Win 8 Computer Always Configuring Windows When Start / Restart
Aug 26, 2013
I have a laptop with windows 8, and everytime (or almost everytime, about 4/5 of the times) when I start/restart it, it says that it's configuring windows, please do not shut down your computer. This takes about 20 minutes each time and is really annoying.
Also, I'm not sure this happens all the time, but the first time this happend I just sat by my computer and waited. There I saw that first it was configuring, then when that got to 100%, it said "Configuration failed", then it said "Restarting" and started all over again, but the 2nd time it finished successfully and the computer started.
Since then, I haven't bothered sitting by my laptop and waiting for it while it updates, so I go do something else. So I don't know if that "Configuration failed" thing happens everytime or only that time.
View 4 Replies
ADVERTISEMENT
Feb 19, 2014
So, since yesterday, Windows 8.1 tries to boot, then gets halfway through, shows a sad face for a second, and then restarts. It does this again and again. Just get the message "Failure configuring Windows updates. Undoing changes. Don't turn off your computer" then "Configuring Windows updates, 30% complete. Don't turn off your computer".
Then it boots, does the same thing again.
I've tried booting from the install media, but Refresh doesn't work, nor restarting in safe mode. Weirdly, pressing F2 to load BIOS, which always used to work, no longer does, it just continues trying to load Windows.
I've got an oldish PC, around 4/5 years old, with Windows 8 installed. Its got a fairly decent processor (at the time), a Q9550. Intel DP43TF motherboard.
View 3 Replies
View Related
Oct 30, 2012
I have problem with Windows Update and i see that i am not only there. My problem is, after install updates and restart system, i get message after some time "Failure Configuring Windows Updates. Reverting Changes ..."
My Windows is Windows 8 RTM and i tried install updates manual but nothing change.
I attach screesnshot where is problem in updates ...
1234.jpg12345.jpg123456.jpg1234567.jpg12345667.jpg
View 9 Replies
View Related
Jun 10, 2014
I purchased a new ASUS LAPTOP which came with windows 8 installed. When i tried to restart after installing Gtalk i got this message.
"Failure configuring windows updates. reverting changes. do not turn off your computer ".
I got this on last friday i.e the 6th of june, ever since i am not able to do anything with my laptop. I don't have windows 8 dvd as well. How do I reboot it?
Model number : Asus 15634 Laptop Intel Core i3 .
I also tried pressing the power button for 15 secs , still no luck. Tried f8 f9 and windows + r and windows+ X keys no luck.
View 9 Replies
View Related
Jan 18, 2014
After upgrading a Dell XPS One using both Intel HD 4000 and nVidia 640M graphics, the computer takes 5 minutes to restart. The restart screen immediately shows up after hitting the restart button. Then the screen goes black for 5 minutes. Afterwards the Dell logo shows up and everything starts fine from there. I don't understand why the monitor stays black for 5 minutes before restarting.
View 4 Replies
View Related
Sep 15, 2014
When I return to my computer after it has been asleep for a while I cannot get it to restart. I have to turn the power off and then back on in order to reboot the computer.
View 6 Replies
View Related
Feb 2, 2013
I've had my windows 8 computer since December and for the past month or so it will not restart or shut down unless I do a hard shut down with the power button. When hitting restart it starts to shut down, then comes up with "restarting" screen and just stays there, never moves from there. On shut down it just freezes after closing down windows. It can't be good always shutting down via the power button. I haven't added any new programs at all so not sure why this started happening.
View 9 Replies
View Related
Jan 26, 2014
So this is a problem I've had with my PC for a long time now, and just never got around to finding a solution. Half the time when I attempt to restart my computer the computer just freezes at the restart screen. So installing software generally results in a crash, I feel as though since my computer simply crashes during half the windows updates that issues are going to begin to stack up.
View 9 Replies
View Related
Apr 3, 2014
Everytime I off this computer in 5pm, and open it in 8am it's changing the Language like this picture.
what I do is Recover my Computer using 'Automatic System Restore' to get back.
View 2 Replies
View Related
Jan 24, 2013
When my computer restarts, it seems to never end. I once waited 20 minutes for it to restart but it was still at the same screen. Now whenever it goes into restart, I just hold my power button until it shuts down. I don't think it's good for my laptop so I want to figure out a way to have a fast restart. I got this laptop 3 weeks ago and it always had this problem. My old laptop restarts in under 2 minutes.
View 1 Replies
View Related
May 16, 2014
I just recently installed a new anti-virus software (Kaskersky Anti-Virus 2013) and it runs perfectly (or so I thought).
The only problem that was plaguing my computer was after I restarted it (via the Sidebar and pressing the power icon and clicking restart) and it would "hang" at the restart screen for about 30 seconds.
The pixel icon next to the word "Restarting" would freeze mid spin (I could still move my mouse), but then it would continue to function normally.
So my question is simply: Is this an issue to take action against or is the Anti-Virus software preventing a proper restart?
NOTE: When I start a normal "Shutdown" this problem is absent and the computer shuts down in about 6 seconds.
View 1 Replies
View Related
Oct 9, 2013
So when I make an invisible icon, it is fine until I restart my computer then it turns black, of before restart and after.
View 9 Replies
View Related
Feb 9, 2014
I'm having an issue where if my USB devices are plugged in when i start my computer they are fine. but if i try to plug in a thumbdrive after it's already been turned on it won't recognize it. nothing.
Just Ran the SFC /scannow and i don't know what to make of it. it is attach The Attached file has the SFC details. not sure what to make of it.
Running
Windows 8.1 x64
Gygabyte: z68a-d3h-b3
(will attach more if needed.)
View 1 Replies
View Related
Nov 19, 2013
I have solved this issue by not leaving my laptop plugged into my television through HDMI while it restarts to install updates. If you run into this issue, make sure you try leaving all ports open on your computer.
A few weeks ago my PC ran into a Blue screen of death error. I'm not sure why or exactly when it happened, but I think it may have led to the issues I have now. About 3 weeks ago (I think) I was playing a game and the forced restart to install updates thing popped up. It said I had 15 minutes before my system would restart and install updates. I was a bit cranky at the time, so I got mad and decided to look up on the internet how to disable forced restarts for windows 8. I came across a thread on a site much like this that explained how to open your system registry and delete the forced restart file or something similar.
I opened my registry and couldn't find it, so I ended up not deleting anything, but I did keep my registry open on accident and my computer restarted while it was open. It crashed during the update install and gave me a BSOD error. I restarted my computer and it began installing updates yet again. It got to 30% and then went black. A few seconds later, the Asus logo popped up with the loading circle below it. It said attempting to repair or something similar to that. It eventually failed to repair, so it asked if I would like to proceed with a system restore. Seeing no other options, I clicked yes. The screen went black again and the Asus logo showed up with the loading circle below it. It failed to system restore and took me to a blue screen that isn't the BSOD. It said there were other options like refreshing my system, and it assured me that I would not lose my files (but it said nothing about apps).
I decided to do that over the manufacturer restore. It worked, but I lost all of my apps that I had installed. After redownloading and installing all the apps, I thought it would be over. About a week later another windows update popped up. I thought it would work fine this time, so I let it go. The same thing happened, and I ended up having to system refresh again. This happens every time my computer restarts, and it is very aggravating. I'm not sure what to do about it, although I haven't tried to manufacturer restore yet.
TL/DR; My computer has to system refresh every time it restarts, causing me to lose all of my apps and have to reinstall them each time. I think it has something to do with my computer restarting to install updates while my system registry was open.
I wasn't sure what to provide for specs, so I'll just add in the usual Ram and stuff:
Processor: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz 2.40 GHz
Installed memory (RAM): 8.00GB (7.89 GB usable)
System type: 64-bit Operating System, x64-based processor
Pen and Touch: Full Windows Touch Support with 10 Touch Points
I added the SF_19-11-2013.rar file to the post because I just saw the requirements >.>
View 3 Replies
View Related
Dec 14, 2013
Title says it all. You can restart Windows explorer via task manager, but can I do the same with start screen? Because I changed the amount of tile rows on it, but I have to log off. Unfortunately, I am running a server which people are on currently and I'd hate having to wait a couple more hours to try this..
View 7 Replies
View Related
Dec 28, 2012
From Winbeta: Simply copy the following code into a new txt file and rename it to whatever you like, just add the .vbs to the file extension. For example: shutdown.vbs. Once this is done, simply double click the script and it will create the tiles for you. If you are unable to create a .vbs document, make sure you have "show file names extensions" enabled in Folder Options within Windows 8.
set WshShell = WScript.CreateObject("WScript.Shell")
strStartMenu = WshShell.SpecialFolders("StartMenu")
set oShellLink = WshShell.CreateShortcut(strStartMenu & "Shutdown.lnk")
oShellLink.TargetPath = "%systemroot%System32shutdown.exe"
oShellLink.Arguments = "-s -t 0"
oShellLink.WindowStyle = 1
[Code] ......
"Shutdown, Restart and Log Off buttons have been created. You can now pin them to the Start Screen of your Windows 8 computer (if they are not already there)."
View 6 Replies
View Related
Apr 18, 2014
I purchased a new computer in the last few days, pre-installed Windows 8. I was having the odd error message where Chrome would stop working and reload. Or sometimes an error message saying my computer would restart. They are different messages:
Memory Management
IRQL_NOT_LESS_OR_EQUAL
Special Pool Detected Memory Corrupt
I downloaded all updates for Windows 8, then updated to 8.1 and downloaded all but one update available (Bing Desktop). I am still getting these BSOD. Sometimes in Chrome, sometimes in Steam, and sometimes randomly
I've run the Memory diagnostic tool in Windows, and it found no errors. I've attached the SF Diagnostics folder which was created.
View 1 Replies
View Related
Mar 8, 2013
I have been running Win 8 on my ASUS Q200E Laptop and have been puzzled by the difference in the startup times between a cold, power off start up and a restart startup. On a cold startup, the desktop is completely ready to use in about 20 seconds. With a restart, it takes about 38 seconds to get to the same point.
View 3 Replies
View Related
Oct 28, 2013
Am "using new HP laptop 2000-2d27dx Windows 8.1. Only way I shutdown or restart is going to "charms" panel - Settings - then click Power off icon and choose Sleep, Shutdown or Restart. Is there a way to put a SHORTCUT for Shutdown and Restart on the desktop and/or the Start screen?
View 6 Replies
View Related
Jun 19, 2014
BSOD error. I've read through some posts with similar errors and I've done my best to try some of the basic solutions for this (i.e., update drivers) but can't seem to pin down the actual problem.
I woke up this morning and I had a Driver Power State Failure message on my computer. I've spent all day trying to get it fixed and I'm about to throw this 3 month old laptop through the window (I'm running a Lenovo Y510P with Windows 8.1).
In addition to the BSOD when I try to shut down my computer it never actually shuts down. The screen will go black for about 5 minutes but the light on the power button stays on and the computer starts back up again on its own. However it never actually gets to the desktop. The circle of dots just keeps going and going and after I force it to shut down twice the Automatic Repair kicks in but it says it couldn't fix the issue. When I enter the advanced options and do a system restore I can finally get to the desktop. When I try doing a system restore from the desktop it will get to the end and I get an error message saying it didn't work.
When I get to the desktop some things just don't work right. Right click on a folder, clicking on the file explorer pinned to the taskbar, etc. locks explorer up for a minute then nothing happens.
I've also ran SFC and a it said some files were corrupt and couldn't be repaired. Attached are my log files.
View 5 Replies
View Related
Jan 16, 2013
When I start my computer startup is slow and then when I get to desktop all the programs that are set to start at startup don't start. I try to launch google chrome and it never starts. For some reason, when I open folders it opens fast. Now here is where it gets weird. It appears that using the force restart button on my PC.
View 3 Replies
View Related
Aug 21, 2014
Recently I decided to go ahead and update to the Windows 8.1 version of the Realtek HD Audio Driver. I procrastinated because it told me I'd have to uninstall the original audio driver and I knew it would take a while to do everything needed. It didn't work that after uninstalling the original audio driver, then restarting like Windows told me to do, I kept getting error messages that forced my computer to restart until eventually my computer let me log in and install the updated audio driver.
However, with the updated version of this driver I had the same issue I got with the original one only much much worse. The original Realtek HD Audio Driver that I had on my computer made music and videos sound absolutely awful when headphones were plugged in. I found out that this is because the driver automatically puts on so-called "enhancements" whenever headphones are plugged in. This was a very simple fix, simply go to "Sound", then under "Playback" you click on "Speakers", then go to "Enhancements" and check the box labeled "Disable all sound effects." Then sound through headphones would return to normal.
Well, with the Window 8.1 version of this audio driver, I can do the same thing, but it never stays that way. Every time I plug in my headphones, it resets back to having enhancements. The strange thing though is that it says the enhancements are disabled but when I reactivate the enhancements(No difference in sound quality) then deactivate it again, suddenly the sound through my headphones is back to normal.
Did the audio driver not install properly? Is there something I can do to permanently disable the audio enhancements?
View 5 Replies
View Related
Dec 31, 2013
I have a laptop that's only about 5 months old and runs Windows 8. When I had to pack it up to go, I went to shut it down, and it started doing the windows update. I closed the laptop, packed it up, and left. When I start it back up, I see a screen with two options: Troubleshoot and Power off your PC. When I click trouble shoot, this is what I see:
Refresh your PC, and Reset your PC, Advanced options.
When I click refresh my PC, it says "The drive where Windows is installed is locked. Unlock the drive and try again.
When I click reset, it says, "Unable to reset PC. A required drive partition is missing."
When I click advanced options, this is the screen : [URL] ......
The four options are: System Restore System Image Recovery Automatic Repair Command Prompt
When I click System restore, it says I need to restart the PC, and select an OS and then select system restore, but I have no clue how to do that.
SIR says "The system cannot find the file specified (0x80070002)
Auto Repair says that it cannot fix my PC. No reason why.
View 13 Replies
View Related
Mar 11, 2014
I recently re installed Windows 8 then upgraded to Windows 8.1 because I was having BSOD. Now on the fresh install, which is 4 days or so old, my computer BSOD on start up like before.
My guess hardware failure or Norton....
View 5 Replies
View Related
Sep 28, 2013
While trying to add folders to the Search Index, I was informed the Windows Search process was not started. When I go to the Services Console and attempt to manually start, I am given the error:
"Windows could not start the Windows Search service on Local Computer.
Error 2: The system cannot find the file specified."
So I opened an command prompt with administrative level access to run sfc and received the following error after it was complete:
"Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log. Note that logging is currently not supported in offline servicing scenarios."
The CBS.log file is too large to upload to here or paste into pastebin, so here is a dropbox upload of it:
What other way, aside from a repair install, do I have to fix my missing files and services?
Specs:
Processor: Intel i5 2500k @ 3.3GHz
OS Name: Microsoft Windows 8.1 Preview with Media Center
Motherboard: Z68A-D3H-83
Installed Physical Memory: 8.00GB
View 8 Replies
View Related
Sep 26, 2013
"Failure configuring Windows features. Reverting changes. Do not turn off your computer."
Stuck on this loading screen and I can't get out! What do I do?!
View 1 Replies
View Related
Apr 17, 2014
After a windows update crashed during startup, my laptop is taking 20+ minutes on the "welcome" loading bar after you login. The login screen itself it very laggy and takes 5 minutes to navigate. The "Lenovo" loading screens upon startup takes 3 or 4 minutes.
Occasionally a black screen will appear and I cant get past it in the loading process.
View 4 Replies
View Related
Feb 11, 2014
I have my laptop set up so I don't have to enter a password each time I start it. But I recently changed my password in my Microsoft account by going into Microsoft.com. Now when I start my laptop, it stops half way giving a message that it has an invalid password. At this point, I just enter my new password and it finishes booting up with no problem.
So my question is how do I synchronize the password that my laptop is using to the new changed password in my Microsoft account?
Just as a note, I forgot the password that I had originally set up on my laptop.
View 4 Replies
View Related
Nov 1, 2012
I am looking for a way to set an app to automatically start when the computer is booted. What i am trying to archive is a Clock tile that i don't have to open before it shows the time. I am using the app Tile Time.
View 1 Replies
View Related
Aug 7, 2013
After installing Google Chrome and making it my default browser, I looked on the Start Screen and could not find a Chrome tile. The All Apps screen did have one and when I right clicked it, it indicated that it was on the Start Screen as it had the "Unpin from Start" icon. After trying various methods of getting it to show up, I did unpin it, which also removed it from the All Apps screen of course, then did a search for Chrome, started Chrome and then closed Chrome. When I then tried to go back to the Start Screen to see if there was a Chrome tile, I was greeted by a totally empty screen. I rebooted Win 8 and everything came back normal (I hope) but now with a Chrome tile.
View 1 Replies
View Related
May 23, 2014
I had a HDD go bad, so I set up 2 250gb Drives as a raid 1 setup. Windows 8 worked great before HDD Failure, but now after re-installing 8.1, it only runs for about 5 min before I receive DPC_WATCHDOG_VIOLATION. Dump Files are included below.
[URL] .....
Also, I have 3 monitors attached. The main Monitor displays the error, while the right monitor remains at the desktop and the left monitor shows a distorted blue screen. (Not sure if it matters..)
View 1 Replies
View Related
