after messing around with several backup programs, Paragon has proved to be the most practical HOWEVER when I select to backup my C partition it wants to back up over 8 GIGS of data. Converting gig to meg and seeing as CD's can hold only 700mb that's about fifteen CD's that I'm going to have to use! I don't even think that there's a Flash drive large enough to back up what these recovery programs want to back up.I've upgraded and patched .net up to 3.5 (1.1 is broken for some reason). I've upgraded and patched XP Home to service pack 2 and have upgraded and patched IE to release 7.I have various utitlity and virus scanner programs on my system but doing an file observation through Advanced System Care, I have nowhere near 9 gigs of data that I need to back up.So the only thing I can think is that Paragon is trying to back all the formated trash data from the umpteen system formats that I've done.I've used several wipers and asked Paragon to exclude auxilary files but still insists that I have close to 9 gigs of data to back up?
I have read that its best to back-up your file before installing sp3 could anyone tellme how I can do this Safely and Correctly so that I don't lose any of the information I have on my Computers Hard drive.
My OS is Win XP Home. My question is that I noticed on most dvds it will say "data" and aside from pics and videos, can I use a dvd disc to backup my PC? And if so, would +R or -R ake a difference? I'll be using the windows backup wizard that's in my notebook.
I have 2 pc's i is xp home the other xp pro I made a backup of my registry on my xp home pc did it no bother using acronis true image I tried to do the same on my xp pro pc and when I typed regedit in the run box it went straight to a dos box with just rubbish on it I could make no sense of it. The registry editor and the export registry pages never came up.
I bought a full copy of Windows XP with SP2 included to install on my Intel Mac. Since it was a fairly expensive piece of software, I wish to protect this investment by creating a backup copy of the installation CD, in case anything should occur that damages the one that I bought. How can I do this so that the backup CD will install properly? I know very little about images and creating bootable discs, so any guidance would be very much appreciated. One problem that I know I wish to avoid: a fellow that I asked at a computer store said that he had tried but failed, finding that the new copy would not accept the serial number once he had installed it.
I am seriously considering replacing my ME with XP and I was wondering if someone could kind of walk me through the procedure. Do I need to back up everything or just some things. How do you format? Also, if I decide to keep the ME, how do I go about reformatting it?
I need to backup my pre-configured computer (drivers/XP) its a dell laptop, and i got no drivers -CD's- with it. What is the best way to make a duplicate copy of the harddrive (3 gugs)as I'm going to get a nre Hard drive soon?
I really hope someone out there will help me to solve my problem.Im using outlook express to check my mail.now i want to reinstall my xp from scrap.The problem now is I dont want to lose my message.I just want to back up my message only,not the whole hard drive.
1.Could someone give me a suggestion/tips about doing backup? a.The good place for backup? b.How often I should do it? c.The good method for backup? 2.I also have a HD that I made two partition on it, one partition is NTFS and the other is FAT32. How I should backup that HD? 3.What is the filetype system of a CD/DVD?
I want a means of backing up my whole system, applications, data, and everything including the operating system to a separate hard drive. If my hard disk dies I don't want to have to reload the operating system and all its updates, reload all my software and their updates, recreate users This literally takes days.I want to be able to put in a new hard drive and completely recreate my entire system from my backup drive and be back up and running in a couple hours.
I got me a 500 gig external disk, that does not come with much s/w. What are some good s/w out there that allow me to manage my backups. I have XP Home.
I was trying to backup the registry of my Windows XP Home edition desktop, and I was going to use the program ERDNT. Mistakenly, I copied the folder over from my Vista laptop, forgetting that it carried backups of my Vista registry. So I launched the program, and mistakenly, restored my Vista registry backup onto my XP computer. I panicked, and tried doing a system restore right after. Now, everytime the computer starts up I get an error saying that msisadrv.sys is missing or corrupt. What can I do?
I am sole installer and user of my XP Home SP2 machine. I have Administrator rights; (I checked to make sure in Safe Mode as the actual default Admin).In trying to backup my System State, it "fails" 75% into it saying I don't have permission on certain sensitive files and that restore will fail.
Going crazy trying to back up my Quicken 2004 files to CD-RW. The instructions for doing this from Intuit do not work. I have the latest patch which is release3. It claims that the built in CD burner program in XP will open if I click on file then backup. Nothing happens. Where is the built in Cd burner program? Dell was no help as was Quicken.
Well like alot of people I made the mistake of selecting safeboot in the boot.ini file in the msconfig file after my comp got a virus and would not boot into safemode. The hard drive is in two partitions: the C drive used to contain windows, and the D drive which has the data i am trying to save. I don't have a Windows XP disc because it was already on the comp when i bought it. I have attempted to restore the windows files with Bart PE bootup image disc but it wiped out Windows XP completely from the C drive in the process, but the Data drive is still showing up with all its files intact.
How do I make the second partition, which includes all files from another hard drive, pretend that it is the main partition? I want to simulate the second partition being my main one for a while.
I have my Windows format disc and I want to create another partition with it. I tried to create one, but it said something like "You have no more space to create another partition because you used up all your space on your Windows primary partition". See, when I reformatted my computer a while back I just created 1 partition for Windows and applied all the space onto that partition.
If there is a way I could remove some space off of my Windows primary partition and create another partition with the space I removed. I want to do this so I can put general things in my other partition such as documents, music, etc. and just leave the other partition for Windows and programs.
What are the steps needed to access one of my partitions, delete it, then use 1/2 the space and apply to system drive and the other 1/2 to another partition?
I bought a new computer.It appears to have been partitioned into a NTFS format and FAT32 format.The default drive for my documents & my pictures etc is the NTFS which I have been using happily. It is Media Centre Edition so I also have a few large files (>4GB) - though I dont keep them long term.NTFS partition has fulled up - but I cant move my large files to other partition to free up space
I've done a little bit of reading but my question is "Should I reformat the FAT32 to make it more of use to me?".I cant really see the need arising to access older OS files, except .JPG's (photo's I had on my old Windows ME Comp) or "Should I move all my smaller files (documents and photo's) to the FAT32 partition and use the NTFS drive for the bigger files?"
My hard disk arrangement is C(primary partition FAT32)for Windows XP D(extended logical FAT32) for non-os data (movies, pictures etc..) F(primary NTFS) for Vista.. I am formatting F: and then C: through XP installation CD (and C->NTFS from FAT32) is this ok??? will D: be accessible after installing XP on C???
I would like to know if it´s possible to take free space from an extended partition and redistribute it to a primary partition using partition magic 8.0..both partitions are NTFS
Now I am having multiple new problems. I want to completely erase the hard drive and install a new version of XP Home, not Pro. At the beginning of the installation process, it gathers system info. Immediately it responds with "no valid system partition" and the only option is to exit from the process. How can I get past this to complete the installation?
My existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
I had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
i plan to format my computer again and this time i plan to split my primary partition before i format. When i go to format i want to format only the active partition with windows in it.I have two questions. This trick does work right? the partition i created in windows using magic partition 8 won't be formated along with the active partition right? I plan to backup everything on my second partition.When i created the second partition i had two options. to either make it a logical partition or a primary partition. I chose primary partition. would that work?i plan to install windows xp pro sp2.
Over a year ago when I setup my new system and before installing most of my APPS, I backed it up to a small HD. My Win Xp Pro MCE 2004 has become a little buggy (MY FAULT).How would I copy or clone the smaller HD over to my 80GB drive AND maintain the larger partitions? I have Ghost 2003 but I'm not sure if it permits me to set the partition size when copying HD's.
I reinstalled my OS several months ago, and decided that I might want a dual boot in the future. I already had an old, smaller drive in the machine that's labeled the c: drive. Reading one time that for security purposes it's good to have your OS on a drive other than C:, I decided to not alter the drive lettering.
I then partitioned a new internal hard drive into several logical drives. I formatted the D: partition as a Dos fat32 partition and the rest as NFTS partitions. Somehow, I allowed the D: partition to be the primary partition, while the E: partition which contains the Win 2000 Pro OS Winnt directory is a logical drive.
When I just checked disk management, I noticed that not only is boot.ini on the D: Dos partition, but so is ntldr along with the following Dos setup files:
To reformat my computer now and i downloaded all the files i'd need to reformat and compressed them into a single rar file to put onto my d drive.
Although when i go to move theses filesonto my d drive i get a message saying: cannot copy "reformatfiles": There is not enough free disk space Delete one or more files to free disk space, and then try again Free space on this drive by deleteting old or unnecessary diles click disk cleanup.
