I am sitting with a Windows 8.1 notebook that does not allow me to do Windows updates at all. I get an error message that NTVDM CPU has encountered an illegal operation.
I do not want to reload the OS, but need to have this issue resolved asap.
I get this message on startup of Windows 8, before the login screen. Dunno if its from a virus or malware.
[URL]
Clicking OK on that brings up the login screen and I can log into Windows fine. But whether or not i log in or wait at the message, the computer will restart. I get about 2 minutes before it restarts.
[URL]
-I have done a full scan of all partitions with Kaspersky Rescue Disc 10. Found no viruses.
-Have enabled legacy boot menu policy so can boot into safe mode by pressing F8. Message still appears and computer still restarts.
-Unable to Refresh PC, due to drive being locked.
-Unable to Reset PC, due to a required partition is missing.
-I have uninstalled the graphics driver while in safe mode.
-I have done chkdsk, found no errors.
-System Restore Failed.
-Cannot do a sfc scan, due to Windows Resource Protection could not start the repair service. (Running from Windows 8 disc)
I have been having issues with my PC restarting and telling me something along the lines your Windows has encountered a problem and is collecting data and will restart now. So it would seem my install is corrupted in some manner.
So I have tried doing the Windows refresh but I cannot get passed the option of inserting media into drive. I place my Windows 8 64 bit professional CD into my drive and it reads it and just tell me incorrect media.
the last few days a came upon my computer and it was shut down when i restarted the computer
it said the computer encountered an error an shut down
sending info to Microsoft
1- how can i find out what caused the error
2- has others had similar this problem
I decided to check errors in my hard drive and so I used TuneUp Utilities 2014. It has a option to check for errors and recover bad sectors. I choose that option. Rebooted my computer and it is stuck at 19% for about 40 minutes .. I'm wondering if there's any way that I can reboot the computer and cancel this operation and launch windows normally..
View 3 Replies View RelatedI keep getting this error in device manager:
Driver Management has concluded the process to add Service HdAudAddService for Device Instance ID HDAUDIOFUNC_01&VEN_8086&DEV_2806&SUBSYS_80860101&REV_10004&36B8CB0&0&0301 with the following status: 0.
All Audio devices that I use regularly are all working fine I just don't like seeing any kind of error
The device status on main page says: This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
Tried reinstalling drivers but nothing seems to work
I have made myself a member of the local administrators group. I have a script I run on all my WinXP and Win7 machines that connects to my office's VPN. The VPN is a split tunnel, so my script will add the routes to other subnets in my network:
route add 192.168.x.x mask 255.255.255.0 192.168.x.x
As I said, in WinXP and Win7 this works fine, but in Windows 8 I receive this error:
"The requested operation requires elevation"
I don't want the end user to have to right click on the file and 'Run As Administrator' since the script also takes advantage of user specific environment variables such as %appdata%.
One user logs in and all desktop icons have a pinkish "X" on them in the lower left and none of the icon work, AKA, you get an error message when you click on them:
"the operation on (path to file) was started with an invalid parameter"
Nice Windows 8.1. Something new all the time!
My problem is the error restrict operation When I open the software!!As the attached file.
Error talk us : This operation has been cancelled due to restriction in effect on this computer. Please contact your system administrator, while the my system is administrator,second well, it worked more explanation:
1- Software is for apply GO(game online) as CS(counter strike)
2- Example: Change registry(DL file of microsoft) or reset browser and set default program
So,I dont know what to do!?
I shifted to another town and joined uni. Since then my laptop ( dell vostro) is unable to connect to the university's WiFi network. The network icon says connections available, but simply does not display anything on clicking it.
I went to cmd and when I type ipconfig - it says "no operation can be performed while media is disconnected". I have also tried setting up the university's WiFi network manually (using wpa-2 enterprise and aes). It just does not catch it. Also tried deleting all network profiles, setting up manually, restoring windows to a previous point and using cmd (netsh - shows media disconnected; access denied to reset)...
I have checked 100 times to see if airplane mode is off, wireless (radio) is on. There is no switch on vostro to fiddle around..
I purchased a new ASUS LAPTOP which came with windows 8 installed. When i tried to restart after installing Gtalk i got this message.
"Failure configuring windows updates. reverting changes. do not turn off your computer ".
I got this on last friday i.e the 6th of june, ever since i am not able to do anything with my laptop. I don't have windows 8 dvd as well. How do I reboot it?
Model number : Asus 15634 Laptop Intel Core i3 .
I also tried pressing the power button for 15 secs , still no luck. Tried f8 f9 and windows + r and windows+ X keys no luck.
After a BSOD and utter failure to boot (presumably a critical OS file damaged) I ran the recovery tools for a total factory reset.
Connected to the internet and worked for an hour or two, then tried a reboot. Windows update had 104 updates to process. It did them, then "Failure configuring Windows updates. Reverting changes. Do not turn off your computer"
This should take half an hour. After 90 minutes it has rebooted 5 or 6 times. It keeps reverting to the same "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" message. Looks like it might want to reboot through each of those 104 updates.
I'm going to repeat the factory reset and the FIRST thing I will do is disable updates. I'm going to see how long I can work without any updates.
I just reinstalled 8 on a ssd and tried to install 8.1 from the store but it says i need to update windows first. I tried running windows update but i get an error saying "Windows could not search for new updates" error code 80240440. I tried everything I could find online and nothing seems to work. I tried restarting windows update, i tried turning off firewall, I tried reinstalling windows again and selecting "check for updates online" before installing from the cd, i tried running a check disk, and there is absolutely no program installed on the drive other than windows.
View 4 Replies View RelatedWhy are some of the "Important" Windows 8 updates not automatically selected for installation?
View 4 Replies View RelatedI was reviewing my windows updates and saw two optional updates that were pending. First one was for MS office and it went through fine. Second one was some update to AMD vision control center. During that update screen flashed couple of times and went for re-start. After that I am unable to get into the system. I tried safe mode/debugging/low resolution mode etc.. But all resulted in the same blue screen with the 0xc000021a error message.
I am able to go only to command prompt. Nothing else (fortunately I am able to backup my photos by connecting external hard drive and using command prompt). I checked the SRT log file but it doesn't say any issue. All passed.
I tried refresh PC but it came back and said "There was a problem refreshing your PC. No changes made".
I tried using win ISO image bootable flash drive. It couldn't get through me in (I just tried with PC repair option when I booted with ISO image).
Is there a way I can get over it without re-installing?
I am currently having an issue on my laptop at the moment where it's stuck in an infinite loop of 'reverting changes' after having tried to update and failed at 30%, I have done some reading at ways to boot into safe mode however it would appear windows 8 doesn't give me the chance.
I do not have a copy of my original windows 8 disc and am at a loss!
I have tried spamming F4, F8, F10 buttons and none are allowing me to enter boot mode.
After I installed Windows 8 I started having the "0 KB Total, 0% Downloaded" issue while attempting to update, sometimes it does work, but most of the time it doesn't
View 3 Replies View RelatedSo some background. I had issues with being able to install ANYTHING from an MSI file. Then I wasn't able to install any updates from Windows Update. I then reinstalled Windows, and am now facing the same issue after a few days. I would rather not reinstall yet again.
I tried doing System Restore, but it just hangs. Windows Installer hangs on "preparing to install".
I just bought new Asus Vivotab Smart Windows 8 tablet, after the very first windows update it failed to install some of the updates, and then after the reboot I am now stuck with the message "Failure configuring Windows updates, reverting changes".
It never gets any further than this, it never reverts, I have left it running for an entire day and have restarted several times.
This is a tablet, so there is no keyboard so I cannot press any F keys to get into recovery mode, and no CD to boot from etc.
I don't see any option to hide the updates which you don't want to install. In windows 7, one can simply right click and choose hide the update, but no such thing in windows 8.1.
View 6 Replies View RelatedWindows Update says it's Downloading Updates. It has said that more than 30 minutes ago. And it's still 0 KB total, 0% complete.
View 6 Replies View RelatedOn Win 8 (not 8.1) will be first -time user soon - How do i do the updates for Win 8 once new computer is set up and 'running' ? Because it's been sitting on a store shelf i'm sure there are Win. updates required ..not familiar how to find 'that' section inorder to do the updates ! Guess i want to do that before signing onto internet - right ? this will be a whole new world to me - been using XP for eons
PS any other 'hints' as a newby to '8' even if i haven't thought to ask ! PPS: do you recomment i just set options to ''automatic' updates? with XP i know how to find Control Panel to set that but how do i find Control Panel (if that's where i do it ) on Win 8 ... boy am i 'green' !
I have installed the updates for the above, both with automatic updates on and off.
It gets to 15% then fails
How do i get them to configure
Today I installed Windows 8.1 on my notebook. I have 60GB SSD on my notebook so basicly just for windows and some programs (no movies etc. that's all saved on external hard drive). However, when I installed windows, it took wery little space. I still had 44GB free. After updates and installing MS Office, I now have only 22GB free. So I'm wondering, how can some updates and MS office take 22GB of disk space? Is here anything I can do, to get more space on my computer?
View 2 Replies View RelatedI have just upgraded to Windows 8.0, I have been trying to complete the updates that I have just done and each time I restart to complete them, it crashes on 30%.
View 2 Replies View RelatedI recently built my own computer, and have been using it problem free for a while up to now. I realised the lack of computer restarts for updates, and I noticed that I have updates that need to be download. When I tried to download the updates, The progress seemed to stop. Thinking this was normal, I left the download to be. When I came back to it, It said that windows could not install the updates. want to try windows 8.1
View 9 Replies View RelatedI just tried to integrate MSU updates to W8 Install.wim by DISM. I executed (after other commands):
Code:
DISM /image:C:mount /Add-Package /PackagePath:C:MSU
In C:MSU I have:
Code:
96 File(s) 797˙689˙211 bytes
20. 06. 2013 03:08 9˙602˙439 AMD64_ARM_X86-all-windows8-rt-kb2840632-x86_5a2074567fbc6cb4e7339dfb8adbeadfaa58b766.msu
24. 10. 2012 01:35 8˙215˙009 AMD64_IA64_X86-all-windows8-rt-kb2729462-x86_3a6f7896b3481f266299544594f1e7bcbb07701a.msu
[Code] .....
Error: 0x800f082f
Package XXXXXXXXXXXXXX may have failed due to pending updates to servicing components in the image. Try the command again.
dism.jpg
I have had to system restore 3 or 4 times in the last week or so as Windows 8 refuses to boot after installing the latest updates discovered from the last couple of weeks (though some are from December 2012)
I have unchecked all the current updates and have decided against installing them as they seem to be preventing Windows from booting.
Pattern - "Restart to install updates"
Restart locks on the start screen - Restart again and locks again (repeat this process 3x)
"Windows is automatically repairing..." - Fails
"Windows must restore settings to a previous time..." - Usually succeeds, sometimes fails.
Then I can get back into Windows.
As soon as I install these updates, I won't get back into Windows until I system restore since before the updates and my build won't remain stable unless I prevent Windows from installing these updates.What could be going on?
They are quite big updates (totalling ~740mb and have all been discovered in the last week or so though some date back to late last year)
My laptop started installing updates when I powered down for four hours I have had this message on the screen - keep your PC plugged in until this is done. Installing update 17 of 24.....
How long do I leave this or can I power off and try and restart?
So I restored my system because I had no other choice from it not booting before and it was working for a day, then when I restarted it said 'installing XX / 93 updates' so I let that run, and when It finally finished, it restarted said 'configuring windows updates XX% complete...' and then it suddenly said "Failed to configure updates. Reverting Changes." and then it looped this by restarting, trying to configure them, and then saying "Failed to configure updates. Reverting Changes." again...
I've got back into safe mode, what should I do to make it update properly again?
Someone suggested toggling "Secure Boot" in the BIOS, is that worth a try?
I'm constantly trying to update my Windows 8 but I'm unable to do so, because everytime I try to update it, it fails to install because of an errors. To be specific, its two updates with different errors 8007371B and 80073712.
Those two updates are the only one showing up. Their id is KB2856373 (Update for Windows 8 on x64 CPU's) and KB2781197 (Security update for Windows 8 on x64 CPU's).
I have already tried sfc, chkdisk, Windows update diagnostics from Microsoft website, resetting the services, Windows build-in tool to fix Windows update errors and nothing worked.