I'm building a new computer here, and i'm using a previously owned mobo. I'm having an issue getting pass the BIOS spalsh screen and into the boot menu so i could bootup and install windows. I have no beeps at all. every component of this computer is brand new except for the motherboard. I try to go into the setup and i get the dialogue, "Entering Setup..." but it just stays frozen like that.
I know i have to Clear CMOS and i removed the CMOS battery for almost 3 days and nothing at all. i cannot find the CMOS jumper. i see a jumper near the CMOS battery but it isnt labeled clr cmos. i removed it and put it on the 2nd and 3rd pin and the machine doesnt even turn on, but when i locate it back to the 1st and 2nd pin, it turns on perfectly fine, but i still cannot get past the startup screen
the screen i cannot get past looks similar to the image below.
Turn the computer on, it starts to boot, I see the compaq splash screen then the blue windows is starting. Then it just restarts the process over. I have tried to repair windows: The F8 to last known good config & F8 safe and it just restarts from both of those as well. Win XP SP3 Currently doing this: You can boot from the cd and press R to go to the recovery console. Your best bet is to try running Checkdisk. So once in the recovery console, type chkdsk /r and press enter. It could take from 20 minutes to a couple of hours, depending on the repairs it needs to make
Ive done a fair amount of searching online and tried a number of things myself, needless to say, they didnt work.Ok, so here's the issue; When I go to turn on my computer, I make it to the XP splash screen with the 3 blue bubbles moving left to right... But nothing from there.Additionally, between the BIOS screen and the XP splash screen, theres some weird black screen with what looks like a long barcode-esq bar, where a solid white line fills the gaps moving left to right...
I'm Currently Dual-booting between Windows XP and Fedora Core 5 on my laptop. I no longer want FC5 so I thought I would format that partition to regain my hard drive space. I thought the easiest way to do that would be to boot from my windows CD, but discovered that my System won't do that anymore (I know it used to, because thats how I installed FC5 in the first place). It won't boot from my FC5 cd's either.So I tried to access the BIOS to see what's going on, but for some reason I can't. The startup screen tells me to push F2 but that doesn't work.
when I am using my computer, some of the buttons don't appear. The names of icons aren't there. One day my wife was working on a word document, and some of the text disappeared. When she scrolled down, then back up, some of it was back. The text was there, we just couldn't see it because of the display being weird. Dual core 3.4ghz Dell, 2gb RAM. Fairly new machine, XP pro.
I have had windows XP Pro installed, updated and running fine until about a week ago. I was away from home for about a week and left the machine plugged into the mains but powered down. When I returned home to boot up, it kept doing things like constantly hanging on parts of the bios POST screen, eventually booting up after thirty or so complete restarts. It finally booted into windows but after the last shutting down, it will now not boot up at all. I have replaced the bios battery and reset the bios several times.
a virus on their machine ,I don't know which or what, then tried to get rid of it by reloading windows. Because I teach office applications such as word, excel etc, they think I can fix it for them straight away. I have a little knowledge, they have none so to speak. Someone has pointed me to your site and so I thought I would give you guys a shot. What is happening. - The computer hard drive has got very little on it - but it is running very very slow. I know this is processor memory not storage memory that governs the speed, but I thought you needed to know that bit of info. The email doesn't appear to be working - it says the IMAP setting is wrong but I have checked the email account properties and they all look ok to me. It will log onto the internet - eventually - but is exceptionally slow and will not open any pages - although the browser window opens it keeps saying 'page cannot be displayed'. I have run adaware - but there wasn't much on it - although it did say that it could not delete 'deskadserve'.....
When I turn on my computer, it does the bios check, then goes into the bios screen on its own. I have checked all of the bios settings, and see nothing set wrong. The only way I can get itno my xp pro system, is to use "F8" during the bios check, the select my hd from there, then it seems only half of my programs work, and it also seems to be randomly changing the programs that do not work, when I do this.
I just replaced my old DVD ROM with a new DVD-RW drive. The system writes to the new drive fine (I have burned a couple of Video DVDs) but when I boot the system the Bios says it doesn't see the D: (CD) or E: (DVD) drive. Once I am into Windows XP I can also play CDs from the CR-RW drive but I can't use it to copy new software onto the system.
Very similar to the following problem but i do not have a raid, and it seems that this PC has a raid and i don't, plus it was never really determined what the actual solution was.
The basics: XP Professional Boot up screen, right before the windows loading screen, or direct after the F8 Menu if you hit "Start Windows Normally..." it will just lock up, no HDD activity, blank screen. now BSOD, nothing.
All 3 safe mods work fine.
Ran chkdsk /r in recovery. Ran proper fixboot procedure.
Went into safe mode and checked the event viewer.
The only concerning message i got was: The following boot-start or system-start driver(s) failed to load: AmdK8 Fips nod32drv
Formatting really isnt an issue since i can back up anything i need through safe mode. However its just the fact that the Windows gremlin has struck me again and i must defeat it once more.
I highly doubt this is a hardware issue as it is more of a driver/software issue.any help?
I have an old T1090 eMachine that doesn't recognize the new larger hard drives. I purchased a 200 GB PATA (IDE) drive and it shows up as a 75 GB drive using GParted and under Windows Disk Management. I expected that it would only be recognized as 137 GB, but I can't explain why it only sees 75 GB. I suspect that the BIOS needs to be updated, but I've never done this before so I was looking for a procedure and ideas for trying to find the latest BIOS online.
i'm having to boot into windows xp. on power up sytem goes through the windows xp splash screen (with progress bar) and then instead of login prompt it goes just into the blue screen with moveable mouse pointer arrow.
issue seems to be similar to: http://forums.techguy.org/windows-nt...o-startup.html http://forums.techguy.org/windows-nt...p-problem.html but recommended solutions didn't help so far.
symptoms just before issue - was not able to run use some system features - utility to turn off the display, utility to bring up battery info - everything was working fine before this
what i've tried: boot to Last Known Good Configuration - resulting in the same blue screen
boot to Safe Mode / Safe Mode with networking / Safe Mode with comman prompt - resulting in blank (black) screen with "Safe Mode" in the corners and moveable mouse test the hardware (hard drive / memory etc.) via build in PC Doctor - all seems to be working i am able to use bootable XP CD from other machine to get into Recovery Console i am able to boot to simple live XP using BartPE-XPE usb key and access the hard drive
Was working fine this morning but this afternoon - Upon startup everything runs fine until after the windows splash screen everything goes black and the only thing visable is a cursor, but nothing to click, cannot ctrl=alt=del, cannot right click. Cannot enter safe mode at all, last good configuration doesn't work either. Computer is still running, fan whirring, lights flashing. Fan has been cleaned and power supply checked, no change. Cannot get into anything to run explorer or virus check. She is running Windows XP SP3. I'm unsure of when sp3 was installed. I understand this may be an issue, along with video and graphics drivers, display settings, corrupt registry, flat CMOS battery or loose internal connections.
How can i change or remove it?? can i do the same with the shutdown screen?? also does anybody know how to get rid of i.e.s icon?? i use avant browser.
I boot my xp machine but it hangs at the xp splash screen.It's not like it's frozen, the blue bar under the "windows" just scrolls and scrolls and scrolls, etc. The same happens when I try booting to VGA mode.I am able to boot to safe mode, just not completely. I get to a screen that says " Safe mode Microsoft (R) Windows XP (R) (Build 2600.xpsp_sp2_gdr.05001-119: Service Pack 2) Safe Mode.I can also see the mouse moving around, just nothing else. Nothing was added, removed or installed.
This problem started several days ago. On restart the XP splash screen loads but freezes as the progress bar is in motion. After rebooting several times it does load to the desktop, but on restarting again it hangs. I have searched reference articles, forums, etc and have found others have the same problem and have narrowed it down to nvidia drivers and hardware conflicts that load after 'mup.sys' in the boot up process.I had installed a nvidia graphics card and driver before this problem began but then uninstalled, deciding to keep the on board sis igp. I have downloaded driver cleaner and removed all traces of the nvidia driver but the problem persists..I am running XP sp2, p4 3ghz, foxconn motherboard, sis 661fx graphics.
My PC has developed a problem and I'm looking a solution. What I'm seeing is that when I boot my PC, it gets to the splash screen and I see the scroller moving but that's it. No color changes no BSOD, etc. At this point, I've been able to restore my system using an Acronis full system recovery but I would like to know what's going on behind the scenes when the progress bar moves but nothing.
I'm getting a BSOD. Everything seems fine--it is at least getting to the boot.ini since I get an OS selection--W2K or the Recovery Console. The W2K splash screen comes up, the blue hash marks scroll about half way across the bottom, halt, then BSOD "INACCESSIBLE_BOOT_DEVICE". I tried the Recovery console, but that BSODs as well. I used ERD to run CHKDSK --- no errors. Possibly the hdd? ERD took a loooong time to read what OSs were on the hdd--five minutes.
i used it all fine about 2 hrs ago and shutted down fine. i just now go 2 boot up and after i get the BEEp, bios screen, it says vereifying dmi pool data for a split ssecond and gives a blak screen for a split and does the Splash. but my issue is, it doesnt give me a splash...it just sits at that blak screen.
When im tryin 2 start her up, after the splash scr een l oads, just as it enters the next stage of boot up it flashes a blu screen and reboots. i cant boot under ANY start up options.
I am new here and I consider myself very knowledgeable on a computer but this one has me pulling my hair out. I have seen posts for similar situations but nothing identical to mine. What I have is a Dell E520 and we had a power serge and the computer shutoff. When the computer was turned back on it P.O.S.T. fine, loaded to splash screen and then once that is done loading I get a blank screen. Nothing. I reset go to safe mode, works fine, loads into safe mode. I try to load safe mode with networking, will not work. So I went back to safe mode and tried to do a system restore, told me it was disables and I would have to go back and enable it in regular mode.
I am running windows XP Home edition with SP2. When starting up it stalls at the XP splash screen with the flashing bar below it. I can start in safe mode but haven't had any luck with the system restore.
I have a Dell Dimension 4600. I got a new 80gb hard drive and wanted to clone it with the current 20gb drive. I took both drives and connected them to a different pc that had norton ghost on it. After cloning, which went fine, I placed them back into the Dell with the 80 gig set as master, and the 20gb set as slave. The computer would post normally and boot to a black screen with a blinking cursor, this happned right after verifying dmi data pool. It would hang at this screen never getting to the windows loading screen.
I returned the 20gb to the master drive and set the 80gb as the slave. It booted fine. After getting into windows I saw it was reporting the 80gb as C: and the 20gb as D:. I changed the drive letter of the 80gb (in safe mode) to G:. After changing it the computer would freeze at the XP splash screen, however I still had control of the mouse. I believe this was caused from windows search for the page file on C: which no longer existed............
Today, I tried to start up my XP computer; it gets to a splash screen saying that the motherboard is optimised for the Intel-P4 combination (which always pops up after POST and before the system boots up) and it just stopped. Rebooting encounters the same problem.I can't boot from floppy, CD, or DVD drives, and cannot get to the BIOS setup (hitting the appropriate key just gives me a blinking cursor on a black screen with which I can't type).There is obviously something seriously wrong, but it's beyond my very limited skills.
I copied my laptop hard drive with Norton Ghost 14 to a larger HD and installed it onto my Dell Inspiron 9300. It starts with the Windows XP screen with the loading progress bar and gets to the blue screen with Windows XP and just stalls, won't load. I can get it into safe mode but it gets to the same splash screen and stalls again.
I had to switch my pc off before shutting down properly earlier today. Each time I attempt to boot, I get the message windows did not start properly etc. and I am given a choice of whether to start in safe mode, last known setting that worked, or normally, etc. When attempting to start normally, I get the windows xp splash screen whith the progress bar for a few seconds, then at the point it would normally switch to the blue password prompt, the screen goes black. No error message, no cursor, no nothing. The system just hangs. It does exactly the same when I try 'last known settings that worked'. On trying in safe mode, the list of drivers it is attempting to load comes up, fills the screen, and then just stays like that.
I recently had my motherboard changed on my Intel Pentium IV 1.6 GHz PC due to some serious problems.Now, I'm again suffering from problems. Once I boot it, POST is displayed, and the Windows splash screen appears. Very often, the screen goes blank. It seems that everything else is working. If I press Alt+F4 followed by a 'u' (To select the 'turn off' button), I hear the Windoze shut-down sound and the computer shuts down.
I downloaded and registered VMware Server so I could make my own virtual machines. I was planning to try Ubuntu and Solaris. VMware made my Ubuntu virtual machine so then I tried to install Ubuntu on it using the alternate CD (I didn't have the live disk on hand). The install went fine for a while, but eventually the screen started to blank, return, and blank again. Finally it blanked and wouldn't return. I saw the Ubuntu workspace switcher in the lower right-hand corner and the Ubuntu logo in the upper left-hand corner, but everything else was black. I tried to do a ctrl+alt to jump back to Windows, but the VM screen shrank and parts of the windows I had open in Windows showed up, but the screen was mostly white.
I switch on my PC, it starts ok till the Windows Welcome screen. I hear the XP intro music then there's a 3 second pause, then a short beep, another 3 second pause, then another short beep, and then another 3 second pause followed by another short beep. Then the PC continues on to the desktop, and it seemingly runs ok. I regularly run Adaware, Spybot, Spyware blaster, CWShredder, and Microsoft Antispyware. everything comes up fine. I have PC-cillin 2005 on my system and that is checked regularly. Now I don't know if this is a coincidence or just what, but when I first heard the beeps, I thought to do a system restore back a month or so, but the system restore had been turned off. Now I know that I didn't do it, and no one else uses my system, so I don't know if that has anything to do with the beep problem.
