I recently download Windows 8 ISO image. and i have extracted it with win rar. i have lost ISO image. and i want to make ISO bootalbe image. but whenever i add this folder to power ISO, it says none_ bootable image. how can i add boot information even i don't have boot information for windows 8.
View 2 RepliesI've got a windows 8 laptop which gives me this error message when i try to switch it on:
"Your PC needs to be repaired The boot configuration data file is missing some required information.
File:BCD Error Code : 0xc000000d ............................" I'm sure you are all familiar with the rest of this dreaded error code.
I've tried all the repair options, recovery disks to a windows 8 bootable flash disk, the command prompt fix boot commands as well but still I get the same error message whenever i try to boot windows.
Now I'd like to know, can't i just copy the boot folders from another similar windows 8 pc and paste them into my harddrive to fix this?
I got this msg tryng to refresh my pc . because my vaio gate app wasnt working right . so after the restar i just got the blue screen with this error the boot configutating data file dosent have valid infomation of an operating system.
Error code 0xc000098 /BCD
Installed 8.1 about a week ago and I'm fairly happy with it so far (after removing charms, going straight to desktop etc) however I have a few minor problems.
Firstly my windows keyboard shortcut key is not working (Logitech G15)
Secondly in power options there are no plans that I can change, if for example I try to create a power plan I get the message "Your power plan information is not available". Tried sfc etc but no problems are detected.
Finally it just seems slower in some respects vs win 7 x64 ultimate, especially booting up. SSDs are all trimmed and aligned and all drivers are installed.
I would like to change the windows edition in the system information of windows 8.1 Pro
I have attached the image that I would like to change is there any way that this can be done
I would like it to read something custom of my choosing., I hear there is also another place that this is displayed
My computer had 4GB of RAM and an Intel G2030 processor. It worked fine for my needs, but I'm a compulsive tinkerer. I have upgraded to 12GB of RAM (supposed to be 16, but one module of the 16GB kit I purchased was DOA) and to an Intel i5-3550S processor. These were done in two separate installs, and the computer seems to be running fine, as far as I can tell.
My problem is that the System Information screen doesn't seem to be updated with the new processor. It shows the RAM (11.9GB), but still shows the 2-core G2030 processor. When I go to the BIOS, however, it shows the i5-3550S. Is there something I need to do to get this to update? I'd like to be sure that the computer recognizes the new processor...
I had a virus and needed to contact HP helpdesk but on start-up all my files now look like this "filename (2013_07_30 16_31_09 UTC)" HP said do this manually but not an option. how to remove the bracketed information?
View 1 Replies View RelatedI have a problem with System Volume Information in my Drive D: (239GB), enlarged from 5GB to 60GB (Check from My Defrag). and the free space down from 113 GB to 51 GB. I don't know how it works, it happen when my System is under Automatic Maintenance (in Windows 8). I want to save my disk space. I have check my disk using CHKDSK. i found error, and fix that. I check again, and found no Problems.
View 6 Replies View RelatedI'm having problems with this computer and I think some bad software may have gotten into my computer. Which of the following does not belong so I can delete it?
price meter
my search dial
movies toolbar for internet explorer
convert file for free
begin converter
I have been noticing recently, my C drive gets occupied fully even if there are no bigger programs installed.
Out of 150gb, after uninstalling few programs, the space left was 30gb. Day by day it started decreasing and i saw 20gb today.
I used the disk cleanup tool and it shows only 100mb after selecting all fields.
I was worried still that space was not freeing and ran this program WinDirStat. Here are the screenshots.
System Volume information folder occupies 75% of space - meaning 100gb.
There are lot of files which were around 1gb - 2gb and they are created from 2013.
why 100 gb? I read that this service is important but why is it taking this much of space.. remove these unwanted older files if any.
I tried below options after googling and also searching in this forum:
Used disk clean up tool and selected more options > system restore and shadow copies > deleteDisabling and Enabling System restoreDeleting shadow copies through VSSAdmin Delete Shadows commandVirus scan in System Volume Information folder (after taking ownership of that folder) through Kaspersky and ESET SSManual delete of the files.Selecting delete option in System Protection > ConfigureChanging maximum usage to some x%
I have tried all these methods but still those files are existing.
How to clear facebook signin information from a Sanyo Smart TV? this user is already in use on another account ...
View 3 Replies View RelatedI recently used IOBit uninstaller to remove all traces of a program from the registry. I'm assuming it removed something that caused this issue, because after I used it all my program information in Add/Remove programs was missing. However, other users on my PC show all information in Add/Remove programs. Is there a way to repopulate this or would I have to create a new user?
View 5 Replies View RelatedI am extremely new to Windows 8. I was handed over a work computer today that runs Windows 8, the previous employee set everything up using her personal email information (IE: the email from the main email envelope is her email, and the calendar feature would add details to her personal calendar not the one for work). She is not set up as a user on the computer at all, but her personal details are linked into the system.
I have searched the documents everywhere and have gone through settings for the two applications trying to work out how to remove her personal information from the system and replace it with the work information. She doesn't need to see the new schedules or the times that our employees will be out on different jobs.
Is there a way for me to go in and remove her personal information and replace it with the information for the company? I could sit and question her ethic as an employee for hours as to why she would do it this way, but honestly if her ethic was great, I wouldn't be taking this over at this point. I just need to ensure that the computer is set up for the business not for someone's personal email and calendar and ensure she isn't getting notifications of our future work schedules.
I just got a refurbished ASUS K75DE laptop, and it came with Windows 8 on it. I am wanting to run a dual boot with Win7, so I disabled fast-boot just fine, and went into the UEFI BIOS and disabled the secure boot.
While I was there, I did like I have always done and set a BIOS boot-up password. I then proceed to boot to my Win7 installer USB Flash drive, but I was running low on battery power so I aborted the install and shut the computer down to try again later.
Now however when I get into BIOS to select boot priority, all options are grayed out except for system time and a few other non-essentials. At the bottom of the first BIOS screen it says "User Level : User" and I can't seem to find a way to reverse this issue. So now I'm stuck, can't boot to anything but the HDD because it is first by default.
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
Client computer that shows black screen with text at boot up. Cannot boot into Windows 8 (8.1?)
This is what is on the black screen;
Your PC needs to restat.
Please hold down your power button.
Error Code 0x0000012a
Parameters:
0x0000000000000001
0x0000000000000046
0x0000000000000000
0x0000000000000000
After re-boot a message shows
Prepairing Auto Repair
Diagnosing PC
PC Did Not Start correctly either with 2 options - Restart and trying any of the Advanced Options
Restart option did nothing but restart this cycle of BSOD, etc. Advanced options to troubleshoot (Refresh, Reset, System Repair, Command Prompt are not available due to the following message:" You need to sign in as an administrator to continue, but there aren't any administrator accounts on this PC"
No system recovery disks or Windows 8 Installation media available.
PS :Cannot boot into Windows 8
Windows 8.1 failing to boot when any usb storage drive is plugged in during boot. My only solution is to unplug everything each boot unless I use my KVM switch which does not support usb 3.0.
View 2 Replies View RelatedMy Dell Inspiron 660 is 2 months old. It came with Windows 8 preinstalled. My problem: I am trying to change the boot order so I can boot from CD ROM as a first option. I have tried using the "F" keys on boot, but it just ignores me and goes on to boot up. I have also tried the "Advanced Options > UEFI Firmware Settings" in "Change PC Settings" and got the same results. I spent some time on the phone with a Dell tech. After trying all the things I had already tried, he and his supervisor decided I must have a bad Motherboard. Does this sound right? Is there any way to repair this problem?
View 9 Replies View RelatedI recently felt the urge to experiment with Linux and installed Ubuntu Mint and tried to set up dual booting.
However I seem to have only suceeded in preventing Windows booting at all. I cannot get into the recovery drive to undo my wrong doing.
How can I reset the windows boot manager without access to windows or recovery partitions?
.I have an HP Pavilion Slimline PC desktop. It does not allow me to boot from CD/DVD drive or USB connection. Windows 8.1. I wish to be able to use the boot options cd/dvd and all the USB options. I can't use any of the options. I list bios setup options and suggestions given to me from articles but I'm not sure I'm afraid of error. I don't have that much experience in bios setup.
Articles have said in BIOS setup Security is to be disabled. I suppose Legacy remains disabled(?). It is suggested that I shutdown and reboot.
BIOS Setup > Storage > Boot Order has this list:
UEFI Boot Sources
Windows Boot Manager
USB Floppy/CD[code]....
At bottom of this Boot Order Window are the options: F5=disable Enter=drag F10=accept ESC=cancel
Windows Boot Manager at the the top stops all other options.beneath it. How does that 'drag' work. Don'tr I have to move 'Windows Boot Manager' to the bottom?
And move ATAPI CD/DVD drive to the top? of this UEFI boot sources list?
Is it true that if there is an error in the BIOS Boot Setup and Windows 8.1 does not boot, the BIOS Setup will come up instead so one can do a fix?
I had an issue with my Windows 8 where I was forced to reinstall it. I have completely wiped my SSD and reinstalled Windows 8 on it. However, now it will not let me pick my boot order. It is forcing me to use Windows Boot Manager as my Boot Option 1. If I use anything else, I just get a black screen with a blinking line cursor.
It didn't use to do this before I had to reinstall. I'm not sure how to fix this. It also will not let me choose F11 boot options, it always is forcing me to use Windows Boot Manager.
How do I make it so I can boot from whichever boot order I want, instead of using Boot Manager?
I have Kubuntu 13.10 and Windows 8.1 installed on separate drives on my computer. Dual-booting through the Linux bootloader works fine, as in I can boot either Windows 8.1 or Linux without incident. However, whenever I boot Windows, it resets itself to the highest boot priority, and always re-adds a boot entry if I remove it. My question is, how can I get it to stop doing this? I can temporarily fix it through Linux, but I'd really like to stop it permanently, as it's starting to become a pain.
EDIT: It turns out my problem was related to a duplicate entry for Ubuntu. If you're having this problem and have tried to install Linux a couple of times, check to make sure that you only have one entry for it.
I have a Dell Inspiron 17, 5000 Series (1.7 GHz Intel Pentium 3558U, 4 GB Ram, 500 GB HDD). It came preloaded with Windows 8.1. I needed Windows 7 so I partitioned the main drive and installed Windows 7 in 100 GB of partitioned space. After swapping between the Windows 7 and 8 Boot manager. Ended up choosing the Windows 8 manager.
My problem comes in when I boot into Windows 7, then when I shut down and try and boot into Windows 8 it will hang prior to the boot manager (of Windows 8). I have to press and hold the power button to hard shut down. Once I do that and reboot, Windows 8 Boot manager and Windows 8 boot ok.
So Windows 8 will boot fine if I was last in Windows 8. However if I was last booted in Windows 7 then go to Windows 8 (or try and boot into 7 again, but using the 8 boot manager) it will hang at boot. I've used all the command checks with Windows 7 and 8. Found no errors. I can't reinstall Windows 8 as I don't have recovery disks, plus the computer came from Aarons Rent to Own (they had no issues me doing what I wish with it).
When I switch and use the Windows 7 boot manager I can boot back into Windows 7 even if Windows 7 was my last boot. But like when using the Windows 8 boot manager, I am unable to boot into Windows 8 if Windows 7 was booted last. But Can boot to Windows 8 if Windows 8 was booted last.
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
Can I (correctly) convert my current 8.1 (retail) into VHDX and boot from it using the same 8.1 boot loader or not?
I honestly don't know if I would be running two instances. Would it work if I deleted the C:/ partition and booted the VHD from another disk or partition? Would that be OK? Seems to me it would be two instances but I don't know.
I'm not interested in VMware or VirtualBox - just Hyper-V or some similar bare metal solution. Hyper-V server I could not make work really - it is not what it is designed for - I want wifi, bluetooth etc. Windows server would work but I can not afford it.
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
View 3 Replies View RelatedLate last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
Earlier, about an hour ago, I left to go job searching, and left my computer in hibernate mode so I could bring it back up as soon as I got back. When I tapped keys on the keyboard, the computer powered up as usual, but it brought up the BSoD, stating it was missing files.
Prior to receiving this error, everything was working fine. I even set it to hibernate mode during the night, and it powered on this morning without any problems. I dunno if it's the multimedia keyboard I'm using or what that caused it.
I don't have an installation disc (since I bought it from Fry's Electronics about a year ago with 8 pre-installed), and neither do I have a recovery disc (since I didn't know how to make one.
Computer info: Windows 8 x64
Manufacturer: ASUS
how to fix the missing boot files, and how to do it without causing any data loss from either of my hard drives.
I formatted a HD that had the bootmanager on it. The Win 8 disc can't repair it. I'm also getting a message that my C: drive is locked.
View 6 Replies View RelatedI had windows 7 running on my computer. When windows 8 came out I used a second harddrive as the windows 8 installation drive. Windows 8 automatically setup a dual boot system where every time I started the computer it took me a windows screen where I could select either windows 7 or windows 8. This has been going on since Windows 8 was released.
I decided it was getting old so I decided it was time to remove the old windows 7 harddrive. I tried doing it inside the windows 8 dual boot screen but could not find an option. So I decided to reformat the windows 7 harddrive. I did this in command prompt mode. After doing so when my computer restarted it said it could not find any harddrive to boot. Windows 8 is installed on the other harddrive, the one that was not reformatted. So how do I get it to start using that harddrive as the boot drive? I checked my bios and even physically disconnected the old HD that had windows 7 on it, but none of that seemed to work even though the Windows 8 HD is definitely in the boot order in the bios.
My PC takes its sweet time to boot given the specs it has. (around 1.75 mins) Especially the "black" part seems to take so long. I've fastboot enabled and I use UEFI. how to make the PC boot faster ?
View 9 Replies View Related