Maintenance :: Windows 8 Very Slow Boot And Can't Change Screen Resolution
Dec 21, 2012
Windows 8 is literally taking 2 minutes to Boot!
I am also having an issue with not being able to change the screen resolution. I tried updating drivers. Resolution is set to 1024 x 768. There are no other choices.
Computer information is as follows:
Windows 8 Professional with Media Center (build 9200)
Hewlett-Packard Presario V2000 (ET931UA#ABA) Rev 1
1.80 gigahertz AMD Mobile Sempron
1920 Megabytes Usable Installed Memory
BIOS: Hewlett-Packard F.52 01/20/2007
Windows 8 64bit, 6gb RAM, Graphics card Gainward GTX460 In the last week boot up has been very slow and the screen resolution is lower than recommended (1920x1080) at 1024x768 . Then the mouse smears across the desktop until I change the resolution to the recommended 1920x1080. Is the problem in Windows 8 or the graphics card. How can I test the graphics card?
I have a gateway NE56R41u. With that aside, today i played the sims 3 when it has a warning about my graphics card or whatever, so i went to my screen resolution to see if i can fix the problem. Unfortunately, the place where i can choose what my resolution is greyed out, so i cannot change a thing. Heres a picture .....
My PC takes its sweet time to boot given the specs it has. (around 1.75 mins) Especially the "black" part seems to take so long. I've fastboot enabled and I use UEFI. how to make the PC boot faster ?
When booting, my windows 8.1 is slow to do load. After windows logo, it goes to a black screen for around 10 secs, then it finally logs into the Start menu. I know this is not normal because I have seen the system boot faster in the past, but I don't know why its doing it now.
I have done a fresh install of windows 8 and update to 8.1. I made to to have Fast Boot enabled.
I have haswell, so I made to update to the latest graphics drivers by Intel.
On a second note: I am triple booting: osx/linux/win with Chamelon boot loader. However, I doubt its an issue with triple boot because the black screen occurs AFTER windows logo, meaning windows has successfully loaded.
My system has been on completely since 8.1 and has never needed to restart until I did some updates today.
Now I'm not really concerned about shutdown or restart as I will manually shut down the PC if I'm going somewhere for an extended time "I never leave anything on, power for the entire house is shut off" and will shut it off until I get back.
But the slow login is really killing me as it used to take 1 second to hear that little "tick" from the speakers and I'd see the login/splash page, but as of today I will hear that "tick" but the windows dotted circle will spin for oh.. 30 seconds than I can see my splash screen.
I've scanned my C: and D: disks, ran defender, antivirus, etc and all came back fine and I even have 90GB free out of my 120gb drive.
I have a Pavillion DM3 that I have updated to Windows 8 Pro. I have left the Win7 Home on as well and have a dual boot that I was going to keep until I was happy with Windows 8.
Windows 8 installed OK on a new partition and ran very well. I loaded some other software like Office and Acrobat, and it still started and ran very well. I then let it apply the Windows and Office updates (about 70 items). It then took about 10mins to boot. Thinking I had corrupted something, I tried the auto repair, but that didn't work, so I tried refresh and rebuilt the Win 8.
I reinstall all the items I had installed previously, and applied the updates again, but exactly the same problem - very slow to boot. I have now reverted to Win7 again, and it is all working fine again. I have left the HP System partition unchanged, and as the active drive. I did try various boot rebuilds but that didn't work either.
There must be something in the updates that causes this but I don't know how to find out what.
I've had certain problem with my Windows 8 installation . Let me summarize the entire scenario but before that below are my System Details .
System :- Dell Inspiron 17R SE 7720 Laptop . O/S :- Windows 8.1 .
I formatted my system yesterday and installed Windows 8.1 via MSDN ISO . Installed Dell Drivers and a few programs like Norton 360 etc , after which i shutdown my system yesterday .
When i opened my system today , i was shocked to see Preparing automatic repair message on the Dell boot screen . It tried Automatic repair because it said that Windows was unable to boot properly . However , Automatic repair was unable to do anything .
After that i shutdown my system again and then again powered it on. This time it booted to Windows but took about 5 min to get to the password screen . After booting to Desktop mode , i tried to open chrome , task manager etc , but nothing opened , and the system was painfully slow up until 10 min . After which everything was normal .
Tried to open Event log and it also crashed. I again restarted my system and this time it was lightening fast . Tried to shutdown and restart 2-3 times more , and it was fast all these times .
I've attached a dump of all my logs using SF Diagnostic tool ....
I have an HP laptop (G6-2005AX) with the following configuration
CPU: AMD A8-4500M APU 4-cores with Radeon HD Graphics GPU: AMD Radeon HD 7640G + 7600M Dual Graphics Memory : 8 GB 1600Mhz DDR3 RAM (2x4GB in dual channel) Mainboard: Hewlett-Packard 184A Hard Drive: Seagate ST500LM0 12 HN-M500MBB 500GB 5400RPM
I'm using AVG free 2014 as AV and did a full system scan - no viruses.
The problem is that Windows 8.1 (64bit, pro) boots up really slow - taking upto 6-7 minutes. After it boots up and, well I don't know exactly how to put this - let's say "settles down", everything works as normal. After getting past the password screen, clicking on the desktop tile takes around 1-2 minutes to boot into desktop, after that opening any program (Chrome, MS-Word etc) will take 3-4 minutes - but after it has "settled", everything works as it should.
Also, another curious problem I am facing is that once in a while, when typing my password and logging in, Windows boots into a temporary profile (no apps, blank desktop) and a message appears on the notification area that "windows has logged you on with a temporary profile" or something similar - I need to sign out, then after I sign in again, my real profile gets loaded.
I thought the problem of logging into a temp profile, I thought was that the PC was not verified - I verified it by going to Change PC settings --> Accounts. But after 4-5 days, I see the option of verifying the PC again.
I'm getting soo many problems regarding booting after upgrading to Windows 8 Pro yesterday on my Asus Zenbook UX32A.
Specs:
2nd Gen i3-2367M processor @ 1.4GHz (for Ultrabooks)
6GB DDR3 RAM
500GB HDD + 30GB SSD (for Fast Resume, etc.)
Issue # 1: Whenever I Restart or Shut Down, the system HANGS there and does not progress *most* of the time. To fix this I have to always resort to holding the power button.
Issue # 2: When I boot the PC up, it takes SO long for me to get to the Start menu, around 1:15-1:30 min, which is longer than it took me on W7. I know I have an HDD, but this is abnormally long to me. Once in a blue moon, I will boot up in a matter of 30-40 seconds (which I think is how long it should take), but mostly it takes really long.
Issue # 3: To test the above 2 issues, I went ahead and opened msconfig from Run, and disabled all Non-Microsoft services except AVG to check. When I shutdown and power on - everything is fine, shuts down nicely, powers on nicely - however, the second time I do this, the system will hang on shut down, or will hang on start up, sometimes I can hear the startup sound but nothing on the screen, all sorts of weird actions.
Issue # 4: This one is funny. On standby (lid down), the system will restart itself. Happened while I was sleeping, I could hear the boot sound.
EDIT: The problem is still there when I disable 'Fast Start-Up' in Power Options. The problem is due to the processor state, it keeps resetting to 100%.
I received my laptop (Dell 17r SE) about a week ago but I have been having trouble with it's boot time. From pushing the power button, it takes anywhere between 5 and 10minutes to arrive at the login screen.
I checked the event log for Diagnostic-Performance, and the eventID100 has popped up quite a lot as "critical." I go into details and the stats are not looking to good. These are the times for multiple boots:
BootTime 175799/153962/217864/640216(This one was the first startup that the laptop ever did) MainPathBootTime 122899/90262/135072/564816(This one was for the first startup that the laptop ever did)
Along with that critical error, I get other warnings saying apps/drivers/services like Svchost, rdbss, gpsvc, SMSSInit took longer than expected to initialise, thereby slowing startup.
I'm not sure if this is useful but apart from that, the log also shows EventID500/501 error events that state that The Desktop Window Manager responsiveness has degraded due to heavy resource contention.
While using the computer, periodically when I go to the start screen and search for something, it just hangs for about 20-60 seconds before responding. Now today, every single time I start the computer, it loads fine gets me to the start screen, but if I type anything for the search then it freezes on me for 20-60seconds. If I start it and immediately go to the desktop, I can run SOME programs like IE or Chrome but NOT Ventrilo or games (for 20-60 seconds). Also, TASK manager will not come up nor do any of the windows 8 "charms" work for that time frame.
I am at a loss, this is a fresh OS install about a month ago on a brand new Samsung 840 SSD. All my drivers are up to date, I didn't have this issue a week ago but I did have a system restore point that I restored my computer to and that didn't fix it.
I also tried the Windows Startup Repair, and it tells me it could not repair it and to check my log at "F:/Window...." whereas I have NO F:/ drive and Windows is obviously installed on my C:/ drive (also, it will not allow me to "refresh" my computer. *I have legit Windows 8 Keys that I purchased
I have tried disabling the fast boot in power options. I have ran a registry cleaner (ccleaner, I hate running cleaners but it was a desperate measure). I tried creating a new user account.
I checked my Event Viewer and these are common errors I am seeing:
The driver DriverWudfRd failed to load for the device SWDWPDBUSENUM{69d0e255-85f2-11e3-be67-806e6f6e6963}#0000000000100000.
The server {9BA05972-F6A8-11CF-A442-00A0C90A8F39} did not register with DCOM within the required timeout.
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{C2F03A33-21F5-47FA-B4BB-156362A2F239}
and APPID
{316CDED5-E4AE-4B15-9113-7055D84DCC97}
To the user NT AUTHORITYLOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
OK, what I want to do is the same that a lot of users that have their smartphones (Android OS), is change the original DPI o screen resolution (force a different scale/resolution) For example: what I'm trying to say of Android OS is when you want more space avaible on your desktop or the objects/texts/sidebar/icons/etc... looks like smaller than before, you just need to go to this directory (/system) and edit the file (build.prop) and finally locate the line called (ro.sf.lcd_density=xxx) and change the original density number of your screen's device by other smaller; and when you'll restart the device you'll have the same os similar size's desktop of one Note 3 in your SGS3 mini.
So, in resume. I would like to have a 1920x1080 (for example, or smaller I don't know what resolution is correct for my case), from my actual resolution of my laptop that it's 1280x800 pixels.
And for more details: - Windows 8.1 Pro (x86) - Resolution 1280x800 (15,4") and 16:10 - Graphic Adapter Intel Graphics Media Accelerator (GMA) 950 (Intel GMA 945 GM) - Only the original monitor (laptop), not an external monitor
i need to backup all data i have on laptop as my hard is dying, so the only way i have now is to transfer all data to my old pc desktop but i have a problem as my desktop monitor is broken but my pc is ok with windows 7 so i need to make my TV hisense as monitor but when i connect it using vga no picture appears so how can i install tv on pc without any monitor or change resolution ?
I currently have a 15" PC with a 3200x1800 resolution. Using Windows 8.1. I have the scaling to highest.
My 2nd external monitor is 1920 x 1200.
I am trying to extend my desktop to the 2nd monitor but is there a way to use different scaling for both the PC and monitor?
I have unchecked "use scaling for all my displays" but no matter what, I still can't change the scaling on the external display. It uses the scaling settings of my PC (scaling set to highest because of 3200x1800 resolution) and because of that, the monitor scaling shows everything large.
Each time I start the computer is is necessary for me to adjust the screen resolution to cause the screen tiles to appear when clicking "start" on the right side of the screen. What am I not doing? When I open the computer the next time I adjust the screen resolution back to a different setting and the tiles come up.
Also (I'm obviously a newcomer to W. 8), I get a dialogue box each time which refers to to: "RUNDll". Something about an issue with opening something???? I click "OK" and it goes away. Appears every time I start up.
I have a msi u270 with an amd e-450 but the res is only 1024*600. I saw about the changing of the value for an index file called "Display1_DownScalingSupported" but i cannot seem to find it. I tried installing drivers and then tried but could not find it then i tried again with the latest beta drivers from the amd website but i cannot find that.
I'm using win 8.1 with a 2560 x1440 resolution, but I can't seem to get split screen to work. I've tried a few tutorials online, but without success.
I can easily split the screen by left mouse clicking the top of the screen and dragging down. The first window works normally with task bar showing on the bottom, but I can't figure out how to get anything else in the 2nd window that is created. One online tutorial mentioned something about executing a mouse-over on the left or upper left corner, but that doesn't bring anything up. I can get the search/share/start/devices/settings task bar to appear by mouse-overing the upper right hand corner, but this doesn't lead to filling the second window.
Just got a new Toshiba laptop and plugged it into my Emerson 32" tv/monitor and the top, sides and bottom expand beyond the scope of the screen. I have Windows 8 and have adjusted the screen resolution from the highest to the lowest but it does not make a difference.
I recently upgraded my 250 gb SSD with a 1 Tb one. I used the Samsung migration software to copy the drive and then disconnected the 250 gb drive so things wouldn't get confusing for me.
Everything seemed to work well with the 1 Tb drive. Windows booted extremely fast as usual and it looked like everything was running the way it was before.
Today I reinstalled the 250 gb SSD with the intent to use it for backups. It came partitioned, so I deleted the partition via the windows disk manager and reformatted the now single partition. The drive itself seems to be fine.
The problem is that when windows 8.1 boots, it displays the window logo as usual, but there's a 25 second delay in doing the rest of the booting. The screen is entirely blank, so I have no idea what it's doing. The hard drive light on the CPU blinks, though. The boot order on my bios is correct. I'm not sure why it's so slow to boot now.
The other thing I noticed is that when I click on my Computer icon, the drives take awhile to list. A progress bar slowly advances at the top of the window. Once I've done this once, the drives display quickly, but whatever happened is reset when I reboot the computer.
I set up a dual boot with Windows 7 and 8 and it is extremely slow up until the Windows 7 and 8 appear. From that point on both load quickly. Also under the Windows 7 icon it says "recovered". Otherwise eveerything seems to be functioning normally.
remove the old gfx drivers last night, using driver sweeper, cleaned the registry etc, but it hanged on post [where you see your motherboards bios logo and what keys to press etc] for the first time with the new card in, downloaded the gfx drivers for it and it still hangs on post after install.
Tried playing a couple of games that are on my SSD and on my HDD and performance is perfect.
Loaded up samsung SSD magician and 'optmized' the ssd and benchmarked, 550 read 250 write speed.
Tried my USB and PS/2 keyboard, doesn't register keys to get into BIOS, so can't flash it.
Tried unplugging all USB devices and still hanging on post, takes a good minute or 2.
Also checked my C: drive with the OS on using error checking and it found none.
I just installed Windows 8, and each time I boot up my resolution reverts to 800x600 even though my native is 1680x1050. I have to constantly change it after login. I hope this is a simple fix, this is the first time I'm using Windows 8 as my normal OS.
i have lenovo z580 laptop with windows8. Initially when i purchased it, i remember that it had resolution of 1920*1080 working. But since a week i notice that the screen resolution has down graded to 1366*768 and am unable to set it back to 1920*1080, as the screen resolution slider does not show up that option at all.
My Dell Inspiron 660 is 2 months old. It came with Windows 8 preinstalled. My problem: I am trying to change the boot order so I can boot from CD ROM as a first option. I have tried using the "F" keys on boot, but it just ignores me and goes on to boot up. I have also tried the "Advanced Options > UEFI Firmware Settings" in "Change PC Settings" and got the same results. I spent some time on the phone with a Dell tech. After trying all the things I had already tried, he and his supervisor decided I must have a bad Motherboard. Does this sound right? Is there any way to repair this problem?
.I have an HP Pavilion Slimline PC desktop. It does not allow me to boot from CD/DVD drive or USB connection. Windows 8.1. I wish to be able to use the boot options cd/dvd and all the USB options. I can't use any of the options. I list bios setup options and suggestions given to me from articles but I'm not sure I'm afraid of error. I don't have that much experience in bios setup.
Articles have said in BIOS setup Security is to be disabled. I suppose Legacy remains disabled(?). It is suggested that I shutdown and reboot.
BIOS Setup > Storage > Boot Order has this list: UEFI Boot Sources Windows Boot Manager USB Floppy/CD[code]....
At bottom of this Boot Order Window are the options: F5=disable Enter=drag F10=accept ESC=cancel
Windows Boot Manager at the the top stops all other options.beneath it. How does that 'drag' work. Don'tr I have to move 'Windows Boot Manager' to the bottom?
And move ATAPI CD/DVD drive to the top? of this UEFI boot sources list?
Is it true that if there is an error in the BIOS Boot Setup and Windows 8.1 does not boot, the BIOS Setup will come up instead so one can do a fix?
My netbook(Samsung NC110 with 1024*600 Screen Resolution and Intel GMA 3150) is running Windows 8.1 x64 now. I want to use all features of Windows 8, so i want to set Custom resoltion like 1366*768. I was trying to change some keys in the regedit, but the picture was very bad, cause my screen is 16:9, and 1024*768 or 1152*864 resolutions is 4:3. I want to get some utility to set Custom Resolutions, that bigger that real resolution of my display.
