Cannot Run .msi File (installer)
Dec 25, 2013
When I download software onto my Windows 8, often there is an .msi file to install the application. When I double-click on the .msi file, I get an error "Error while Opening File". This occurs on various software packages, so is just not a bad download.
When I click "OK" to this error message, I get a big green button on the screen, with "Download" in big letters, and "ilivid" in smaller characters.
I did mistakingly download the ilivid app onto my PC (once again a big green button on a download site that I thought was the download link to the file I wanted, however I uninstalled it once I read some articles online about it, also ran Malwarebytes to check for malware.
Do I need to re-associate the .msi files with the Windows Installer?
View 8 Replies
ADVERTISEMENT
Aug 31, 2012
I installed windows 8 and JDK 7 without problems but when i go to install the android SDK tools the installer says to me that can't find Java SE Development Kit.
I downloaded the right version of JDK. Simply the SDK installer can't find C:windowssystem32java.exe when in fact the file is in that folder.
I go to set an environment variable Java_home that point to Java.exe but does not work.
View 6 Replies
View Related
Jan 3, 2014
i installed a game using iso file, it worked fine.after getting a setting problem in my game i did the recovery of 2 days before then obviously i'll have install that game again but when was trying to install the game installer was not not proceeding.
View 1 Replies
View Related
Sep 20, 2013
With Nero 2014 I was forced to install it in safe mode (I got strange error "1158" otherwise). However when the installation reached MSI files, it was unable to continue.
This REG file below enables MSI installer in Safe Mode and Safe Mode with Networking.
Reboot is required after REG is imported:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBootMinimalmsiserver]
@="Service"
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBootNetworkmsiserver]
@="Service"
View 9 Replies
View Related
Aug 6, 2014
I'm on Windows 8 x64.
Are the files on C:WindowsInstaller needed or they can be removed ?
If yes then how to safely remove them?
View 5 Replies
View Related
Apr 11, 2013
After installing Windows 8 in most cases you have to install .Net Framework 3.5 to be able to install or run some 3rd party application. Recently while browsing the internet I came across an offline installer; one that worked perfectly and was very easy to use.
[URL]
Download Microsoft .NET Framework 3.5 Offline Installer for Windows 8
Or
.NET Framework 3.5 Offline Installer for Win8
View 6 Replies
View Related
Jul 10, 2013
So today, I installed Comodo internet security and Firewall. It's all installed and working, but upon startup I get this error
"NSIS Error
Error launching installer"
View 9 Replies
View Related
Jun 17, 2013
After last week' update I started seeing a lot of "The start type of the Windows Modules Installer service was changed from auto start to demand start." Even ID 7040 in my system event log.
It triggers when laptop is idle (win 8 pro 64 bit), the CPU usage goes to 30% and higher and the event log gets pounded with the above messages.
View 7 Replies
View Related
Aug 26, 2013
I have followed the instructions from the Windows 7 forum on changing the owner/permissions for a file from Trusted Installer to Administrator but cannot see an EDIT button. I am trying to delete files associated with the Delta Search malware which was detected and deactivated by Malwarebytes.
View 2 Replies
View Related
Jan 8, 2014
I recently purchased Knights of the Old Republic 1 & 2 (2 disk set). I have the first one installed but I get the error message- "Error decompressing data. Corrupted installer?" when I get to models.bif during the installation. I am currently using windows 8 (obviously) but the recommended specs for the games say windows 7. I do not know if this would effect the installation, if so is there a way for me to get windows 7?
View 1 Replies
View Related
Mar 23, 2014
Since a few weeks for some reason I cannot access some programs (like MS Word), it just says that "the operating system is not presently configured to run this application". It doesn't show up as a registry item either same as some other programs.
Now my problem is that I cannot install a new version, nor openoffice, or anything else for that matter that uses windows installer.
I've checked if the service and subservice was running and they were, I've tried SFC /scannow and Dism /Online /Cleanup-Image /RestoreHealth but they both didn't fix the problem ( did fix some corruptions though).
What happens with the installer is basically it doesn't do anything. It just sits at initializing forever and doesn't install anything at all. Currently cannot install any programs but don't want to reinstall windows since I have a lot of programs and settings I don't want to lose.
View 1 Replies
View Related
Nov 9, 2012
I have been happily using Windows 8, until today. Out of nowhere I cannot install/update anything (I always get "windows installer has stopped working error", I cannot run any metro apps (they simply crash), and windows itself seems unstable. Is there any other solution, other than formatting harddrive and re-installing everything?
View 3 Replies
View Related
Dec 26, 2013
Firefox 26.0 64 bit windows installer link? The portable runs fine but it's too much hassle to set as default. Any clean link to FF installer? (Not Pale Moon or Waterfox but the Firefox 26.0 x64)
All I can find is the 26.0 Portable link on Softpedia.
View 4 Replies
View Related
Nov 5, 2013
My problem is since updating to 8.1, whenever I fire up IE11 on desktop mode a Windows Installer box shows in the middle of the screen saying "preparing to install" and the box continually flashes and the webpage will not load. Why this happens! IE works fine in metro mode and I cannot find any logs in Event Viewer with regards to this problem.
PC is a Dell XPS8500, seven months old.
View 9 Replies
View Related
May 17, 2014
After entering a valid retail key into the installer located here I get the following error:
I have tried running the installer on another computer with the same results. I have also tried the netsh command and deleting the Panther folder. The problem arised after doing the trick to download 8.1 with a 8 product key and cancelling the 8.1 installer. It was working yesterday and this morning.
View 9 Replies
View Related
May 4, 2013
I have had installer failure for Hp printer software and windows live mail even though signed in as administrator and running the programs as administrator; the failure is the same for both, that is " failure due to lack of privileges to write to C:program dataMicrosoft windowsstart menu".
I have gone to the files and changed permission from read only several times and had it change right back to read only as soon as I closed explorer.
I have gone into uac and disabled notification but it has no effects, and Windows 8 apps still seem to work anyway' so I reset uac to normal level again.
This all seemed to start after a win update, but doing a system restore has not worked either.
View 9 Replies
View Related
Apr 27, 2014
When I get to the part in the Windows 8 installer that it tells me what needs to come to my attention, instead of opening a little browser inside of the program as I guess it's trying to do, it opens up 2 tabs in whatever browser is my default. This would be fine if the buttons in the web pages still modified the actual installer, but they don't and therefore the installer is effectively stopped.
I'm trying to upgrade from Windows 7 to Windows 8. Key word: Upgrade. I would like to avoid re-installing the OS altogether, but I can do that by myself if it comes to that.
Here's what it looks like:
I read on another thread that making IE the default would fix it, but I tried that and it did not work.
View 3 Replies
View Related
Jan 8, 2014
I installed Windows 8/8.1 on a system with a Gigabyte GA-Z77X-UD5H MB. When I look at the SSD where Windows is installed I have one partition. I also installed Windows 8/8.1 on an ASRock Z77 OC Formula MB. When I look at the SSD where Windows is installed I have three partitions - 300MB (Recovery Partition), 100MB (EFI System Partition) and 111.27GB (Boot,....Partition). Why did the Windows 8 installer create three partitions on the ASRock system? I think I understand the EFI partition since the ASRock BIOS has a "Load UEFI Defaults" option. The Gigabyte MB does not have this option in the BIOS? Is that because the ASRock MB has truly implemented EFI and uses the EFI System Partition to store boot information?
Why was the Recovery Partition created? I built this system from scratch so there is not any third party involvement. If I reinstall Windows 8 using a new - never used SSD will I get the three partitions? If I format the SSD with one partition prior to Installing Windows 8 what will I get?
I not concerned about the loss of 300MB,why I got different partition configurations on fresh installs of Windows 8 on two different MB's/Systems?
View 9 Replies
View Related
Feb 28, 2014
For some reason, Windows 8.1. downloader package refuses to see my 8GB SanDisk flash drive as a target for creating bootable Windows 8.1 installer USB media. A 16GB Patriot drive is detected and processed properly, but 8GB SanDisk is ignored. The same is true for the Windows 7 USB/DVD tool.
What could be causing this?
When I create the media on the 16GB drive, only 3+GB is used, which means that 8GB drive should be sufficiently large.
UPDATE: It appears that the SanDisk drive is not detected as "removable", so neither Windows 8 downloader nor Windows 7 USB/DVD tool see it as a valid target. There are quite a few reports of that issue on the Net. So, how do I create a bootable Windows 8.1 install media from that SanDisk drive?
View 6 Replies
View Related
Mar 7, 2014
I have download all update related with windows 8.1 but all of them in .cab file format
Can I customize windows 8.1 installer and add this update into them?
So I can re-install windows 8.1 with all update file?
View 9 Replies
View Related
May 29, 2014
The attrib +s +h command that is used to make a file a system and hidden file is no longer working. When i try to use the command on a folder, the folder just shows up as a normal hidden folder which can be easily viewed using show hidden items in view option. It looks as if every system file is not recognizing itself as a system file.
Also every folder in my system has appeared a desktop.ini and thumbs.db folder.
I am running Windows 8- 64 bit
View 1 Replies
View Related
Feb 3, 2014
How to make the 'Libraries' folder structure appear when doing a file open file save. In both case I can see the folders labeled Desktop, Documents, Downloads, etc. but I cannot see the Libraries folder.
Is this possible? How?
View 10 Replies
View Related
Feb 9, 2013
I don't know how I did it but I got both Windows 7 File Recovery and Windows 8 File History active at the same time. I upgraded from Win 7 to 8 Pro and transferred settings so win 7 file recovery was already active, when I tried to turn on win 8 file recovery I got a message saying I cant because win 7 FR was active. So I deactivated win 7 FR then activated win 8 FR, for giggles I went back and turned on win 7 FR and it worked. Now I have both active, from what I have read this was not possible. Did I break my OS or am I just lucky?
View 3 Replies
View Related
Oct 30, 2013
In Windows 8.0 File History, it had the nasty habit of duplicating your library files on your backup ( in my case, my external USB backup drive ( Replica 2 Terabyte ). By DUPLICATING, I mean they get copied over and over and over again... This happens to ALL of them, even though you have not touched the majority of them for YEARS. (File History is suppose to copy them over the FIRST time, then copy a new copy with a new name (old name plus date) if you edit the file in any way). I turned of file indexing on ALL my drives, except my C: drive, to see if that would stop it ( this is recommended in many threads on other sites ).
View 1 Replies
View Related
Dec 29, 2012
When in file explorer the zip icon under the share tab is not active. When I click on a simple folder, it does not highlight. If I right click on the folder and go to send to all I get is the dvd drive unless I shift right click first then a drop down of more selections appear but not send to compress. Is this something that need to be activated. I can un-zip a fle from the view tab.
View 4 Replies
View Related
Jun 3, 2013
I have an issue running a program that is contained in a self extracting zip that is supposed to run automatically.
The SFX files unzips the contents to a folder on my hard disk (no problem), but then tries to run another program (installer.exe) that is located in the extracted folder.
The program fromm inside the SFX runs fine if I set the compatibility to XP manually, but the problem is that the the SFX extracts the files to a different location each time it is run.
Is there a global way to make a program (installer.exe) run in compatibility mode wherever it exists?
View 4 Replies
View Related
Dec 20, 2013
I have been trying to add a .exe file to my Startup files. But for some reason the file does not run at the start up.Take a look at the screenshot to see the setup. cW8oETE.png
The paths which I did use are:
C:UsersDyonAppDataRoamingMicrosoftWindowsSt art MenuProgramsStartup
C:ProgramDataMicrosoftWindowsStart MenuProgramsStartup
Is there another way to add files to the Windows 8.1 Startup files? I have done some research on Google but did not find anything.I have also tried adding a key to the register which did not work either.For the registery I have used both using the direct .exe and the .lnk file. wYMGhdU.png
View 4 Replies
View Related
Dec 18, 2012
I tried searching it on Google but didn't find anything, the backup file created in XP and Win7 is saved with .bkf file extension,
I want to know the same for the file history in Windows 8, what's the extension or the files are simply saved in the same directory structure with same file extensions as originals,
View 3 Replies
View Related
May 14, 2014
Turned the PC on this morning and all my files (audio , picture and video) now have the file type at the end of the file name so instead of cars42 it reads cars42.mpg same for all other file types, Why?
Also, had 2 new desktop icons "Desktop.ini" which open in wordpad as some directory log. But now every folder now contains a desktop.ini file some have thumbs.db file. Also, "This PC" has several device driver icons appeared which are empty but ask for a disc to be inserted, they read ie: CF/MD (E and SM/xD (F, aswell as a G: and H: ...
I have not changed any file specs, it just appeared today. I have many thousand files and need them to be short for work, i don't want the added .mpg,.jpg, .mp3 etc added. Do i just system restore? How did this all happen though, Was it an update? Also, Another seperate issue my PC takes several minutes to shut down though this has happened for most of the time i've had this PC which is only 3 months.
Using Windows 8.1 on XPS 8700, how do i solve it? how to prevent it?
View 5 Replies
View Related
Aug 1, 2014
Is it possible to sort a folder's contents with both File names and Sub-Folder names intermixed? I have projects in sub-folders, and 'support' files like this:
projabc (sub-folder)
projabc.txt (file)
projabc.bat (file)
amongst other projects. I would like all the 'projabc...' items to appear together.
View 1 Replies
View Related
May 29, 2014
Windows could not start the Audio Service, 0x800706cc
I googled up the error that I am facing and found a website, where some guy uploaded a "script" file, which seems to fix the problem that I am facing. I downloaded the file, but I don't know how to execute it.
View 3 Replies
View Related
