i installed a game using iso file, it worked fine.after getting a setting problem in my game i did the recovery of 2 days before then obviously i'll have install that game again but when was trying to install the game installer was not not proceeding.
View 1 RepliesSince a few weeks for some reason I cannot access some programs (like MS Word), it just says that "the operating system is not presently configured to run this application". It doesn't show up as a registry item either same as some other programs.
Now my problem is that I cannot install a new version, nor openoffice, or anything else for that matter that uses windows installer.
I've checked if the service and subservice was running and they were, I've tried SFC /scannow and Dism /Online /Cleanup-Image /RestoreHealth but they both didn't fix the problem ( did fix some corruptions though).
What happens with the installer is basically it doesn't do anything. It just sits at initializing forever and doesn't install anything at all. Currently cannot install any programs but don't want to reinstall windows since I have a lot of programs and settings I don't want to lose.
I have been happily using Windows 8, until today. Out of nowhere I cannot install/update anything (I always get "windows installer has stopped working error", I cannot run any metro apps (they simply crash), and windows itself seems unstable. Is there any other solution, other than formatting harddrive and re-installing everything?
View 3 Replies View RelatedI installed windows 8 and JDK 7 without problems but when i go to install the android SDK tools the installer says to me that can't find Java SE Development Kit.
I downloaded the right version of JDK. Simply the SDK installer can't find C:windowssystem32java.exe when in fact the file is in that folder.
I go to set an environment variable Java_home that point to Java.exe but does not work.
I'm on Windows 8 x64.
Are the files on C:WindowsInstaller needed or they can be removed ?
If yes then how to safely remove them?
After installing Windows 8 in most cases you have to install .Net Framework 3.5 to be able to install or run some 3rd party application. Recently while browsing the internet I came across an offline installer; one that worked perfectly and was very easy to use.
[URL]
Download Microsoft .NET Framework 3.5 Offline Installer for Windows 8
Or
.NET Framework 3.5 Offline Installer for Win8
After last week' update I started seeing a lot of "The start type of the Windows Modules Installer service was changed from auto start to demand start." Even ID 7040 in my system event log.
It triggers when laptop is idle (win 8 pro 64 bit), the CPU usage goes to 30% and higher and the event log gets pounded with the above messages.
Firefox 26.0 64 bit windows installer link? The portable runs fine but it's too much hassle to set as default. Any clean link to FF installer? (Not Pale Moon or Waterfox but the Firefox 26.0 x64)
All I can find is the 26.0 Portable link on Softpedia.
My problem is since updating to 8.1, whenever I fire up IE11 on desktop mode a Windows Installer box shows in the middle of the screen saying "preparing to install" and the box continually flashes and the webpage will not load. Why this happens! IE works fine in metro mode and I cannot find any logs in Event Viewer with regards to this problem.
PC is a Dell XPS8500, seven months old.
After entering a valid retail key into the installer located here I get the following error:
I have tried running the installer on another computer with the same results. I have also tried the netsh command and deleting the Panther folder. The problem arised after doing the trick to download 8.1 with a 8 product key and cancelling the 8.1 installer. It was working yesterday and this morning.
When I get to the part in the Windows 8 installer that it tells me what needs to come to my attention, instead of opening a little browser inside of the program as I guess it's trying to do, it opens up 2 tabs in whatever browser is my default. This would be fine if the buttons in the web pages still modified the actual installer, but they don't and therefore the installer is effectively stopped.
I'm trying to upgrade from Windows 7 to Windows 8. Key word: Upgrade. I would like to avoid re-installing the OS altogether, but I can do that by myself if it comes to that.
Here's what it looks like:
I read on another thread that making IE the default would fix it, but I tried that and it did not work.
I installed Windows 8/8.1 on a system with a Gigabyte GA-Z77X-UD5H MB. When I look at the SSD where Windows is installed I have one partition. I also installed Windows 8/8.1 on an ASRock Z77 OC Formula MB. When I look at the SSD where Windows is installed I have three partitions - 300MB (Recovery Partition), 100MB (EFI System Partition) and 111.27GB (Boot,....Partition). Why did the Windows 8 installer create three partitions on the ASRock system? I think I understand the EFI partition since the ASRock BIOS has a "Load UEFI Defaults" option. The Gigabyte MB does not have this option in the BIOS? Is that because the ASRock MB has truly implemented EFI and uses the EFI System Partition to store boot information?
Why was the Recovery Partition created? I built this system from scratch so there is not any third party involvement. If I reinstall Windows 8 using a new - never used SSD will I get the three partitions? If I format the SSD with one partition prior to Installing Windows 8 what will I get?
I not concerned about the loss of 300MB,why I got different partition configurations on fresh installs of Windows 8 on two different MB's/Systems?
When I download software onto my Windows 8, often there is an .msi file to install the application. When I double-click on the .msi file, I get an error "Error while Opening File". This occurs on various software packages, so is just not a bad download.
When I click "OK" to this error message, I get a big green button on the screen, with "Download" in big letters, and "ilivid" in smaller characters.
I did mistakingly download the ilivid app onto my PC (once again a big green button on a download site that I thought was the download link to the file I wanted, however I uninstalled it once I read some articles online about it, also ran Malwarebytes to check for malware.
Do I need to re-associate the .msi files with the Windows Installer?
With Nero 2014 I was forced to install it in safe mode (I got strange error "1158" otherwise). However when the installation reached MSI files, it was unable to continue.
This REG file below enables MSI installer in Safe Mode and Safe Mode with Networking.
Reboot is required after REG is imported:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBootMinimalmsiserver]
@="Service"
[HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBootNetworkmsiserver]
@="Service"
So today, I installed Comodo internet security and Firewall. It's all installed and working, but upon startup I get this error
"NSIS Error
Error launching installer"
I have followed the instructions from the Windows 7 forum on changing the owner/permissions for a file from Trusted Installer to Administrator but cannot see an EDIT button. I am trying to delete files associated with the Delta Search malware which was detected and deactivated by Malwarebytes.
View 2 Replies View RelatedI recently purchased Knights of the Old Republic 1 & 2 (2 disk set). I have the first one installed but I get the error message- "Error decompressing data. Corrupted installer?" when I get to models.bif during the installation. I am currently using windows 8 (obviously) but the recommended specs for the games say windows 7. I do not know if this would effect the installation, if so is there a way for me to get windows 7?
View 1 Replies View RelatedI have download all update related with windows 8.1 but all of them in .cab file format
Can I customize windows 8.1 installer and add this update into them?
So I can re-install windows 8.1 with all update file?
I have had installer failure for Hp printer software and windows live mail even though signed in as administrator and running the programs as administrator; the failure is the same for both, that is " failure due to lack of privileges to write to C:program dataMicrosoft windowsstart menu".
I have gone to the files and changed permission from read only several times and had it change right back to read only as soon as I closed explorer.
I have gone into uac and disabled notification but it has no effects, and Windows 8 apps still seem to work anyway' so I reset uac to normal level again.
This all seemed to start after a win update, but doing a system restore has not worked either.
For some reason, Windows 8.1. downloader package refuses to see my 8GB SanDisk flash drive as a target for creating bootable Windows 8.1 installer USB media. A 16GB Patriot drive is detected and processed properly, but 8GB SanDisk is ignored. The same is true for the Windows 7 USB/DVD tool.
What could be causing this?
When I create the media on the 16GB drive, only 3+GB is used, which means that 8GB drive should be sufficiently large.
UPDATE: It appears that the SanDisk drive is not detected as "removable", so neither Windows 8 downloader nor Windows 7 USB/DVD tool see it as a valid target. There are quite a few reports of that issue on the Net. So, how do I create a bootable Windows 8.1 install media from that SanDisk drive?
Just updated to Windows 8.1 from Windows 7. But now, after the installation my mic is not working. It stands it is working but is not.
Compaq CQ60-116EO
Windows 8.1 Pro 64bit
Why cd drive not working on windows 8 pro?
View 5 Replies View RelatedUpgrade from Windows 7 Home Ultimate 64 to Windows 8 64 bit
I found suggestions for:
1) Deleting OLE from the Registry under Local Microsoft Software - did not work
2) Create alternate users - did not work
3) User profile change - did not work
4) Change Display settings - did not work
Looking for solution for the not working fastboot / adb in windows 8.1?
It does not work on my HTC One, One S and Desire. Doesn't find any connected devices...
What I did? But it's been happening for a while but now I would like to use the store and still can't...
View 4 Replies View RelatedJust installed Win 8.1 Pro x86 with Update 1 and I disabled UAC, when I try to run calculator there is a message "Calculator do not run if UAC is disabled" and it offers to enable UAC, This do no happen in Win 8.0.
I do not like to use UAC but obviously I need to use calculator.....
I have just bought Dell XPS 12 Duo with Windows 8. I was used to working with Windows 7 and i have few VBS script which worked just fine in Windows 7. Now the same script would not work on Windows 8. How to resolve the problem so that i can run my VB Script.
View 9 Replies View RelatedNeither the start screen nor the search feature within Explorer will return any results if the files I want to look for are on my secondary HDD. This is a bit of a problem as all of my documents, pictures, videos, downloads etc are on this secondary drive.
I can even go into the documents library and search using Explorer, and it still won't find anything that I search for.
I have a lenovo laptop that came with Windows 8 x64.
I used ProduKey to extract the license key of my Windows 8 x64.
I downloaded a Windows 8.1 x64 ISO and tried to do a clean install of Windows 8.1 using a USB. It asked me for a key, so I put in the key that was extracted. It said the key was in valid.
I also went to this website, Upgrade Windows with only a product key - Microsoft Windows Support, and tried to use the key for both Windows 8 and 8.1, but both of them didn't work.
I booted the USB in legacy mode (NOT UEFI mode)
Win 8x64. Just got a UAC flag that Windows backup app wasn't working (see attached). Looking at Windows 7 File Recovery in the CP, all it shows is "Backup or Restore Your Files" at top and the rest of the page, which usually has some choices, is blank. Never seen that before. Rebooted to be sure.
View 4 Replies View RelatedRunning Windows 8 on my ASUS laptop and all of a sudden it has started opening all folders in a new window... every time without fail... even though the folder options are showing "Open in same window" selected.
For the record, I did try unselecting and then reselecting the same window option, applied it to all folders, rebooted my system... and nothing. Everything still opens in a new window every time.