I decided to check errors in my hard drive and so I used TuneUp Utilities 2014. It has a option to check for errors and recover bad sectors. I choose that option. Rebooted my computer and it is stuck at 19% for about 40 minutes .. I'm wondering if there's any way that I can reboot the computer and cancel this operation and launch windows normally..
View 3 RepliesI am sitting with a Windows 8.1 notebook that does not allow me to do Windows updates at all. I get an error message that NTVDM CPU has encountered an illegal operation.
I do not want to reload the OS, but need to have this issue resolved asap.
I keep getting this error in device manager:
Driver Management has concluded the process to add Service HdAudAddService for Device Instance ID HDAUDIOFUNC_01&VEN_8086&DEV_2806&SUBSYS_80860101&REV_10004&36B8CB0&0&0301 with the following status: 0.
All Audio devices that I use regularly are all working fine I just don't like seeing any kind of error
The device status on main page says: This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
Tried reinstalling drivers but nothing seems to work
I have made myself a member of the local administrators group. I have a script I run on all my WinXP and Win7 machines that connects to my office's VPN. The VPN is a split tunnel, so my script will add the routes to other subnets in my network:
route add 192.168.x.x mask 255.255.255.0 192.168.x.x
As I said, in WinXP and Win7 this works fine, but in Windows 8 I receive this error:
"The requested operation requires elevation"
I don't want the end user to have to right click on the file and 'Run As Administrator' since the script also takes advantage of user specific environment variables such as %appdata%.
One user logs in and all desktop icons have a pinkish "X" on them in the lower left and none of the icon work, AKA, you get an error message when you click on them:
"the operation on (path to file) was started with an invalid parameter"
Nice Windows 8.1. Something new all the time!
My problem is the error restrict operation When I open the software!!As the attached file.
Error talk us : This operation has been cancelled due to restriction in effect on this computer. Please contact your system administrator, while the my system is administrator,second well, it worked more explanation:
1- Software is for apply GO(game online) as CS(counter strike)
2- Example: Change registry(DL file of microsoft) or reset browser and set default program
So,I dont know what to do!?
I shifted to another town and joined uni. Since then my laptop ( dell vostro) is unable to connect to the university's WiFi network. The network icon says connections available, but simply does not display anything on clicking it.
I went to cmd and when I type ipconfig - it says "no operation can be performed while media is disconnected". I have also tried setting up the university's WiFi network manually (using wpa-2 enterprise and aes). It just does not catch it. Also tried deleting all network profiles, setting up manually, restoring windows to a previous point and using cmd (netsh - shows media disconnected; access denied to reset)...
I have checked 100 times to see if airplane mode is off, wireless (radio) is on. There is no switch on vostro to fiddle around..
I just got a refurbished ASUS K75DE laptop, and it came with Windows 8 on it. I am wanting to run a dual boot with Win7, so I disabled fast-boot just fine, and went into the UEFI BIOS and disabled the secure boot.
While I was there, I did like I have always done and set a BIOS boot-up password. I then proceed to boot to my Win7 installer USB Flash drive, but I was running low on battery power so I aborted the install and shut the computer down to try again later.
Now however when I get into BIOS to select boot priority, all options are grayed out except for system time and a few other non-essentials. At the bottom of the first BIOS screen it says "User Level : User" and I can't seem to find a way to reverse this issue. So now I'm stuck, can't boot to anything but the HDD because it is first by default.
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
Client computer that shows black screen with text at boot up. Cannot boot into Windows 8 (8.1?)
This is what is on the black screen;
Your PC needs to restat.
Please hold down your power button.
Error Code 0x0000012a
Parameters:
0x0000000000000001
0x0000000000000046
0x0000000000000000
0x0000000000000000
After re-boot a message shows
Prepairing Auto Repair
Diagnosing PC
PC Did Not Start correctly either with 2 options - Restart and trying any of the Advanced Options
Restart option did nothing but restart this cycle of BSOD, etc. Advanced options to troubleshoot (Refresh, Reset, System Repair, Command Prompt are not available due to the following message:" You need to sign in as an administrator to continue, but there aren't any administrator accounts on this PC"
No system recovery disks or Windows 8 Installation media available.
PS :Cannot boot into Windows 8
Windows 8.1 failing to boot when any usb storage drive is plugged in during boot. My only solution is to unplug everything each boot unless I use my KVM switch which does not support usb 3.0.
View 2 Replies View RelatedMy Dell Inspiron 660 is 2 months old. It came with Windows 8 preinstalled. My problem: I am trying to change the boot order so I can boot from CD ROM as a first option. I have tried using the "F" keys on boot, but it just ignores me and goes on to boot up. I have also tried the "Advanced Options > UEFI Firmware Settings" in "Change PC Settings" and got the same results. I spent some time on the phone with a Dell tech. After trying all the things I had already tried, he and his supervisor decided I must have a bad Motherboard. Does this sound right? Is there any way to repair this problem?
View 9 Replies View RelatedI recently felt the urge to experiment with Linux and installed Ubuntu Mint and tried to set up dual booting.
However I seem to have only suceeded in preventing Windows booting at all. I cannot get into the recovery drive to undo my wrong doing.
How can I reset the windows boot manager without access to windows or recovery partitions?
.I have an HP Pavilion Slimline PC desktop. It does not allow me to boot from CD/DVD drive or USB connection. Windows 8.1. I wish to be able to use the boot options cd/dvd and all the USB options. I can't use any of the options. I list bios setup options and suggestions given to me from articles but I'm not sure I'm afraid of error. I don't have that much experience in bios setup.
Articles have said in BIOS setup Security is to be disabled. I suppose Legacy remains disabled(?). It is suggested that I shutdown and reboot.
BIOS Setup > Storage > Boot Order has this list:
UEFI Boot Sources
Windows Boot Manager
USB Floppy/CD[code]....
At bottom of this Boot Order Window are the options: F5=disable Enter=drag F10=accept ESC=cancel
Windows Boot Manager at the the top stops all other options.beneath it. How does that 'drag' work. Don'tr I have to move 'Windows Boot Manager' to the bottom?
And move ATAPI CD/DVD drive to the top? of this UEFI boot sources list?
Is it true that if there is an error in the BIOS Boot Setup and Windows 8.1 does not boot, the BIOS Setup will come up instead so one can do a fix?
I had an issue with my Windows 8 where I was forced to reinstall it. I have completely wiped my SSD and reinstalled Windows 8 on it. However, now it will not let me pick my boot order. It is forcing me to use Windows Boot Manager as my Boot Option 1. If I use anything else, I just get a black screen with a blinking line cursor.
It didn't use to do this before I had to reinstall. I'm not sure how to fix this. It also will not let me choose F11 boot options, it always is forcing me to use Windows Boot Manager.
How do I make it so I can boot from whichever boot order I want, instead of using Boot Manager?
I have Kubuntu 13.10 and Windows 8.1 installed on separate drives on my computer. Dual-booting through the Linux bootloader works fine, as in I can boot either Windows 8.1 or Linux without incident. However, whenever I boot Windows, it resets itself to the highest boot priority, and always re-adds a boot entry if I remove it. My question is, how can I get it to stop doing this? I can temporarily fix it through Linux, but I'd really like to stop it permanently, as it's starting to become a pain.
EDIT: It turns out my problem was related to a duplicate entry for Ubuntu. If you're having this problem and have tried to install Linux a couple of times, check to make sure that you only have one entry for it.
I have a Dell Inspiron 17, 5000 Series (1.7 GHz Intel Pentium 3558U, 4 GB Ram, 500 GB HDD). It came preloaded with Windows 8.1. I needed Windows 7 so I partitioned the main drive and installed Windows 7 in 100 GB of partitioned space. After swapping between the Windows 7 and 8 Boot manager. Ended up choosing the Windows 8 manager.
My problem comes in when I boot into Windows 7, then when I shut down and try and boot into Windows 8 it will hang prior to the boot manager (of Windows 8). I have to press and hold the power button to hard shut down. Once I do that and reboot, Windows 8 Boot manager and Windows 8 boot ok.
So Windows 8 will boot fine if I was last in Windows 8. However if I was last booted in Windows 7 then go to Windows 8 (or try and boot into 7 again, but using the 8 boot manager) it will hang at boot. I've used all the command checks with Windows 7 and 8. Found no errors. I can't reinstall Windows 8 as I don't have recovery disks, plus the computer came from Aarons Rent to Own (they had no issues me doing what I wish with it).
When I switch and use the Windows 7 boot manager I can boot back into Windows 7 even if Windows 7 was my last boot. But like when using the Windows 8 boot manager, I am unable to boot into Windows 8 if Windows 7 was booted last. But Can boot to Windows 8 if Windows 8 was booted last.
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
Can I (correctly) convert my current 8.1 (retail) into VHDX and boot from it using the same 8.1 boot loader or not?
I honestly don't know if I would be running two instances. Would it work if I deleted the C:/ partition and booted the VHD from another disk or partition? Would that be OK? Seems to me it would be two instances but I don't know.
I'm not interested in VMware or VirtualBox - just Hyper-V or some similar bare metal solution. Hyper-V server I could not make work really - it is not what it is designed for - I want wifi, bluetooth etc. Windows server would work but I can not afford it.
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
View 3 Replies View RelatedLate last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
Earlier, about an hour ago, I left to go job searching, and left my computer in hibernate mode so I could bring it back up as soon as I got back. When I tapped keys on the keyboard, the computer powered up as usual, but it brought up the BSoD, stating it was missing files.
Prior to receiving this error, everything was working fine. I even set it to hibernate mode during the night, and it powered on this morning without any problems. I dunno if it's the multimedia keyboard I'm using or what that caused it.
I don't have an installation disc (since I bought it from Fry's Electronics about a year ago with 8 pre-installed), and neither do I have a recovery disc (since I didn't know how to make one.
Computer info: Windows 8 x64
Manufacturer: ASUS
how to fix the missing boot files, and how to do it without causing any data loss from either of my hard drives.
I formatted a HD that had the bootmanager on it. The Win 8 disc can't repair it. I'm also getting a message that my C: drive is locked.
View 6 Replies View RelatedI had windows 7 running on my computer. When windows 8 came out I used a second harddrive as the windows 8 installation drive. Windows 8 automatically setup a dual boot system where every time I started the computer it took me a windows screen where I could select either windows 7 or windows 8. This has been going on since Windows 8 was released.
I decided it was getting old so I decided it was time to remove the old windows 7 harddrive. I tried doing it inside the windows 8 dual boot screen but could not find an option. So I decided to reformat the windows 7 harddrive. I did this in command prompt mode. After doing so when my computer restarted it said it could not find any harddrive to boot. Windows 8 is installed on the other harddrive, the one that was not reformatted. So how do I get it to start using that harddrive as the boot drive? I checked my bios and even physically disconnected the old HD that had windows 7 on it, but none of that seemed to work even though the Windows 8 HD is definitely in the boot order in the bios.
My PC takes its sweet time to boot given the specs it has. (around 1.75 mins) Especially the "black" part seems to take so long. I've fastboot enabled and I use UEFI. how to make the PC boot faster ?
View 9 Replies View RelatedI just bought a lenovo laptop, which came with preinstalled Windows 8.
When I turn it on the first thing I see is:
EFI network 0 for IPv4 (20-89-84-23-c3-45) boot failed
Checking media (Fail)
EFI network 0 for IPv6 (20-89-84-23-c3-45) boot failed
And then a blue screen:
Default Boot Device Missing or boot failed
Insert recovery media and hit any key
Then select boot manager to choose a new boot device or to boot recovery media
I am dual booting Windows 8 and win7. I actually have Windows 8 installed on its own hard drive and win 7 installed in its own hard drive. The win7 hard drive has been in use for the past 2 years and I have had Windows 8 running for about a week now. I purchased another hard drive for Windows 8 and left the old Win7 as it was.
I also have 3 other hard drives in the system. Everything is formatted NTFS.
So my system is as follows
Drive C - Boot Drive - I physically swap out the dedicated hard drive for Win 8 or Win 7
Drive D - internal 250 GB sata drive
Drive F - internal 250 GB sata drive
Drive H - internal 250 GB hard drive.
I have been running this config for about 2 years under Win7 with no problems.
The problem that I have now is when I swap the boot drive and boot up a different OS than last time (Like booting Windows 8, powering down system, swap boot drive, boot Win7) the system always says that there are problems on the 3 non-boot drives. It runs chkdsk(it least that is what it look like) and processes the 3 non boot disks one at a time which take about 10-12 minutes for all 3. Most of the time it finds no problems, but about 1 out of 5 boots will find a problem with one of the disks and then fixes it. The disks seem to be OK while I am running. I then power down and swap boot drive and reboot the other os and we start all over again. I am powering the system completely down for each reboot to make sure that the disk cache is flushed.So far the disk problems have been fixed by chkdsk at boot, but I am sure the day will come when the disk cannot be fixed and I will loose data.
I'm running Win 8 Pro which is installed on my SSD and I need to remove my secondary drive and connect it to another PC. When I do this, I get a boot error. Why an error shows up especially when it is not a boot drive.
Error and My Disk Management information is attached as an image to this message.
C: is the SSD and K: is my PATA drive which I want to move.
Last night my computer died. Bought it a few months ago and now it's not working.
The problem I got was Exiting PXE Boot ROM. I found these suggestions and followed these instructions: Message during startup: Exiting PXE Boot ROM. However, after changing from ACHI to IDE, my computer now won't start at all.
It doesn't even boot up to the boot screen.
I'm trying to boot Windows 8.1 from DVD (for Nero backitup.) . I can get to the advanced settings option and even to the UEFI option. Once I get tothe UEFI restart the computer shuts down and then just sits there - power light on - but nothing on the screen. The screen stays asleep(?) if that is what you would call it.
I'm on an Acer Aspire AT3-605_ES20 desktop. They had an instruction to hit "delete" at the Aspire logo during boot. But I don't get an Aspire logo - it just starts up to the Windows log in screen. I turned off "fast startup". How I can change my boot order so I can boot from DVD?
I installed windows 8 from a bootable partition containing the files, after the installation I get an screen to boot the OS or the windows 8 installation, I checked the boot manager and this is what I have :
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=DeviceHarddiskVolume6
description Windows Boot Manager[code].....
What i want is to boot normally, without having the multiple boot screen, the partition where my windows 8 installation files are, is SET as active. I just want everything(bcdedit) to look as if I installed windows 8 from a cd-rom.