Just got a new Toshiba laptop and plugged it into my Emerson 32" tv/monitor and the top, sides and bottom expand beyond the scope of the screen. I have Windows 8 and have adjusted the screen resolution from the highest to the lowest but it does not make a difference.
View 3 RepliesI'm trying to use an external Samsung TV/monitor (model LN-T2642H) through HDMI. The native resolution of the monitor/TV is 1360X768, which is also the native resolution of ASUS T100.
If I try to use the monitor/TV as the only display, the device selected is Generic PnP Monitor and the native resolution of 1360X768 is not available for selection. Intel HD Graphics Control Panel only shows 1280X720 (selected) and 1920X1080 (too high for my monitor).
Is there a way to set up the 1360X768 resolution with the existing driver (up to date)? Is there another driver that I can download and that will allow this resolution? Can I use a different version of the Generic PnP Monitor that allows 1360X768 resolution?
With the only resolution available i.e., 1280X720 the quality is bad.
I've just updated my laptop OS from windows 7 to 8 (clean installation) and now I can't go full screen on my external monitor, which is connected via HDMI (23' 1920 x 1080).
View 7 Replies View Relatedi need to backup all data i have on laptop as my hard is dying, so the only way i have now is to transfer all data to my old pc desktop but i have a problem as my desktop monitor is broken but my pc is ok with windows 7 so i need to make my TV hisense as monitor but when i connect it using vga no picture appears so how can i install tv on pc without any monitor or change resolution ?
View 5 Replies View RelatedI currently have a 15" PC with a 3200x1800 resolution. Using Windows 8.1. I have the scaling to highest.
My 2nd external monitor is 1920 x 1200.
I am trying to extend my desktop to the 2nd monitor but is there a way to use different scaling for both the PC and monitor?
I have unchecked "use scaling for all my displays" but no matter what, I still can't change the scaling on the external display. It uses the scaling settings of my PC (scaling set to highest because of 3200x1800 resolution) and because of that, the monitor scaling shows everything large.
I have a game (ATCSimulator 2) that is not written for widescreen. The game tells me that in order to work in the mode I want the display must be set to a standard 4:3 setting. It gives the options of 1280x800, 1440x900 or 1680x1050. I tried to do this, but apparently my video card does not support any standard resolutions. I thought it might just show the screen stretched, but the game will not even go into the mode I want to use.
How I can change the resolution to display properly or possibly a workaround for this?
My video adapter is Intel HD Graphics 4000
Intel driver version 10.18.10.3277
15.6" display
Max Resolution 1366x768
Windows 8.1
My laptop is connected to an external monitor by the HDMI cable. The monitor does not have the speakers but has a headphone jack that connects the external PC speakers. The audio, however, is still from the laptop build-in speaker though the video can be seen from the external monitor. I do not know why the audio does not go to the monitor. How to enable the sound from the external monitor instead of the laptop build-in speaks in Windows 8 when the laptop is connected to the monitor by the HDMI? I hope the audio will automatically go to the monitor when it is connected to the laptop but will back to the laptop build-in speakers when the monitor is disconnected.
View 3 Replies View RelatedI have seen some posts on internet, concerning connecting an external CRT Monitor with a Laptop computer. They pretty much said that there might be a blue cable with, and one can use it to connect that monitor with laptop. Now I am confused that mine monitor has two cables; one of which is blue and the other one is white, having three larger pins inside. Both these wires are connected to my desktop CPU. Now my question is that, it is obvious that the blue wire can be connected to my laptop but what about the other one, this wire is connected to the power supply of my desktop pc, and when it comes to laptop, would mere one wire (blue) suffice for the electricity or other things?
View 5 Replies View RelatedMy friend's new Sony laptop has an external monitor connected via HDMI. When he restarts the computer, about half the time the external monitor is not getting a signal, it is blank. He then restarts it until it works. I've only connected remotely to it, and I've been able to get it to go on by playing with the settings in Display properties. Possibly if I was in front of the computer I could try Fn + F5 to see if that works, but he is the kind of guy who does not want to press keys to make it work, he wants it to just work. What might be done to make the second monitor get a signal on a more consistent basis?
View 3 Replies View RelatedI've been getting BSODs a few times a day when I'm not plugged into an external monitor. Sometimes I'll get an artifacted screen or just a random restart. I thought it might be an overheating issue so I took apart my computer and cleaned all the dust out. While it worked for temperatures a little, it didn't solve any of the restarting problems. The max temperature range has been similar (around 64-67~ degrees C under load) but the min and average has been a little better. (47 and low to mid 50s respectively)
The main filenames that have come up in the BSODs have been ntoskrnl.exeintelppm.sys
My problems started on 8, so I did a fresh reinstall of Windows, updated to 8.1 and reinstalled all the newest driversI kept having problems so I uninstalled the newest processor driver from Intel and used the one that HP suggested. If anything the BSODs have been more frequent.I've done the standard diagnostic tests in the HP PC Hardware Diagnostics (UEFI) tool without any errors although twice after my computer has been having rebooting fits it has frozen up before I even got to the tests.I've done Intel's Processor Diagnosis Tool a few times and have passed everything at load level 8. It says my temperature is 35 degrees C below maximum.
Things I haven't done
Memtest for any extended length of timeAnything y'all can come up with
I've attached the output the SF Diagnostic Tool is giving me.
edit:and if it's not a driver issue, I'm hoping it's a memory one. Since the Intel HD 3000 would share system RAM, if the system RAM was faulty that could be a reason why my computer
1) freezes outside of windows on occasion,
2)artifacts w/ a frozen system,
3) BSODs.
I'm not sure why it would change when I plug a monitor in through HDMI though. I don't know if or how the HD3000 would handle an external monitor any differently.
I bought a new laptop without OS, it's a XMG advanced with i7 4700MQ CPU, an Intel HD grafics 4600 chip and an NVIDIA geforce 765M GTX.
I installed win 8.1 and updated all drivers. The laptop itself works fine. Now I wanted to connect an external Monitor ( HP w2207h) The laptop recognizes that there is an external Monitor and that it is an HP w2207h and tries to extend the desktop to it, but the monitor itself says that there is no input signal via the HDMI input and it goes to sleepmode.
When I connect my old Laptop to it, it is no Problem, the monitor shows the extendes Desktop, so the monitor an all cables are OK. (old Laptop : Win7 core 2 duo CPU geforce 9600M GT )
With the new Laptop I have the same problem, when I try to connect it to my LG TV set via HDMI, the Laptop recognizes the TV and tries to extend the desktop ( I can move the mouse out of the internal display to the TV ) but the TV says there is no input signal.
I have set the Output to 60 Hz and different resolutions and tried to duplicate the display or only use the external one. Nothing worked.
I can't force the Laptop to use the Gforce, he decides which one he wants to use.
A friend bought the same laptop and made the same installation, but when he connects to his external moniotr everything is fine, but I don't know what kind of monitor he has and I have not connected my laptop to his monitor.
I sometimes plug in my LCD TV via HDMI cable to my laptop. I use it as a second monitor. The sound used to go to the TV as well. However, I inadvertently deleted the sound "profile" for the external monitor and I can't get it back. (I've attached a screen shot showing where the other profiles are, but missing the external monitor one).
How do I restore it so that when I plug in the HDMI cable the sound will go to the external monitor?
Each time I start the computer is is necessary for me to adjust the screen resolution to cause the screen tiles to appear when clicking "start" on the right side of the screen. What am I not doing? When I open the computer the next time I adjust the screen resolution back to a different setting and the tiles come up.
Also (I'm obviously a newcomer to W. 8), I get a dialogue box each time which refers to to: "RUNDll". Something about an issue with opening something???? I click "OK" and it goes away. Appears every time I start up.
How do I get "Screen Resolution" (on desktop, right click and select Screen Resolution) to show my main monitor as "1"?
View 5 Replies View RelatedI have a gateway NE56R41u. With that aside, today i played the sims 3 when it has a warning about my graphics card or whatever, so i went to my screen resolution to see if i can fix the problem. Unfortunately, the place where i can choose what my resolution is greyed out, so i cannot change a thing. Heres a picture .....
View 3 Replies View Relatedi am trying to enable snap on my 19" 1280x1024 screen but i cant find a way how to do achieve that
View 4 Replies View RelatedI have a msi u270 with an amd e-450 but the res is only 1024*600. I saw about the changing of the value for an index file called "Display1_DownScalingSupported" but i cannot seem to find it. I tried installing drivers and then tried but could not find it then i tried again with the latest beta drivers from the amd website but i cannot find that.
View 2 Replies View RelatedI just changed my laptop's OS to Windows 8 but somehow, I can't change my screen resolution the way it was before.
Here's a screenshot: [URL] .....
And when i go to desktop, right-click then screen resolution, there's only 1 option available.
Here's how it looks like: [URL] .....
And as you can see, the "Resolution" option won't show any other options aside from 1024x768.
I just installed Windows 8, and each time I boot up my resolution reverts to 800x600 even though my native is 1680x1050. I have to constantly change it after login. I hope this is a simple fix, this is the first time I'm using Windows 8 as my normal OS.
View 9 Replies View Relatedi have lenovo z580 laptop with windows8. Initially when i purchased it, i remember that it had resolution of 1920*1080 working. But since a week i notice that the screen resolution has down graded to 1366*768 and am unable to set it back to 1920*1080, as the screen resolution slider does not show up that option at all.
View 4 Replies View RelatedMy netbook(Samsung NC110 with 1024*600 Screen Resolution and Intel GMA 3150) is running Windows 8.1 x64 now. I want to use all features of Windows 8, so i want to set Custom resoltion like 1366*768. I was trying to change some keys in the regedit, but the picture was very bad, cause my screen is 16:9, and 1024*768 or 1152*864 resolutions is 4:3. I want to get some utility to set Custom Resolutions, that bigger that real resolution of my display.
View 4 Replies View RelatedI'm using win 8.1 with a 2560 x1440 resolution, but I can't seem to get split screen to work. I've tried a few tutorials online, but without success.
I can easily split the screen by left mouse clicking the top of the screen and dragging down. The first window works normally with task bar showing on the bottom, but I can't figure out how to get anything else in the 2nd window that is created. One online tutorial mentioned something about executing a mouse-over on the left or upper left corner, but that doesn't bring anything up. I can get the search/share/start/devices/settings task bar to appear by mouse-overing the upper right hand corner, but this doesn't lead to filling the second window.
Windows 8 is literally taking 2 minutes to Boot!
I am also having an issue with not being able to change the screen resolution. I tried updating drivers. Resolution is set to 1024 x 768. There are no other choices.
Computer information is as follows:
Windows 8 Professional with Media Center (build 9200)
Hewlett-Packard Presario V2000 (ET931UA#ABA) Rev 1
1.80 gigahertz AMD Mobile Sempron
1920 Megabytes Usable Installed Memory
BIOS: Hewlett-Packard F.52 01/20/2007
I'm using my laptop MSI GE60-2OE. When I first boot into the system, everything looks fine
But after using for a while, the display becomes odd. Every item becomes bigger than normal and the entire screen seems bigger than the screen size
Even worse, in the desktop mode, the taskbar change to strange state and the menu start is disabled
This problem happens when I set the screen resolution at 1920*1080. Things change back to normal when I reduce the resolution to 1600*900.
My new Acer laptop has very disappointing screen and video quality. The screen resolution is maxed-out at 1366 x 768 with Intel HD Graphics 4000. Those specs should be just fine for great visuals. My old desktop didn't come close to that but I could watch Youtube videos very well with no pixeling of image. Acer tech support said "new graphics driver download" and I did that , to no avail. Setting adjustments etc.? My wife's 3 year old Acer has better screen quality than my new one.
View 9 Replies View RelatedI'm running Vista 64 and tried to upgrade to win 8. It went well enough, but my screen resolution became very poor. I have AMD Radeon X1250 graphics and can't find a driver that will work on Win 8, so I reverted to Vista. But I really want to run Win 8.
View 9 Replies View RelatedThe other day my son stepped on my laptop and messed up the screen. Now when it starts up I get red lines going across the screen, but can still see the bios info and the windows logo and spinning dots when Windows loads just fine, however when Windows starts I just have a blank screen. Obviously the screen was damaged, but it seems to display the lower resolution okay. I just can't lower the resolution in Windows since I can't see what I'm doing. Plugging in an external monitor doesn't work, there's no output there. Is there way to change the resolution settings if I take it the hdd and plug it into another computer as an external drive? The laptop is an Intel cpu and my other machine is an AMD cpu, so I don't think just trying to boot the laptop hard drive in the desktop would work.
View 2 Replies View RelatedSo I have Acer Aspire E1-570G that has 1366x768 max resolution, but is there any way to put it's resolution to 1920x1080? After using my friend's laptop (Acer Aspire V) that has 1920x1080 resolution.
View 9 Replies View RelatedI have a three monitor setup, and I prefer to have my start screen on the secondary monitor.
In Windows 8.0, win + page up or page down would move the start screen, but in 8.1, they have removed this keyboard shortcut.
How to move the start screen?
I have two monitors. The desktop is always showing on the second monitor. If I have the start screen on the main monitor and click on the desktop on the second monitor, the main monitor switches to desktop. Is there anyway to keep the start screen on the main monitor in this situation?
View 9 Replies View RelatedI'm running Win 8 with two monitors, and am having the issue where the Start Screen will disappear once I click anywhere on my desktop on the other monitor. my eyes completely removes the purpose of running Windows 8 on a multi-monitor setup.
Basically I want the Start Screen to always be up on my second screen, and always have the classic desktop up on the primary screen.