BCD Error Boot File Missing Required Information
Mar 12, 2014
I've got a windows 8 laptop which gives me this error message when i try to switch it on:
"Your PC needs to be repaired The boot configuration data file is missing some required information.
File:BCD Error Code : 0xc000000d ............................" I'm sure you are all familiar with the rest of this dreaded error code.
I've tried all the repair options, recovery disks to a windows 8 bootable flash disk, the command prompt fix boot commands as well but still I get the same error message whenever i try to boot windows.
Now I'd like to know, can't i just copy the boot folders from another similar windows 8 pc and paste them into my harddrive to fix this?
View 8 Replies
ADVERTISEMENT
Dec 27, 2013
I have windows 8.1 and Lenovo y510. After upgrading from 8.0 to 8.1 a have several problems with my PC. Right now suddenly I cant start my PC.
I have BSOD
Recovery
Your PC needs to be repaired.
The boot configuration data file is missing some required information.
FileBSD
Error Code:0x0000034
Need to use recovery tools on your instalation media. If you dont have any contact your system administrator or PC manufacturer.
ESC for UEFI firmware setting.
I try different setting in setting utility (after pressing ESC) and nothing changed.
I dont have any USB or Disc with windows. (but i do have legal copy - it was already installed in my PC) so i cant restore pc from installation media.
View 2 Replies
View Related
Feb 27, 2013
I am having a problem with a new Dell Inspiron 15 3520 that came with Windows 8 installed and that I had been using for only a month when it went bad.
The problems started when I turned it off about ten days ago, and went I turned it back on a couple days later, and it was stuck in the apparently famous Windows 8 "Automatic repair couldn't repair your pc"/BSOD loop. I was not able to boot into safe mode. System restores made no difference. Somewhere along the line I found something that said that I had an "inaccessible_boot_device error".
From the repair menu maze, I was able to get to a command prompt. I used this to copy almost all of my files off of computer.
Chkdsk showed no bad sectors, no bad partition records, or other irregularities. sfc returned "Windows Resource Protection did not find any integrity violations". Some test (I do not remember which) showed that the boot record and BCD were fine. The Dell hardware diagnostic test showed everything working fine.
I am thinking that it is possible that the source of this was a virus or mechanical problem (I saw no evidence for either). If I had to guess, however, I would imagine that the computer stopped working after an automatic update pushed a corrupted/incompatible driver. I have seen discussions online about people having problems with NVIDIA video and/or SATA AHCI Controller drivers, and Windows 8 getting corrupted and stuck in the BSOD loop from that. At some point I saw a Windows Update Log (I am not sure where), that showed that, as Windows shut down the last time it was functional, automatic updates installed a new AHCI driver.
I tried downloading some new drivers for the 3520 from the Dell web site and installing them on the dead computer through a thumb drive and the command prompt. The downloads are all executables, however, and when I tried to run them, I get the message, "the subsystem needed to support the image type is not present". I believe that this message means that the driver executables are 32bit apps and won't run from a 64 bit command prompt. I also tried to use the "Drivers and Utilities" disk that came with my PC to do some driver rollbacks, but, I can't understand the file names or folder structure on the disk, and, when I try some to run some of the exe files ("setup.exe", for example) to get a gui interface, I get the "the subsystem needed to support the image type is not present" message.
After working on the problem for a while, I borrowed a friend's Windows 8 installation disk set. The computer will boot to the repair options off of the 64bit disk, but not the 32bit one. I did attempt a System Refresh off of the 64bit disk, and got back the message, "The drive where Windows in installed is locked. Unlock the drive and try again."
Around the time that I was messing with the BIOS settings to get the computer to boot off of the Windows 8 disk, I started getting a message "Your PC needs to be repaired - Boot Configuration Data file is missing some required information -- File:BCD -- error code 0xc0000034" at the start of my boot ups. I am not sure if I deleted a file somewhere during my repair efforts, or if I am getting this message because the computer is confused in efforts trying to boot off of the DVD. I get this message even with the DVD removed and the BIOS set to boot off of the Windows Boot Manager, however, so I am guessing that a file is now missing. And the message stops me from getting into the repair menus/command prompt any other way except through the installation disk.
View 2 Replies
View Related
Mar 15, 2013
I got this msg tryng to refresh my pc . because my vaio gate app wasnt working right . so after the restar i just got the blue screen with this error the boot configutating data file dosent have valid infomation of an operating system.
Error code 0xc000098 /BCD
View 1 Replies
View Related
Sep 15, 2014
Earlier, about an hour ago, I left to go job searching, and left my computer in hibernate mode so I could bring it back up as soon as I got back. When I tapped keys on the keyboard, the computer powered up as usual, but it brought up the BSoD, stating it was missing files.
Prior to receiving this error, everything was working fine. I even set it to hibernate mode during the night, and it powered on this morning without any problems. I dunno if it's the multimedia keyboard I'm using or what that caused it.
I don't have an installation disc (since I bought it from Fry's Electronics about a year ago with 8 pre-installed), and neither do I have a recovery disc (since I didn't know how to make one.
Computer info: Windows 8 x64
Manufacturer: ASUS
how to fix the missing boot files, and how to do it without causing any data loss from either of my hard drives.
View 7 Replies
View Related
Sep 15, 2013
I recently used IOBit uninstaller to remove all traces of a program from the registry. I'm assuming it removed something that caused this issue, because after I used it all my program information in Add/Remove programs was missing. However, other users on my PC show all information in Add/Remove programs. Is there a way to repopulate this or would I have to create a new user?
View 5 Replies
View Related
Jan 31, 2014
My brother brought his PC to me with the above error.
The rest of it is File: BCD and error code 0xc0000034. And of course being my brother he did not make a recovery CD. There is also no windows twenty five digit serial number sticker on the case.
View 9 Replies
View Related
May 26, 2014
I have tried to start up my PC recently and I get the message that my boot system has failed due to the fact it's missing the file "BCD".
I have contacted the microsoft company to report this issue, no support without my product code, or a disc/USB with the windows 8 system on it.
I have none of these and yet my issue still remains. My PC has worked perfectly the day before I shut it down. I'm trying very hard to restore my system but all I can find of the ways to restore it is by clicking control panel, etc...
I cannot access my laptop's desktop all I get is this error message and options to enter the setup utilities, firmware and boot options.
In all I'm asking for is, is there a way to restore my system from any of these options or is this another toss away laptop because windows 8 has failed to find this missing file?
I cannot get a replacement because I do not have the key with me that was used to install the operating system. This is all very frustrating and not to mention my job relies on this computer so it's putting everything to risk with my situation right now.
View 9 Replies
View Related
Mar 17, 2014
I have an i7 ASUS Ultrabook (HDD is 2xssd in raid0, UEFI, GPT partitions.) which is great but have an issue where wifi profiles don't retain and i'm not too concerned about retaining the data on the ultrabook so after attempting to fix the wifi profiles not saving (Have been through the driver scenario, folder permissions, sfc, etc and no joy) i'm just going to do a clean install from the recovery partition.
I started by trying the recovery methods 8 has built in, refresh the files, but fails without an error and makes no changes. Attempted to do a full restore via 8 recovery also but fails with no error also and then I realized I was actually missing the OEM options (F9 during boot doesn't allow for EMS boot to begin recovery from recovery partition like expected, just boots into normal recovery).
After installing windows 8.1 it no longer allows me to do an OEM recovery via Windows 8.1's built in recovery methods so I created a recovery USB from the recovery partition using the windows 8 tool since the AI Recovery Burner doesn't recognize the partition, the USB recovery creation did recognize the partition and allow me to create the USB recovery drive from this successfully.
When running the USB recovery, the recovery fails with "Required drive partition is missing"
I think this is because the recovery partition is actually a windows 8 partition, not 8.1, and will not work.
Seems like a lot of effort but I want to retain the OEM key and software set (because it's surprisingly not a piece of trash) so was thinking if I install windows 8 (I have an ISO and another key) over the existing 8.1 partition it may actually allow me to then do the normal recovery.
Since the recovery drive did not work I decided to clone the recovery partition and have the WIM file now, although since cloning the partition when running recovery I no longer have the option to create a recovery drive using the recovery partition, the partitions no longer show as recovery partitions in disk management but instead as OEM partitions (Not sure why this changed.)
The recovery xml configuration for REAGENTC does have the correct GUID's and offsets for the partitions although when running this in elevated cmd it results in error 3 unable to run.
Am I able to create a base recovery drive from another windows 8.1 pc and use the WIM file?
Any way to tell what partition table my created recovery drive is expecting so I can adjust the current partitions to match and perform the recovery? When I try to refresh the files from this recovery I get the error "Windows system is locked" which is why I went for the full recovery.
View 9 Replies
View Related
Dec 29, 2013
I built my own PC last year and I've done several OS upgrades in that time frame. First I started with windows 7 basic which I then promptly upgraded to 7 ultimate because my university offered upgrades for $7. I then upgraded to 8 when it first came out and then 8.1 too. I put a new SSD in my PC and copied all my 8.1 data on to it I then turned the old SSD in to a second boot drive for OS X. I'm having problems with 8.1. I wanted to create a repair drive to hopefully root out and fix whatever is causing windows explorer to crash. It's not a virus I've made sure of that. I have a feeling whatever caused this happened when I upgraded to 8.1 and then copied over the SSD. What my product key is for 8.1 pro i just found the email microsoft sent me with my windows 8 key but i have no disc.
when i followed the instructions to make a recovery drive it told me that some of the required files are missing and to use a windows installation disc or media which is a problem because all my windows 8 upgrades have been done online.
also my PC currently doesn't have a disc drive i removed it because i only ever used it to install windows 7 basic.
View 1 Replies
View Related
Jul 19, 2014
I was using Ubuntu 14.04 on my laptop before. Now I want to install Windows 8. I have laptop's rescue CD. I get the following error when I tried to install Windows 8 on UEFI using the rescue CD:
"Unable to reset your pc a required partition is missing".
I think I have a problem about partitions type because Ubuntu uses ext4.
View 2 Replies
View Related
Sep 15, 2011
I am trying to install the new develp build of Windows 8 (x86) on my asus eeepc 1005pe. This is a netbook which doesnt even have a cd/dvd drive.
So anyway, I extracted the iso on a bootable usb flash drive. I boot, and when I click install it just hangs for about 10 minutes and then it gives me this error:
I tried setting the bios from AHCI to IDE. This does not work, I even get a bluescreen of death when I boot up in the current win7 sp1 install. But anyway on google I read a lot about this problem and one of the solutions is to put it on AHCI.. but not for me as it was already on AHCI. Anyway IDE is not workin either.
Just recently I installed win7sp1 on this netbook without a problem. I checked the sha1 hashes of the Windows 8 ISO and they are confirmed, so that is not the problem either.
View 9 Replies
View Related
Nov 27, 2013
I have got the recovery page that loads up first
currently using windows 8.1 OS
File:BCD
Error Code: 0xc0000034
I dont have a recovery CD or USB, so im pretty stuck at what to do now.
Currently using an Asus U32v
i5 2.5ghx
6gb Ram
500gb hd
Geforce gt 635m 2GB
View 1 Replies
View Related
Jul 21, 2014
Alright, so after restarting my Toshiba Satellite L50A16H Laptop (Windows 8.1) it gave me a blue recovery screen,
it stated:
The Boot Configuration Data file is missing some required information.
File: BCD
Error Code: 0xc0000034
Unfortunatly I haven't made a backup or recovery file to boot my computer from so I'm stuck with the issue of finding a windows 8 iso file that matches my system, i tried getting the windows 8 iso from microsofts website but it asks for a product key before it lets you download the file, the problem is that my product key is built into the laptop and Toshiba has not provided me with the key on a sticker on the bottom or through any other method. apparently its built into the BIOS. i have a 16gb USB stick that i can boot from. using a key finder is obviously not an option because i cant start up the laptop. I was also wondering if i manage to find a windows 8 iso file to boot from, will my toshiba laptop automatically fill in the product key for windows 8 as i dont have it.
View 7 Replies
View Related
Apr 8, 2014
My Toshiba Satellite Laptop has Windows 8. For some reason windows 8 wont load. It gets to the screen where you select which username you want. But from there its non responsive, I cant get into Windows, I cant restart to load it up in safe mode.
I got a Windows 8 disk which I had to change the bios to load it up. The cd loads but it says the automatic repair wont repair the laptop. I try to refresh windows 8 but I get a message saying the drive where windows is installed is locked. unlock the drive and try again. It also wont let me use system restore.
I try to use the reset pc option but I get a message saying unable to reset your pc, a required drive partition is missing.
At the start it gives me the option to install windows 8, I don't know whether to just do that? Is it ok to do with windows 8 already installed?
View 1 Replies
View Related
Aug 31, 2013
The computer is an ACER Aspire 3. 4Gb RAM. 500Gb memory.
I've been using the computer for a month and a half more or less and everything went OK only few small problems but 2 days ago. It did not Boot.When starting the PC the following appeared:
Recovery
Your PC needs to be repaired
The boot configuration data file is missing some required information.
File:BCD
Error code: 0x000000d
You'll need to use the recovery tools on your.....
The first thing I did was creating a bootable USB with Windows 8 software, it did not work. SO i used Rufus, it worked and launched the Windows 8 installation and recovery but when I tried to recover, refresh, anything it told me the disk was locked... or anything the only thing I'm able to access is Command Prompt.
I've been trying some commands that I've seen online but no luck so far. Some commands tell me "OK, successfully something" But when reboot and I change to default the boot order and UEFI then the same error appears.
View 9 Replies
View Related
Apr 13, 2014
I recently purchased an Asus X551 laptop with Windows 8 but straight the way uninstalled Windows 8 and installed Ubuntu (after creating a Windows 8 recovery drive just in case). I have since decided that I want Windows 8 back as I have found that I cannot use a lot of software on Linux. The laptop did not come with any form of recovery disk or installation disk, the only reminent of Windows 8 I have is the recovery USB that I created from within the OS.
When I plug in the USB and boot from it it brings up the recovery menu with options to reset the PC but when I click it it says something like - "Unable to reset PC. A required partition is missing".
View 3 Replies
View Related
Jun 1, 2014
I have an ASUS VivoBook X200CA that is running a Windows 8.1 Upgrade. For about 5 months, this laptop has been running perfectly without any problems and I have managed to reset the computer many times due to certain errors and problems that have arisen from software and hardware compatibility.
Recently, I went to reset my laptop, it restarted and then it took me to the WinRE screen. I went into Troubleshooting > Advanced Options and I clicked on the Reset option. It then took me through each of the various warnings and making sure that my data was backed up and then, once I had clicked on the "Reset" button, it hung for a bit and then said "Reset has failed - Required Partition is Missing".
View 9 Replies
View Related
Nov 9, 2012
I recently download Windows 8 ISO image. and i have extracted it with win rar. i have lost ISO image. and i want to make ISO bootalbe image. but whenever i add this folder to power ISO, it says none_ bootable image. how can i add boot information even i don't have boot information for windows 8.
View 2 Replies
View Related
Aug 27, 2012
I just downloaded windows 8 prof from my msdn, and I made a bootable usb stick with WintoFlash and now when I am trying to install I get this message: Windows cannot open the required file D:/Sources/install.wim. The file may be corrupt or missing. Make sure all files required for installation are available, Error code: 0x80070570. I have looked into the usb stick but install.wim is just there. And I did a disk chek in wintoflash and it found this:
Found problems with source files.
Can't find file D:sourcesoot.wim
Can't find file D:sourcesidwbinfo.txt
Can't find file D:ootmgr
Can't find folder D:oot
Can't find file D:sourcesinstall.wim or file D:sourcesinstall.swm
Total errors: 5
View 6 Replies
View Related
Dec 27, 2012
I bought a new SSD and want to do a clean install on it, however am having problems during the install process and receive the following message:
Windows 8 cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007025d
The install images was downloaded from the Microsoft website and I have tried using a USB thumb drive and DVD install disc and both receive the same error. I have used the DVD disc when I originally installed Windows 8 Pro on the same desktop but on an IDE harddrive and believe the disc should still work (i.e. no scratches on it).
Here's how I prepared to install:
1. Unplugged all harddrives except for brand new SSD (Crucial M4 128 GB SSD)
2. Changed bios settings to AHCI (before was on IDE) (using Asus P5k-V motherboard)
I'm not sure what's going on if the harddrive is corrupt, the bios settings need to be tweaked, the drive is incompatible with my motherboard or something else.
I don't want to go back to using the IDE drive to boot windows but rather use the new SSD.
View 9 Replies
View Related
Jul 23, 2013
I just bought a lenovo laptop, which came with preinstalled Windows 8.
When I turn it on the first thing I see is:
EFI network 0 for IPv4 (20-89-84-23-c3-45) boot failed
Checking media (Fail)
EFI network 0 for IPv6 (20-89-84-23-c3-45) boot failed
And then a blue screen:
Default Boot Device Missing or boot failed
Insert recovery media and hit any key
Then select boot manager to choose a new boot device or to boot recovery media
View 9 Replies
View Related
Mar 26, 2014
I have purchased a notebook(ASUS) in which Windows 8 had already installed . So no key or backup or no cd/dvd was provided and i did'not make any recovery/backup.But few day's ago the BootBCD (code:0xc000000d) is missing so that windows is not opening and a blue screen with this issue open.
So, what could i do to save my geniune window, i have only concerned with that geniune issue, it's is not important to recover my data . how can i save my geniune window.
View 9 Replies
View Related
Jan 4, 2014
I don't know how long it's been missing, if it ever was there, but I thought it would be handy to have File Explorer on the Task Bar.
I found it on the Applications page of the start menu, right clicked on it, and saw that File Explorer was already pinned to the task bar. I tried unpinning it, then repinning it, but is just doesn't show up.
View 2 Replies
View Related
Jul 6, 2014
Recently i realized that a bar in file explorer that contains "Organize" and "burn" buttons is missing, how can i get rid of it?
View 9 Replies
View Related
Dec 2, 2012
I have switched on file history to an external drive and it seemed to be working however changes doesnt seem to be saved. As an example, if I click on restore personal files I get yesterdays date i.e. 1st December, but when I click on the Desktop icon it takes me back to the 17th November. My desktop has changed since the 17th November I have added some files to the desktop but they are not showing up in file history.
There is plenty of space on the backup drive and it is set to back-up every hour. Also it states on the main file history screen that files were last copied 17/11/2012 17:33 and this doesnt change even if I click run now?
Another example, I scanned some documents in a couple of days ago but they are not in the My Scans folder in the file history. If I click on restore I get yesterdays date 1st December (today is the 2nd December) and then if I click on the Documents Icon it takes me back to the 28th November and the My Scans folder doesnt have the latest documents in it?
View 1 Replies
View Related
Dec 23, 2013
I'm trying to do a complete recovery of my Windows 8.1 laptop (The "Remove everything and reinstall Windows" option). A few seconds after I try to initiate the recovery, I am stopped by a message that says:
"Some Media Files are Missing. Your Windows installation or recovery media will provide these files"
After this message appears I am prompted to cancel the restoration. How can I bypass this message to continue with the recovery? My laptop is 4 years old and is ready for a recovery.
My laptop was purchased running Windows 7 64bit, from which I upgraded to Win 8 64bit Pro through a free download from my school. I have my Windows 8 installation key, but not the download files. I upgraded to 8.1 through the Windows Store free download.
Acer Aspire 5742
Intel Core i5 2.53 GHz (original gen)
4.0 GB RAM
View 3 Replies
View Related
Jul 14, 2014
I have an error when trying to restart my computer to factory settings. I am running on windows 8.1. It used to say "Could not find recovery environment" but after looking on forums for the day I got it to say the new error (Which I think is better than the old one). So when I go to settings it then change PC settings, than update and recovery, than recovery than remove everything and re install windows, It gives the error "Insert media, some files are missing. Insert recovery disk or drive" I want to restart it because my computer had randomly switched to a temporary profile, than i fixed it but the "temporary" profile was the new one I had to use and there are many messed up things happening with it. I do not have any disk or my windows activation code. Also, I have used a partition manager before to change the size of one of my partitions (The windows one) ...
View 9 Replies
View Related
Apr 9, 2013
Firstly I created a partition of 1 GB on my 128GB OCZ Agility 3
Then I used bitlocker to encrypt it, and then for some reason when I tried to reboot the computer after doing the aforementioned, I get the message that windows cant boot, because the boot configuration is missing or conatins errors
I dont see how BitLocker and Disk Management can screw something up so much so that they either deleted or encrypted my boot config rendering me unable to boot up the computer.
What I did was shrinking the c:drive by 1000mb then formatted and partitioned those 1000 mb into a new drive. Secondly I encrypted the 1gig with Bitlocker with a short 12-character password.
I am now unable to boot up my laptop.
View 1 Replies
View Related
Apr 8, 2014
I downloaded a ps2 emulator and when I go to update my diretcx I get the cabinet file missing and the certificate is invalid.
View 2 Replies
View Related
Apr 24, 2013
I bought a new laptop 350gb HDD with Windows 8 64bit preinstalled (no disc came with it) however I needed win7 32bit for my job since the softwares used are only compatible with old win version. I managed to back up my Windows 8 before I partitioned my HDD into 3 drives and installed win7 ultimate 32 bit on a different partition. I remember that my Windows 8 was installed in Drive C (100GB) while I have 80+GB for Shared files on Drive E and the rest of the memory are for Drive D where I installed win 7 and I labeled each drives accordingly. At first everything was working fine on both O.S, it was giving me the dual boot option at start up but I forgot if I really have tested running both O.S. before I gave my laptop to my supervisor and asked him a favor to intall the softwares for work purposes.
My supervisor then approached me and said that there might be some incompatibility issue with the updates I have on my win7 coz some applications don't install so he asked me if its ok if he reinstalls a new win7 so I said yes since Im confident that its will work fine and I have backed up my Windows 8 anyway, in short, I left everything into his hands. Later, he then got back to me and told me every job related softwares now work except that my Windows 8 now doesnt show and yes, dual boot option is not there anymore and it boots automatically to win7 like Windows 8 is not there.
I've read some forums how to check if your O.S are still there and it could just be a boot up issue and use of Easy BCD might work. I have attached images below for your reference. Now what I'm confused of is that my Windows 8 appears to be in Drive D and win7 could be in Drive C, which I'm thinking if they were exchanged when my sup reinstalled win7 or he may have overlapped my Windows 8. Im pretty sure he knows which drive is for which O.S since I labeled them. Now Im afraid to use EasyBCD on the wrong drive and I cant approach my supervisor anymore to bother him again since he worked on my laptop for almost the whole day at work.
- if both o.s. are still intact and recognized
- why the Drive letters got mixed up and how to check which drive has which o.s coz it seems like both drives has a part of my work related applications (didn't put personal files yet on win 8 when I had both o.s installed)
- is Drive D really is my Windows 8 now?
- does Easy BCD really work
- how to use Easy BCD to get my Windows 8 to boot up to or both of them to show at start up without corrupting my work related softwares
Attachment 20900
View 6 Replies
View Related
