My PC takes its sweet time to boot given the specs it has. (around 1.75 mins) Especially the "black" part seems to take so long. I've fastboot enabled and I use UEFI. how to make the PC boot faster ?
View 9 RepliesI have setup Windows 8.1 so it boots directly into the old Windows 7 desktop interface and that works fine for me.
Since I never have any use for the app desktop, is it possible to avoid that desktop from even loading so as to make the boot faster?
When I put Windows 8 in sleep mode (yes sleep mode...I'm not shutting it off), and I turn it on, it sometimes takes up to 5 minutes to respond to any input. I'm wondering what I can check to make sure the minimal apps/programs are running, and there are no unnecessary memory hogs churning in the background? How can I test it, monitor it, and optimize it?
Any issues with Firefox sucking up tons and tons of RAM? When I look in the Task Manager, and sort by Memory, Firefox is ALWAYS at the top of the list. Is there any way to regulate the max memory settings for Firefox?
Any registry tweaks to make my computer faster it isn't slow but I want it to be faster.
View 8 Replies View RelatedI have an HP laptop (G6-2005AX) with the following configuration
CPU: AMD A8-4500M APU 4-cores with Radeon HD Graphics
GPU: AMD Radeon HD 7640G + 7600M Dual Graphics
Memory : 8 GB 1600Mhz DDR3 RAM (2x4GB in dual channel)
Mainboard: Hewlett-Packard 184A
Hard Drive: Seagate ST500LM0 12 HN-M500MBB 500GB 5400RPM
I'm using AVG free 2014 as AV and did a full system scan - no viruses.
The problem is that Windows 8.1 (64bit, pro) boots up really slow - taking upto 6-7 minutes. After it boots up and, well I don't know exactly how to put this - let's say "settles down", everything works as normal. After getting past the password screen, clicking on the desktop tile takes around 1-2 minutes to boot into desktop, after that opening any program (Chrome, MS-Word etc) will take 3-4 minutes - but after it has "settled", everything works as it should.
Also, another curious problem I am facing is that once in a while, when typing my password and logging in, Windows boots into a temporary profile (no apps, blank desktop) and a message appears on the notification area that "windows has logged you on with a temporary profile" or something similar - I need to sign out, then after I sign in again, my real profile gets loaded.
I thought the problem of logging into a temp profile, I thought was that the PC was not verified - I verified it by going to Change PC settings --> Accounts. But after 4-5 days, I see the option of verifying the PC again.
My system has been on completely since 8.1 and has never needed to restart until I did some updates today.
Now I'm not really concerned about shutdown or restart as I will manually shut down the PC if I'm going somewhere for an extended time "I never leave anything on, power for the entire house is shut off" and will shut it off until I get back.
But the slow login is really killing me as it used to take 1 second to hear that little "tick" from the speakers and I'd see the login/splash page, but as of today I will hear that "tick" but the windows dotted circle will spin for oh.. 30 seconds than I can see my splash screen.
I've scanned my C: and D: disks, ran defender, antivirus, etc and all came back fine and I even have 90GB free out of my 120gb drive.
I have a Pavillion DM3 that I have updated to Windows 8 Pro. I have left the Win7 Home on as well and have a dual boot that I was going to keep until I was happy with Windows 8.
Windows 8 installed OK on a new partition and ran very well. I loaded some other software like Office and Acrobat, and it still started and ran very well. I then let it apply the Windows and Office updates (about 70 items). It then took about 10mins to boot. Thinking I had corrupted something, I tried the auto repair, but that didn't work, so I tried refresh and rebuilt the Win 8.
I reinstall all the items I had installed previously, and applied the updates again, but exactly the same problem - very slow to boot. I have now reverted to Win7 again, and it is all working fine again. I have left the HP System partition unchanged, and as the active drive. I did try various boot rebuilds but that didn't work either.
There must be something in the updates that causes this but I don't know how to find out what.
I've had certain problem with my Windows 8 installation . Let me summarize the entire scenario but before that below are my System Details .
System :- Dell Inspiron 17R SE 7720 Laptop .
O/S :- Windows 8.1 .
I formatted my system yesterday and installed Windows 8.1 via MSDN ISO . Installed Dell Drivers and a few programs like Norton 360 etc , after which i shutdown my system yesterday .
When i opened my system today , i was shocked to see Preparing automatic repair message on the Dell boot screen . It tried Automatic repair because it said that Windows was unable to boot properly . However , Automatic repair was unable to do anything .
After that i shutdown my system again and then again powered it on. This time it booted to Windows but took about 5 min to get to the password screen . After booting to Desktop mode , i tried to open chrome , task manager etc , but nothing opened , and the system was painfully slow up until 10 min . After which everything was normal .
Tried to open Event log and it also crashed. I again restarted my system and this time it was lightening fast . Tried to shutdown and restart 2-3 times more , and it was fast all these times .
I've attached a dump of all my logs using SF Diagnostic tool ....
I'm getting soo many problems regarding booting after upgrading to Windows 8 Pro yesterday on my Asus Zenbook UX32A.
Specs:
2nd Gen i3-2367M processor @ 1.4GHz (for Ultrabooks)
6GB DDR3 RAM
500GB HDD + 30GB SSD (for Fast Resume, etc.)
Issue # 1: Whenever I Restart or Shut Down, the system HANGS there and does not progress *most* of the time. To fix this I have to always resort to holding the power button.
Issue # 2: When I boot the PC up, it takes SO long for me to get to the Start menu, around 1:15-1:30 min, which is longer than it took me on W7. I know I have an HDD, but this is abnormally long to me. Once in a blue moon, I will boot up in a matter of 30-40 seconds (which I think is how long it should take), but mostly it takes really long.
Issue # 3: To test the above 2 issues, I went ahead and opened msconfig from Run, and disabled all Non-Microsoft services except AVG to check. When I shutdown and power on - everything is fine, shuts down nicely, powers on nicely - however, the second time I do this, the system will hang on shut down, or will hang on start up, sometimes I can hear the startup sound but nothing on the screen, all sorts of weird actions.
Issue # 4: This one is funny. On standby (lid down), the system will restart itself. Happened while I was sleeping, I could hear the boot sound.
EDIT: The problem is still there when I disable 'Fast Start-Up' in Power Options. The problem is due to the processor state, it keeps resetting to 100%.
Windows 8 is literally taking 2 minutes to Boot!
I am also having an issue with not being able to change the screen resolution. I tried updating drivers. Resolution is set to 1024 x 768. There are no other choices.
Computer information is as follows:
Windows 8 Professional with Media Center (build 9200)
Hewlett-Packard Presario V2000 (ET931UA#ABA) Rev 1
1.80 gigahertz AMD Mobile Sempron
1920 Megabytes Usable Installed Memory
BIOS: Hewlett-Packard F.52 01/20/2007
I am dual booting Windows 8 and win7. I actually have Windows 8 installed on its own hard drive and win 7 installed in its own hard drive. The win7 hard drive has been in use for the past 2 years and I have had Windows 8 running for about a week now. I purchased another hard drive for Windows 8 and left the old Win7 as it was.
I also have 3 other hard drives in the system. Everything is formatted NTFS.
So my system is as follows
Drive C - Boot Drive - I physically swap out the dedicated hard drive for Win 8 or Win 7
Drive D - internal 250 GB sata drive
Drive F - internal 250 GB sata drive
Drive H - internal 250 GB hard drive.
I have been running this config for about 2 years under Win7 with no problems.
The problem that I have now is when I swap the boot drive and boot up a different OS than last time (Like booting Windows 8, powering down system, swap boot drive, boot Win7) the system always says that there are problems on the 3 non-boot drives. It runs chkdsk(it least that is what it look like) and processes the 3 non boot disks one at a time which take about 10-12 minutes for all 3. Most of the time it finds no problems, but about 1 out of 5 boots will find a problem with one of the disks and then fixes it. The disks seem to be OK while I am running. I then power down and swap boot drive and reboot the other os and we start all over again. I am powering the system completely down for each reboot to make sure that the disk cache is flushed.So far the disk problems have been fixed by chkdsk at boot, but I am sure the day will come when the disk cannot be fixed and I will loose data.
I recently upgraded my 250 gb SSD with a 1 Tb one. I used the Samsung migration software to copy the drive and then disconnected the 250 gb drive so things wouldn't get confusing for me.
Everything seemed to work well with the 1 Tb drive. Windows booted extremely fast as usual and it looked like everything was running the way it was before.
Today I reinstalled the 250 gb SSD with the intent to use it for backups. It came partitioned, so I deleted the partition via the windows disk manager and reformatted the now single partition. The drive itself seems to be fine.
The problem is that when windows 8.1 boots, it displays the window logo as usual, but there's a 25 second delay in doing the rest of the booting. The screen is entirely blank, so I have no idea what it's doing. The hard drive light on the CPU blinks, though. The boot order on my bios is correct. I'm not sure why it's so slow to boot now.
The other thing I noticed is that when I click on my Computer icon, the drives take awhile to list. A progress bar slowly advances at the top of the window. Once I've done this once, the drives display quickly, but whatever happened is reset when I reboot the computer.
I set up a dual boot with Windows 7 and 8 and it is extremely slow up until the Windows 7 and 8 appear. From that point on both load quickly. Also under the Windows 7 icon it says "recovered". Otherwise eveerything seems to be functioning normally.
View 9 Replies View RelatedJust upgraded my gfx card from a nvidia 560 gtx to a nvidia 670, and my PC is taking like 1 minute to boot now. It used to be like 15 seconds..
Specs:
Windows 8 Pro 64bit
i5 3570K @ 4.4ghz
nvidia 670
8GB RAM 1600mhz
samsung 840 SSD 256gb
seagate barracuda 500gb
650w ocz PSU
Z77 D3H motherboard
Tried:
remove the old gfx drivers last night, using driver sweeper, cleaned the registry etc, but it hanged on post [where you see your motherboards bios logo and what keys to press etc] for the first time with the new card in, downloaded the gfx drivers for it and it still hangs on post after install.
Tried playing a couple of games that are on my SSD and on my HDD and performance is perfect.
Loaded up samsung SSD magician and 'optmized' the ssd and benchmarked, 550 read 250 write speed.
Tried my USB and PS/2 keyboard, doesn't register keys to get into BIOS, so can't flash it.
Tried unplugging all USB devices and still hanging on post, takes a good minute or 2.
Also checked my C: drive with the OS on using error checking and it found none.
Not long reinstalled windows 8 either...
Certain softwares you want always running.
View 5 Replies View RelatedWindows 8 64bit, 6gb RAM, Graphics card Gainward GTX460 In the last week boot up has been very slow and the screen resolution is lower than recommended (1920x1080) at 1024x768 . Then the mouse smears across the desktop until I change the resolution to the recommended 1920x1080. Is the problem in Windows 8 or the graphics card. How can I test the graphics card?
View 3 Replies View RelatedI have a Samsung NP9000 model NP900X4C-A05AU. It regularly crashes due to full memory. It has 8G of RAM, running Windows 8.1. It's done this since day 1 - I managed to remove some Samsung bloatware that mitigated the problem somewhat, i.e. from once a day to three times a week. Mostly, just before it happens I get the "close some programs or lose some data" message, and I can possibly kill something (chrome usually) to free some memory so I can reboot cleanly. Usually at this point, the "Modified" section of the Task Manager Memory usage tab is quite big. Reboot and it's good for another couple of days.
Sometimes the "close some programs" message is too late... I get the message and almost immediately Windows crashes and reboots. Up until last week, this didn't cause any issues after the reboot. But last week, it did this, gave me the message and immediately crashed. It took about 1 hour for it to reboot, sitting at the "please wait" dots. I was in the process of making a recovery USB to boot from when it finally came to life. Everything seemed ok, was able to start things up, and carried on as usual. Couple of days later, get the "close some programs" message, and am able to reboot. But the laptop takes 5 to 10 minutes to reboot. Up until I had this issue, a reboot would take 5 to 10 seconds (to get to the login prompt). Even a reboot after just rebooting takes 5 to 10 minutes. I've run scans on my SSD, it says everything is ok. Every reboot now takes 5 to 10 minutes.
When booting, my windows 8.1 is slow to do load. After windows logo, it goes to a black screen for around 10 secs, then it finally logs into the Start menu. I know this is not normal because I have seen the system boot faster in the past, but I don't know why its doing it now.
I have done a fresh install of windows 8 and update to 8.1. I made to to have Fast Boot enabled.
I have haswell, so I made to update to the latest graphics drivers by Intel.
On a second note: I am triple booting: osx/linux/win with Chamelon boot loader. However, I doubt its an issue with triple boot because the black screen occurs AFTER windows logo, meaning windows has successfully loaded.
I have over 600 GB on my HDD from games, media, and files. I bought a 250GB SSD to boot my OS off of and put some selected programs on. Even after deselecting all my media files, there is still too much on my HDD for the included Samsung clone client to proceed. I just want to use my new SSD as a boot drive for the OS and for several programs while retaining all my other files on my existing HDD.
View 4 Replies View RelatedI received my laptop (Dell 17r SE) about a week ago but I have been having trouble with it's boot time. From pushing the power button, it takes anywhere between 5 and 10minutes to arrive at the login screen.
I checked the event log for Diagnostic-Performance, and the eventID100 has popped up quite a lot as "critical." I go into details and the stats are not looking to good. These are the times for multiple boots:
BootTime 175799/153962/217864/640216(This one was the first startup that the laptop ever did)
MainPathBootTime 122899/90262/135072/564816(This one was for the first startup that the laptop ever did)
Along with that critical error, I get other warnings saying apps/drivers/services like Svchost, rdbss, gpsvc, SMSSInit took longer than expected to initialise, thereby slowing startup.
I'm not sure if this is useful but apart from that, the log also shows EventID500/501 error events that state that The Desktop Window Manager responsiveness has degraded due to heavy resource contention.
Just running some tests on three average external USB2 HDD (self powered) 1TB drive -- Thicker older WD model -- not the Passport type but still self powered.
On a USB2 connection the data transfer still around 50% FASTER than when formatted with standard MBR.
Unless you NEED the older MBR system I can't see ANY disadvantages to making all my disks GPT where possible - except for the small SSD I have as my Boot disk -- even on a non UEFI system (where a GPT disk won't be bootable - but perfectly fine for DATA etc).
I just got a refurbished ASUS K75DE laptop, and it came with Windows 8 on it. I am wanting to run a dual boot with Win7, so I disabled fast-boot just fine, and went into the UEFI BIOS and disabled the secure boot.
While I was there, I did like I have always done and set a BIOS boot-up password. I then proceed to boot to my Win7 installer USB Flash drive, but I was running low on battery power so I aborted the install and shut the computer down to try again later.
Now however when I get into BIOS to select boot priority, all options are grayed out except for system time and a few other non-essentials. At the bottom of the first BIOS screen it says "User Level : User" and I can't seem to find a way to reverse this issue. So now I'm stuck, can't boot to anything but the HDD because it is first by default.
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
Can I (correctly) convert my current 8.1 (retail) into VHDX and boot from it using the same 8.1 boot loader or not?
I honestly don't know if I would be running two instances. Would it work if I deleted the C:/ partition and booted the VHD from another disk or partition? Would that be OK? Seems to me it would be two instances but I don't know.
I'm not interested in VMware or VirtualBox - just Hyper-V or some similar bare metal solution. Hyper-V server I could not make work really - it is not what it is designed for - I want wifi, bluetooth etc. Windows server would work but I can not afford it.
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
View 3 Replies View RelatedLate last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
Client computer that shows black screen with text at boot up. Cannot boot into Windows 8 (8.1?)
This is what is on the black screen;
Your PC needs to restat.
Please hold down your power button.
Error Code 0x0000012a
Parameters:
0x0000000000000001
0x0000000000000046
0x0000000000000000
0x0000000000000000
After re-boot a message shows
Prepairing Auto Repair
Diagnosing PC
PC Did Not Start correctly either with 2 options - Restart and trying any of the Advanced Options
Restart option did nothing but restart this cycle of BSOD, etc. Advanced options to troubleshoot (Refresh, Reset, System Repair, Command Prompt are not available due to the following message:" You need to sign in as an administrator to continue, but there aren't any administrator accounts on this PC"
No system recovery disks or Windows 8 Installation media available.
PS :Cannot boot into Windows 8
Earlier, about an hour ago, I left to go job searching, and left my computer in hibernate mode so I could bring it back up as soon as I got back. When I tapped keys on the keyboard, the computer powered up as usual, but it brought up the BSoD, stating it was missing files.
Prior to receiving this error, everything was working fine. I even set it to hibernate mode during the night, and it powered on this morning without any problems. I dunno if it's the multimedia keyboard I'm using or what that caused it.
I don't have an installation disc (since I bought it from Fry's Electronics about a year ago with 8 pre-installed), and neither do I have a recovery disc (since I didn't know how to make one.
Computer info: Windows 8 x64
Manufacturer: ASUS
how to fix the missing boot files, and how to do it without causing any data loss from either of my hard drives.
Windows 8.1 failing to boot when any usb storage drive is plugged in during boot. My only solution is to unplug everything each boot unless I use my KVM switch which does not support usb 3.0.
View 2 Replies View RelatedI have noticed that applications that are launched from the Metro IU load and run much faster than the same applications launched from IE under desktop. I have even created Metro tiles for applications I normally run as they load and run much faster than launching them from the desktop. This site (Windows Eight Forms) would not load from desktop IE but loads immediately from a Metro tile I created.
View 4 Replies View Related