My OS is Win XP Home. My question is that I noticed on most dvds it will say "data" and aside from pics and videos, can I use a dvd disc to backup my PC? And if so, would +R or -R ake a difference? I'll be using the windows backup wizard that's in my notebook.
View 3 RepliesI have read that its best to back-up your file before installing sp3 could anyone tellme how I can do this Safely and Correctly so that I don't lose any of the information I have on my Computers Hard drive.
View 6 Replies View Relatedafter messing around with several backup programs, Paragon has proved to be the most practical HOWEVER when I select to backup my C partition it wants to back up over 8 GIGS of data. Converting gig to meg and seeing as CD's can hold only 700mb that's about fifteen CD's that I'm going to have to use! I don't even think that there's a Flash drive large enough to back up what these recovery programs want to back up.I've upgraded and patched .net up to 3.5 (1.1 is broken for some reason). I've upgraded and patched XP Home to service pack 2 and have upgraded and patched IE to release 7.I have various utitlity and virus scanner programs on my system but doing an file observation through Advanced System Care, I have nowhere near 9 gigs of data that I need to back up.So the only thing I can think is that Paragon is trying to back all the formated trash data from the umpteen system formats that I've done.I've used several wipers and asked Paragon to exclude auxilary files but still insists that I have close to 9 gigs of data to back up?
View 14 Replies View RelatedI have 2 pc's i is xp home the other xp pro I made a backup of my registry on my xp home pc did it no bother using acronis true image I tried to do the same on my xp pro pc and when I typed regedit in the run box it went straight to a dos box with just rubbish on it I could make no sense of it. The registry editor and the export registry pages never came up.
View 14 Replies View RelatedI bought a full copy of Windows XP with SP2 included to install on my Intel Mac. Since it was a fairly expensive piece of software, I wish to protect this investment by creating a backup copy of the installation CD, in case anything should occur that damages the one that I bought. How can I do this so that the backup CD will install properly? I know very little about images and creating bootable discs, so any guidance would be very much appreciated. One problem that I know I wish to avoid: a fellow that I asked at a computer store said that he had tried but failed, finding that the new copy would not accept the serial number once he had installed it.
View 6 Replies View Relatedi have a labtec web cam with software but i have a dell mini and have no where to insert the disc, please help
View 1 Replies View RelatedI'm running XP Home on a Sony VAIO. The PC has a partitioned HD: C (main), & D (storage). I defrag every night.
This evening, I got the dreaded "not enough disc space to complete disc defragmenter" message. Suddenly tonight I'm showing only 2% free space on drive C. I went in and changed my System Restore percentage from 12% to 6%. Now I'm showing 6% free space (but still can't defrag).
I shouldn't have had to change my System Restore percentage tho. I'm sure that's not the culprit. Up until last night the C drive was nowhere near this full. Something's there tonight that wasn't yesterday. ...A whole LOT of something. The Defrag graph is showing a nearly FULL C drive with a LOT of red "fragmented" files"
I've been doing a bit of downloading, but after it's on the desktop (part of C), I move it to the D storage drive (which has a LOT of free space remaining).
Something's fishy. I'm no expert, but I'm thinking I need to find some type of application to tell me what's suddenly on that drive taking up all this space. Anyone have any helpful suggestions?
neither wmp 11 or roxio recognizes a blank disc. when i try to burn a disc (dvd or cd) both wmp 11 and roxio tells me to insert a blank disc. i have tried putting a disc in first, or wait for the program to tell me to insert disc but neither way works!:
View 9 Replies View RelatedI am seriously considering replacing my ME with XP and I was wondering if someone could kind of walk me through the procedure. Do I need to back up everything or just some things. How do you format? Also, if I decide to keep the ME, how do I go about reformatting it?
View 2 Replies View RelatedI need to backup my pre-configured computer (drivers/XP) its a dell laptop, and i got no drivers -CD's- with it. What is the best way to make a duplicate copy of the harddrive (3 gugs)as I'm going to get a nre Hard drive soon?
View 10 Replies View RelatedI really hope someone out there will help me to solve my problem.Im using outlook express to check my mail.now i want to reinstall my xp from scrap.The problem now is I dont want to lose my message.I just want to back up my message only,not the whole hard drive.
View 13 Replies View Related1.Could someone give me a suggestion/tips about doing backup?
a.The good place for backup?
b.How often I should do it?
c.The good method for backup?
2.I also have a HD that I made two partition on it, one partition is NTFS and the other is FAT32. How I should backup that HD?
3.What is the filetype system of a CD/DVD?
I want a means of backing up my whole system, applications, data, and everything including the operating system to a separate hard drive. If my hard disk dies I don't want to have to reload the operating system and all its updates, reload all my software and their updates, recreate users This literally takes days.I want to be able to put in a new hard drive and completely recreate my entire system from my backup drive and be back up and running in a couple hours.
View 35 Replies View RelatedI got me a 500 gig external disk, that does not come with much s/w. What are some good s/w out there that allow me to manage my backups. I have XP Home.
View 8 Replies View RelatedMy packard bell notebook model (easynote) E-3242 running windows XP. After installing SP2, XP wont load, even in safe mode. I already used cd-bootable Knoppix to copy all documents i needed to rescue. At this point a complete Re-install would be great, but alas, no install disk came with this notebook, And i lost the recovery discs i made. I do NOT have any XP disc available.How can I begin a re-install or similiar from the Hardisk with no Discs?
View 5 Replies View RelatedI get a little confused by terms like restore vs recovery, which are often interchanged incorrectly IMO -and then there are the terms bootable disc and startup disc, which can also get confusing - and I have seen other terms used also.
please explain exactly what you mean by the "bootable XP CD". I have a new XPsp2 home edition pc, and I had a millennium before that (which I made a "startup disc" for in add/remove programs - so I guess a startup disc is yet another term for boot disc - it was only a 3-1/2" diskette (less than a meg), and it would get my millennium to boot by typing "scanreg /restore" at a prompt that you eventually came to.
For my XP, I immediately made a Compaq "recovery dvd" (it took 2-dvd's) utilizing the "Compaq recovery cd-dvd creator" in start/programs/pc tools. This dvd (can also use cd's but it takes 8 or 9 cd's I believe) contains everything that is on the pc (from the factory), and which is also in the system recovery partition D:. There is also something called a "Recovery Tools CD", which I did not burn, since it did not seem necessary, after
reading about it in the "troubleshooting and system recovery guide" that came with my Compaq. I will burn that one to, if you can explain what it will do, that I can't ultimately achieve by using the "recovery dvd". The manual said that one of the things the "recovery tools cd" did was to remove the system recovery partition (drive D), so you could use it - but I'm sure there is another way of doing that from within the pc once you got it running using the recovery dvd - am I right - I've never messed around with partitioning, since I have no need to.
My new XP did not come with any "bootable CD" per se, and I made the "recovery dvd", as stated above. So please shed some light on what the "bootable XP CD" is that you refer to (because you said that a "restore Cd is really overkill" - I assume you mean the "recovery CD" that I mentioned). Also please provide your comments on the "recovery tools CD", and any other comments you have on the various terminologies I have mentioned above.
Microsoft Guided Help works well for backing up my registry and it is certainly interesting to watch it run.
What type of program is it that runs on-line?
I was trying to backup the registry of my Windows XP Home edition desktop, and I was going to use the program ERDNT. Mistakenly, I copied the folder over from my Vista laptop, forgetting that it carried backups of my Vista registry. So I launched the program, and mistakenly, restored my Vista registry backup onto my XP computer. I panicked, and tried doing a system restore right after. Now, everytime the computer starts up I get an error saying that msisadrv.sys is missing or corrupt. What can I do?
View 1 Replies View RelatedI am sole installer and user of my XP Home SP2 machine. I have Administrator rights; (I checked to make sure in Safe Mode as the actual default Admin).In trying to backup my System State, it "fails" 75% into it saying I don't have permission on certain sensitive files and that restore will fail.
View 4 Replies View RelatedGoing crazy trying to back up my Quicken 2004 files to CD-RW. The instructions for doing this from Intuit do not work. I have the latest patch which is release3. It claims that the built in CD burner program in XP will open if I click on file then backup. Nothing happens. Where is the built in Cd burner program? Dell was no help as was Quicken.
View 8 Replies View RelatedWell like alot of people I made the mistake of selecting safeboot in the boot.ini file in the msconfig file after my comp got a virus and would not boot into safemode. The hard drive is in two partitions: the C drive used to contain windows, and the D drive which has the data i am trying to save. I don't have a Windows XP disc because it was already on the comp when i bought it. I have attempted to restore the windows files with Bart PE bootup image disc but it wiped out Windows XP completely from the C drive in the process, but the Data drive is still showing up with all its files intact.
View 6 Replies View RelatedAfter putting the windows XP CD in and rebooting, now whenever the computer is restarted I get the blue screen that says unable to find disc press F3 to exit setup. How do I stop this so computer will reboot normally?
View 6 Replies View RelatedWindows XP Home Edition (sp 2) HP Pavillion After I start the computer, I get this message---Red circle with a white x message states There is no disc in the drive. Please insert a disc into drive. This started this morning. Didn't have it last night when I shut it down. Have no idea why this all of a sudden started. Any help would be appreciated. I have tried clicking on cancel
comes right back. Went into Task Manager and clicked End Task.
I looking for a way to make sure my Operation System is working correctly? I have a recovery disc for Windows XP PRO, but it says that it will wipe out all of my upgrades if I use it?Is there a Service Pack 2 Recovery File that I can download to a My desktop, and then burn to a CD?
View 1 Replies View RelatedI have tried to install a new xp pro sp3 disc on a new computer but have been getting errors in the installation. I have tried 3 different times but it says that the disc is missing some components and when it is final it does not work properly.
I finally talked to a tech person that asked me if I had another disc and I have an older sp2 disc. He said to install that but when I put in the key for my new disc it does not work with my older disc. I finally put in my old key and it worked fine. THe installation went off without a hitch but I won't be able to use my old key when I activate it. When I install the sp3 download will I be able to change my key to the new disc key?
I have tried installing the service pack 2 for windows XP from both the internet and from a CD that Microsoft sent me. My problem is when it gets to the point where it says "backing up registry" it acts like it timed out. It won't do anything more and I have to do an alt+ct+del to turn it off.
View 2 Replies View RelatedI have DVD-RAM drive in my hp laptop and i used to write DVD-R disc usually.
In the recent time i get an message when insert a dvd-r disc. The error message is
The disc is not writable
Please insert a writable disc
Disc required for compliation : DVD R/RW, DVD R DL, DVD-RAM
Disc type in the recorder VD-R
But i used the same disc before and it was half writtened already.
help me to resolve.
Note: burning software nero 7 essentils(nero smartstart)
I have been trying to install my scanner and everytime I put the CD for the scanner, and hit run to load it up, nothing happens, I tried both the cd and cd/rw drive and nothing.I also checked the device manager to see if everything was there and it was.
View 9 Replies View Relatedi was told that one could create a 'slipstream' disc on which xp pro, sp2, and updates after are installed during installation. True? If so how? I reinstall my OS each year and it would be a blessing to install all at one time.
View 7 Replies View RelatedI was trying to run a computer game off a CD and I got the error "There is no disk in the drive. Please insert a disk into drive E:." The E drive is my CD RW. I had run this program before without a problem. I took the disk out and put it back in- no luck. I gave up.Now I try to run a program that has been installed on my harddrive (Powerpoint), and I get the same error. I never needed to have a disk in the E drive to use that program before. I use Windows XP. Not sure where to look to troubleshoot this one.
View 5 Replies View RelatedI have Windows XP Home installed and my dvd/cd burner is a Device Description SONY DVD RW DRU-530A. I have burned many files,photos,and music on this unit using cd-r discs. I am now using DVD-r discs and the burner will not recognize the disc. I tried DVD+r discs and have the same problem. Attached is the statement I get when I try to burn a disc. Should I go back to a CD-R disc or what could the problem be? I have tried to burn using Windows and using Nero with the same result.
View 4 Replies View Related