Setup Installation :: Windows 8 Installer Opens Up 2 Tabs In Browser
Apr 27, 2014
When I get to the part in the Windows 8 installer that it tells me what needs to come to my attention, instead of opening a little browser inside of the program as I guess it's trying to do, it opens up 2 tabs in whatever browser is my default. This would be fine if the buttons in the web pages still modified the actual installer, but they don't and therefore the installer is effectively stopped.
I'm trying to upgrade from Windows 7 to Windows 8. Key word: Upgrade. I would like to avoid re-installing the OS altogether, but I can do that by myself if it comes to that.
Here's what it looks like:
I read on another thread that making IE the default would fix it, but I tried that and it did not work.
It happened when i downloaded nhancer from cent.com the malware came with it and after using malware bytes and hitman pro to clean the pc still i get the ads i don't know what to do next.
After entering a valid retail key into the installer located here I get the following error:
I have tried running the installer on another computer with the same results. I have also tried the netsh command and deleting the Panther folder. The problem arised after doing the trick to download 8.1 with a 8 product key and cancelling the 8.1 installer. It was working yesterday and this morning.
I installed Windows 8/8.1 on a system with a Gigabyte GA-Z77X-UD5H MB. When I look at the SSD where Windows is installed I have one partition. I also installed Windows 8/8.1 on an ASRock Z77 OC Formula MB. When I look at the SSD where Windows is installed I have three partitions - 300MB (Recovery Partition), 100MB (EFI System Partition) and 111.27GB (Boot,....Partition). Why did the Windows 8 installer create three partitions on the ASRock system? I think I understand the EFI partition since the ASRock BIOS has a "Load UEFI Defaults" option. The Gigabyte MB does not have this option in the BIOS? Is that because the ASRock MB has truly implemented EFI and uses the EFI System Partition to store boot information?
Why was the Recovery Partition created? I built this system from scratch so there is not any third party involvement. If I reinstall Windows 8 using a new - never used SSD will I get the three partitions? If I format the SSD with one partition prior to Installing Windows 8 what will I get?
I not concerned about the loss of 300MB,why I got different partition configurations on fresh installs of Windows 8 on two different MB's/Systems?
My PC is a dual boot system which had Win XP on disk1 and Win 7 on disk2.
When I installed Windows 8 several months ago, I chose to install it on disk1 and completely remove Win XP.
Everything works fine but my log-in screen now contains 4 start-up tabs instead of just 2 (see below):
Windows 8 Windows XP Windows 7 (volume 1) Windows 7
The only tabs which are valid are Windows 8 and Windows 7 (volume 1), the other 2 are non functional. How can I edit this screen and remove these tabs?
For some reason, Windows 8.1. downloader package refuses to see my 8GB SanDisk flash drive as a target for creating bootable Windows 8.1 installer USB media. A 16GB Patriot drive is detected and processed properly, but 8GB SanDisk is ignored. The same is true for the Windows 7 USB/DVD tool.
What could be causing this?
When I create the media on the 16GB drive, only 3+GB is used, which means that 8GB drive should be sufficiently large.
UPDATE: It appears that the SanDisk drive is not detected as "removable", so neither Windows 8 downloader nor Windows 7 USB/DVD tool see it as a valid target. There are quite a few reports of that issue on the Net. So, how do I create a bootable Windows 8.1 install media from that SanDisk drive?
Only just noticed this but have confirmed other PC's exhibit this same behaviour. The tabs on the top line of the browser don't match the order of the preview tabs at the bottom. As you open other sites and open and close tabs sometimes they do manage to line up and sometimes not....
I want to scroll through tabs on internet browser with right hand mouse alone
I don't want to discuss the specifics why but basically I don't want to use my left hand at all sometimes during certain web browsing sessions.
How do I browse through internet web browser tabs with just right hand mouse? Without having to click on each tab. I just want to use either a button, scroll wheel, or an extension/add on that will make scrolling through tabs only right handed.
I installed windows 8 and JDK 7 without problems but when i go to install the android SDK tools the installer says to me that can't find Java SE Development Kit.
I downloaded the right version of JDK. Simply the SDK installer can't find C:windowssystem32java.exe when in fact the file is in that folder.
I go to set an environment variable Java_home that point to Java.exe but does not work.
This maybe fall under customization but here goes. I'd like to be able to set default tabs for when i open task manager in windows 8. when i open task manager, default is process and i'd like to change that to details. I almost don't use process and I always find myself jumping to details and services, is there anyway to do this?
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
i installed a game using iso file, it worked fine.after getting a setting problem in my game i did the recovery of 2 days before then obviously i'll have install that game again but when was trying to install the game installer was not not proceeding.
I love how Metro IE11 works now in Windows 8.1. I was using a reddit app, opened an article, and it spawn a separate window for the IE browser to read a link. Works great. But one day, when it launched the IE browser, I was hearing a video that was completely unrelated to the link.
So I bring up the tabs and I had like 50 tabs open! When I close the IE browser that spawns from reddit or from a newsreader like News Bento, I just drag the app to the bottom of the screen to put away IE. That didn't terminate the tabs. So it was tedious to close each tab independently.
I've got a tablet that runs Windows 8 pro. When the keyboard is up it takes up half of the screen, making is difficult to see whatever it is I'm working in and I can't figure out how to re-size it.
I'm also trying to re-size the tabs in Microsoft Excel. I know how to do this in Window 7 but I can't find the proper place with in the control panel in windows 8 to do it.
After installing Windows 8 in most cases you have to install .Net Framework 3.5 to be able to install or run some 3rd party application. Recently while browsing the internet I came across an offline installer; one that worked perfectly and was very easy to use.
[URL]
Download Microsoft .NET Framework 3.5 Offline Installer for Windows 8 Or .NET Framework 3.5 Offline Installer for Win8
After last week' update I started seeing a lot of "The start type of the Windows Modules Installer service was changed from auto start to demand start." Even ID 7040 in my system event log.
It triggers when laptop is idle (win 8 pro 64 bit), the CPU usage goes to 30% and higher and the event log gets pounded with the above messages.
Okay so i have a windows 8 and some tabs won't open sorta, they open but when i click on them they won't show up on the screen or anything, i've tried restarting the computer and sometimes even redownloading the programs and still nothing. The tabs are faded out like their opened but clicking on them does nothing, whats wrong with my computer??
Since a few weeks for some reason I cannot access some programs (like MS Word), it just says that "the operating system is not presently configured to run this application". It doesn't show up as a registry item either same as some other programs.
Now my problem is that I cannot install a new version, nor openoffice, or anything else for that matter that uses windows installer.
I've checked if the service and subservice was running and they were, I've tried SFC /scannow and Dism /Online /Cleanup-Image /RestoreHealth but they both didn't fix the problem ( did fix some corruptions though).
What happens with the installer is basically it doesn't do anything. It just sits at initializing forever and doesn't install anything at all. Currently cannot install any programs but don't want to reinstall windows since I have a lot of programs and settings I don't want to lose.
I have been happily using Windows 8, until today. Out of nowhere I cannot install/update anything (I always get "windows installer has stopped working error", I cannot run any metro apps (they simply crash), and windows itself seems unstable. Is there any other solution, other than formatting harddrive and re-installing everything?
Firefox 26.0 64 bit windows installer link? The portable runs fine but it's too much hassle to set as default. Any clean link to FF installer? (Not Pale Moon or Waterfox but the Firefox 26.0 x64)
All I can find is the 26.0 Portable link on Softpedia.
My problem is since updating to 8.1, whenever I fire up IE11 on desktop mode a Windows Installer box shows in the middle of the screen saying "preparing to install" and the box continually flashes and the webpage will not load. Why this happens! IE works fine in metro mode and I cannot find any logs in Event Viewer with regards to this problem.
have been using AMD Drivers 13.4, recently tried the new 13.8 Beta drivers, but Catalyst only showed tabs for CPU settings, nothing for Graphics Cards, have tried a clean install and a overwrite of the software, but still comes up the same, have finally got back to using the 13.4 Drivers but only after a lot of hassle.
When I download software onto my Windows 8, often there is an .msi file to install the application. When I double-click on the .msi file, I get an error "Error while Opening File". This occurs on various software packages, so is just not a bad download.
When I click "OK" to this error message, I get a big green button on the screen, with "Download" in big letters, and "ilivid" in smaller characters.
I did mistakingly download the ilivid app onto my PC (once again a big green button on a download site that I thought was the download link to the file I wanted, however I uninstalled it once I read some articles online about it, also ran Malwarebytes to check for malware.
Do I need to re-associate the .msi files with the Windows Installer?
This new sync tab feature in IE11 is handy. But it's also a bit annoying. I have about 7 or 8 PCs I use frequently and I re-install the OS all the time. So I end up with orphan machines that appear in IE 11 sync tabs and I can't seem to find a way to remove them. I also noticed that these tabs mysteriously disappeared on some of my machines.
For my touchpad I use an unofficial driver (higher version and more tuned than official), which works nicely.
However it also installs some add-on to Control Pane lMouse, which causes about 1 minute delay (of waiting for Mouse window to appear), when I try to run Control Panel Mouse icon (for mouse pointers and acceleration). That add-on is probably new custom tab, however it don't show up, so I don't know. It is probably some DLL loaded at start maybe via Task Scheduler, maybe via system service. (I have already checked more common autoruns - both StartUp folders and also Run registry keys.)
I want to keep the driver, but remove that add-on, what causes delay (by identifying the file and renaming it). What is the best procedure to identify the add-on?
The "Reopen last browsing session" is greyed out and staying greyed out in IE10. Is there a download fix that one can get or is there another way to fix this thrilling problem.
With Nero 2014 I was forced to install it in safe mode (I got strange error "1158" otherwise). However when the installation reached MSI files, it was unable to continue.
This REG file below enables MSI installer in Safe Mode and Safe Mode with Networking.
Reboot is required after REG is imported:
Code: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBootMinimalmsiserver] @="Service" [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBootNetworkmsiserver] @="Service"
I have a windows 8 desktop computer with 2 monitors attached. I can span the desk top across both screens. I use this for document editing, picture file, etc. No gaming. When I span a program across the 2 screens (say Xn View for my pictures) if a dialogue window comes up (say to save a picture), it usually comes up right in the middle of the desktop which is where the two screens meet. This makes it a little difficult to read and I end up dragging it to one side.
Can I change where these dialogue windows come up? I really don't care which monitor they are centered on, just as long as they don't span the middle where the screens come together.
