i have lenovo z580 laptop with windows8. Initially when i purchased it, i remember that it had resolution of 1920*1080 working. But since a week i notice that the screen resolution has down graded to 1366*768 and am unable to set it back to 1920*1080, as the screen resolution slider does not show up that option at all.
View 4 RepliesSo I have Acer Aspire E1-570G that has 1366x768 max resolution, but is there any way to put it's resolution to 1920x1080? After using my friend's laptop (Acer Aspire V) that has 1920x1080 resolution.
View 9 Replies View RelatedHeres a little about my setup:
Lenovo Z580
Windows 8 Pro
1 single HDD split into 2 partitions, 1 for windows / program files, the other (data) for my data / downloads etc.
1 User account (administrator)
This began happening about a week ago, i first noticed it when i tried to download a file via Google Chrome, when i tried to save the file to my HDD (a 2nd partition on my disk) chrome told me I don't have permissions to save to this folder and that i should try to save it to user/downloads/ instead.
Since then I've found I am no longer able to write to that partition without either being prompted for elevated privs or being denied totally.
For example:
Download a file from the internet with chrome/firefox/IE
Extracting rar/zips files via right-click (i have to open them in winrar, and extract manually)
Create a folder in explorer: "Destination folder access denied", "You need confirm this operation"
I have UAC Settings are set to "Never Notify"
I've tried taking Ownership of every file/folder on my data drive
I've uninstalled all software (there where 3 applications installed since this started happening)
I've removed all windows updates since this started happening
Now I've ran out of things to try...
I fail to understand why on a laptop (which has no touchscreen) why you would want to have the swipe gestures?
Surely most folks don't look at the touchpad in use, so it is often that one starts off to the right (especially when the pad is off centre), and it is natural to move to the left to find where one wants to start - hey presto the charms bar opens, and if you're not carefull all sorts of events occur which you really don't want.
Any way on my Lenovo Z580 with synaptics 8.1 we have the worst of both worlds - there is no easy option in the Synaptics settings to turn off the gestures, so the option is to do registry editing to the key TouchPadPS2_3 - I have amended the Active Type dwords from 2 to 0. However there is a side effect of this.
When booting, there is now a delay till the process finishes - we now get blue circular processes next to the pointer for approx 40 seconds.
What other edits we need to make to remove this delay?
Here is the registry for the right edgepull:
[HKEY_CURRENT_USERSoftwareSynapticsSynTPEnhoneConfigTouchPadPS2_3Right Edge Pull]
"ConfigFlags"=dword:000e0141
"PalmCheckFlags"=dword:00000000
"ConfigFlagsEx"=dword:00040640
"LoXRel"=dword:ffffc568
"HiXRel"=dword:00000000
"LoYRel"=dword:00001388
"HiYRel"=dword:ffffec78
[Code]...
Ok so i have 2 months lenovo ideapad z580 laptop..i am unable to access UEFI BIOS menu and boot menu anymore these were the steps i tried with my laptop.
1) I have windows 8.1 tried going to pc settings and selected uefi settings on restart But the problem still persist the laptop is just doing normal windows 8 boot
2) Tried pressing/hitting F1,F2,F12,DEL keys
3) I have also used lenovo one key recovery button there it showed "bios setup" when i selected it and hit enter it is just doing normal windows 8 boot still i can't access uefi bios
4) Tried updating BIOS for the laptop but unfortunately there was no bios update for this model
5) Tried resetting Laptop by removing battery and ac adapter and pressing and holding power button for 30 seconds but still no use i can't access BIOS yet
6) I tried removing the internal hard drive Out of the laptop and this time one starnage thing happened " before with internal hard drive i used to get lenovo splash screen when turning ON but after removing hard drive and when i try to access bios i can't see the lenovo splash screen at all" still i can't access BIOS!!!
7) I even have tried holding down Shift key, letter B when starting up the laptop but still didn't work seems like windows 8.1 makes changes to BIOS?
I have a Lenovo Z580 running Windows 8 on a 256 GB SSD, which was cloned from the original drive using Paragon cloning software. I got the computer up and running about a month ago, and I started personalizing it by installing programs and such. At the beginning of today, I probably had around 25 GBs left of storage, which may not seem like much but it will last me until I need to be done with this computer.
Today I went to download a 5 GB zipped folder used to install MATLAB via a licensed, legit website (student license). I check after it downloads and I have roughly 20 GB left on my disk. Note that every other program I have installed has had no trouble with Windows 8 (including Mathematica), so I assumed MATLAB wouldn't either. I hit the setup button, and nothing seems to come up. I hit it again and this time it says something like "not allowed to create destination." So then I tried cutting and pasting it to the desktop, but there was some error with that too. I tried to use the setup application in other ways, and it still didn't work.
I then checked my free disk space and I had 100 MB of free space left. Uhm WHAT?! What the hell just happened?! I search through pretty much ALL my file folders to see what was newly written and see if I could find a TWENTY GIGABYTE folder that was created today. I couldn't find anything. What I think happened was that the setup application unpacked a bunch of files from the compressed folder SOMEWHERE on my disk, EACH TIME I hit setup. THEN it would hit a snag, for some reason, and stop the setup, and NOT delete the temporary files.
SO my next step was to use the "Disk Cleanup" option, to see if the theoretical temporary files could be deleted that way. It gets to the list and I discover that the "Temporary files" option is an INCREDIBLE 98.6 GB size. UHM WHAT?! How is it possible that my OS thinks it can safely delete nearly 100 GBs of data off my 256 GB hard drive?! What is it deleting exactly? Let's assume that 20 GB was in there; that still means it's deleting almost 80 GBs. I couldn't believe that. So obviously I haven't deleted that yet, because I fear that it thinks some of my programs, or maybe even the OS itself, is a bunch of temporary files. I don't even know. I do have a 30 GB recovery partition, so maybe that 30 is included in that, but EVEN THEN 50 GBs is a TON to be in temporary files.
My question: is there any way to check what will be deleted in the option "Temporary files" and why is my temporary files 38% of my entire drive? Also, what happened with the 20 GBs?
I labelled it urgent because I need to install MATLAB to use it for HW, but I can't. Well I think I can find another way to use it, however I still need this problem fixed ASAP because I need space on my computer to do stuff in general.
I am using a Ideapad Z580 with Windows 8.1 64 bit. All was working fine. But I formatted the C drive and reinstalled my Windows 8.1 OS. Then I installed all my drivers. After a reboot the screen started to jump(flickering).The top part of the screen(small portion) is appearing and disappearing in the bottom area. I tried to change the refresh rate.But it is locked in 60,and no other options are available.
View 1 Replies View RelatedUpdated to 8.1 by connecting to hi res montor and then been able to use win 8.1 later on netbook screen?
View 3 Replies View RelatedEach time I start the computer is is necessary for me to adjust the screen resolution to cause the screen tiles to appear when clicking "start" on the right side of the screen. What am I not doing? When I open the computer the next time I adjust the screen resolution back to a different setting and the tiles come up.
Also (I'm obviously a newcomer to W. 8), I get a dialogue box each time which refers to to: "RUNDll". Something about an issue with opening something???? I click "OK" and it goes away. Appears every time I start up.
I have a windows 8 64 bit lenovo g 580 20157 ...
Unable to access bios or uefi, when I try to access uefi pc just restarts. Ihave disabled quick start up in windows ...
Also when i boot up pc and able to get menu go to bios or boot option just boots into windows ...
I was having problems getting to the boot menu of my Lenovo G580 laptop earlier.
I figured out how to get the boot menu - But my only options are hard drive, LAN v4 and LAN v6 boot - Nothing about a disc. So I went into the BIOS boot priority menu and set disk to #1 - It still booted to my hard drive!
How do I get "Screen Resolution" (on desktop, right click and select Screen Resolution) to show my main monitor as "1"?
View 5 Replies View RelatedJust got a new Toshiba laptop and plugged it into my Emerson 32" tv/monitor and the top, sides and bottom expand beyond the scope of the screen. I have Windows 8 and have adjusted the screen resolution from the highest to the lowest but it does not make a difference.
View 3 Replies View RelatedI have a gateway NE56R41u. With that aside, today i played the sims 3 when it has a warning about my graphics card or whatever, so i went to my screen resolution to see if i can fix the problem. Unfortunately, the place where i can choose what my resolution is greyed out, so i cannot change a thing. Heres a picture .....
View 3 Replies View Relatedi am trying to enable snap on my 19" 1280x1024 screen but i cant find a way how to do achieve that
View 4 Replies View RelatedI have a msi u270 with an amd e-450 but the res is only 1024*600. I saw about the changing of the value for an index file called "Display1_DownScalingSupported" but i cannot seem to find it. I tried installing drivers and then tried but could not find it then i tried again with the latest beta drivers from the amd website but i cannot find that.
View 2 Replies View RelatedI just changed my laptop's OS to Windows 8 but somehow, I can't change my screen resolution the way it was before.
Here's a screenshot: [URL] .....
And when i go to desktop, right-click then screen resolution, there's only 1 option available.
Here's how it looks like: [URL] .....
And as you can see, the "Resolution" option won't show any other options aside from 1024x768.
I just installed Windows 8, and each time I boot up my resolution reverts to 800x600 even though my native is 1680x1050. I have to constantly change it after login. I hope this is a simple fix, this is the first time I'm using Windows 8 as my normal OS.
View 9 Replies View RelatedMy netbook(Samsung NC110 with 1024*600 Screen Resolution and Intel GMA 3150) is running Windows 8.1 x64 now. I want to use all features of Windows 8, so i want to set Custom resoltion like 1366*768. I was trying to change some keys in the regedit, but the picture was very bad, cause my screen is 16:9, and 1024*768 or 1152*864 resolutions is 4:3. I want to get some utility to set Custom Resolutions, that bigger that real resolution of my display.
View 4 Replies View RelatedI'm using win 8.1 with a 2560 x1440 resolution, but I can't seem to get split screen to work. I've tried a few tutorials online, but without success.
I can easily split the screen by left mouse clicking the top of the screen and dragging down. The first window works normally with task bar showing on the bottom, but I can't figure out how to get anything else in the 2nd window that is created. One online tutorial mentioned something about executing a mouse-over on the left or upper left corner, but that doesn't bring anything up. I can get the search/share/start/devices/settings task bar to appear by mouse-overing the upper right hand corner, but this doesn't lead to filling the second window.
Windows 8 is literally taking 2 minutes to Boot!
I am also having an issue with not being able to change the screen resolution. I tried updating drivers. Resolution is set to 1024 x 768. There are no other choices.
Computer information is as follows:
Windows 8 Professional with Media Center (build 9200)
Hewlett-Packard Presario V2000 (ET931UA#ABA) Rev 1
1.80 gigahertz AMD Mobile Sempron
1920 Megabytes Usable Installed Memory
BIOS: Hewlett-Packard F.52 01/20/2007
I'm using my laptop MSI GE60-2OE. When I first boot into the system, everything looks fine
But after using for a while, the display becomes odd. Every item becomes bigger than normal and the entire screen seems bigger than the screen size
Even worse, in the desktop mode, the taskbar change to strange state and the menu start is disabled
This problem happens when I set the screen resolution at 1920*1080. Things change back to normal when I reduce the resolution to 1600*900.
My new Acer laptop has very disappointing screen and video quality. The screen resolution is maxed-out at 1366 x 768 with Intel HD Graphics 4000. Those specs should be just fine for great visuals. My old desktop didn't come close to that but I could watch Youtube videos very well with no pixeling of image. Acer tech support said "new graphics driver download" and I did that , to no avail. Setting adjustments etc.? My wife's 3 year old Acer has better screen quality than my new one.
View 9 Replies View RelatedI'm running Vista 64 and tried to upgrade to win 8. It went well enough, but my screen resolution became very poor. I have AMD Radeon X1250 graphics and can't find a driver that will work on Win 8, so I reverted to Vista. But I really want to run Win 8.
View 9 Replies View RelatedThe other day my son stepped on my laptop and messed up the screen. Now when it starts up I get red lines going across the screen, but can still see the bios info and the windows logo and spinning dots when Windows loads just fine, however when Windows starts I just have a blank screen. Obviously the screen was damaged, but it seems to display the lower resolution okay. I just can't lower the resolution in Windows since I can't see what I'm doing. Plugging in an external monitor doesn't work, there's no output there. Is there way to change the resolution settings if I take it the hdd and plug it into another computer as an external drive? The laptop is an Intel cpu and my other machine is an AMD cpu, so I don't think just trying to boot the laptop hard drive in the desktop would work.
View 2 Replies View RelatedWhen I turned on my Lenovo y410p today I got a blue screen saying:
Recovery
Your PC needs to be repaired
The Booth Configuration Data file is missing some required information.
File: BCD
Error code: 0x000000d
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
The only option I have is: Press Esc for UEFI Firmware Settings
I have 64bit Windows 8. I have a Fat32 external hard drive I might be able to use to recover it - but what should I download? Also, can I try to do something in the UEFI settings to fix it?
I tried downloading various apps from the store, but the message I get was I can't install this app.For example, I tried to install PDF Reader 8, and I get error code 0x80070032. Does the error code reveal what the problem is? I am running Windows 8, not Windows 8.1, on the Lenovo IdeaPad.
View 9 Replies View Related I think this may relate to updating this netbook from Win 8 to 8.1 (but I updated very soon after purchasing so not certain). Basically after several minutes of use, the Touchscreen doesn't respond to touch anymore. I can still use trackpad but no touchscreen.
I have installed latest updates (and drivers from Lenovo site), but still no joy. I've also tried recalibrating touch screen (via Control Panel app) but this hasn't worked (and "reset" option is greyed out).
When I restart my computer on windows 7, there's an option to hit F12 to chose boot options. I got a computer with windows 8, and now that option is gone! How do I get it back?
PC Model: Lenovo G580
By the way, ignore my system specs. That's my desktop, I'm talking about a laptop.
My friend put his Lenovo desktop to sleep, and when he woke it up, it was at one of the initial setup screens that you see when you first turn on a new computer, or first install Windows 8 - the screen that asks you to accept the Express Settings or to customize the setup.
We could not get out of it, and restarting the computer brought it right back there. So I accepted the Express Settings, then it asked me to enter the Microsoft account info, or to create one. He had a local account only, so I kept denying that screen and finally somehow I ended up at a screen that said something like "use my existing account" although it showed no indication that there was any account.
It then said it was installing my Apps (there are no Metro Apps in use on this computer, other than what comes with Win 8). This took about 3 or 4 minutes, then it did some more setup, and when it was done it was (surprisingly) back at his desktop screen, with all his files and desktop icons just like they were before.
the screen on my lenovo ideapad Z500 touch has dimmed and i can't adjust it back. i've tried the all the brightness settings i can find adn even updated the drivers but this hasn't worked,
View 4 Replies View Related