Edit: Successfully upgraded to 8.1 after uninstalling 3rd party Wifi drivers, Vid card drivers, mouse drivers, keyboard drivers and then upgrading Intel chipset drivers to Version 9.4.3.1011 WHQL from [URL]
Everything works. Damn drivers prevented the install from completing the first time
I upgraded my Win 8 to Win 8.1. After hiberanation or shutting down a computer I'm stuck on boot screen when I turn it on (there's a win logo and circle stops spinning) and I need than to turn off computer by pressing the turn off button. After the restart there is no problem! And after I forcely shut it down, there is no problem also!
I tried clean install (fresh windows 8.1 with formatted hard disk), refresh your pc, startup repair - nothing works.
While I was on windwos 8, I didn't have any problems!
I installed the windows 8.1 update thinking it would just upgrade the system but it looks as though it's done a reinstall. I've now got loads of things not working, my programs have lost lots of there settings and it seems really slow.
I'm currently restoring a true image back up and I'm praying it's going to work , I don't think I'll bother with 8.1 until I reinstall the system from scratch.
I need to change some setting in my UEFI/BIOS but it is stuck in ready only mode. All options are blanked out except for "exit". How can I get it to let me edit the settings again?
View 9 Replies View RelatedI'm currently running Windows 8 that my laptop came with. I decided to wait for the official 8.1 release in October instead of the Preview.
I have a lot of Calendar reminders on my Windows 8 Stock Calendar and I was wondering when I upgrade to 8.1, will those reminders disappear?
I'm asking this because I've been reading a lot of articles that you have to re-install your apps and settings after the update.
Although you probably can't confirm this until it has released (I guess). Has any user lost their reminders on when they switched from Windows 8 to Windows 8.1 Preview?
I bought a Win 8 Pro 64 bit upgrade dvd in order to upgrade from Win 7-64bit. After completion I downloaded win 8.1 pro upgrade from the store. At the end of the installation it says "getting devices ready". It starts the process showing the rate and it gets stuck at 6%. Turned off the laptop (by disconnecting power and battery) and got the following message:
".......... Could not complete the update to Win 8.1 ......... error 0x1900101-0x30018 "
I tried to install this upgrade a third time to no avail.
I checked that I got all the win 8 updates.
I did a system restore.
I updated the nvidia driver.
I checked the requirements, including CMPXCHGb support in my 64bit version, by using Coreinfo.exe.
The PC boots up and I can log in ok but I am unable to open any browsers, use the start bar or actually get in to most programs, use the search function or get in to any settings as it just hangs.
I can get to the start menu through charms and I can access My Pc from there but opening control panel hangs as well. I am also unable to get to the troubleshooting and repair.
I have tried to restart and press and hold the shift key but it just hangs again when restarting, also tried to log out of my profile but that also hangs.
I have tried to boot from a USB with a windows 8 ISO to get in to the repair from there but that doesn't seem to work - Also the windows product key shows as 'not available' ?how to actually do anything with my now expensive paperweight that has a pretty but non-functioning desktop screen ?
I have a Toshiba (satellite) laptop and it has just been upgraded to Windows 8.1. I made recovery discs before the upgrade but would like to backup again after the upgrade so i don't have to revert to the factory set-up or refresh option as I have already had that experience and i don't want to go that route again! My laptop is only 9months old & running fine so far with no issues, i can back-up my documents etc to my flash drive but i would like to back up, 'or do you call it copying', the whole setup so if i have a problem i can re-install the whole lot as it stands from today. I have increased the system restore percentage bar to allow more restores points as another safety option.
View 7 Replies View RelatedI have a Dell Venue tablet running Windows 8.1 Pro (32-Bit) and have been having a bit of an issue getting PIN login to work since refreshing the tablet recently. I can access the settings and set a PIN for login, but when I unlock the screen it only allows a password to be put in.
View 7 Replies View RelatedI take a File History snapshot every night. I have had to do a restore of my c: drive and need to apply my File History for four days. How to do this because I have never done it before.
View 3 Replies View RelatedBought a new Acer all-in-one and immediately upgraded it to 8.1 via a 3GB DL. Went perfectly.
Cleverly (I thought) I saved the update files should I ever need to do the update again.
Then the Acer had a hardware problem so I returned it to Best Buy for a replacement.
Now, I try to apply the 8.1 upgrade files that I previously saved from the store DL to the replaced computer.
It asks for a key, but won't accept either the one from the new replaced machine, nor the one that I returned.
Are these licenses now tied to an individual computer, via a unique code embedded in the BIOS or some such??
I really don't want to do the DL again, since my bandwidth is metered and 3GB takes a good percentage of my total monthly quota.
Windows Office 2007 - There is no better - however the migration to Win 8 ruined all my default settings! Anyhoo, I have already sussed out that one may apply headers and footers to repeating pages, but I'm very confused as to how one may apply ones business design - which is a WHOLE page, over which I type my gumpf... So far, I just insert a text box onto the page, but this only works for one page at a time. The answer should lie in converting it all to a JPG.
View 6 Replies View RelatedIs it normal for Windows 8.1 to show "Applying Updates" after a BSOD crash? I saw this happen on my desktop earlier this week and now on my laptop. I checked the update log and there was no update applied immediately after the crash.
View 1 Replies View RelatedYesterday, I clean-installed Windows 8 Pro x86 on an old Dell Vostro 1400 laptop which had been running Windows 7 Ultimate, and it activated and ran fine, without even a single exclamation point in Device Manager. I applied the update necessary to make the Store offer 8.1 and proceeded to install it as I've done on a couple other machines. After downloading the thing, it errored out with:
Couldn't install Windows 8.1
Contact your PC manufacturer to see if you can upgrade the System BIOS
When I clicked the OK button, it then gave me the informative and grammar-challenged error box:
Something happened and the Windows 8.1 couldn't be installed. Please try again. Error code: 0xc1900104
Try again Cancel
Ever the optimist, I clicked Try again, and of course, it proceeded to download all over again from scratch, only to error out in the same way. I then downloaded all the Windows 8 updates, although just the one had been necessary on my other machines that successfully upgraded to 8.1, and tried again, only to get the same result.
Today, I've discovered the Windows 8.1 Compatibility Assistant, which avoids the lengthy download of the upgrade every time (Microsoft, maybe you should run it implicitly before downloading 3 GB of transient data), and it tells me:
This PC doesn't meet system requirements
Contact your PC manufacturer to see if you can upgrade the System BIOS
Obviously, no BIOS updates are available, and what exactly is the problem here with my BIOS. The obvious googling turned up nothing except some people with Sony Vaios that had the same problem, which was corrected with a BIOS update, and of course, there is no information on what their BIOS update does to make the 8.1 upgrade possible.
I've just upgraded from win8 to win 8.1 using the windows update (store), my questions are :
1. Can the ISO file that was automatically downloaded by the system during windows 8 upgrade to 8.1 be saved or backed up? the download was about 2.6 GB.
2. If so can the backed up file be used to do a "clean install" in future on the same machine?
My laptop has two users, once called work and one called gaming, and when i tried to log into work yesterday, the welcome screen with the spinning dots just kept going. the only way to stop it was to power off and reboot. at first i thought there was something wrong with it, but i tried logging into my other user (gaming) and it worked perfectly fine. i can even access the files in the work user from the gaming user.
View 4 Replies View RelatedMy laptop went lagging while i was using it, so i restarted my laptop. After that, my laptop went into a mode that i have never experienced before. I clicked advanced setting, It made me choose either to restore it, reset it, and another one but i can't remember it. I chose the reset button, and currently it is stuck on RESET YOU PC. And its taking a very long time. I don't have my recovery disc or drive. I saved it before on a flash drive, unfortunately it died.
View 9 Replies View RelatedMy laptop won't start it's stuck in a restart loop and gives me an error message saying there were a problem and it needs to restart, but it does the same thing when it restarts again.
View 9 Replies View RelatedMy windows 8 laptop won't load from the welcome screen after i have typed in the password. After a long time it takes me to the desktop but i dont see any icons.
View 3 Replies View RelatedI have a pretty new computer. Just a few months old. It is supposed to be a good one.
Dell XPS 8500
Quad core i7 processor
lots of memory and extras
This computer also has the 64 bit edition of Windows 8 installed on it. Windows 8 is driving me up the wall!!! I have had numerous problems with it since day 1.
As recently as a few days ago, my system was running reasonably okay. Then I downloaded a driver for my network card from the dell.com website. From that point on, I cannot get my computer to boot up properly. I have turned my computer off and on multiple times in hopes that it would correct whatever is wrong.
When I first turn my PC on, it will stay stuck at the Dell logo window for a while.
Sometimes it will make it past that and it will give me an error message that says:
"error sending end of post message to ME, system HALT!"
Also, I sometimes get a message which says:
"the last USB device you connected to the computer malfunctioned, and Windows did not recognize it.
Try reconnecting the device. If windows still does not recognize it, your device may not be working properly."
This is insanity. I have NOT connected any new USB devices to my computer.
I do not know what to do. I figured that the easiest thing might be to try simply reinstalling Windows 8 from scratch. So I inserted my Windows 8 reinstall disk that Dell sent me when I bought this thing. However, my computer will not boot from this disk. So I guess I am stuck.
I was casually using my pc and it suddenly shutdown. I tried to restart it, but it's stuck on black screen. Here's the thing there was no windows logo or no bios or no nothing appeared on the screen. It just goes black even if I restart it a hundred times. I am sure the cables of the monitor are fine and I am also sure that there are signals coming from the pc.
P. S. I even ASSUMED that the pc must have switched on and typed password to login and waited enough to get it to sleep mode and then recover from there. But still no luck.
I wanted to upgrade it manually to windows 8.1, so i used a usb keyboard to access bios settings and I disabled uefi. After reboot, i got a bootmenu which didn't booted in my usb installation. I messed up then with the bios, and after rebooting i couldn't even use the keyboard anymore. I am stuck now at the boot menu.
View 2 Replies View Relatedi just got a new laptop with window 8. at the personalize screen. i wont let me connect because it say i need to check box to accept the license terms. but i dont see the box to accept the license terms anywhere on the screen. where is the box to accept the license terms at?
View 2 Replies View RelatedI recently got all 5 restore disks, language disk, 3 of 3 recovery disks and the 1 of 1 system disk. I followed the instructions and on the 2nd thing where I did not need to insert a disk, I believe it was calling Passwords or something, forget. But it was at 96% when it then started doing [RETRY] about twenty times.
After that, it says ImageX Error: System could not find specified file.
I followed the instructions. After I hit "Ok" it started beeping until I shut it off. Now it won't even boot up. All it says is "Preparing Automatic Repair" and then goes black, then "Diagnosing your PC" comes up. This is the reason before I had to buy the disks, but it'd still turn on. Just not onto the desktop screen.
When I boot up my windows 8 pc it gets stuck on the alienware loading screen. It finishes loading but gets stuck. The page is un·responsible - so that means i can't use F2 or F12.
View 1 Replies View RelatedI've purchased my Lenovo Twist (came with Windows 8.0) about a year ago and I've upgraded to windows 8.1 when it was released in the windows store. Months after I upgraded I ran into a few problems, I was unable to access apps on my metro screen. None of the solutions worked so my only choice was to refresh or reset. I've tried going into the recovery option on boot and the refresh option on the settings both said I needed installation media. I was unable to create a recovery media because the checkbox was grayed out on the "Create a Recovery Drive".
After doing some searching I decided to download the evaluation copy of windows 8.1. I extracted the Install.wim file and set it as my OS image on reagentc.exe. I was still unable to refresh because it said "The drive where windows is installed is locked". The reset option worked, after I completed the reset I was expecting it to bring me back to windows 8.1 instead I was on the evaluation version.
I also noticed that the F11 option on boot disappeared after the reset.
I was using my laptop yesterday when I went to lock my account. When I did this, the laptop presumed to shut off. It now boots up fine, but I cannot pass the Welcome Screen to login.
View 1 Replies View RelatedI have 2 accounts on this PC, one is a MS account, the other is the built-in Administrator account, which I renamed and assigned a complex password to make it difficult for anyone to get into. However, I recently disabled the Admin account with the "net user administrator /active:no" command, and then deleted both the Administrator and Enigma (the name which I renamed it to) folders in C:Users. I also went into Control Panel and made sure that the user is gone, it does not appear now. I can still log into my PC via the MS account since it has admin rights.
But after rebooting the Admin/Enigma account still appears on the login screen and asks for a password. So I reenter the old password and it then hangs with a "Preparing Windows" message. Then I do a hard reset and log into the MS account, I can see that a TEMP folder has been created at C:Users, which I assume was created as a result of trying to log in as Admin/Enigma. I'm not sure, but I'm guessing that the PC still remembers the password and other info associated with the account, and that info must still be stored somewhere in the Registry. That seems to be the only logical cause of the issue.
So, I need locating that info and resetting it, because I intend to reactivate Admin again, but this time I'm going to leave it alone. I had deleted it in the 1st place because of the appearance of 2 usernames for the account at C:Users, and found that odd, so I figured I could get rid of both and then recreate/reset. I rarely use the account anyways because it is a security risk, and only to do a handful of things that I've had trouble doing with the MS account, despite it having admin privilidges.
About a week ago I had the same exact problem. When I would turn on my pc it would try to diagnose my computer, repair it, and then fail and find no problem. I didn't find any solutions so I did a fresh install. Now its happening all over again. I originally thought the problem was my OS and re installing would fix my problem. Now I think that my SSD (OCZ Vertex 450) might be the problem.
I think that disabling automatic repair could also fix the problem, but I don't want to turn that off and cause another potential problem if it wont stop the boot loop. I also have a hard drive which I could install windows on if I need to, but I am not sure my SSD is the problem and if it cant be fixed. I haven't been downloading anything lately, and I formatted both my SSD and hard drive when I did a clean install so I don't think the problem is a virus.
Asus laptop Windows 8 stuck at Resetting PC 2%, Only option is hard reset??
This laptop belongs to my Grandma (87 years old). **She did not make the recovery disk for the computer.**
I got to the Recovery options and it has been stuck at 2% for about 6 hours. Asus OEM X55C Windows 8
NOTE: Yesterday I told Grandma I would see what was wrong, but it would bug out, freeze, etc when trying to log into the administrator. The screen would go totally black and then freeze. So, the computer has shut down improperly several times.
However, it did repair the disk last night before I attempted this recovery.
I recently upgraded to windows 8.1 from windows 7. Installation went fine and first time I loaded into windows perfectly. I only installed the following: killer enthernet driver and google chrome (also nobodies graphics driver)I reset my computer and it goes through the logo then goes into a blank blue screen where I can move my cursor.What I've tried: I can log into safe mode. Right now I am resetting the PC (file wipe). I can't seem to attach an image on mobile.
View 4 Replies View Related