Win 8x64. Just got a UAC flag that Windows backup app wasn't working (see attached). Looking at Windows 7 File Recovery in the CP, all it shows is "Backup or Restore Your Files" at top and the rest of the page, which usually has some choices, is blank. Never seen that before. Rebooted to be sure.
View 4 RepliesI am trying to use Windows Backup in Windows 8 on my HP Envy h8-1414 to my external HD and I get a message saying something like, "Your last backup did not complete." The reason given is The Device is Not Ready or something like that. The error code is 0x80070015. Yet from the Desktop/Computer I can read and write to the external disk with no difficulty.
I don't want to go much further with the set up until until I can make a good backup.
I want to backup my files from my operating systems Windows 8 and mac os Mountain Lion on one external hard drive. How would it be done and what file systems should the partitions be ?
View 3 Replies View RelatedI bought a new laptop(Samsung Notebook NP370R4E) and this laptop doesn't have a dvd rom and does not come with any disc just a preinstalled windows 8. I recently updated my windows 8 to 8.1. I bought an ssd and I want to replace my current hard disk. What I want is to install a fresh windows 8.1 to my ssd without loosing the original os/oem on my laptop is this possible? What are the steps that needs to be taken before removing my current hard disk?
View 9 Replies View RelatedRecently I refreshed my laptop to make it faster(and to remove the viruses/spyware). Before I refreshed it, it has Sony exclusive programs like the VAIO smart network etc. I backup it both manually and with file history. I found the Sony programs and copied it to my computer. The problem is, how do you install it again? I cant find it in the search tab nor I dont know of I can still open it but I know that it is in fact complete. How do you think I should install it and as much as possible I dont want to use the file history method!
View 3 Replies View RelatedI reinstalled windows 8 and in the process made a back up dvd of all my personal files etc. I reinstalled windows 8 and inserted the dvd. When I opened the file it had a lot of wim files and 2 recovery manager files. How do I go about reinstalling these files on my computer?
View 2 Replies View RelatedI tried to start windows 8.1 this morning and it was stuck in a boot loop. System tried to carryout repairs to no avail.
I re-installed Windows and I have some drives that are setup in a raid configuration which has a system image I created some time ago after I performed a fresh install of windows 8.1. However, I can't seem to get recovery to locate it.
Is there a way of restoring from this backup to save my having to install each programme from scratch? The file is 141 gig and is an ADI file with an XML and disk image text file.
I own an OEM Machine which is from Acer.
To ask what is probably well known amongst IT pro's; does a system image backup solution (and consequently a restore from that image if needs be) work on OEM PC's, like a desktop from Acer, actually work without problems, and would I get a proper bootable and working machine after restoration.
Brief scenario - I have used Acronis TI 2014 (Or even the Windows 8.1 system image utility) to create an image of my C: Drive/EFI Partition/Recovery Partition - and backed it up to an external USB HDD.
My OS crashes for whatever reason and I can't boot.
I then either use my Acronis bootable media CD (which I've tested and boots despite all the secure boot/UEFI/GPT mania going about users like myself) to reinstall the Acronis disk image.
OR I use a Widnows 8.1 bootable disk with the ISO (which I've tested to boot) to reinstall the Windows created system image. (I could also use the recovery drive I created in Win 8.1, which just to add, however irrelvanat it might be, includes my OEM factory default partition which was copied as part of the recovery flash drive creation)
Would either of those restore solutions give me a reasonably likely working PC again - taking into account all the stuff I don't understand like the Windows 8.1 OEM key being on the motherboard (which I would understand in terms of Windows activation and authentication could have a negative impact on restoring images over an OEM installed OS and it's partitions)....
I am trying to set up a backup for a Windows 8 ASUS laptop. The backup is to go to a local network shared external drive. The folder for the back up was named Sue_ASUS_bkup and it was mapped as "W". The backup tools > Win 7 file recovery only provides a DVD as a backup location. It does not show a hard drive nor the network location as options.
View 2 Replies View RelatedI have spent most of the past 12 hours trying to restore my win8pro system from a system image. the image was saved to a usb hard drive. win8pro system image recovery won't see the usb hard drive. I tried copying the backup to a drive on my network, but recovery won't see that either, even when entering the exact path to the backup using the network option. I then tried to copy the backup to a second hard drive, installing that hard drive directly into the machine. no go, wouldn't even recognize the drive.
View 9 Replies View RelatedI'm having a problem with Windows System Image Backup just when I try to do a image backup it will say that it has failed and suggest to do a disk check. I've searched and some users say to use third party backup programs should I run the disk check first or just go with a different backup tool.
View 1 Replies View RelatedI'm looking to create a system image of Windows, but my external hard drive already has a bunch of files on the drive. There is plenty of space for the backup, but I'm worried if Windows will format the drive.
View 1 Replies View RelatedAfter upgrading to the Win 8.1 upgrade I can no longer find the full backup selection and clicking on the change backup settings only shows a little clock. Has the backup function been removed from win 8.1?
View 8 Replies View RelatedAfter upgrading to Windows 8.1, System Image Backup failed resulting in the following message:
"The backup failed. There is not enough space to create the volume shadow copy on the storage location. - (0x80780119)"
However, there was enough free space in the external hard disk: 762.82 GB.
Windows Disk Management, and other tools, provided the following information about the partition structure of Disk 0 (238.35 GB):
Type File System Capacity Free Space Recovery NTFS 499 MB 499 MB
EFI System Partition FAT32 300 MB 300 MB Microsoft Reserved Partition Other 128 MB
Recovery (?Volume{792d...) NTFS 350 MB 350 MB Recovery (?Volume{8b75...) NTFS 350 MB 350 MB
Recovery (SAMSUNG_REC2) NTFS 19.72 GB 19.72 GB Recovery (SAMSUNG_REC) NTFS 1.00 GB 1.00 GB
Boot, Page File, Crash Dump, Primary Partition NTFS 216.16 GB 144.76 GB
I am suspicious about having two 350 MB recovery partitions.
I have 3 partitions on my main boot drive. XP SP3, win 8.1 32 bit and win 8.1 64 bit. I ran system image backup in the 64 bit version at 7pm and it took an hour to back up these 3 partitions to another hard drive on my system.
I made some changes to the 64 bit OS so decided to update the image, and ran from the file history window with the same 3 partitions, this time it only took half an hour. I was given an overwrite warning but the last drive to be imaged the 32 bit win 8 seemed to complete very quickly.
If the partition hasn't changed will system image skip it and not overwrite the partition image? I notice there are 3 60gb files on the backup hard disk presumably each partition. I even checked the backup log to confirm the first took one hour and second only took half an hour. Using the get items command for wbadmin it says all three partitions are available for bare metal recovery.
My system is dell xps 8300. I have upgraded from windows 7 ultimate(64bit) to windows 8 pro 64 bit. My system has
1) dell oem partition (no drive ketter 39MB),
2) recovery partition (ntfs no drive letter) 13.25 GB free 2.94 Gb,
3) C drive windows system partition 100Gb free 31,24 GB rest of the two partitions are 175 Gb each (logical drives).
Total my hard disk capacity is 500GB.
What is the difference of taking backup and which is better for recovering the system to original state just before the backup.
1) System image backup(recovery partition & windows system partition) using windows 8 system backup..ie using
windows 7 file recovery menu under control panel.
2) Creating custom recovery image for refresh.(command: recimage -CreateImage)
I have done both and my backup location is external hard drive of 2TB capacity. I made system recovery disk(dvd) from the windows 7 file recovery menu.
The custom recovery image wim file is of size 22.GB
The recovery partition backup(vhdx) is of 9GB and the windows system partition backup is of 43GB.
I have also used macurium reflect pro to take backup of my recovery and windows partition using macurium rescue cd.
My windows 8 pro install messed up n i have almost 2.8tb of stuff on my drive on a 3tb hd. I have an identical hd as a backup which i have (an apparently successful) a backup of my system from a couple of weeks ago on. I had set the system to do scheduled backups of the system (set to backup a system image of efi partition and c. There were a few times where i was trying to get other things done and the systemwas running slow so i cancelled the backups when i noticed them running. The software stopped the backups (seemingly successfully).
As i say my system messed up - i came home to find out it was no longer downloading (as i had left it doing when i went to work) but was on a blue screen (bsod?) saying the system needs to be restarted. Since then it didnt work well at all and after dskchk reported that several sectors were damaged so it was moving data to spare sectors (or whatever it generally reports when this happens) there were a lot of files messed up or reported as deleted when doing a file recovery scan with recuvva.
So i decided to restore the backed up system image from the other hd. Incidentally i tried mounting the vhdx backup image from that hd via windows explorer which then reported "the disk needs formatting" and didnt get any success mounting via disk management either (it mounted in the app but didnt show up on windows explorer and if i tried to access info on it via disk management it reported the same"disk needs formatting prompt".
So when i booted my win 8 dvd it didnt work cos the dvd wasnt an efi booting version so i had to boot from a usb version with the efi bit included.
I formatted the system drive and chose to do an image restore. It started doing the restore (apparently) but every time i came back to it later i had the follwing error:
"Re-image your computer
The system image restore failed.
Error details: The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria Ox80073B92"
It took me so long to set up my system n i have a lot of my own data on there too. The system drive I formatted was created in diskpart and then re formatted with "format" command (as it created the disk in raw mode) so now it is ntfs mode (uncompressed).
Windows 8 Backup has been working fine for 12 months to an external Seagate USB hard drive.I'm now getting a "device not ready" message with error code 0x80070015 and the backup fails within 30 secs of starting. I've checked the drive for errors and there are no problems. I can read /write files to the external drive. There is ample spare space on the external drive to store the backup file. How to investigate and solve this problem.
View 4 Replies View RelatedI started to use the "Create System Image" of the "Windows 7 File Recovery" on my Windows 8 laptop. But after the screen which flashes the total size that would be required, when I ask it to start the process expecting it to prompt me for the 1st DVD, it flashes the message, - "The back-up failed. The system is not ready. (0x80070015) " . I am trying this on an out-of-the-box laptop with pre-installed Windows 8. Also tried it by disabling the anti-virus, but to no avail.
Then I tried to start the process with a 4.7 GB blank DVD already in place. Then it flashed the message "Insert a blank media bigger than 1 GB". Since I expected it take anywhere between 3-8 DVDs, I kept about 9 DVDs ready. I also inserted a USB pen-drive of 16 GB and tried to create the system image. Again it flashed the same message of insert a blank media greater than 1 GB in F: (same drive as USB) -??????? I mean the USB is already in place and has been assigned the drive letter as F:. How can I insert a blank media there ??
I am using Windows 8 Single Language. I was able create a repair disc without issues, though.
I can't get windows 8.1 system image to burn to my backup drive it says access denied for some reason or another, and i can't get it to burn to dvd-r ether. I want to do a image of my drive.
View 6 Replies View RelatedI am having trouble with a message in Action Center in Windows 8.1. It is saying "Check Backup Disk Space" and I cannot hide the message. I had Windows 7 File Recovery setup with Windows 8.1, but now after the upgrade, the message is "stuck." Can this be fixed? These two links explain it perfectly:
Windows 8.1 Update - Check backup disk space - Microsoft Community
Windows 8.1, can't remove "Check backup disk space" error in action center -
On a friend's new Dell Windows 8 desktop I tried to create a system image using Windows 7 File Recovery. I got a message saying it could not create the image. The message said "windows backup failed to get an exclusive lock on the efi system partition".
View 9 Replies View RelatedI have just upgraded from windows 8 to windows 8.1.I now find I cant back up my pc.I have tried 3 separate external drives to download to but each time I get the message I/o device error 0x8007045D.
View 3 Replies View RelatedEaseusToDo backup gives me the following error. I use security tab to allow access to everyone and still get this error. Can I run the backup in the built in admin account? I have tried system backup and Disk and Partition backup and get the same error message. This is an hd in an enclosure with a sata connection.
View 9 Replies View RelatedA week ago or so I had a machine failure. I had all the documents saved. It took me quite a long time to get me up and running on another machine. At the moment I'm interested in finding out if there is a possibility to backup/clone a finished installed system to a usb(bootable) drive.
In case of failure of a machine a bootable usb drive would give the option of continuing the basic work. At least you could instantly communicate with clients and so on till the new machine is installed. My Mac friend uses Superduper. What are the options in Windows 8? What 3party programs would be capable to do that?
I have a the Dell 15R SE 7520 which came preloaded with windows 8 . Recently I upgraded to windows 8.1 . My questions are -
1. What should I create - a rescue disk or a recovery disk ?
2. If I create a recovery disk, will it recover my windows 8.1(not windows 8) in case my OS gets corrupted .
3. I also couldn't find the product key for my OS. So , If someday I have to repair my laptop using my recovery disk ,it will not stay genuine?
I initially started a File History backup 6 days ago and when I open File History from the control panel it still says "Files last copied on 'and the original date'. I have set a daily preference for backing up so shouldn't the date change each day? When I click on the "run now" link a line appears saying "File History is saving copies of your files", but after about 10 seconds that line is gone and it goes back to "run now". So, it is not saving copies of my files.
I have a brand new Western Digital 3T My Book external hard drive that has the initial "File History" folder and backup on it, but if it's not going to update/backup and just stays as it, is it isn't going to be very useful.
Why won't it backup even when I click the "run now" link?
previously i was using windows 7 home basic 64bit OS. My battery used to give an average backup of about 2 hours. But since the time i have installed windows 8,it gives a backup of hardly an hour. I have checked all the settings in the control panel. They are all fine and proper. The fan keeps making a buzzing sound all the time, even when the CPU usage is low. This was not the case earlier. Also, my laptop is getting heated up more compared to before. What shall i do? What steps shall i take?
View 2 Replies View RelatedMy prior pc had some major issues (win7) while I had an external WD backup drive attached. During my troubleshooting I had reinstalled win7 and hooked my backup drive back onto the system. At the time I had not taken the time to restore or take ownership of the backup drive/files. It ran fine for a while with backups occurring regularly when finally it had major motherboard issues at which point I gave up and purchased a new Dell PC with Windows 8 (one I'm using now).
After setting it up I proceeded to connect the external backup drive and restore the folder I really needed as it contained all the photos, files, music, etc from the old pc. After doing so I was able to open/view the files that were backed up on my old pc AFTER I had reinstalled win7 but could not view the older backed up files/images etc. I then used the take ownership steps in this tread but this did not appear to work either. When I attempt to open the restored files/folders from my prior pc that are older I only get a default image of the Windows 8 icon for that file. get access to all my backed up files?
Today while casually browsing the iNet my Music suddenly stopped playing and while at first I believed it to be an issue with Xbox Music I later discovered that the Culprit was actually one of my RAID0 HDD's which decided to go AWOL - The Intel RST Manager confirmed this by showing that the 4th Drive ( I'm running two separate RAID0 with two drives each ) was missing.
A restart didn't solve the issue at first but physically removing the affected RAID and installing it back again using the SATA connectors of the other RAID0 for testing did. Interestingly enough even now that I installed everything back like it was before it appears to be fine
Right now I'm considering in converting my second PC into a BackUp System itself by getting large enough HDD's, install them into the primary PC first in order to quickly copy all the files and then move them into the secondary PC.
From there one I plan to use BTSync which is technically not a BackUp software but pretty much behaves like one as it simply copies all files of a selected folder from the primary PC to the secondary PC which it cannot find there in an actual version.
New to Windows 8 - setting up a couple computers .Can I use one external HDD for the backup as well as for the recovery? I mean, it seems when I set up the first one a week ago, there was an option in the recovery section of control panel to create something for disaster recovery. (Create a recovery drive) I think it said everything on the drive would be erased when it was created. Now that I've created it on a 250GB HDD, I am wondering if I can do my backups on there as well? Or is this recovery drive supposed to be a dedicated flash drive or something like that?
View 5 Replies View Related