Computer Will Not Boot To SSD / Forcing To Use Windows Boot Manager
May 29, 2014
I had an issue with my Windows 8 where I was forced to reinstall it. I have completely wiped my SSD and reinstalled Windows 8 on it. However, now it will not let me pick my boot order. It is forcing me to use Windows Boot Manager as my Boot Option 1. If I use anything else, I just get a black screen with a blinking line cursor.
It didn't use to do this before I had to reinstall. I'm not sure how to fix this. It also will not let me choose F11 boot options, it always is forcing me to use Windows Boot Manager.
How do I make it so I can boot from whichever boot order I want, instead of using Boot Manager?
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
My Dell Inspiron 660 is 2 months old. It came with Windows 8 preinstalled. My problem: I am trying to change the boot order so I can boot from CD ROM as a first option. I have tried using the "F" keys on boot, but it just ignores me and goes on to boot up. I have also tried the "Advanced Options > UEFI Firmware Settings" in "Change PC Settings" and got the same results. I spent some time on the phone with a Dell tech. After trying all the things I had already tried, he and his supervisor decided I must have a bad Motherboard. Does this sound right? Is there any way to repair this problem?
This is the 5th time I've had the charms not showing up forcing me to shut down then computer by using the button in the front of the thing. what do I do to fix this so if the same thing happens again, the charms do come up.
I have an error message at boot time that says [fail] twice then boots normally.
I have tracked it down in other posts to the bios which I change and it works for awhile but then mysteriously changes itself back.
Here is what I do. F2 at Dell logo move tab to "boot" Reorder the boot order to the following: Windows Boot Manager UEFI Onboard LAN IPv4 UEFI Onboard LAN IPv6
then save and exit machine reboots without error message Runs/boots fine for awhile then message reappears. Going back into BIOS shows Windows Boot Manager has moved to the bottom of the list again.
My problem is that when i try to boot to F11 Recovery Manager i get the "error 0xc0000225" message.
Here is how my partitions look -As you can see i have the Recovery partition there, it is actually 17.5GB in actual size. Here is a what the Recovery (D) folder looks like -In the "HP Recovery Manager" it also says on the left "Disabled: Recovery partition is removed" but on the right side it actually allows me to remove it, which doesn't make sense, this image will show you what i mean -
I actually do have the Recovery Media on a USB in which i created from this very drive, i can boot the PC from the USB which then gives me options to factory restore etc.
The whole point is that i want this to work without reverting back to the recovery USB, is there any way at all to repair this?
I have looked around a bit and all solutions to this problem require me to get into the startup screen when booting from the installation disk upon startup. The problem is I cannot get to that screen!!
I am a uni student and can download windows 8 OS for free at msdnaa, I have done that and made an image file on a dvd and usb stick. I then put both of those into my dell N5010 (which is running win 7 now) and try to access them upon startup, (I go into the boot menu and try booting from booth DVD and USB) and both times I just get the error "boot manager is missing press ctr, alt, del to restart) so I cannot even get into the installation screen to do the repair that is says I need to do on all the other solutions I have seen.
Yesterday, after many, many problems with my computer, I finally decided to reinstall Windows 8.1 Pro onto my ASUS X200CA netbook. However, after backing up and reinstalling the OS, I found that when I tried to disable "Launch CSM" in my BIOS, all of my boot options would disappear and my laptop would continually boot into my BIOS. When I re-enabled "Launch CSM", the boot options would reappear - however, it had not included the "Option #1 - Windows Boot Manager" that I had seen in my other installation.
I have a Lenovo laptop that came with Windows 8 pre-installed. I decided I want to dual boot with XUbuntu.
I shrank my partition and left space for the linux distro. I installed xubuntu into the free space, and even set the bootloader installation to be in that partition as well.
Then after installation, I only get the GRUB bootloader. How to get Windows 8 back and I finally be able to boot into either OS.
However, I have lost the blue UEFI boot manager that Windows 8 should display.
So I get EasyBCD on Windows, try lots of options to regain an original boot manager. But instead of the typical blue UEFI screen, it created a black screen with my boot options (and the linux option doesn't boot from there).
So to summarise, my boot sequence is like this: -Switch on laptop -See GRUB, with default pointing to Windows. I am able to boot to linux from here. -Click Windows and then see Windows Boot Manager (black) with Windows and Linux -Click Windows and it boots. Click linux and get an error.
I have secure boot enabled, and I installed xubuntu in secure boot mode.
Went to turn on my computer today and got a screen with the Dell Logo and a message "Boot manager has recovered from a critical error." It went on to say there were missing or corrupt files that were restored from the default configuration. I did a Google search and found absolutely nothing about this error. This laptop is only 2 months old. I couldn't find anything in the event viewer either.
suddenly appeared when I start Windows 8. It shows Win 8 and Windows recovery console as the two option.
I checked msconfig and easybcd for the second option to remove but only Windows 8 shows. I tried erasing the mbr with mbrwizard, repartitioning and formatting the hard drive, fixmbr and fixboot. When trying to refresh Win 8 it says C drive is locked. I scanned for rootkits with several products and they found nothing. how o get it to boot straight to desktop?
I installed Windows 8 and cannot boot my computer. I can hear the hard drive whirring but then it stops completely and black screen... Before that the power brick stopped working and the motherboard was fried.
I am currently attempting to dualboot 7 onto my 8 computer. I made my partition got everything ready, and realized... i have way tomany partitions? What do i dackup what do i keep? ...
Currently i have Windows 8 / (blank)win7 / lenovo app / recovery. And 5 other ones!? Are they important? Do i need them? How do i find out?
Recently I was trying to upgrade my Windows 8 Pro computer to Windows 8.1 Pro. But I had no working USB sticks so I thought I could make a NTFS partition into my hard drive and extract the Windows 8.1 Pro installation setup files on there. So when I restarted my computer, it booted up into the Windows 8.1 Pro installing setup but said that I needed to boot up into Windows and put the installation media back in. But I could not and just kept booting into the installation.
So I thought that if I delete the partition I could go back to Windows. So I did with DISK PART. Now when I restarted it, it now gives me "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I'm guessing that when I deleted that partition, there is unallocated space left and my computer is trying to read off that but not the Windows partition.
I'll start my computer, it will post and go into the BIOS just fine, it will always get past the screen right after the bios (with the motherboard logo and the windows spinning dots) and then it will go to a blank screen of blackness. It's had this problem off and on for a while, and I put in a new power supply about 2 weeks ago and it fixed the problem but now it will only boot into safe mode.
It has no problems in safe mode and I have not seen it BSOD once.
This has been happening for a couple of months now, and it used to be sporadic on the old power supply, but then it always happened, and now it seems to be happening all of the time now as well. Oddly, if I were to disconnect the ethernet cable it seemed to boot up better on the old power supply, but it doesn't matter what I disconnect now, it doesn't seem to want to boot up past the spinning logo thing before you actually get into any kind of windows 8.
Computer: HP Pavilion DM4 3070-se (Beats Edition) OS: Windows 8
It would not boot up, and when I started it the BIOS showed a '3F0 hard drive not exist' error. I left it until this morning, and tried again. Everything booted up and it reached the Windows 8 login screen -- I have automatic login enabled, but the screen freezes (spinner indicator stops suddenly) and the screen goes black. It restarts again, and sometimes I get the Windows 8 repair screen, sometimes I get the 3F0 error again.
The inconsistency makes me think that something is screwed up hardware-wise, but I'm not totally sure. Apparently, from reading online, the problem could be the HDD (I don't think this is the case) or a poor cable connection (most likely), or a software problem.
Because I don't have recovery media for Windows 8 (I installed it on a USB drive I don't have with me) I can't try a system refresh or restore, but I'd rather avoid those if at all possible.
Do you all think that a good option might be to take it to a hardware repair place and have them check the cables for errors?
If I remove the boot drive from my old Windows 7 computer and put it into my new Windows 8 computer, how can I set up the new computer to allow dual boot at start-up?
My computer has been working fine without issue until late last night.
I turned it on and went to get a drink and noticed that the computer had shut off.
Surprised, I returned to turn it back on and then I saw the motherboard logo and immediately a blue screen that said, "Recovery, Your Computer Needs to be Repaired." and along with that, an error code of: 0xc000000e.
The issue I see is that once I go into the UEFI (BIOS), under Boot Priority, it always said "Windows Boot Manager" since I'm using an SSD where Win 8.1 Pro x64 is installed and created a GPT instead of an MBR. Now, I am seeing "Microsoft Windows" instead of "Windows Boot Manager" and I cannot find it anywhere!
I used DiskPart after inserting the installation DVD in Command Prompt and checked to see that all three partitions are there - 111GB (120GB SSD), 300MB called Recovery, and an unlabeled 100MB partition. All three partitions are there.
I tried to use:
bootrec /fixboot bootrec /rebuildbcd
I tried going through this guide: How To Rebuild the BCD in Windows
However, when I "rebuildbcd", I get only the following (in BOLD):
Scanning all disks for Windows installations.
Please wait, since this may take a while...
[Successfully scanned Windows installations.Total identified Windows installations: The operation completed successfully.]
It doesn't say whether it was successful or not and the source drive keeps showing up.
What I mean is:
C:ootrec /rebuildbcd
Scanning all disks for Windows installations.
Please wait, since this may take a while...
C:
I'm not sure why it doesn't give me a success/fail message. I tried it several times to no avail. I am therefore unable to proceed with that guide in that link above.
When I reboot and go into the UEFI, it still shows "Microsoft Windows" and I can't get "Windows Boot Manager".I ran CHKDSK /R and after that the UEFI did show "Windows Boot Manager" but when I rebooted, I got the same "Recovery" blue screen with the same error code (0xc000000e) - and Microsoft Windows was showing up under Boot Priority #1 instead of "Windows Boot Manager." The system was working perfectly until last night and I need to have my computer running properly.
I build computers for people. And after I install Windows 8.1 I want to install the drivers and set it to run first time boot again so my customers can customize it. I could do it on XP.
I have an older computer that was not used for over a year.I recently hooked it up to use it.When i did i had no picture and continuous beeping from PC. I tried dusting out inside of PC,cleaning and reseating the RAM and made sure all connection were tight and on.
Still the computer when turned on has no pic and beeps continuosly not in any pattern to tell you errors from the BIOS.
Some say could be video card,it was hooked to the integrated video card,but i also installed one in PCI slot and it does the same thing it beeps and no pic. Also some say could be the battery or another hardware failure.
I am thinking of trying to sell it if i can get it working again it was working a year ago till i set it away because buying a new PC.
This is the model this site was no Gateway Support - 1009566*Gateway GM5472 Desktop Computer
I'm working on a gal's computer (HP 2000 laptop). Her problem? When she hit the power button, the computer would not boot. No BIOS screen, no boot screen, no HP screen. Nothing. Just a blank, black, backlit screen with no activity on the HDD indicator LED. If I remove the hard drive, however, then the computer will boot to the point of giving me a message instructing me to install a hard drive.
So you'd imagine the issue is with the hard drive. I hook her HDD into a free slot on my desktop to check the device. I'm able to access all files and it checks out okay. But if I put it into her computer, all you get upon touching the power button is a blank, black, backlit screen.
I'm assuming at this point that the boot partition on her HDD may be corrupted and a reformat and clean install are needed. I was able to back up her personal folders. However, there is no COA sticker on her computer (thus no Windows Key), just a "Windows 8" sticker. She said her computer did not come with a set of discs either (HP puts recovery data on a second HDD partition, which I am unable to access at this time). I asked her to contact HP and request a set of recovery discs for her computer, so that is where the process is at right now: waiting for a reply from HP.
I just upgraded my desktop to Windows 8 from Windows 7 using digital download. Everything was running smoothly as I was installing apps and drivers. My graphics driver required a reset after installing, and now when I try to boot up my computer, after the bios and initial windows logo happen, the screen goes dark and the computer stalls. After a while it'll give me 4 beeps. I tried the automatic repair, which seems to be the only thing I can do since I can't boot to the start menu, but the result is the same. I used digital so I have no media to boot from, is there anything I can do to fix this?
I was using my son's laptop (hp 255) as mine is in for repair and thought I would install windows 8.1 onto his system as a free upgrade (bought in march this year running windows 8) Unfortunately the power failed whilst the update was installing and now I can't boot up the computer and he did not create a system repair disk I have looked at safe mode (turn on and press esc) and that will bring me to various options - I have tried restore and it appears there are no restore dates available..
I have a custom built computer running Windows 8.1 64-bit. Recently, it stopped going to sleep on it's own (except the first time that the power plan is followed after boot). Otherwise, the monitor goes to sleep and that is it. After a bunch of other attempts and fixes, I have found that there is a driver that is blatantly disregarding powercfg settings (as seen here: [URL] .....). This has been going on for over a week. I have run sfc /scannow, and dism /online /cleanup-image /restorehealth with no luck.
My Dell XPS8700 is like a 16 year old, friendly one minute and totally nuts the next for no reason at all! The computer DOES boot, but there's no beep and well...
I just got a refurbished ASUS K75DE laptop, and it came with Windows 8 on it. I am wanting to run a dual boot with Win7, so I disabled fast-boot just fine, and went into the UEFI BIOS and disabled the secure boot.
While I was there, I did like I have always done and set a BIOS boot-up password. I then proceed to boot to my Win7 installer USB Flash drive, but I was running low on battery power so I aborted the install and shut the computer down to try again later.
Now however when I get into BIOS to select boot priority, all options are grayed out except for system time and a few other non-essentials. At the bottom of the first BIOS screen it says "User Level : User" and I can't seem to find a way to reverse this issue. So now I'm stuck, can't boot to anything but the HDD because it is first by default.
