Updates :: Windows 8.1 Update Not Installing - Error 800F0922
Jun 11, 2014
I just bought my computer 2 weeks ago .. I filled in my specs and also uploaded my system info information as an attachment. Last night, I tried to download the windows 8.1 update. I let it run over night, but this morning when I woke, I had a blue screen that said windows could not fix my problem .. and gave me options to try. I ended up having to wipe my computer to factory conditions. After the restore .. the only thing I installed before downloading updates was my driver for my NVIDIA Geforce750 Ti card, and my wireless network adapter ..
I then downloaded 91 updates .. all failed .. and didn't install .. error 800F0922.
sfc /scannow .. got to 51% .. then ..
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log windirlogscbscbs.log. For example C:windowslogscbscbs.log. Note that logging is currently not supported in offline servicing scenarios.
View 1 Replies
ADVERTISEMENT
Feb 17, 2014
About a week a go I had to refresh my computer and had to therefore revert back to Win 8 and re-install updates. However, I now have 81 important updates that refuse to be installed and getting the errors 800F0922 and 80071A91 as you can see from below:
I have tried some suggestions that I've found around the web, such as using the Action Center Troubleshooter, Windows Update Diagnostic, SFC and DISM with the following effect:
However, the problem still persists. I also went through and tried to install every update individually, but no luck there either.
All of these updates are also ones that require a restart, I have managed to successfully install a couple that did not need a restart.
View 9 Replies
View Related
Jun 28, 2013
When I download some windows 8 updates - not store updates - and restart the PC. After windows boots to desktop it shows me that they are all installed, but after a few minutes they come back as uninstalled and when I install them again the problem continues. What should i do?
View 4 Replies
View Related
Dec 26, 2013
I would like to stop a specific update from installing, but am having trouble doing that. I can stop all updates from being downloaded by making a registry alteration, but this keeps me from downloading any updates.
View 5 Replies
View Related
Jan 28, 2014
Today I received a prompt to install 4 important updates. These seemed to download OK (total 32MB). I don't know what exactly was included in these updates, I just clicked on Install and carried on with other tasks and operations.
After a little while I got the usual prompt to restart my computer to finish installing updates. I did this, the shutting down message appeared followed by 'Keep your PC plugged in until this is done. Installing update 3 of 4'.
This was at 1536GMT. It's now 2223GMT in my timezone and I've still got thie same message displayed with no sign of any further progress. Should I disconnect the main power supply regardless of the message, or is there another step to take? I vaguely recall this happening when I had Vista, which I eventually abandoned.
View 2 Replies
View Related
Feb 22, 2014
My new HP ultrabook was doing updates ... And it came up with the screen saying Failure installing updates reverting changes do not power off however its been saying this for 4 hours and i can not get out of this i even attempted to power it off and upon powering it on it comes straight back to this screen!
View 1 Replies
View Related
Mar 4, 2014
I have a Windows 8.1 which I upgraded from my purchased W-8.
Decided to order the Windows 8.1 Media Center Pack. Ordered online and installed.
Got Windows Activation screen saying Windows can't activate right now. Try activating later. If that doesn't work, contact support.
The Current product key is the new one I just received.
Entering my old W-8 key doesn't work.
View 9 Replies
View Related
Jan 2, 2014
I have an HP that I cannot get to activate. I did a clean install and my login is an admin. I deselected installing Norton's during the reset but it was there when I booted up so I removed it with the Norton's removal tool. I tried activating by using the "Windows activation" from the search button and then tried by using an elevated command prompt of "slui.exe 4" but both ways gave me a 0xc0000022 error.
View 5 Replies
View Related
Jul 24, 2014
During update, Windows 8.1 restarts, and goes to the boot screen. Then gives this error: We couldn't complete the updates, Undoing changes. Don't turn off your computer.
All updates that were installed get undone. And if you install updates again, it will do the same thing. The reason is because of one update: IE 11 Windows 8.1 - KB2962872
View 2 Replies
View Related
Sep 11, 2013
I just started getting this error today. It's a Microsoft Office 2013 update error, but I can find nothing by searching for it. I ran the automated update repair tool a couple of times but it did nothing.
Edit: I was able to download the update and install it, but Windows update still tries to install it and fails.
View 4 Replies
View Related
Nov 19, 2013
I have a problem with update. Last night I was connected thrugh VPN to internet and in this mood windows update get some update. now I can't download updates without VPN. I must conneced to vpn then trying to update otherwise I get error 80072EFD.
View 1 Replies
View Related
Sep 15, 2013
I have a Acer Windows 8 computer and its stuck on reverting update changes and restarting. It says "Failed configuring Windows Updates Reverting changes" then restarts and then does that again. I cannot go to the desktop.
View 3 Replies
View Related
Jun 23, 2014
When I search for updates with windows update it finds the drivers I want but it gives me an error message whenever I try to install them.
I already tried downloading the latest windows update (when I install it, it says the update was succesful and asks me to restart, but when I search again after restarting the update shows up again and lets me install it again).
I also tried deleting and renaming my software distribution folder and using the windows troubleshooting program.
Overall I'm not really too fussed about most of the things it's trying to install apart from the drivers for the wireless reciever for my xbox controller as it won't work without them. When I try to install the driver files through device manager it gives me this error message
my main reason for mentioning the windows update problem is that I assume the problems are linked as the wireless reciever works perfectly on my laptop. Up to about a week ago it also worked perfectly on this computer using the same usb port that it uses now.
As you can see, on the 19th, it suddenly began to say "NULL DRIVER". I checked my system restore and it tells me that I installed a windows update on that day just before it suddenly stopped working. I tried reverting back to this restore point (before the update) and nothing had changed, the device still would not work.
View 9 Replies
View Related
Aug 22, 2014
Asus S200E notebook, Win 8 Pro
I recently took in this laptop for my neighbor. The original idea was to scan and clean up the system. I set the laptop up in my office, ran an MSE full scan with no issues. Then ran a full Malwarebytes scan, which returned a few pups, which were removed.
After tending to other matters, I turned back to the laptop to find notification that there was a problem and windows had to restart. I ran another MWB scan only to have the system restart again. This time, the system tried to repair itself with automatic repair. No go. All reboots ended up back at the advanced startup options screen. No ability to restore the system image, no system restore. All I could get to was the cmd prompt.
Googling turned up all sorts of people with this issue (mostly older posts), but very few solutions.
This fix got my system booted again by removing pending update operations.
Apparently, an MS update is the source of the problem. To further reinforce this, until I turned off automatic updating, it would happen again. I also disconnected the machine from my network to revoke its internet access.
So the machine is no longer having start issues, but I'm not sure which update it is. I have 17 pending optional updates, but those haven't installed, so I doubt they're an issue.
I checked update history and there are 29 failed updates. All are dated within the period that the laptop has been in my possession.
I think it would be quit tedious to hide each one individually, only to blue screen, enter the DISM fix, get back into windows and do it all again. How I could identify which update is resulting in the stop error.
To muddy the waters, I've been trying to image the drive via Acronis TI 2014 but can't complete due to 'found disk errors' on C:. Trying to create a system image from within windows halts due to disk errors also, but chkdsk reports no errors (from windows and from cmd).
View 1 Replies
View Related
May 3, 2014
I have installed Windows 8.1 Update 1 Pro Version a few weeks back on my desktop computer running 64 bit version of the OS. The OS was running perfectly fine until today when it started showing activation error. This is not right since I had installed Windows 8.1 Update 1 with a legit key since I have an MSDN subscription As you can see in below pic. It says that you can activate the Windows Machine now
Now I went ahead and tried to activate the windows by the key which I had intially activated and also with a new fresh different key which I haven't any activated windows machine yet. Both the steps didn't yield any fruitful results
1) When I hit "Activate" button
2) When I click "Error Details"
3) When I click "See Support info online" - Nothing happens
I have tried below troubleshooting steps but nothing happened yet
Run sfc/scannow command. This failed at 42%Tried to scan registry and fix the registry by using Advanced System Care 7.2 Pro EditionRefresh the PC. PC was unable to refresh. I had inserted my OS USB DriveTried System Restore to yesterday state. System Restore too failedUninstalled Windows Updates that were installed yesterday.
View 4 Replies
View Related
Apr 14, 2014
I just finished installing Win 8.1 update after 2 hours of troubleshooting.
My new problem is getting crashed every 5 minutes with the blue screen if death and getting error Critical Structure Corruption on my freshly install win 8.1 update.
I was able to get this before it crashed again.
View 1 Replies
View Related
Aug 26, 2014
Windows Update trying to install KB2976627, continually receiving error that I do not have enough disk space remaining to install the update. My OS Drive has 75 GB Remaining.
View 4 Replies
View Related
Aug 18, 2014
So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.
But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it.
I just reinstalled Windows and tried installing the updates again, but same thing. I cannot install any update at all.
View 1 Replies
View Related
Apr 25, 2012
Just installed Win 8 in VMware today.
15 updates installed successfully.
A few hours later, Windows Defender KB2267602, definition 1.125.4350, 59.7 MB update failed to installed.
Error code 8050A003
Found something strange. I opened the View Updates history, and I found out that the update was installed successfully when it was offered the first time. A few hours late, same update was offered again, and this time it failed to install.
View 5 Replies
View Related
Apr 27, 2012
I'm using the Asus Eee Slate EP121. This happened more than once that Windows prompted me to install an update, then fails. Sometimes the update prompt disappears even though it was not installed. Today it prompted me to install an update called "Qualcomm Atheros Communications driver update for Bluetooth Module" and failed.
Error code 80070103.
View 2 Replies
View Related
Jun 10, 2014
I purchased a new ASUS LAPTOP which came with windows 8 installed. When i tried to restart after installing Gtalk i got this message.
"Failure configuring windows updates. reverting changes. do not turn off your computer ".
I got this on last friday i.e the 6th of june, ever since i am not able to do anything with my laptop. I don't have windows 8 dvd as well. How do I reboot it?
Model number : Asus 15634 Laptop Intel Core i3 .
I also tried pressing the power button for 15 secs , still no luck. Tried f8 f9 and windows + r and windows+ X keys no luck.
View 9 Replies
View Related
Jul 28, 2014
I am tired of having to repair Windows updates then get to install one or two then have to go through the whole process again.
Is there a site where updates can be downloaded according to their KB numbers then installed manually?
View 2 Replies
View Related
Oct 24, 2013
Windows Update says it's Downloading Updates. It has said that more than 30 minutes ago. And it's still 0 KB total, 0% complete.
View 6 Replies
View Related
May 11, 2014
I just reinstalled 8 on a ssd and tried to install 8.1 from the store but it says i need to update windows first. I tried running windows update but i get an error saying "Windows could not search for new updates" error code 80240440. I tried everything I could find online and nothing seems to work. I tried restarting windows update, i tried turning off firewall, I tried reinstalling windows again and selecting "check for updates online" before installing from the cd, i tried running a check disk, and there is absolutely no program installed on the drive other than windows.
View 4 Replies
View Related
Mar 13, 2014
I was reviewing my windows updates and saw two optional updates that were pending. First one was for MS office and it went through fine. Second one was some update to AMD vision control center. During that update screen flashed couple of times and went for re-start. After that I am unable to get into the system. I tried safe mode/debugging/low resolution mode etc.. But all resulted in the same blue screen with the 0xc000021a error message.
I am able to go only to command prompt. Nothing else (fortunately I am able to backup my photos by connecting external hard drive and using command prompt). I checked the SRT log file but it doesn't say any issue. All passed.
I tried refresh PC but it came back and said "There was a problem refreshing your PC. No changes made".
I tried using win ISO image bootable flash drive. It couldn't get through me in (I just tried with PC repair option when I booted with ISO image).
Is there a way I can get over it without re-installing?
View 1 Replies
View Related
Feb 4, 2014
My update history does not show any updates after 1/22/14. I know for sure that I have successfully installed at least a few dozen updates since then (almost all of them involving Windows Defender).
View 5 Replies
View Related
Jul 13, 2013
I have a windows 7 home premium retail license and upgraded to windows 8 pro x64 using promotion discount. Now I want to use some 16 bit applications that won't work with windows 8 x64. So I want to install either windows 7 or windows 8 32 bits on another partition along with windows 8 x64. Would it be legal ?
View 7 Replies
View Related
Sep 15, 2014
I set up windows to automatically install updates, and I don't want to change that.
When I'm in a hurry to restart or shutdown my PC and I only see "Shut down installing updates" and "Restart installing updates", is there some way to do it bypassing the update?
I've tried command line: shutdown /s but it doesn't work (it updates before shutting down).
Likewise, Alt+F4 (from the desktop) only offers shutting down or restarting and updating.
Neiter logging out and then choosing to shut down (your only choice is also to update and shutdown/restart).
View 3 Replies
View Related
Jul 15, 2013
I just tried to integrate MSU updates to W8 Install.wim by DISM. I executed (after other commands):
Code:
DISM /image:C:mount /Add-Package /PackagePath:C:MSU
In C:MSU I have:
Code:
96 File(s) 797˙689˙211 bytes
20. 06. 2013 03:08 9˙602˙439 AMD64_ARM_X86-all-windows8-rt-kb2840632-x86_5a2074567fbc6cb4e7339dfb8adbeadfaa58b766.msu
24. 10. 2012 01:35 8˙215˙009 AMD64_IA64_X86-all-windows8-rt-kb2729462-x86_3a6f7896b3481f266299544594f1e7bcbb07701a.msu
[Code] .....
Error: 0x800f082f
Package XXXXXXXXXXXXXX may have failed due to pending updates to servicing components in the image. Try the command again.
dism.jpg
View 5 Replies
View Related
Jan 3, 2014
About couple hours ago I decided to install updates on my Windows 8 desktop. I had about 12 or so. Can't remember which ones now. My update settings are to notify me of the updates but not to install them. So I manually clicked, yes, install. Then after a little while the updates window showed up in red telling me that some updates did not install. So I decided to reboot the desktop to clear it up...
The desktop now hangs up on this very screen: (New windows logo and a spinning thing)
That spinning thing keeps spinning, no matter how long I let it run like this. The HDD light first blinks but then about half a minute in, it stops doing so. I believe that the fan inside spins audibly louder too.
OK, so if I reboot by holding down the power button for a few seconds, it begins rebooting again. For the second time it showed something like "Automatic repair" or something. (I need to say that my solid state drives have Bit locker set up on them.) So after entering the bit locker keys I was presented with an option to do repairs. Since I didn't feel like I needed to do system restore I declined and chose to keep booting into Windows.... again nothing.
So I repeated the process above, but this time it did not offer me to do system restore and instead, it showed something in the tune of "Repair windows". So I chose it, and it then showed this window:
Now I tried it two times already, and no matter what I choose, it hangs up just like I showed on the screenshot above -- with that white border around whatever I choose... How do I get my desktop back?
View 1 Replies
View Related
Jan 17, 2014
I'm constantly trying to update my Windows 8 but I'm unable to do so, because everytime I try to update it, it fails to install because of an errors. To be specific, its two updates with different errors 8007371B and 80073712.
Those two updates are the only one showing up. Their id is KB2856373 (Update for Windows 8 on x64 CPU's) and KB2781197 (Security update for Windows 8 on x64 CPU's).
I have already tried sfc, chkdisk, Windows update diagnostics from Microsoft website, resetting the services, Windows build-in tool to fix Windows update errors and nothing worked.
View 9 Replies
View Related
