resolve the problem by doing a WinXP repair over the top but what i really want to know is, was it a corrupt/damaged MBR that was causing this problem or was it a corrupt driver? I have read a few articles about nVidia cards giving black screens but none seem to be similiar to mine.
When ever i start up windows it get threw the Windows boot screen then whens it suppose to come to the logon screen i see only black for no matter how long i leave it on!, i can still move the mouse, and thats all that happens i have a operating system cd, and if i got to repair windows what config do i type?
I changed the screen resolution on my xp machine now all i get after the login screen is a black one.I have tried changing in safe mode but it does not change
I am trying various screencapture programs, but when I try to select an area of the screen to capture, all I get is a black 'box' of the are where I snap'd -
