I have a problem with System Volume Information in my Drive D: (239GB), enlarged from 5GB to 60GB (Check from My Defrag). and the free space down from 113 GB to 51 GB. I don't know how it works, it happen when my System is under Automatic Maintenance (in Windows 8). I want to save my disk space. I have check my disk using CHKDSK. i found error, and fix that. I check again, and found no Problems.
I have been noticing recently, my C drive gets occupied fully even if there are no bigger programs installed.
Out of 150gb, after uninstalling few programs, the space left was 30gb. Day by day it started decreasing and i saw 20gb today.
I used the disk cleanup tool and it shows only 100mb after selecting all fields.
I was worried still that space was not freeing and ran this program WinDirStat. Here are the screenshots.
System Volume information folder occupies 75% of space - meaning 100gb.
There are lot of files which were around 1gb - 2gb and they are created from 2013.
why 100 gb? I read that this service is important but why is it taking this much of space.. remove these unwanted older files if any.
I tried below options after googling and also searching in this forum:
Used disk clean up tool and selected more options > system restore and shadow copies > deleteDisabling and Enabling System restoreDeleting shadow copies through VSSAdmin Delete Shadows commandVirus scan in System Volume Information folder (after taking ownership of that folder) through Kaspersky and ESET SSManual delete of the files.Selecting delete option in System Protection > ConfigureChanging maximum usage to some x%
I have tried all these methods but still those files are existing.
I am having problems with system imaging my Windows 8 machine to an external hardrive via a usb (??) cable.
First, as mentioned in another thread is the exceptionally long time. The external drive is a WD 1TB BTW. I have two older hardrives on the computer. Just installed the second, which at this time is not being used. Trying several several programs, Paragon Free, Easeus, Macrium Reflect and the built in Windows Backup I was getting 14 hour estimates.
The actual issue I wish to resolve is that during a over 9 hour backup of the primary drive with approx. 34GBs, I noted what appears to be a folder with the Windows backup icon called the name of my computer on my external drive. It contains approximately 3GBs of data in multiple folders. Windows backup is turned off. I did not have this file on the external hardrive and I didn't initiate the OS to perform this. It showed no indication of running and occurred during the Macrium backup.
Recently i upgraded my system to windows 8..N after clean install i backed up the copy of my C drive (Includes System Image) to my external 2TB Hard Drive.. It took around 250GB of hard drive space..Now since i am running out of space i decided to delete the back up copy from My hard drive.. I deleted WindowsImageBackup and all associated files using control panel..But around 150GB space is missing(not visible) from my external Hard Drive..
As You can see from attached pic that 125 GB free out of 1.81TB..But size of all files including hidden files is 1.53TB..
I created some windows 8 system images(Using the internal system image tool). Now I find restore points more useful, but I would have to turn the system protection on for an external hard drive. The problem is that I don't understand the sophisticated message Using system protection on a drive that contains system image backups will cause other shadow copies to be deleted faster than normal. Does it mean, that under some circumstances my manually created full system images could be deleted to create a restore point? I would like to keep the system images. Also, I hope it doesn't override existing directories on this harddrive, but I don't want to try it out without being sure.
Win 8.1 ProThe system allows system image backup done on either external hard drive ( which I do every week ), or on DVDs. Why it does not allow USB flash drive ? I tried to use a 32 GB flash and it refuses to do backup on it.
I just installed Windows 8.1 on my system (from Windows 8) and had to restore to an earlier time (to one from earlier today). The issue is that my solid state hard drive was reduced by about 20 Gigs! I even deleted the other restore points and rebooted, but my hard drive has about 136 gigs of space. Before the restore, it was 156.
Does windows restore really eat up this much hard drive space? Is there a way to get it back?
I had a windows 7 laptop which finally died but before it did a made a system image backup to my external hard drive so I have all the files. How do I load that onto my new windows 8.1 laptop so I have all my files there?
How to clean up the windows containing hard drive from everything but the system files, because I upgraded my windows and not installed it to a clean hard drive. I have a lot of unneeded files. How to do it, without reinstalling windows.
My computer had 4GB of RAM and an Intel G2030 processor. It worked fine for my needs, but I'm a compulsive tinkerer. I have upgraded to 12GB of RAM (supposed to be 16, but one module of the 16GB kit I purchased was DOA) and to an Intel i5-3550S processor. These were done in two separate installs, and the computer seems to be running fine, as far as I can tell.
My problem is that the System Information screen doesn't seem to be updated with the new processor. It shows the RAM (11.9GB), but still shows the 2-core G2030 processor. When I go to the BIOS, however, it shows the i5-3550S. Is there something I need to do to get this to update? I'd like to be sure that the computer recognizes the new processor...
I got this msg tryng to refresh my pc . because my vaio gate app wasnt working right . so after the restar i just got the blue screen with this error the boot configutating data file dosent have valid infomation of an operating system.
Before installing my new Sound Blaster ZxR I had to temporarily use the Onboard Sound of my Asus Rampage IV Black Edition because of a SLI Water cooling component blocking the necessary PCI Port of the former Sound Card ( a Sound Blaster Recon3D Fatal1ty Professional ).
Because of the cracking ( grounding loop? ) I receive during the startup when using 3.5mm jacks ( or 1/4" with the ZxR ) I stopped using them whenever possible and instead started using the Toslink connection on both the Recon3D AND the RIVBE as it electrically disconnects the PC from the Sound System.
Now here comes the Problem: Using the new Sound Blaster ZxR and having it connected via Toslink to my Sound System I'm not able to control the Volume using.. Multimedia Keys on my KeyboardVolume Mixer from the TaskbarEven Muting isn't possible
The only way to change the Volume level from now on has been by doing one of the following four.. Change the Volume level by Hand in the corresponding App itself, not the overall System Volume - Kind of sucksUsing the Hardware Dial on my Speaker System - Hard to reachSwitch from Toslink to Jacked Cables - Startup cracking Also
Switching the default Playback Device from Speakers to Digital Audio (S/PDIF) - Will cause me to loose the ability to run Encoders like Dolby Digital Live or DTS Connect and it's DTS Neo:PC Music Mode feature which, in my opinion, really improves my listening experience as it then uses all my Satellites, not just the front ones.
I'm not sure how my settings were while still using the Recon3D that allowed me to go Toslink while still being able to change the System Volume simply by using the Multimedia Keys of the Keyboard.
I have Windows 8.1 x64, I have a 1TB drive attached on USB 3.0 port, the disk has four partitions, two are not allocated, I am trying to extend the volume on one of the active partitions, a Healthy, Primary partition but I get a message "The operation you selected will turn the selected disk(s) to Dynamic disk(s).
I'm not sure what it means but how do I get the extended volume to be a Basic volume?
I'm using a Logitech 35 headset on Windows 8.1 64-bit and all drivers are updated but when i want to adjust the volume, the volume mixer becomes unresponsive and stops working and my headset stops receiving sounds.
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
I have a 2TB Western Digital My Book Essentials, it's filled with tons of old photos, movies, docs, games, and I'm scared to think of what else. The SATA to USB connector broke on it, so I took the drive apart and put it inside my computer. I opened up device manager because it wasn't showing up automatically and the 2TB is showing up as unallocated, I'm freaking out now because I'm scared the data was somehow deleted.What do I do?
edit: I realize also this isn't directly related to Windows 8 (besides the fact it's the OS I'm on), but I don't know where else to post it. I'd also like to say that I had a really deep feeling the drive was going to break continually for about two weeks before it happened, so if you have a similar feeling about something, don't ignore it!
I know there is good software out there to clone/image my hard drive and restore it to a new SSD drive. I'm just wondering though, since my laptop is brand new, I made a full recovery to a USB drive and included the OEM recovery partition.
Couldn't I just swap out the old HDD with the new SSD and boot with the recovery stick and do a full recovery back to the new SSD?
Also, however I do this, recover or image backup/restore, do I need to do some type of SSD alignment? I can't find a clear answer on that.
when plugging in my seagate freeagent hard drive i get the message "USB device not recognized. I have been to device manager and it appears as "unknown USB device (device descriptor request failed)". I have tried uninstalling it and reinstalling, checked for new drivers/updates.
I am new to Windows 8, and first time with a laptop. I have 1tb hard drive (minus a few gb) in c drive. d drive is being used as recovery
This is how it was setup. What I would like to do is to partition the amount of space i have from c drive into another drive.
Can manage to partition some hard drive space over to another driver letter, if i do a fresh install of windows, will this new drive be formatted too?
(Just asking this because when I owned a desktop computer, I had two drives. A c-drive and a d-drive. When I re-installed windows 7 on the desktop, all my files were still available on the d-drive, hence asking the above last question).
I have a windows 8 laptop and wanted to re install a whole new windows 8 on it. I'm going to use the generic product key than once installed use the one that i found with magic belly bean key finder. I am just worried that it might say something went wrong than have to buy windows 8 so could i partition the hard drive and than once i know the new windows 8 is good than delete the other?
A few months ago my laptop broke and it needed repairs. The HDD was replaced and i got my laptop back with one new HDD inside and one "broke" HDD in a bag. Later the "Repaired" Laptop crashed again so i bought a new one and took the HDD out of the old laptop. I bought a HDD case with USB connection and both of the HDD's where intact. The oldest HDD contained windows 7 and the replaced contained windows 8. Now i want to sell the Windows 8 HDD so i want it to be clean of personal files but i want it to keep windows 8. I thought the solution was to run the windows 8 on the HDD so i can use the program deletation program of that windows 8. The problem is i dont know how to run windows 8 of a hard drive. I have searched the internet but with no success.
I have two USB 3.0 ports on the front of my Dell XPS 8500 Dell desktop. Once again I have caused the USB 3.0 eXtensible Host Controller to stop working because I did not disconnect the external hard drive before shutting down, it seems. It reminds me of leaving in a floppy drive but at least the computer would not boot in that circumstance. Now, there is no warning whatsoever. Dell technical support's answer is to refresh or reset the machine.
Any way that would be less time-consuming than having to reinstall all of my applications.
I have an external hard drive connected to my PC via hard drive dock on USB 3.0 port. Whenever I turn my PC on with the hard drive connected, my PC won't boot up because it is trying to boot up from the external hd where I have an image of both my Win 7 & Win 8 OS. How can I stop my PC from booting up from the external hd?